Darwin Jimenez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Darwin Jimenez has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Edgar Cando
Departamento de Ingeniería Mecánica, Escuela Politécnica Nacional, Quito 170517, Ecuador
2 shared publications - Esteban Valencia
Escuela Politécnica Nacional, Quito, Ecuador
2 shared publications - Ariel Herrera
Aeronautics and Applied Thermofluids Research Group, Department of Mechanical Engineering, Escuela Politécnica Nacional, Quito 170517, Ecuador
1 shared publication - Christian Mora
Centro de Investigación y Recuperación de Turbinas Hidráulicas y Partes Industriales, CELEC EP, Baños de Agua Santa 180254, Ecuador
1 shared publication - Cristian Cruzatty
Departamento de Ingeniería Mecánica, Escuela Politécnica Nacional, Quito 170517, Ecuador
1 shared publication - Iván Zambrano
Departamento de Ingeniería Mecánica, Escuela Politécnica Nacional, Quito 170517, Ecuador
1 shared publication
Latest Publications
- Open Access
Evaluation of Series and Parallel Hybrid Propulsion Systems for UAVs Implementing Distributed Propulsion Architectures
Current environmental policies for the aviation sector motivate the use of cleaner propulsion alternatives in order to reduce their CO2 footprint and noise pollution in the coming years. In this context, hybrid propulsion systems have emerged as a potential solution, as they have demonstrated a good trade-off between performance and low pollutant emissions. The present work carries out a comparison between parallel and series hybrid propulsion systems using heterogeneous and homogeneous distributed propulsion architectures. In order to highlight the opportunities of distributed propulsion systems and validate the methodology developed, a single propulsion hybrid configuration is used as baseline case for this study. For the propulsion system sizing, this work uses a parametric modelling tool, which includes a constraint analysis coupled with a weight estimation module to determine suitable configurations for a environmental monitoring mission. The latter module includes semi-empirical correlations to size the electric and mechanical components for each propulsion setup. From the results, it has been found that for the representative case of monitoring in the Galapagos Islands, which requires an endurance of approximate 7 h, the parallel hybrid system using three distributed propulsors presents the best performance features in terms of fuel savings, showing a 34% reduction compared with the baseline case. To summarize, the main contribution of this study lies on the development of a methodology to set potential hybrid distributed propulsion configurations for UAVs aimed for determined monitoring missions.
Open AccessEvaluation of Series and Parallel Hybrid Propulsion Systems for UAVs Implementing Distributed Propulsion Architectures
Current environmental policies for the aviation sector motivate the use of cleaner propulsion alternatives in order to reduce their CO2 footprint and noise pollution in the coming years. In this context, hybrid propulsion systems have emerged as a potential solution, as they have demonstrated a good trade-off between performance and low pollutant emissions. The present work carries out a comparison between parallel and series hybrid propulsion systems using heterogeneous and homogeneous distributed propulsion architectures. In order to highlight the opportunities of distributed propulsion systems and validate the methodology developed, a single propulsion hybrid configuration is used as baseline case for this study. For the propulsion system sizing, this work uses a parametric modelling tool, which includes a constraint analysis coupled with a weight estimation module to determine suitable configurations for a environmental monitoring mission. The latter module includes semi-empirical correlations to size the electric and mechanical components for each propulsion setup. From the results, it has been found that for the representative case of monitoring in the Galapagos Islands, which requires an endurance of approximate 7 h, the parallel hybrid system using three distributed propulsors presents the best performance features in terms of fuel savings, showing a 34% reduction compared with the baseline case. To summarize, the main contribution of this study lies on the development of a methodology to set potential hybrid distributed propulsion configurations for UAVs aimed for determined monitoring missions.
- Open Access
A Case Study: Sediment Erosion in Francis Turbines Operated at the San Francisco Hydropower Plant in Ecuador
The operation of various types of turbomachines is importantly affected by sediment erosion. Francis turbines used for power generation typically suffer said effects due to the fact that they are used in sediment-laden rivers and are usually operated disregarding the long-term effect of the erosion on turbine performance. This investigation seeks to study the erosion rate for the main components of the turbines located at San Francisco hydropower plant in Pastaza, Ecuador. A sediment characterization study was performed in order to determine the properties of the particles present in Pastaza River and accurately predict their effect on the turbine flow passages. A numerical approach combining liquid–solid two-phase flow simulation and an erosion model was used to analyze the erosion rates at different operating conditions and determine wear patterns in the components. As expected, the results indicated that an increase in the erosion rate was obtained for higher intake flows. However, a dramatic increase in the erosion rate was observed when the turbine was operated at near-full-load conditions, specifically when guide vane opening exceeded a 90% aperture.
Open AccessA Case Study: Sediment Erosion in Francis Turbines Operated at the San Francisco Hydropower Plant in Ecuador
The operation of various types of turbomachines is importantly affected by sediment erosion. Francis turbines used for power generation typically suffer said effects due to the fact that they are used in sediment-laden rivers and are usually operated disregarding the long-term effect of the erosion on turbine performance. This investigation seeks to study the erosion rate for the main components of the turbines located at San Francisco hydropower plant in Pastaza, Ecuador. A sediment characterization study was performed in order to determine the properties of the particles present in Pastaza River and accurately predict their effect on the turbine flow passages. A numerical approach combining liquid–solid two-phase flow simulation and an erosion model was used to analyze the erosion rates at different operating conditions and determine wear patterns in the components. As expected, the results indicated that an increase in the erosion rate was obtained for higher intake flows. However, a dramatic increase in the erosion rate was observed when the turbine was operated at near-full-load conditions, specifically when guide vane opening exceeded a 90% aperture.