Fangwen Bao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fangwen Bao has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Ying Li
Department of Ocean Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, China
4 shared publications - Shuyun Yuan
School of Environment, Harbin Institute of Technology, Harbin 150059, China
2 shared publications - Faisal Mumtaz
USPCAS-E, National University of Sciences and Technology (NUST), Islamabad, Pakistan
1 shared publication Haoxiang Xu
Department of Ocean Sciences and Engineering, Southern University of Science and Technology, Shenzhen, China
1 shared publicationHaoyang Yin
Department of Ocean Sciences and Engineering, Southern University of Science and Technology, Shenzhen, China
1 shared publicationJiajun Xu
Department of Ocean Sciences and Engineering, Southern University of Science and Technology, Shenzhen, China
1 shared publication
Latest Publications
- Open Access
- 28 February 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (5) , 837
Emission-Based Machine Learning Approach for Large-Scale Estimates of Black Carbon in China
Tremendous efforts have been made to construct large-scale estimates of aerosol components. However, Black Carbon (BC) estimates over large spatiotemporal scales are still limited. We proposed a novel approach utilizing machine-learning techniques to estimate BC on a large scale. We leveraged a comprehensive gridded BC emission database and auxiliary variables as inputs to train various machine learning (ML) models, specifically a Random Forest (RF) algorithm, to estimate high spatiotemporal BC concentration over China. Different ML algorithms have been applied to a large number of potential datasets and detailed variable importance and sensitivity analysis have also been carried out to explore the physical relevance of variables on the BC estimation model. RF algorithm showed the best performance compared with other ML models. Good predictive performance was observed for the training cases (R2 = 0.78, RMSE = 1.37 μgm−3) and test case databases (R2 = 0.77, RMSE = 1.35 μgm−3) on a daily time scale, illustrating a significant improvement compared to previous studies with remote sensing and chemical transport models. The seasonal variation of BC distributions was also evaluated, with the best performance observed in spring and summer (R2 ≈ 0.7–0.76, RMSE ≈ 0.98–1.26 μgm−3), followed by autumn and winter (R2 ≈ 0.7–0.72, RMSE ≈ 1.37–1.63 μgm−3). Variable importance and sensitivity analysis illustrated that the BC emission inventories and meteorology showed the highest importance in estimating BC concentration (R2 = 0.73, RMSE = 1.88 μgm−3). At the same time, albedo data and some land cover type variables were also helpful in improving the model performance. We demonstrated that the emission-based ML model with an appropriate auxiliary database (e.g., satellite and reanalysis datasets) could effectively estimate the spatiotemporal BC concentrations at a large scale. In addition, the promising results obtained through this approach highlight its potential to be utilized for the assessment of other primary pollutants in the future.
- 28 February 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (5) , 837
Open AccessEmission-Based Machine Learning Approach for Large-Scale Estimates of Black Carbon in China
Tremendous efforts have been made to construct large-scale estimates of aerosol components. However, Black Carbon (BC) estimates over large spatiotemporal scales are still limited. We proposed a novel approach utilizing machine-learning techniques to estimate BC on a large scale. We leveraged a comprehensive gridded BC emission database and auxiliary variables as inputs to train various machine learning (ML) models, specifically a Random Forest (RF) algorithm, to estimate high spatiotemporal BC concentration over China. Different ML algorithms have been applied to a large number of potential datasets and detailed variable importance and sensitivity analysis have also been carried out to explore the physical relevance of variables on the BC estimation model. RF algorithm showed the best performance compared with other ML models. Good predictive performance was observed for the training cases (R2 = 0.78, RMSE = 1.37 μgm−3) and test case databases (R2 = 0.77, RMSE = 1.35 μgm−3) on a daily time scale, illustrating a significant improvement compared to previous studies with remote sensing and chemical transport models. The seasonal variation of BC distributions was also evaluated, with the best performance observed in spring and summer (R2 ≈ 0.7–0.76, RMSE ≈ 0.98–1.26 μgm−3), followed by autumn and winter (R2 ≈ 0.7–0.72, RMSE ≈ 1.37–1.63 μgm−3). Variable importance and sensitivity analysis illustrated that the BC emission inventories and meteorology showed the highest importance in estimating BC concentration (R2 = 0.73, RMSE = 1.88 μgm−3). At the same time, albedo data and some land cover type variables were also helpful in improving the model performance. We demonstrated that the emission-based ML model with an appropriate auxiliary database (e.g., satellite and reanalysis datasets) could effectively estimate the spatiotemporal BC concentrations at a large scale. In addition, the promising results obtained through this approach highlight its potential to be utilized for the assessment of other primary pollutants in the future.
- Top Cited Papers
- 27 October 2022
- Published by Elsevier in Science of The Total Environment
- Vol. 858 (Pt 1) , 159741
Marine environmental monitoring with unmanned vehicle platforms: Present applications and future prospects
- 27 October 2022
- Published by Elsevier in Science of The Total Environment
- Vol. 858 (Pt 1) , 159741
Top Cited PapersMarine environmental monitoring with unmanned vehicle platforms: Present applications and future prospects
- Open Access
- 13 May 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (10) , 2360
A New Coupling Method for PM2.5 Concentration Estimation by the Satellite-Based Semiempirical Model and Numerical Model
Aerosol optical and chemical properties play a major role in the retrieval of PM2.5 concentrations based on aerosol optical depth (AOD) data from satellites in the conventional semiempirical model (SEM). However, limited observation information hinders the high-resolution estimation of PM2.5. Therefore, a new method for evaluating near-surface PM2.5 at high spatial resolution is developed by coupling the SEM and the chemical transport model (CTM)-based numerical (CSEN) model. The numerical model can provide large-scale information for aerosol properties with high spatial resolution at a large scale based on emissions and meteorology, though it can still be biased in simulating absolute PM2.5 concentrations. Therefore, the two crucial aerosol characteristic parameters, including the coefficient integrated humidity effect (γ′) and the comprehensive reference value of aerosol properties (K) in SEM, have been redefined using the WRF-Chem numerical model. Improved model performance was observed for these results compared with the original SEM results. The monthly averaged correlation coefficients (R) by CSEN were 0.92, 0.82, 0.84, and 0.83 in January, April, July, and October, respectively, whereas those of the SEM were 0.80, 0.77, 0.72, and 0.72, respectively. All the statistical metrics of the model validation showed significant improvements in all seasons. The reduced biases of estimated PM2.5 by CSEN indicated the effect of hygroscopic growth and aerosol properties affected by the meteorology on the relationship between AOD and estimated PM2.5 concentrations, especially in winter and summer. The better performance of the CSEN model provides insight for air quality monitoring at different scales, which supplies important information for air pollution control policies and health impact analysis.
- 13 May 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (10) , 2360
Open AccessA New Coupling Method for PM2.5 Concentration Estimation by the Satellite-Based Semiempirical Model and Numerical Model
Aerosol optical and chemical properties play a major role in the retrieval of PM2.5 concentrations based on aerosol optical depth (AOD) data from satellites in the conventional semiempirical model (SEM). However, limited observation information hinders the high-resolution estimation of PM2.5. Therefore, a new method for evaluating near-surface PM2.5 at high spatial resolution is developed by coupling the SEM and the chemical transport model (CTM)-based numerical (CSEN) model. The numerical model can provide large-scale information for aerosol properties with high spatial resolution at a large scale based on emissions and meteorology, though it can still be biased in simulating absolute PM2.5 concentrations. Therefore, the two crucial aerosol characteristic parameters, including the coefficient integrated humidity effect (γ′) and the comprehensive reference value of aerosol properties (K) in SEM, have been redefined using the WRF-Chem numerical model. Improved model performance was observed for these results compared with the original SEM results. The monthly averaged correlation coefficients (R) by CSEN were 0.92, 0.82, 0.84, and 0.83 in January, April, July, and October, respectively, whereas those of the SEM were 0.80, 0.77, 0.72, and 0.72, respectively. All the statistical metrics of the model validation showed significant improvements in all seasons. The reduced biases of estimated PM2.5 by CSEN indicated the effect of hygroscopic growth and aerosol properties affected by the meteorology on the relationship between AOD and estimated PM2.5 concentrations, especially in winter and summer. The better performance of the CSEN model provides insight for air quality monitoring at different scales, which supplies important information for air pollution control policies and health impact analysis.
- Open Access
- 26 April 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (9) , 2080
Severe Biomass-Burning Aerosol Pollution during the 2019 Amazon Wildfire and Its Direct Radiative-Forcing Impact: A Space Perspective from MODIS Retrievals
An extreme biomass burning event occurred in the Amazonian rainforest from July through September 2019 due to the extensive wildfires used to clear the land, which allowed for more significant forest burning than previously occurred. In this study, we reclustered the clear-sky ambient aerosols to adapt the black carbon (BC) aerosol retrieval algorithm to Amazonia. This not only isolated the volumetric fraction of BC (fbc) from moderate-resolution imaging spectroradiometer (MODIS) aerosol data, but also facilitated the use of aerosol mixing and scattering models to estimate the absorption properties of smoke plumes. The retrieved MODIS aerosol dataset provided a space perspective on characterizing the aerosol changes and trends of the 2019 pollution event. A very high aerosol optical depth (AOD) was found to affect the source areas continuously, with higher and thus stronger aerosol absorption. These pollutants also affected the atmosphere downwind due to the transport of air masses. In addition, properties of aerosols emitted from the 2019 Amazonian wildfire events visualized a significant year-to-year enhancement, with the averaged AOD at 550 nm increased by 150%. A 200% increase in the aerosol-absorption optical depth (AAOD) at 550 nm was recognized due to the low single-scattering albedo (SSA) caused by the explosive BC emissions during the pollution peak. Further simulations of aerosol radiative forcing (ARF) showed that the biomass-burning aerosols emitted during the extreme Amazonian wildfires event in 2019 forced a significant change in the radiative balance, which not only produced greater heating of the atmospheric column through strong absorption of BC, but also reduced the radiation reaching the top-of-atmosphere (TOA) and surface level. The negative radiative forcing at the TOA and surface level, as well as the positive radiative forcing in the atmosphere, were elevated by ~30% across the whole of South America compared to 2018. These radiative effects of the absorbing aerosol could have the ability to accelerate the deterioration cycle of drought and fire over the Amazonian rainforest.
- 26 April 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (9) , 2080
Open AccessSevere Biomass-Burning Aerosol Pollution during the 2019 Amazon Wildfire and Its Direct Radiative-Forcing Impact: A Space Perspective from MODIS Retrievals
An extreme biomass burning event occurred in the Amazonian rainforest from July through September 2019 due to the extensive wildfires used to clear the land, which allowed for more significant forest burning than previously occurred. In this study, we reclustered the clear-sky ambient aerosols to adapt the black carbon (BC) aerosol retrieval algorithm to Amazonia. This not only isolated the volumetric fraction of BC (fbc) from moderate-resolution imaging spectroradiometer (MODIS) aerosol data, but also facilitated the use of aerosol mixing and scattering models to estimate the absorption properties of smoke plumes. The retrieved MODIS aerosol dataset provided a space perspective on characterizing the aerosol changes and trends of the 2019 pollution event. A very high aerosol optical depth (AOD) was found to affect the source areas continuously, with higher and thus stronger aerosol absorption. These pollutants also affected the atmosphere downwind due to the transport of air masses. In addition, properties of aerosols emitted from the 2019 Amazonian wildfire events visualized a significant year-to-year enhancement, with the averaged AOD at 550 nm increased by 150%. A 200% increase in the aerosol-absorption optical depth (AAOD) at 550 nm was recognized due to the low single-scattering albedo (SSA) caused by the explosive BC emissions during the pollution peak. Further simulations of aerosol radiative forcing (ARF) showed that the biomass-burning aerosols emitted during the extreme Amazonian wildfires event in 2019 forced a significant change in the radiative balance, which not only produced greater heating of the atmospheric column through strong absorption of BC, but also reduced the radiation reaching the top-of-atmosphere (TOA) and surface level. The negative radiative forcing at the TOA and surface level, as well as the positive radiative forcing in the atmosphere, were elevated by ~30% across the whole of South America compared to 2018. These radiative effects of the absorbing aerosol could have the ability to accelerate the deterioration cycle of drought and fire over the Amazonian rainforest.
- Open Access
- 18 December 2021
- Published by MDPI AG in Atmosphere
- Vol. 12 (12) , 1700
A Satellite Data Based Detailed Study of the Aerosol Emitted from Open Biomass Burning in Northeast China
Due to its unique natural conditions and agricultural tradition, northeast China (NEC) has formed a distinctive open biomass burning habit with local-specific biomass burning aerosol features. In this research, with the help of a newly optimized biomass burning aerosol identification method, which combines satellite aerosol and fire observational products with the HYSPLIT model forward trajectories, a systematic and quantitative analysis of aerosol emitted from open biomass burning in the NEC region are conducted to determine in detail its local-specific features, such as influence region, aging characteristics, and seasonal variation. During the 72-h aging process after biomass burning emission, aerosol particle size growth found with the Angstrom exponent declines from 1.6 to 1.54. Additionally, the volume fraction of black carbon decreases from 4.5% to 3.1%, leading to the Single Scattering Albedo (SSA) increasing from the fresh state of 0.84 to the aged state of 0.89. The cooling effect at TOA, due to the existence of aerosol, is enhanced by more than 70%, indicating its severe and dynamic influence on climate change. The average AOD in spring is 0.63, which is higher than autumn’s value of 0.52, indicating that biomass burning is more intensive in spring. Compared to autumn, aerosols emitted from spring biomass burning in the NEC region have lower sphere fraction, smaller particle size, higher volume fraction of black carbon, higher absorbability, and weaker cooling effect at TOA, which can be partly explained by the drier ambient environment and lower water content of the burned crop straw in spring.
- 18 December 2021
- Published by MDPI AG in Atmosphere
- Vol. 12 (12) , 1700
Open AccessA Satellite Data Based Detailed Study of the Aerosol Emitted from Open Biomass Burning in Northeast China
Due to its unique natural conditions and agricultural tradition, northeast China (NEC) has formed a distinctive open biomass burning habit with local-specific biomass burning aerosol features. In this research, with the help of a newly optimized biomass burning aerosol identification method, which combines satellite aerosol and fire observational products with the HYSPLIT model forward trajectories, a systematic and quantitative analysis of aerosol emitted from open biomass burning in the NEC region are conducted to determine in detail its local-specific features, such as influence region, aging characteristics, and seasonal variation. During the 72-h aging process after biomass burning emission, aerosol particle size growth found with the Angstrom exponent declines from 1.6 to 1.54. Additionally, the volume fraction of black carbon decreases from 4.5% to 3.1%, leading to the Single Scattering Albedo (SSA) increasing from the fresh state of 0.84 to the aged state of 0.89. The cooling effect at TOA, due to the existence of aerosol, is enhanced by more than 70%, indicating its severe and dynamic influence on climate change. The average AOD in spring is 0.63, which is higher than autumn’s value of 0.52, indicating that biomass burning is more intensive in spring. Compared to autumn, aerosols emitted from spring biomass burning in the NEC region have lower sphere fraction, smaller particle size, higher volume fraction of black carbon, higher absorbability, and weaker cooling effect at TOA, which can be partly explained by the drier ambient environment and lower water content of the burned crop straw in spring.