Daniela Flavia Olivera has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Diseño de celdas óhmicas para el horneado de masas batidas y estimación de conductividad eléctrica

    by Sandro Goñi, Nicolás Gabriel Mattioli, Daniela Olivera, Viviana Salvadori, Francesco Marra

    This work aimed to design, build and evaluate the performance of ohmic cells for baking batters, as well as determining their electrical conductivity. An ideal model was used to identify key system parameters, analyze the effect of operating conditions and product properties, and decide on the construction of a prototype ohmic cell. The model predicted that baking time depends inversely on the square of the electric field and electrical conductivity. The required electrical current was found to be proportional to the electric field and sample mass, and inversely proportional to electrode gap. An ohmic acrylic cell with a 9 cm gap between the steel electrodes was constructed. A gluten-free baking mixture was used, and an alternating current at 50 Hz was applied, with electric fields ranging from 1500 to 2500 V/m. The experimental results showed good agreement with the theoretical predictions. Another model with temperature-dependent electrical conductivity was used to predict this property using temperature profiles, achieving a relative error of less than 5%. Overall, the simplified model was successful in predicting the general behavior of the system.

  • Ohmic Cells Design for Baking Whipped Dough

    by N. G. Mattioli, V. O. Salvadori, D. F. Olivera, S. M. Goñi

  • Open Access

    Desarrollo de un programa de código abierto para medición de color de alimentos a partir de imágenes

    by Nicolás Gabriel Mattioli, Daniela Flavia Olivera, Viviana Olga Salvadori, Sandro Mauricio Goñi

    En este trabajo se presenta la implementación computacional y evaluación de un programa simple de código abierto para realizar la medición de color de alimentos sólidos en el espacio L*a*b*, a partir de imágenes digitales. El programa se implementó en el software libre OCTAVE, y permite leer una imagen y realizar la conversión del espacio de color RGB a L*a*b*. Se implementó un modelo directo de conversión, el cual no requiere calibración, y un modelo empírico que requiere calibración; con dicho propósito se utilizó un patrón de color conocido. El código del programa puede ser fácilmente modificado para adaptarse a las necesidades de cada usuario. Para la evaluación del programa, se utilizaron 18 muestras de alimentos de un amplio rango de colores, con diferentes iluminaciones, y se compararon con mediciones obtenidas con un colorímetro. La diferencia de color total (DE) promedio entre los valores del colorímetro y por imágenes fue 23.1, mientras que las diferencias promedio de L*, a* y b* fueron 8.6, 14.9 y 13.2, respectivamente. El programa desarrollado es una alternativa fiable cuando no se dispone de otro instrumento de medición de color.


  • Consumer expectation and perception of ready-to-eat hybrid chicken-vegetable patty

    by M. Victoria Aviles, Elisa Fernanda Naef, Rosa Ana Abalos, Liliana H. Lound, Daniela F. Olivera


  • Use of a rice industry by-product as a meat replacer in a hybrid chicken patty: Technological and sensory impact

    by María Victoria Aviles, Elisa Fernanda Naef, Rosa Ana Abalos, Liliana H. Lound, María Beatriz Gómez, Daniela F. Olivera


  • Thermal resistance for Salmonella enterica strains in Sous-vide chicken-and-vegetable patties

    by M. Victoria Aviles, Elisa Fernanda Naef, Rosa Ana Abalos, Mercedes C. Piaggio, Liliana H. Lound, Daniela F. Olivera


  • Open Access

    Effect of Load Spatial Configuration on the Heating of Chicken Meat Assisted by Radio Frequency at 40.68 MHz

    by Sandro M. Goñi, Matteo D’amore, Marta Della Valle, Daniela F. Olivera, Viviana O. Salvadori, Francesco Marra

    Food heating assisted by radio frequencies has been industrially applied to post-harvest treatment of grains, legumes and various kind of nuts, to tempering and thawing of meat and fish products and to post-baking of biscuits. The design of food processes based on the application of radiofrequencies was often based on rules of thumb, so much so that their intensification could lead significant improvements. One of the subjects under consideration is the shape of the food items that may influence their heating assisted by radiofrequency. In this work, a joint experimental and numerical study on the effects of the spatial configuration of a food sample (chicken meat shaped as a parallelepiped) on the heating pattern in a custom RF oven (40.68 MHz, 50 Ohm, 10 cm electrodes gap, 300 W) is presented. Minced chicken breast samples were shaped as cubes (4 × 4 × 4 cm3) to be organized in different loads and spatial configurations (horizontal or vertical arrays of 2 to 16 cubes). The samples were heated at two radiofrequency operative power levels (225 W and 300 W). Heating rate, temperature uniformity and heating efficiency were determined during each run. A digital twin of the experimental system and process was developed by building and numerically solving a 3D transient mathematical model, taking into account electromagnetic field distribution in air and samples and heat transfer in the food samples. Once validated, the digital tool was used to analyze the heating behavior of the samples, focusing on the most efficient configurations. Both experiments and simulations showed that, given a fixed gap between the electrodes (10 cm), the vertically oriented samples exhibited a larger heating efficiency with respect to the horizontally oriented ones, pointing out that the gap between the top electrode and the samples plays a major role in the heating efficiency. The efficiency was larger (double or even more; >40% vs. 10–15%) in thicker samples (built with two layers of cubes), closer to the top electrode, independently from nominal power. Nevertheless, temperature uniformity in vertical configurations was poorer (6–7 °C) than in horizontal ones (3 °C).


  • Open Access

    Caracterización microbiológica y fisicoquímica de carne de boga (Leporinus obtusidens) impregnada con jugo de limón

    by Elisa Fernanda Naef, María Victoria Aviles, Daniela Flavia Olivera, Rosa Ana Abalos, Maria Beatriz Gómez, Liliana Haydeé Lound

    La carne de pescado es altamente perecedera y microbiológicamente sensible. Este trabajo tuvo como objetivo caracterizar la carne de boga (Leporinus obtusidens) y evaluar el efecto de impregnación a vacío con jugo de limón en sus características microbiológicas y fisicoquímicas. Se determinó humedad, proteínas, grasa, cenizas, pH y recuento de microorganismos indicadores en boga fresca. Los filetes fueron impregnados a vacío con jugo de limón durante 5, 10 y 15 minutos. Las muestras, fueron envasadas a vacío, almacenadas a 3 °C y se analizó variación de peso, pH, color superficial, índice de blancura (IB), nitrógeno básico volátil total (NBVT), recuentos de bacterias psicrótrofas y proteolíticas. La composición de la boga resultó similar a la informada por otros autores, los parámetros a* y b*, y el contenido de grasa fueron acordes a pescados grasos. Los recuentos de microorganismos indicadores resultaron aceptables, a excepción de las enterobacterias que se encontraron levemente aumentadas. La impregnación generó ganancia de peso, aumento de L* e IB, y disminución de pH y de bacterias psicrótrofas y proteolíticas. El NBVT disminuyó significativamente en la carne de boga impregnada por 15 minutos. Durante el almacenamiento, las muestras tratadas presentaron mayor pérdida de peso, en correspondencia con la ganancia generada por el tratamiento; se tornaron más claras; el NBVT se mantuvo constante y se redujeron las bacterias psicrótrofas y proteolíticas. La impregnación a vacío con jugo de limón resultó una tecnología viable para extender la vida útil de la carne de pescado refrigerada hasta cuatro días después del fileteado.


  • Kinetics of colour and texture changes of beef during storage

    by Daniela F. Olivera, Ruth Bambicha, Gladys Laporte, Fernanda Coll Cárdenas, Nora Mestorino

    The influence of the packaging films, aerobic and vacuum conditions, and refrigeration storage temperature (0, 4 and 10 °C) on colour and texture of raw meat were studied during a 2-week storage period in order to analyze kinetics of colour and texture changes. The rate of redness decrease was most noticeable at the highest storage temperature and aerobic conditions and these changes were well described by the first-order reaction. Texture parameter reflected a progressive softening during storage for both films. Decrease on shear force of raw beef during storage followed a first-order kinetic model. Temperature dependence of colour and texture change was adequately modelled with the Arrhenius equation.