Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Li Chin Law has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Data-driven decarbonisation strategies for ships, Part 2: Financial projections

    by Li Chin Law, Nikolaos Tsoulakos, Evita Meristoudi, Panos Theodossopoulos, Epaminondas Mastorakos

  • Open Access

    Voyage-based optimisation of biofuel bunkering strategies using real ship data

    by Li Chin Law, Tan Wen Lin, Nikolaos Tsoulakos, Frank Paleokrassas, Panos Theodossopoulos, Epaminondas Mastorakos

  • Open Access

    Data-driven decarbonisation strategies for ships, part 1: Technical feasibility and emissions modelling

    by Li Chin Law, Nikolaos Tsoulakos, Evita Meristoudi, Panos Theodossopoulos, Epaminondas Mastorakos

  • Open Access

    A Two-Layer Stochastic Techno-Economic Framework for Hydrogen-based Maritime Decarbonisation under Market and Policy Uncertainty

    by Li Chin Law, Epaminondas Mastorakos, Osman Gungen, Selim Gungen, John Cooper

    Maritime decarbonisation pathways are subject to substantial uncertainty arising from volatile fuel markets and evolving regulatory frameworks. This study develops a two-layer stochastic techno-economic framework to evaluate the lifecycle cost competitiveness of hydrogen-based propulsion systems under combined market and policy uncertainty. The framework integrates Monte Carlo-based stochastic price uncertainty (Layer 1) with scenario-conditioned policy uncertainty (Layer 2), capturing variability in key cost drivers including CAPEX, fuel price, CO2 value, EU ETS, FuelEU Maritime, and IMO GFI mechanisms. Two hydrogen pathways, namely onboard hydrogen production using steam methane reforming with carbon capture (HPU) and green hydrogen bunkering (Green H2), are assessed against a conventional oil-fuelled reference ship (RefShip) over the 2030–2050 period. Results show that HPU exhibits strong policy sensitivity and becomes increasingly competitive under supportive policy conditions, whereas Green H2 competitiveness remains constrained by hydrogen fuel cost. The median net lifecycle cost ratio relative to RefShip, R, is in the range 0.24–0.68 for the hydrogen pathways. Excluding FuelEU Maritime and IMO GFI surplus-credit revenues increases the median gross cost ratio to R = 0.65–0.90 for HPU and approximately R = ~0.8 for Green H2. While HPU retains only a small probability of exceeding RefShip costs under Conservative and Moderate policy scenarios, this probability becomes negligible under Optimistic and Policy-Optimal scenarios. Green H2, however, maintains probability of being more expensive than RefShip across all policy scenarios due to the dominant contribution of hydrogen fuel expenditure. Threshold analysis demonstrates that both pathways remain economically favourable relative to RefShip at EUA prices above ~100 €/tCO2, hydrogen price below ~$5.8/kg H2, and CO2 offloading costs below ~$300/tCO2. The results demonstrate the importance of stochastic assessment for capturing long-term investment risk and policy uncertainty, highlighting the value of the proposed framework for risk-informed maritime decarbonisation planning.

  • Open Access

    Energy Efficiency Technologies for Waterborne Transport: A Systematic Review and Taxonomy Pathway

    by Johans Jacobo Jara, Mehdi Zadeh, Li Chin Law, Dong Trong Nguyen

    Maritime transport faces increasing pressure to reduce energy demand and greenhouse gasemissions within an evolving and multilevel regulatory environment. Although energy efficiencyis widely recognized as a cost-effective pillar of decarbonization consistent with the SDG7 andnet-zero objectives, existing governance frameworks remain fragmented and policy instrumentsare often oriented toward fuel substitution rather than demand reduction. Consequently, shipenergy efficiency technologies (EETs), despite extensive technical studies, remain not suffi-ciently integrated into strategic energy planning and regulatory design. To address this gap,the study combines a PRISMA compliant systematic review, complemented by Delphi expertconsultation and stakeholder validation, to develop a structured taxonomy of 68 EETs groupedinto seven clusters or categories. The taxonomy is applied to Inland Waterway Transport,Short Sea Shipping, and Oceangoing fleets, enabling systematic comparison between retrofitand newbuilding configurations. It is explicitly aligned with major regulatory instruments,including the European Green Deal, Fit for 55, the EU ETS, FuelEU Maritime, and relevantIMO mechanisms (EEDI, EEXI, and CII). Beyond classification, the paper applies the taxonomywithin a modelling oriented framework based on 32 key performance indicators and a sizedependent policy indicator that defines a feasible performance corridor rather than a singlebenchmark. This approach enables comparative assessment across vessel classes and lifecyclestages while preserving operational heterogeneity and supporting performance based regulation.The results indicate that coordinated deployment of operational optimization, hydrodynamicimprovements, and energy management measures can deliver substantial reductions in energydemand and emissions. The proposed framework provides a transparent and scalable basis forstrategic maritime energy planning, policy calibration, and investment prioritization.

  • Open Access

    A Thermodynamics Model for the Assessment and Optimisation of Onboard Natural Gas Reforming and Carbon Capture

    by Li Chin Law, Epaminondas Mastorakos, Mohd. Roslee Othman, Antonis Trakakis

    The paper examines pre-combustion carbon capture technology (PreCCS) for liquefied natural gas (LNG) propelled shipping from thermodynamics and energy efficiency perspectives. Various types of LNG reformers and CCS units are considered. The steam methane reformer (SMR) was found to be 20% more energy efficient than autothermal (ATR) and methane pyrolysis (MPR) reactors. Pressure swing adsorption (PSA) had a lower energy requirement than membrane separation (MEM), cryogenic separation (CS), and amine absorption (AA) in pre-combustion carbon capture, with PSA needing 0.18 kWh/kg CO2. An integrated system combining SMR and PSA was proposed using waste heat recovery (WHR) from the engine, assuming similar efficiency for LNG and H2 operation, and cooling and liquefying of the CO2 by the LNG. The SMR-PSA system without WHR had an overall efficiency of 33.4% (defined as work at the propeller divided by the total LNG energy consumption). This was improved to 41.7% with WHR and gave a 65% CO2 emission reduction. For a higher CO2 reduction, CCS from the SMR heater could additionally be employed, giving a maximum CO2 removal rate of 86.2% with 39% overall energy efficiency. By comparison, an amine-based post-engine CCS system without reforming could reach similar CO2 removal rates but with 36.6% overall efficiency. The advantages and disadvantages and technology readiness level of PreCCS for onboard operation are discussed. This study offers evidence that pre-combustion CCS can be a serious contender for maritime propulsion decarbonization. Graphical


  • Open Access

    Numerical analyses on performance of low carbon containership

    by Li Chin Law, Mohd Roslee Othman, Epaminondas Mastorakos


  • Open Access

    Estimates of the Decarbonization Potential of Alternative Fuels for Shipping as a Function of Vessel Type, Cargo, and Voyage

    by Li Chin Law, Epaminondas Mastorakos, Stephen Evans

    Fuel transition can decarbonize shipping and help meet IMO 2050 goals. In this paper, HFO with CCS, LNG with CCS, bio-methanol, biodiesel, hydrogen, ammonia, and electricity were studied using empirical ship design models from a fleet-level perspective and at the Tank-To-Wake level, to assist operators, technology developers, and policy makers. The cargo attainment rate CAR (i.e., cargo that must be displaced due to the low-C propulsion system), the ES (i.e., TTW energy needed per ton*n.m.), the CS (economic cost per ton*n.m.), and the carbon intensity index CII (gCO2 per ton*n.m.) were calculated so that the potential of the various alternatives can be compared quantitatively as a function of different criteria. The sensitivity of CAR towards ship type, fuel type, cargo type, and voyage distance were investigated. All ship types had similar CAR estimates, which implies that considerations concerning fuel transition apply equally to all ships (cargo, containership, tankers). Cargo type was the most sensitive factor that made a ship either weight or volume critical, indirectly impacting on the CAR of different fuels; for example, a hydrogen ship is weight-critical and has 2.3% higher CAR than the reference HFO ship at 20,000 nm. Voyage distance and fuel type could result in up to 48.51% and 11.75% of CAR reduction. In addition to CAR, the ES, CS, and CII for a typical mission were calculated and it was found that HFO and LNG with CCS gave about 20% higher ES and CS than HFO, and biodiesel had twice the cost, while ammonia, methanol, and hydrogen had 3–4 times the CS of HFO and electricity about 20 times, suggesting that decarbonisation of the world’s fleet will come at a large cost. As an example of including all factors in an effort to create a normalized scoring system, an equal weight was allocated to each index (CAR, ES, CS, and CII). Biodiesel achieved the highest score (80%) and was identified as the alternative with the highest potential for a deep-seagoing containership, followed by ammonia, hydrogen, bio-methanol, and CCS. Electricity has the lowest normalized score of 33%. A total of 100% CAR is achievable by all alternative fuels, but with compromises in voyage distance or with refuelling. For example, a battery containership carrying an equal amount of cargo as an HFO-fuelled containership can only complete 13% of the voyage distance or needs refuelling seven times to complete 10,000 n.m. The results can guide decarbonization strategies at the fleet level and can help optimise emissions as a function of specific missions.


  • Open Access

    A Comparison of Alternative Fuels for Shipping in Terms of Lifecycle Energy and Cost

    by Li Chin Law, Beatrice Foscoli, Epaminondas Mastorakos, Stephen Evans

    Decarbonization of the shipping sector is inevitable and can be made by transitioning into low- or zero-carbon marine fuels. This paper reviews 22 potential pathways, including conventional Heavy Fuel Oil (HFO) marine fuel as a reference case, “blue” alternative fuel produced from natural gas, and “green” fuels produced from biomass and solar energy. Carbon capture technology (CCS) is installed for fossil fuels (HFO and liquefied natural gas (LNG)). The pathways are compared in terms of quantifiable parameters including (i) fuel mass, (ii) fuel volume, (iii) life cycle (Well-To-Wake—WTW) energy intensity, (iv) WTW cost, (v) WTW greenhouse gas (GHG) emission, and (vi) non-GHG emissions, estimated from the literature and ASPEN HYSYS modelling. From an energy perspective, renewable electricity with battery technology is the most efficient route, albeit still impractical for long-distance shipping due to the low energy density of today’s batteries. The next best is fossil fuels with CCS (assuming 90% removal efficiency), which also happens to be the lowest cost solution, although the long-term storage and utilization of CO2 are still unresolved. Biofuels offer a good compromise in terms of cost, availability, and technology readiness level (TRL); however, the non-GHG emissions are not eliminated. Hydrogen and ammonia are among the worst in terms of overall energy and cost needed and may also need NOx clean-up measures. Methanol from LNG needs CCS for decarbonization, while methanol from biomass does not, and also seems to be a good candidate in terms of energy, financial cost, and TRL. The present analysis consistently compares the various options and is useful for stakeholders involved in shipping decarbonization.