Vyacheslav Andreev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Vyacheslav Andreev has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Alexandr Alexandrovich Sataev
Nizhny Novgorod State Technical University n. a. R.E. Alekseev
4 shared publications - Denis Toskin
Nizhny Novgorod State Technical University n.a. R.E. Alekseev
4 shared publications - Iuliia Tarasova
Nizhny Novgorod State University of Architecture and Civil Engineering
3 shared publications - Olga Andreeva
Nizhny Novgorod State Technical University n.a. R.E. Alekseev
3 shared publications - Andrey Suvorov
ANO VO “Russian New University
2 shared publications - Andrey Vyacheslavovich Chechin
Nizhny Novgorod State University of Architecture and Civil Engineering
2 shared publications
Latest Publications
- Open Access
Assessing and Forecasting Fatigue Strength of Metals and Alloys under Cyclic Loads
Within the scope of this research, patterns of changes in the fatigue life and limit of metals under cyclic stress were identified and the most informative parameters were determined as the basis for developing a method for the universal transformation of experimental data on the fatigue of metals and alloys for their subsequent generalization. Experimental data on metal fatigue, obtained by a large number of authors for a wide range of grades of steels and alloys, under the influence of various combinations of factors, were systematized. A generalized dependence of the recalculated parameters of fatigue life and limit was obtained, its characteristics were assessed, and a sensitivity analysis was performed, confirming the universal nature of the obtained dependence. A system of parameters has been proposed making it possible to consider and forecast high-cycle fatigue processes for a wide range of metals and alloys, under the conditions of various combinations of operating factors, from unified positions and a more general point of view.
Open AccessAssessing and Forecasting Fatigue Strength of Metals and Alloys under Cyclic Loads
Within the scope of this research, patterns of changes in the fatigue life and limit of metals under cyclic stress were identified and the most informative parameters were determined as the basis for developing a method for the universal transformation of experimental data on the fatigue of metals and alloys for their subsequent generalization. Experimental data on metal fatigue, obtained by a large number of authors for a wide range of grades of steels and alloys, under the influence of various combinations of factors, were systematized. A generalized dependence of the recalculated parameters of fatigue life and limit was obtained, its characteristics were assessed, and a sensitivity analysis was performed, confirming the universal nature of the obtained dependence. A system of parameters has been proposed making it possible to consider and forecast high-cycle fatigue processes for a wide range of metals and alloys, under the conditions of various combinations of operating factors, from unified positions and a more general point of view.
- 12 January 2023
- Published by Voronezh Institute of High Technologies in МОДЕЛИРОВАНИЕ, ОПТИМИЗАЦИЯ И ИНФОРМАЦИОННЫЕ ТЕХНОЛОГИИ
- Vol. 11 (1(40)) , 4-5
Modeling and visualization of thermohydraulic processes under the influence of external dynamic forces
В статье рассматривается актуальная проблема учета воздействия внешних динамических сил на теплогидравлические процессы. К ним относятся процессы естественной циркуляции, перемешивания теплоносителя в оборудовании ядерных энергетических установок, процессы сепарации пара, режимы работы систем подогрева высоковязких сред, работа абсорбционных холодильных приборов, установленных на малых и больших морских судах. Ведущим подходом к исследованию данной проблемы является экспериментальный метод, позволяющий комплексно рассмотреть данные процессы на мелкомасштабных моделях. Для этого был разработан экспериментальный стенд оригинальной конструкции. Параметры, полученные в ходе работы, были визуализированы и преобразованы в графические изображения, которые анализировались с помощью библиотеки компьютерного зрения с открытым исходным кодом OpenCV. Предложен новый метод визуализации процессов смешения неизотермических течений, результатом применения которого явились интегральные и локальные характеристики данного процесса. Из полученных результатов заметно, что режимы периодической качки и статического крена оказывают существенное влияние на процессы смешения неизотермических потоков теплоносителя. Проанализировав полученные графические изображения, были выявлены области неравномерного перемешивания, находящиеся в прямой корреляции с условиями внешних динамических воздействий. Апробированные в процессе исследования процессов смешения неизотермических потоков методики могут быть использованы и в других приложениях для решения схожих задач. The article deals with the relevant issue related to accounting for the impact of external dynamic forces on thermal-hydraulic processes. These include processes of natural circulation, mixing of the coolant in the equipment of nuclear power plants, steam separation processes, operating modes of heating systems for high-viscosity media, operation of absorption refrigeration devices installed on small and large sea vessels. The principal approach to researching this problem is the experimental method which makes it possible to comprehensively consider these processes on small-scale models. For this, an experimental stand of an original design was developed. The parameters obtained during the operation were visualized and converted into graphic images, which were analyzed using the open-source computer vision library OpenCV. A new method for visualization of mixing processes of non-isothermal flows is proposed, the implementation of which resulted in the integral and local characteristics of this process. It is evident from the findings that the modes of periodic rolling and static roll have a significant effect on the mixing processes of non-isothermal coolant flows. After analyzing the obtained graphic images, areas of uneven mixing were identified, which are in direct correlation with the conditions of external dynamic influences. The techniques tested in the study of mixing processes of non-isothermal flows can be used in other applications to solve similar problems.
- 12 January 2023
- Published by Voronezh Institute of High Technologies in МОДЕЛИРОВАНИЕ, ОПТИМИЗАЦИЯ И ИНФОРМАЦИОННЫЕ ТЕХНОЛОГИИ
- Vol. 11 (1(40)) , 4-5
Modeling and visualization of thermohydraulic processes under the influence of external dynamic forces
В статье рассматривается актуальная проблема учета воздействия внешних динамических сил на теплогидравлические процессы. К ним относятся процессы естественной циркуляции, перемешивания теплоносителя в оборудовании ядерных энергетических установок, процессы сепарации пара, режимы работы систем подогрева высоковязких сред, работа абсорбционных холодильных приборов, установленных на малых и больших морских судах. Ведущим подходом к исследованию данной проблемы является экспериментальный метод, позволяющий комплексно рассмотреть данные процессы на мелкомасштабных моделях. Для этого был разработан экспериментальный стенд оригинальной конструкции. Параметры, полученные в ходе работы, были визуализированы и преобразованы в графические изображения, которые анализировались с помощью библиотеки компьютерного зрения с открытым исходным кодом OpenCV. Предложен новый метод визуализации процессов смешения неизотермических течений, результатом применения которого явились интегральные и локальные характеристики данного процесса. Из полученных результатов заметно, что режимы периодической качки и статического крена оказывают существенное влияние на процессы смешения неизотермических потоков теплоносителя. Проанализировав полученные графические изображения, были выявлены области неравномерного перемешивания, находящиеся в прямой корреляции с условиями внешних динамических воздействий. Апробированные в процессе исследования процессов смешения неизотермических потоков методики могут быть использованы и в других приложениях для решения схожих задач. The article deals with the relevant issue related to accounting for the impact of external dynamic forces on thermal-hydraulic processes. These include processes of natural circulation, mixing of the coolant in the equipment of nuclear power plants, steam separation processes, operating modes of heating systems for high-viscosity media, operation of absorption refrigeration devices installed on small and large sea vessels. The principal approach to researching this problem is the experimental method which makes it possible to comprehensively consider these processes on small-scale models. For this, an experimental stand of an original design was developed. The parameters obtained during the operation were visualized and converted into graphic images, which were analyzed using the open-source computer vision library OpenCV. A new method for visualization of mixing processes of non-isothermal flows is proposed, the implementation of which resulted in the integral and local characteristics of this process. It is evident from the findings that the modes of periodic rolling and static roll have a significant effect on the mixing processes of non-isothermal coolant flows. After analyzing the obtained graphic images, areas of uneven mixing were identified, which are in direct correlation with the conditions of external dynamic influences. The techniques tested in the study of mixing processes of non-isothermal flows can be used in other applications to solve similar problems.
- 1 January 2023
- Published by Keldysh Institute of Applied Mathematics
Forecasting and Management of the Process of Career Guidance Classification in Groups of Technical Specialties
This paper is devoted to the evaluation of the results of the introduction of the ColourUnique Pro career guidance software package into the process of career guidance support in control groups of subjects tested on the basis of the technical University. The peculiarity of the testing methodology used in the research is the generation by the subject of a unique color image that characterizes the individual style of activity. The types of personalities that are more common in creative and technical environments have been derived, which allows forecasting and management in the process of career guidance support of an individual. However, in a larger sample, a previously rarely encountered type of individual made itself felt, which was not previously considered characteristic of the technical environment, which may be erroneous. In the paper, the authors make the assumption that they can predict such images.
- 1 January 2023
- Published by Keldysh Institute of Applied Mathematics
Forecasting and Management of the Process of Career Guidance Classification in Groups of Technical Specialties
This paper is devoted to the evaluation of the results of the introduction of the ColourUnique Pro career guidance software package into the process of career guidance support in control groups of subjects tested on the basis of the technical University. The peculiarity of the testing methodology used in the research is the generation by the subject of a unique color image that characterizes the individual style of activity. The types of personalities that are more common in creative and technical environments have been derived, which allows forecasting and management in the process of career guidance support of an individual. However, in a larger sample, a previously rarely encountered type of individual made itself felt, which was not previously considered characteristic of the technical environment, which may be erroneous. In the paper, the authors make the assumption that they can predict such images.
- 9 June 2022
- Published by Marine Intellectual Technologies in MORSKIE INTELLEKTUAL`NYE TEHNOLOGII
- No. 2(56),p. 155-161
System research of heat exchange processes under forced and natural circulation under external dynamic impact
- 9 June 2022
- Published by Marine Intellectual Technologies in MORSKIE INTELLEKTUAL`NYE TEHNOLOGII
- No. 2(56),p. 155-161
System research of heat exchange processes under forced and natural circulation under external dynamic impact
- 1 January 2022
- Published by Keldysh Institute of Applied Mathematics
Providing Decision Support in Career Guidance Through the use of Machine Vision
This paper is devoted to the review of the results of the development and implementation of the ColorUnique Pro career guidance software package in the career guidance activities of higher educational institutions. The review begins with the initial formulation of the problem, justification of the use of neural networks as the basis of one of the classifiers, consideration of the results of experiments and then – the introduction of a software package. At the end of the article, prospects for further research are described, such as the creation of a three-dimensional map of types and subtypes and the further identification of new subtypes. The possibility of using additional methods of analysis, detection and classification is also being considered in order to study the influence on the definition of ISA of such features of the images obtained as «demonstrative» and «true» structures, as well as the presence of a «background» that does not contain characteristic elements. In addition to neural networks, the authors also used the «sliding» window image processing method, as a result, the software package includes two classifiers that analyze images separately, however, in the future, the results of the analysis of both classifiers are compared by an expert, since some subtypes can only be determined by joint interpretation.
- 1 January 2022
- Published by Keldysh Institute of Applied Mathematics
Providing Decision Support in Career Guidance Through the use of Machine Vision
This paper is devoted to the review of the results of the development and implementation of the ColorUnique Pro career guidance software package in the career guidance activities of higher educational institutions. The review begins with the initial formulation of the problem, justification of the use of neural networks as the basis of one of the classifiers, consideration of the results of experiments and then – the introduction of a software package. At the end of the article, prospects for further research are described, such as the creation of a three-dimensional map of types and subtypes and the further identification of new subtypes. The possibility of using additional methods of analysis, detection and classification is also being considered in order to study the influence on the definition of ISA of such features of the images obtained as «demonstrative» and «true» structures, as well as the presence of a «background» that does not contain characteristic elements. In addition to neural networks, the authors also used the «sliding» window image processing method, as a result, the software package includes two classifiers that analyze images separately, however, in the future, the results of the analysis of both classifiers are compared by an expert, since some subtypes can only be determined by joint interpretation.
- 1 January 2022
- Published by Keldysh Institute of Applied Mathematics
Computer Modelling Based on the Percolation Theory of the Third Stage of Cracks Formation and Development on the Steel Microstructures Surfaces
The modeling of the process of destruction of structural materials under cyclic loads in the field of high-cycle fatigue was considered. A phenomenological analysis of the main stages of the formation of cracks, mechanisms and schemes of their initiation, formed in the process of destruction of real objects, was carried out. The implementation of these mechanisms using the tools of the percolation theory made it possible to increase the reliability of modeling the processes occurring in real conditions during the destruction of a structure. The parameter of the model of damage accumulation on the images of the microstructure of the surface of metals and alloys was formulated, which makes it possible to detect the moment of completion of the formation of a crack. The fractal dimension of the percolation cluster obtained on the cells belonging to the damage was chosen as a parameter. To calculate the sizes of percolation clusters the Hoshen – Kopelman multiple labeling algorithm was used. The existing algorithm was supplemented with an auxiliary label for open cells belonging to the percolation cluster, which made it possible to get rid of the additional operation of comparing labels and re-marking nodes when combining parts of a single cluster. To confirm the effectiveness of the proposed parameter, simulation the process of damage accumulation on images of the surface microstructure was made. The magnitude of the error did not exceed 6.6% for calculations using the values of the fractal dimension of percolation clusters built on the cells belonging to the crack.
- 1 January 2022
- Published by Keldysh Institute of Applied Mathematics
Computer Modelling Based on the Percolation Theory of the Third Stage of Cracks Formation and Development on the Steel Microstructures Surfaces
The modeling of the process of destruction of structural materials under cyclic loads in the field of high-cycle fatigue was considered. A phenomenological analysis of the main stages of the formation of cracks, mechanisms and schemes of their initiation, formed in the process of destruction of real objects, was carried out. The implementation of these mechanisms using the tools of the percolation theory made it possible to increase the reliability of modeling the processes occurring in real conditions during the destruction of a structure. The parameter of the model of damage accumulation on the images of the microstructure of the surface of metals and alloys was formulated, which makes it possible to detect the moment of completion of the formation of a crack. The fractal dimension of the percolation cluster obtained on the cells belonging to the damage was chosen as a parameter. To calculate the sizes of percolation clusters the Hoshen – Kopelman multiple labeling algorithm was used. The existing algorithm was supplemented with an auxiliary label for open cells belonging to the percolation cluster, which made it possible to get rid of the additional operation of comparing labels and re-marking nodes when combining parts of a single cluster. To confirm the effectiveness of the proposed parameter, simulation the process of damage accumulation on images of the surface microstructure was made. The magnitude of the error did not exceed 6.6% for calculations using the values of the fractal dimension of percolation clusters built on the cells belonging to the crack.
- 1 January 2022
- Published by Keldysh Institute of Applied Mathematics
Methodology of Visualization of non-Isothermal Mixing Processes Under the Influence of External Dynamic Forces
This article considers the problem of taking into account the influence of a change in spatial orientation on thermal-hydraulic processes. To obtain the parameters of non-isothermal mixing and create a database of these processes, first of all, an experimental method was used to study these processes on a small-scale model. The obtained parameters were visualized and further graphic images were analyzed using the OpenCV library (Open Source Computer Vision Library - an open source computer vision library). A new approach to visualization of mixing processes of non- isothermal flows is proposed. The result of this analysis was the integral and local characteristics of the process of non-isothermal mixing of flows. To assess the degree of influence of a change in the nature of the problem on the integral characteristics of the process of mixing of non-isothermal flows, a series of experiments was carried out for various types of problems. The research is limited by the scale of the model, and there is also a need to develop other criteria for assessing the nonisothermal mixing of flows under the influence of external forces. The value of the article is a new approach to the evaluation of non-isothermal mixing processes. The analysis of the obtained images makes it possible to study the process of non-stationary heat transfer under the conditions of external dynamic influences and to identify areas of non-uniform mixing.
- 1 January 2022
- Published by Keldysh Institute of Applied Mathematics
Methodology of Visualization of non-Isothermal Mixing Processes Under the Influence of External Dynamic Forces
This article considers the problem of taking into account the influence of a change in spatial orientation on thermal-hydraulic processes. To obtain the parameters of non-isothermal mixing and create a database of these processes, first of all, an experimental method was used to study these processes on a small-scale model. The obtained parameters were visualized and further graphic images were analyzed using the OpenCV library (Open Source Computer Vision Library - an open source computer vision library). A new approach to visualization of mixing processes of non- isothermal flows is proposed. The result of this analysis was the integral and local characteristics of the process of non-isothermal mixing of flows. To assess the degree of influence of a change in the nature of the problem on the integral characteristics of the process of mixing of non-isothermal flows, a series of experiments was carried out for various types of problems. The research is limited by the scale of the model, and there is also a need to develop other criteria for assessing the nonisothermal mixing of flows under the influence of external forces. The value of the article is a new approach to the evaluation of non-isothermal mixing processes. The analysis of the obtained images makes it possible to study the process of non-stationary heat transfer under the conditions of external dynamic influences and to identify areas of non-uniform mixing.
- Open Access
- 21 December 2021
- Published by Krylov State Research Centre in Transactions of the Krylov State Research Centre
- Vol. S-I (2)
Development of test facilities and procedure for system-based assessment of spatial orientation changes upon thermohydraulic processes
This paper discusses thermohydraulic processes in marine nuclear reactor in order to develop test models and testing methods for assessment of unsteady thermohydraulic processes in the hydraulic circuit of nuclear reactor taking into account external dynamic factors typical for marine environments, like motions and heel. This work was an experimental study on non-isothermal mixing in one and two motion planes, and mostly followed experimental methods (thermal probing), as well as the methods of visualization and system analysis. Non-isothermal mixing of flows in the channel of marine nuclear power plant was investigated for both static conditions and dynamic environment (uni- and bi-planar motions), which yielded a generalized model of motion effects upon thermohydraulic processes. Visualization methods served to identify hot/cold areas. The study also highlighted how spatial orientation of the reactor’s flow channel changes thermal parameters exactly at the boundary of thermal front. It is shown that flow channel of marine nuclear power plant is a complex unsteady system. Motion tests are practicable to perform varying not only the amplitude (angle) of motions, but also their period, as well as to discriminate between high- and low-frequency motions and investigate joint effect of different motion types that have to be simulated and analysed in its own way.
- 21 December 2021
- Published by Krylov State Research Centre in Transactions of the Krylov State Research Centre
- Vol. S-I (2)
Open AccessDevelopment of test facilities and procedure for system-based assessment of spatial orientation changes upon thermohydraulic processes
This paper discusses thermohydraulic processes in marine nuclear reactor in order to develop test models and testing methods for assessment of unsteady thermohydraulic processes in the hydraulic circuit of nuclear reactor taking into account external dynamic factors typical for marine environments, like motions and heel. This work was an experimental study on non-isothermal mixing in one and two motion planes, and mostly followed experimental methods (thermal probing), as well as the methods of visualization and system analysis. Non-isothermal mixing of flows in the channel of marine nuclear power plant was investigated for both static conditions and dynamic environment (uni- and bi-planar motions), which yielded a generalized model of motion effects upon thermohydraulic processes. Visualization methods served to identify hot/cold areas. The study also highlighted how spatial orientation of the reactor’s flow channel changes thermal parameters exactly at the boundary of thermal front. It is shown that flow channel of marine nuclear power plant is a complex unsteady system. Motion tests are practicable to perform varying not only the amplitude (angle) of motions, but also their period, as well as to discriminate between high- and low-frequency motions and investigate joint effect of different motion types that have to be simulated and analysed in its own way.
- 1 January 2021
- Published by Keldysh Institute of Applied Mathematics
Algorithms for Automated Differentiation of Subtypes and Improving the Overall Accuracy of Image Classification in Career Guidance
The paper discusses the problems and prospects of implementing a hybrid classifier for career guidance testing according to the author's method «Associative color space». The authors set themselves the following goals: to increase the accuracy of determining the main classes and to identify subtypes that have visual similarities, but significant differences in terms of the characteristics of the work style. To improve the accuracy of determining the problem class of images, 11 special filters were developed and implemented in order to identify implicit features of the class. The use of these filters additionally solved the problem of distinguishing visually similar subtypes of the two main classes, which makes it possible to further automate not only the definition of the main class with optimal accuracy, but also the subtype, which will allow for a more thorough diagnosis of career guidance and provide the subjects with more specific characteristics and recommendations regarding their work style. Analyzing the results of the experiments, the authors hypothesized about the possibility of creating a three-dimensional map of types and subtypes, where there could be areas of pronounced types, subtypes, as well as transitional types with special characteristics that allow avoiding the result of a «mixed» type for the subjects.
- 1 January 2021
- Published by Keldysh Institute of Applied Mathematics
Algorithms for Automated Differentiation of Subtypes and Improving the Overall Accuracy of Image Classification in Career Guidance
The paper discusses the problems and prospects of implementing a hybrid classifier for career guidance testing according to the author's method «Associative color space». The authors set themselves the following goals: to increase the accuracy of determining the main classes and to identify subtypes that have visual similarities, but significant differences in terms of the characteristics of the work style. To improve the accuracy of determining the problem class of images, 11 special filters were developed and implemented in order to identify implicit features of the class. The use of these filters additionally solved the problem of distinguishing visually similar subtypes of the two main classes, which makes it possible to further automate not only the definition of the main class with optimal accuracy, but also the subtype, which will allow for a more thorough diagnosis of career guidance and provide the subjects with more specific characteristics and recommendations regarding their work style. Analyzing the results of the experiments, the authors hypothesized about the possibility of creating a three-dimensional map of types and subtypes, where there could be areas of pronounced types, subtypes, as well as transitional types with special characteristics that allow avoiding the result of a «mixed» type for the subjects.
- 1 January 2021
- Published by Keldysh Institute of Applied Mathematics
Using a Variational Autoencoder in the Task of Overlaying Multiple Images
The possibility and expediency of using variational autoencoders when expanding training datasets of neural networks for cases when the training set consists of several dozen samples is tested. Investigations are carried out on the example of images of «crack»-type defects. Brief information on the theory of variational autoencoders is given. Practical recommendations are given for constructing training sets of variational autoencoders. It is shown that deviation from the suggested recommendations will most likely not allow generating realistic images for the case of a small dataset. For the case of a dataset of eighty images, the distribution of «crack»- type defects in the hidden space after training the variational autoencoder is demonstrated. Examples of images with defects sampled from different parts of the distribution of latent factors are given. For the case of images of cracks, the continuity of the hidden space is demonstrated, when one image is sufficiently smoothly transformed into another on the way through the space of hidden features. A method for obtaining superimposed images based on the use of variational autoencoders is proposed. This method seems to be promising, since it allows automating the process of obtaining superimposed images. Examples of generated cracked superimposed images are shown.
- 1 January 2021
- Published by Keldysh Institute of Applied Mathematics
Using a Variational Autoencoder in the Task of Overlaying Multiple Images
The possibility and expediency of using variational autoencoders when expanding training datasets of neural networks for cases when the training set consists of several dozen samples is tested. Investigations are carried out on the example of images of «crack»-type defects. Brief information on the theory of variational autoencoders is given. Practical recommendations are given for constructing training sets of variational autoencoders. It is shown that deviation from the suggested recommendations will most likely not allow generating realistic images for the case of a small dataset. For the case of a dataset of eighty images, the distribution of «crack»- type defects in the hidden space after training the variational autoencoder is demonstrated. Examples of images with defects sampled from different parts of the distribution of latent factors are given. For the case of images of cracks, the continuity of the hidden space is demonstrated, when one image is sufficiently smoothly transformed into another on the way through the space of hidden features. A method for obtaining superimposed images based on the use of variational autoencoders is proposed. This method seems to be promising, since it allows automating the process of obtaining superimposed images. Examples of generated cracked superimposed images are shown.