Hamza Boulika
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hamza Boulika has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
A. Zerouale
Processes, Materials, and Environment Laboratory (PMEL), Faculty of Sciences and Techniques, Sidi Mohammed Ben Abdellah University, Atlas, Morocco
3 shared publications- Fehmi Boufahja
Biology Department, College of Science, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, 11623, Saudi Arabia
3 shared publications M. El Hajam
Signals, Systems, and Components Laboratory (SSCL), Faculty of Sciences and Techniques, Sidi Mohammed Ben Abdellah University, Atlas, Morocco
3 shared publicationsM. Hajji Nabih
Signals, Systems, and Components Laboratory (SSCL), Faculty of Sciences and Techniques, Sidi Mohammed Ben Abdellah University, Atlas, Morocco
3 shared publications- Meryem Hajji Nabih
Signals, Systems and Components Laboratory (SSC), Faculty of Sciences and Techniques, Sidi Mohamed Ben Abdellah University, Route Imouzzer , BP2202, Atlas , FEZ , Morocco
3 shared publications N. Idrissi Kandri
3 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Ultrasonic-assisted desorption of iron and chromium from activated carbon: Box–Behnken optimization, kinetic and thermodynamic analysis
- 7 July 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessUltrasonic-assisted desorption of iron and chromium from activated carbon: Box–Behnken optimization, kinetic and thermodynamic analysis
- 16 October 2024
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 16 (4) , 1745-1761
Almond Hulls and Shells Extract Characterized as a High-Performance Eco-Friendly Antioxidant and Corrosion Inhibitor
- 16 October 2024
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 16 (4) , 1745-1761
Almond Hulls and Shells Extract Characterized as a High-Performance Eco-Friendly Antioxidant and Corrosion Inhibitor
- Open Access
- 6 February 2024
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (3) , 4083
Correction to: Physico-chemical properties and valorization perspectives of almond residues (shells & hulls) in the northern Morocco: a comparative study
- 6 February 2024
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (3) , 4083
Open AccessCorrection to: Physico-chemical properties and valorization perspectives of almond residues (shells & hulls) in the northern Morocco: a comparative study
- 16 January 2024
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (3) , 4073-4082
Physico-chemical properties and valorization perspectives of almond residues (shells & hulls) in the northern Morocco: a comparative study
- 16 January 2024
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (3) , 4073-4082
Physico-chemical properties and valorization perspectives of almond residues (shells & hulls) in the northern Morocco: a comparative study
- Open Access
- 1 January 2024
- Published by Walter de Gruyter GmbH in Open Chemistry
- Vol. 22 (1)
Development and characterization of new ecological adsorbents based on cardoon wastes: Application to brilliant green adsorption
This study aimed to develop four adsorbents, neat and activated, from the cardoon leaves and stems. The developed adsorbents were first analyzed to determine the surface acid–base properties using Boehm’s method, pH at zero charge point, iodine and methylene blue values, and moisture, ash, and fixed carbon contents. They were also characterized by scanning electron microscopy coupled with energy-dispersive X-ray analysis, X-ray diffraction, Fourier transform infrared absorption spectroscopy, thermogravimetric analysis, and inductively coupled plasma atomic emission spectroscopy. After that, these adsorbents were applied for adsorption of an organic dye “brilliant green” (BG), and the effect of various parameters on the adsorption efficiency was evaluated. The obtained results revealed the differences between the adsorbents derived from the neat cardoon leaves and stems and their activated carbon in terms of properties and BG adsorption efficiency.
- 1 January 2024
- Published by Walter de Gruyter GmbH in Open Chemistry
- Vol. 22 (1)
Open AccessDevelopment and characterization of new ecological adsorbents based on cardoon wastes: Application to brilliant green adsorption
This study aimed to develop four adsorbents, neat and activated, from the cardoon leaves and stems. The developed adsorbents were first analyzed to determine the surface acid–base properties using Boehm’s method, pH at zero charge point, iodine and methylene blue values, and moisture, ash, and fixed carbon contents. They were also characterized by scanning electron microscopy coupled with energy-dispersive X-ray analysis, X-ray diffraction, Fourier transform infrared absorption spectroscopy, thermogravimetric analysis, and inductively coupled plasma atomic emission spectroscopy. After that, these adsorbents were applied for adsorption of an organic dye “brilliant green” (BG), and the effect of various parameters on the adsorption efficiency was evaluated. The obtained results revealed the differences between the adsorbents derived from the neat cardoon leaves and stems and their activated carbon in terms of properties and BG adsorption efficiency.
- Open Access
Successive Solvent Extraction, Characterization and Antioxidant Activities of Cardoon Waste (Leaves and Stems) Extracts: Comparative Study
The main interest in the valorization of vegetable wastes is due to the peculiarity of their chemical composition in substances that present important properties. Among these substances, antioxidants could replace those industrially manufactured. In the present study, three solvents of different polarities (hexane, ethanol, and water) were applied for the extraction of phenolic compounds from Cynara cardunculus L. waste using two extraction methods: Soxhlet Extraction (SE) and Ultrasonic-Assisted Extraction (UAE). The obtained extracts were then characterized by Fourier-Transform Infrared (FTIR) spectroscopy and spectrophotometric determination of Total Phenolics (TPC), Total Flavonoids (TFC), and Condensed Tannins (CT). Total Antioxidant Capacity (TAC) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity of ethanol and water extracts of leaves and stems were also evaluated. High extraction yields were obtained by UAE. Water extracts had high yield regardless of the technique used for leaves and stems, and these extracts showed high TAC of 534.72 ± 3.83 mg AAE/g FM for leaves and 215.70 ± 8.87 mg AAE/g FM (mg of ascorbic acid equivalent per g of FM) for stems, and IC50 of 2077.491 μg/mL for leaves and 1248.185 μg/mL for stems. We explain the latter by the high total phenolic contents (TPCs), which reach 579.375 ± 3.662 mg GAE/g FM (mg of gallic acid equivalents per g of fresh matter) for leaves and 264.906 ± 3.500 mg GAE/g FM for stems. These results confirmed that the leaves and stems of the studied cardoon waste were, indeed, interesting sources of natural antioxidants.
Open AccessSuccessive Solvent Extraction, Characterization and Antioxidant Activities of Cardoon Waste (Leaves and Stems) Extracts: Comparative Study
The main interest in the valorization of vegetable wastes is due to the peculiarity of their chemical composition in substances that present important properties. Among these substances, antioxidants could replace those industrially manufactured. In the present study, three solvents of different polarities (hexane, ethanol, and water) were applied for the extraction of phenolic compounds from Cynara cardunculus L. waste using two extraction methods: Soxhlet Extraction (SE) and Ultrasonic-Assisted Extraction (UAE). The obtained extracts were then characterized by Fourier-Transform Infrared (FTIR) spectroscopy and spectrophotometric determination of Total Phenolics (TPC), Total Flavonoids (TFC), and Condensed Tannins (CT). Total Antioxidant Capacity (TAC) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity of ethanol and water extracts of leaves and stems were also evaluated. High extraction yields were obtained by UAE. Water extracts had high yield regardless of the technique used for leaves and stems, and these extracts showed high TAC of 534.72 ± 3.83 mg AAE/g FM for leaves and 215.70 ± 8.87 mg AAE/g FM (mg of ascorbic acid equivalent per g of FM) for stems, and IC50 of 2077.491 μg/mL for leaves and 1248.185 μg/mL for stems. We explain the latter by the high total phenolic contents (TPCs), which reach 579.375 ± 3.662 mg GAE/g FM (mg of gallic acid equivalents per g of fresh matter) for leaves and 264.906 ± 3.500 mg GAE/g FM for stems. These results confirmed that the leaves and stems of the studied cardoon waste were, indeed, interesting sources of natural antioxidants.
- Open Access
- 29 November 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (53) , 34393-34403
Activated carbon from almond shells using an eco-compatible method: screening, optimization, characterization, and adsorption performance testing
Activated carbon as a low-cost adsorbent prepared from almond shells using H3PO4 as a chemical activator and room vacuum pyrolysis as a physical activator, which is considered to be an eco-compatible preparation process. Experimental design methodology was used to study and optimize the effects of eight preparation parameters on I2 adsorption expressed by the iodine index (mg g−1). It was found that optimum activated carbon was obtained by chemical activation with H3PO4 at first, followed by physical treatment at 420 °C under a vacuum pressure of −0.8 bar. The obtained activated carbon was characterized by a thermogravimetric analyzer, scanning electron microscopy coupled to EDX, X-ray diffraction, and Fourier transform infrared absorption spectroscopy. The zero-charge pH and the characteristics of surface chemistry by Boehm titration were determined to predict the acid–base properties of the prepared material. An adsorption efficiency study of crystal violet dye on the optimally produced activated carbon was carried out. The obtained results of physicochemical characterization showed interesting properties of our activated carbon in comparison with those produced by other methods. Among these properties, an important porous surface, high thermal stability, and a disorganized graphitic crystalline structure were revealed. In addition to the carbon and oxygen elements, EDX analysis revealed the presence of phosphorus element, and the FTIR analysis indicated the existence of phosphonate groups and an acidic character, which resulted from chemical activation by H3PO4. An iodine index of 824.85 mg g−1 was achieved for optimal preparation. Crystal violet adsorption studies show a pseudo-first-order kinetic process and fit well with the Freundlich isotherm model, and thus, the predicted adsorption capacity was 364.27 mg g−1.
- 29 November 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (53) , 34393-34403
Open AccessActivated carbon from almond shells using an eco-compatible method: screening, optimization, characterization, and adsorption performance testing
Activated carbon as a low-cost adsorbent prepared from almond shells using H3PO4 as a chemical activator and room vacuum pyrolysis as a physical activator, which is considered to be an eco-compatible preparation process. Experimental design methodology was used to study and optimize the effects of eight preparation parameters on I2 adsorption expressed by the iodine index (mg g−1). It was found that optimum activated carbon was obtained by chemical activation with H3PO4 at first, followed by physical treatment at 420 °C under a vacuum pressure of −0.8 bar. The obtained activated carbon was characterized by a thermogravimetric analyzer, scanning electron microscopy coupled to EDX, X-ray diffraction, and Fourier transform infrared absorption spectroscopy. The zero-charge pH and the characteristics of surface chemistry by Boehm titration were determined to predict the acid–base properties of the prepared material. An adsorption efficiency study of crystal violet dye on the optimally produced activated carbon was carried out. The obtained results of physicochemical characterization showed interesting properties of our activated carbon in comparison with those produced by other methods. Among these properties, an important porous surface, high thermal stability, and a disorganized graphitic crystalline structure were revealed. In addition to the carbon and oxygen elements, EDX analysis revealed the presence of phosphorus element, and the FTIR analysis indicated the existence of phosphonate groups and an acidic character, which resulted from chemical activation by H3PO4. An iodine index of 824.85 mg g−1 was achieved for optimal preparation. Crystal violet adsorption studies show a pseudo-first-order kinetic process and fit well with the Freundlich isotherm model, and thus, the predicted adsorption capacity was 364.27 mg g−1.
- Open Access
- 31 May 2022
- Published by Springer Nature in Research Square
Physico-chemical proprieties of Almond residues (Shells & hulls) collected from the northern region of Morocco (Fez-Meknes)
In Morocco, the Almond sector is among the most developed agricultural activities since 2008, which has seen its area increases by 13% in less than 4 years. The industrial transformation of this fruit has not ceased to develop, leaving behind 80% of products, which are generally incinerated or dumped in nature. Their valorization becomes a necessity to protect the environment and even to bring an additional value to them. This work aims at characterizing the industrial residues of Almonds from Fez- Meknes region, namely the Almond Hull (AH) and the Almond Shell (AS), by ICP- AES, SEM-EDX, TG-DTG, DRX and FTIR. The structural morphology of AH shows fibrous appearance, while that of AS is characterized by the existence of cavities in the form of holes and pores. A high content of extractives was noted for AH, however AS are rich of lignocellulosic compounds. The crystallinity index of Cellulose I has been studied and a total mass loss of 90% for AH and 95% for AS has been obtained after Thermogravimetric analysis at 800°C.This study has helped to clarify the different physico-chemical properties of this type of waste in order to open the way to appropriate applications.
- 31 May 2022
- Published by Springer Nature in Research Square
Open AccessPhysico-chemical proprieties of Almond residues (Shells & hulls) collected from the northern region of Morocco (Fez-Meknes)
In Morocco, the Almond sector is among the most developed agricultural activities since 2008, which has seen its area increases by 13% in less than 4 years. The industrial transformation of this fruit has not ceased to develop, leaving behind 80% of products, which are generally incinerated or dumped in nature. Their valorization becomes a necessity to protect the environment and even to bring an additional value to them. This work aims at characterizing the industrial residues of Almonds from Fez- Meknes region, namely the Almond Hull (AH) and the Almond Shell (AS), by ICP- AES, SEM-EDX, TG-DTG, DRX and FTIR. The structural morphology of AH shows fibrous appearance, while that of AS is characterized by the existence of cavities in the form of holes and pores. A high content of extractives was noted for AH, however AS are rich of lignocellulosic compounds. The crystallinity index of Cellulose I has been studied and a total mass loss of 90% for AH and 95% for AS has been obtained after Thermogravimetric analysis at 800°C.This study has helped to clarify the different physico-chemical properties of this type of waste in order to open the way to appropriate applications.
- Open Access
- 16 December 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (24) , 13905
Physicochemical Characterization of Cardoon “Cynara cardunculus” Wastes (Leaves and Stems): A Comparative Study
The disposal of vegetable wastes in nature is harmful for marine habitats and biota. These types of waste are frequently used as fuel, generating polluting products, with undesired side effects on the environment. Therefore, it is essential to find better alternatives for the capitalisation of these waste products. Their diversified chemical composition can become a potential resource of high added value raw materials. The knowledge of the physicochemical properties of these wastes is therefore essential. The present work aimed for characterising the physicochemical properties of a plant residue belonging to the Asteraceae Family, collected from a vegetable market in Fez city, Morocco. The vegetal tissues were analysed by Scanning Electron Microscopy coupled with EDX, X-ray Diffraction, Fourier Transform Infrared Spectroscopy, Inductively Coupled Plasma Atomic Emission Spectroscopy, and by Thermogravimetric/Differential thermal analyses. Other additional parameters were also measured, such as moisture, volatile matter, ash, and fixed carbon contents. Acidic and basic surface functions were evaluated by Boehm’s method, and pH points at zero charge were equally calculated. The results revealed a strong congruence between the morphological and structural properties of this plant. These vegetal wastes comprise a homogeneous fibrous and porous aspect both in surface and in profile, with a crystalline structure characteristic of cellulose I. A mass loss of 86.49% for leaves and 87.91% for stems in the temperature range of 100 °C to 700 °C, and pHpzc of 8.39 for leaves and 7.35 for stems were found. This study clarifies the similarities and differences between the chemical composition and morphological structure of these vegetal wastes, paving the way for future value-added applications in appropriate fields.
- 16 December 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (24) , 13905
Open AccessPhysicochemical Characterization of Cardoon “Cynara cardunculus” Wastes (Leaves and Stems): A Comparative Study
The disposal of vegetable wastes in nature is harmful for marine habitats and biota. These types of waste are frequently used as fuel, generating polluting products, with undesired side effects on the environment. Therefore, it is essential to find better alternatives for the capitalisation of these waste products. Their diversified chemical composition can become a potential resource of high added value raw materials. The knowledge of the physicochemical properties of these wastes is therefore essential. The present work aimed for characterising the physicochemical properties of a plant residue belonging to the Asteraceae Family, collected from a vegetable market in Fez city, Morocco. The vegetal tissues were analysed by Scanning Electron Microscopy coupled with EDX, X-ray Diffraction, Fourier Transform Infrared Spectroscopy, Inductively Coupled Plasma Atomic Emission Spectroscopy, and by Thermogravimetric/Differential thermal analyses. Other additional parameters were also measured, such as moisture, volatile matter, ash, and fixed carbon contents. Acidic and basic surface functions were evaluated by Boehm’s method, and pH points at zero charge were equally calculated. The results revealed a strong congruence between the morphological and structural properties of this plant. These vegetal wastes comprise a homogeneous fibrous and porous aspect both in surface and in profile, with a crystalline structure characteristic of cellulose I. A mass loss of 86.49% for leaves and 87.91% for stems in the temperature range of 100 °C to 700 °C, and pHpzc of 8.39 for leaves and 7.35 for stems were found. This study clarifies the similarities and differences between the chemical composition and morphological structure of these vegetal wastes, paving the way for future value-added applications in appropriate fields.