MYMengqiu Yan

Mengqiu Yan

*This is an algorithmically generated author record based on publicly available information.

Mengqiu Yan has a total of 9 co-authors. Here are the top co-authors by number of shared publications:

  • Dehuan Yang

    Ph.D. Candidate, College of Civil Engineering and Architecture, Guilin Univ. of Technology, Guangxi Key Laboratory of Geomechanics and Geotechnical Engineering, Guilin, Guangxi 541004, P.R. China

    1 shared publication
  • Haihao Yu

    Lecturer, College of Civil Engineering and Architecture, Guilin Univ. of Technology, Guangxi Key Laboratory of Geomechanics and Geotechnical Engineering, Guilin, Guangxi 541004, P.R. China

    1 shared publication
  • Haihao Yu

    College of Civil Engineering and Architecture

    1 shared publication
  • Jia-Nan Zheng

    Shanghai Institute for Advanced Study

    1 shared publication
  • Kang Ma

    Shanghai Institute for Advanced Study

    1 shared publication
  • Rongtao Yan

    Professor, College of Civil Engineering and Architecture, Guilin Univ. of Technology, Guangxi Key Laboratory of Geomechanics and Geotechnical Engineering, Guilin, Guangxi 541004, P.R. China

    1 shared publication

Latest Publications

  • Influence of Temperature and Pore Pressure on Geomechanical Behavior of Methane Hydrate-Bearing Sand

    by Rongtao Yan, Mengqiu Yan, Haihao Yu, Dehuan Yang

    Geomechanical behavior of methane hydrate-bearing sediment (MHBS) plays a major role in evaluation of the stability of a hydrate reservoir. A series of triaxial compression tests were conducted on MHBS to study the influence of temperature and pore pressure conditions on its mechanical behaviors. The experimental results show that temperature and pore pressure have a significant effect on the stress–strain curve, stiffness, and strength of MHBS. As temperature decreases and/or pore pressure increases, the stress–strain curve manifests an enhanced strain-softening characteristic, stiffness, and strength. Furthermore, MHBS cohesion also tends to exhibit a significant increase, but its internal friction angle almost remains constant with decreasing temperature and/or increasing pore pressure. These findings imply that the change in temperature and pore pressure affects the strength of MHBS, which occurs predominately due to change in its cohesiveness. To describe these impacts, a phase state parameter is introduced to characterize the temperature and pore pressure conditions. Meanwhile, three empirical formulas for relating the secant modulus, strength and cohesiveness to phase state parameter are presented. Good agreement between simulation and measured data indicates that the phase state parameter can effectively describe temperature and pore pressure conditions. The proposed empirical formulas are able to address the influences of temperature and pore pressure conditions on geomechanical characteristics of MHBS.


  • Open Access

    Strain‐Softening Characteristics of Hydrate‐Bearing Sediments and Modified Duncan–Chang Model

    by Mengqiu Yan, Rongtao Yan, Haihao Yu

    Marine hydrate exploitation may trigger the seabed geological disaster, such as seafloor collapse and landslide. It is critically important to understand the mechanical properties of hydrate‐bearing sediment. Strain‐softening observation is a typical behavior of hydrate‐bearing sediment (HBS) and exhibits more significant at higher hydrate saturation. This paper performed a series of triaxial compression tests on methane hydrate‐bearing sand to analyze the influence rule and mechanism of hydrate saturation on the strain‐softening characteristic, stiffness, and strength and introduced the strain‐softening index to quantificationally characterize the strain‐softening behaviors of HBS with different hydrate saturations. Based on the analyses on the mechanical behavior of HBS, the Duncan–Chang model is extended to address the stress‐strain curves of HBS. Two empirical formulas with hydrate saturation embedded are used to characterize the enhanced initial modulus and strength for HBS, respectively. To address the strain‐softening behavior of HBS, the modified Duncan–Chang model introduced a damage factor into the strength of HBS. To validate the modified Duncan–Chang model, four different triaxial compression tests are simulated. The good consistence between simulated result and experimental data demonstrates that the modified Duncan–Chang model is capable of reflecting the influence of hydrate saturation not only on the stiffness and strength but also on the strain‐softening characteristics of HBS.