Kamil Fedorowicz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kamil Fedorowicz has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Robert Prosser
The University of Manchester
5 shared publications Robert Prosser
School of Engineering, The University of Manchester, Manchester, UK
3 shared publications- Anupam Sengupta
University of Luxembourg
1 shared publication
Latest Publications
- Open Access
- 28 February 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-10
Electrically-driven modulation of flow patterns in liquid crystal microfludics
The flow of liquid crystals in the presence of electric fields is investigated as a possible means of flow control. The Beris-Edwards model is coupled to a free energy incorporating electric field effects. Simulations are conducted in straight channels and in junctions. Our findings reveal that local flow mediation can be achieved by the application of spatially varying electric fields. In rectangular straight channels, we report a two-stream velocity profile arising in response to the imposed electric field. Furthermore, we observe that the flow rate in each stream scales inversely with the Miesowicz viscosities, leading to the confinement of 70% of the throughput to one half of the channel. Similar flow partitioning is also demonstrated in channel junction geometries, where we show that using external fields provides a novel avenue for flow modulation in microfluidic circuits.
- 28 February 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-10
Open AccessElectrically-driven modulation of flow patterns in liquid crystal microfludics
The flow of liquid crystals in the presence of electric fields is investigated as a possible means of flow control. The Beris-Edwards model is coupled to a free energy incorporating electric field effects. Simulations are conducted in straight channels and in junctions. Our findings reveal that local flow mediation can be achieved by the application of spatially varying electric fields. In rectangular straight channels, we report a two-stream velocity profile arising in response to the imposed electric field. Furthermore, we observe that the flow rate in each stream scales inversely with the Miesowicz viscosities, leading to the confinement of 70% of the throughput to one half of the channel. Similar flow partitioning is also demonstrated in channel junction geometries, where we show that using external fields provides a novel avenue for flow modulation in microfluidic circuits.
- Open Access
- 9 February 2024
- Published by Elsevier in Journal of Non-Newtonian Fluid Mechanics
- Vol. 325
The elastic perfectly plastic constitutive equation for yield stress fluids
- 9 February 2024
- Published by Elsevier in Journal of Non-Newtonian Fluid Mechanics
- Vol. 325
Open AccessThe elastic perfectly plastic constitutive equation for yield stress fluids
- Open Access
- 29 August 2023
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 19 (37) , 7084-7092
Curvature-mediated programming of liquid crystal microflows
We use experiments and numerical simulations to demonstrate that the curvature of microfluidic devices allows for flow programming in liquid crystals.
- 29 August 2023
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 19 (37) , 7084-7092
Open AccessCurvature-mediated programming of liquid crystal microflows
We use experiments and numerical simulations to demonstrate that the curvature of microfluidic devices allows for flow programming in liquid crystals.
- Open Access
- 1 March 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (3) , 035125
On the channel flow of yield stress fluids with an internal microstructure
Thin films consisting of polymer solutions are typically produced through a combination of extrusion and shearing processes, where the anisotropic, non-Newtonian solution is deformed and subjected to thermal treatment. This paper investigates the shearing of polymeric thin films by studying the channel flow rheology of polymer solutions that experience yield stress. The material rheology is described by the transversely isotropic fluid (TIF) model, which contains a yield behavior term related to microstructure distortion. Our results show that this distortional stress is able to resist the pressure gradient, and non-trivial stress distributions can exist in the absence of a flow. This represents a significant improvement over existing viscosity-based yield stress models (e.g., the Heschel–Bulkley model). The unyielded state is achieved as the end result of a transient process, where a pressure gradient produces a short-lived flow that ceases when opposing stresses from microstructure distortion are produced. Predictions of the TIF model are compared with the phenomenological Saramito model. Both models are found to predict yielding when a threshold stress is exceeded. In both cases, the velocity profile is Newtonian near the wall, while plug flows are encountered close to the centerline.
- 1 March 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (3) , 035125
Open AccessOn the channel flow of yield stress fluids with an internal microstructure
Thin films consisting of polymer solutions are typically produced through a combination of extrusion and shearing processes, where the anisotropic, non-Newtonian solution is deformed and subjected to thermal treatment. This paper investigates the shearing of polymeric thin films by studying the channel flow rheology of polymer solutions that experience yield stress. The material rheology is described by the transversely isotropic fluid (TIF) model, which contains a yield behavior term related to microstructure distortion. Our results show that this distortional stress is able to resist the pressure gradient, and non-trivial stress distributions can exist in the absence of a flow. This represents a significant improvement over existing viscosity-based yield stress models (e.g., the Heschel–Bulkley model). The unyielded state is achieved as the end result of a transient process, where a pressure gradient produces a short-lived flow that ceases when opposing stresses from microstructure distortion are produced. Predictions of the TIF model are compared with the phenomenological Saramito model. Both models are found to predict yielding when a threshold stress is exceeded. In both cases, the velocity profile is Newtonian near the wall, while plug flows are encountered close to the centerline.
- Open Access
- 15 February 2023
- Published by Taylor & Francis in Liquid Crystals
- Vol. 50 (5) , 763-786
On the effects of Ericksen and Deborah numbers on the flow in microfluidic capillaries
The use of nematics in microfluidic devices offers methods of flow control that are inaccessible to isotropic fluids. While nematics have been used in channel flows found in lab on chip devices, their flow and microstructure formation still needs to be fully understood in geometries with a cylindrical cross-section. This paper investigates liquid crystal flows through capillaries via 1) the Beris-Edwards (BE) model and 2) the Leslie-Ericksen (LE) model, which emerges as a limiting case (uniaxial, constant order parameter) of the BE model. We show that the microstructure distribution is controlled by the Ericksen ( ) and Deborah ( ) numbers in the Beris-Edwards model. Defects at low Ericksen numbers arise when the elastic energy dominates the thermotropic energy. Defect destruction provides a new shear-thinning mechanism, which cannot be observed in the Leslie-Ericksen theory. GRAPHICAL ABSTRACT- 15 February 2023
- Published by Taylor & Francis in Liquid Crystals
- Vol. 50 (5) , 763-786
Open AccessOn the effects of Ericksen and Deborah numbers on the flow in microfluidic capillaries
The use of nematics in microfluidic devices offers methods of flow control that are inaccessible to isotropic fluids. While nematics have been used in channel flows found in lab on chip devices, their flow and microstructure formation still needs to be fully understood in geometries with a cylindrical cross-section. This paper investigates liquid crystal flows through capillaries via 1) the Beris-Edwards (BE) model and 2) the Leslie-Ericksen (LE) model, which emerges as a limiting case (uniaxial, constant order parameter) of the BE model. We show that the microstructure distribution is controlled by the Ericksen ( ) and Deborah ( ) numbers in the Beris-Edwards model. Defects at low Ericksen numbers arise when the elastic energy dominates the thermotropic energy. Defect destruction provides a new shear-thinning mechanism, which cannot be observed in the Leslie-Ericksen theory. GRAPHICAL ABSTRACT - Open Access
- 13 November 2022
- Published by Elsevier in Journal of Non-Newtonian Fluid Mechanics
- Vol. 310
On the simulation of nematic liquid crystalline flows in a 4:1 planar contraction using the Leslie–Ericksen and Beris–Edwards models
- 13 November 2022
- Published by Elsevier in Journal of Non-Newtonian Fluid Mechanics
- Vol. 310
Open AccessOn the simulation of nematic liquid crystalline flows in a 4:1 planar contraction using the Leslie–Ericksen and Beris–Edwards models
- Open Access
- 1 June 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (6) , 063106
On the flow of liquid crystals through 90° bends
During the processing of nematic soft solids through process flow elements (pipe bends, elbows, etc.), the constitutive behavior makes its presence felt via processing (with rheology driven effects increasing pressure drop) and the final product microstructure. This paper explores the flow and microstructure configurations of nematic liquid crystals in a pressure driven flow through 90° pipe bends with different types of wall anchoring. The governing equations of the Leslie–Ericksen theory are solved numerically in a newly developed OpenFOAM solver. We show that the bend curvature deforms the nematic axis distribution; the distortion can be driven either by elastic or hydrodynamic effects. The interaction between the nematic microstructure and flow field generates non-zero normal stresses (in the radial, azimuthal, and streamwise directions), which produce a secondary flow and increase pressure losses. The strength of the secondary flow depends on the type of wall anchoring and Ericksen number; in configurations with homeotropic anchoring, decreasing the Ericksen number increases the relative strength of the secondary flow (with respect to the mean flow velocity). Conversely, homogeneous (planar) anchoring reduces normal stresses, thus weakening the secondary flow strength. We show that as the fluid enters/leaves the bend, there is a perturbation in the transverse velocity caused by streamwise stress gradients. The perturbation magnitude depends on material properties and can be of different values at the bend exit and entrance. Finally, we show that the spatial development of the nematic field downstream of the bend exit is controlled by both material properties and the Ericksen number.
- 1 June 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (6) , 063106
Open AccessOn the flow of liquid crystals through 90° bends
During the processing of nematic soft solids through process flow elements (pipe bends, elbows, etc.), the constitutive behavior makes its presence felt via processing (with rheology driven effects increasing pressure drop) and the final product microstructure. This paper explores the flow and microstructure configurations of nematic liquid crystals in a pressure driven flow through 90° pipe bends with different types of wall anchoring. The governing equations of the Leslie–Ericksen theory are solved numerically in a newly developed OpenFOAM solver. We show that the bend curvature deforms the nematic axis distribution; the distortion can be driven either by elastic or hydrodynamic effects. The interaction between the nematic microstructure and flow field generates non-zero normal stresses (in the radial, azimuthal, and streamwise directions), which produce a secondary flow and increase pressure losses. The strength of the secondary flow depends on the type of wall anchoring and Ericksen number; in configurations with homeotropic anchoring, decreasing the Ericksen number increases the relative strength of the secondary flow (with respect to the mean flow velocity). Conversely, homogeneous (planar) anchoring reduces normal stresses, thus weakening the secondary flow strength. We show that as the fluid enters/leaves the bend, there is a perturbation in the transverse velocity caused by streamwise stress gradients. The perturbation magnitude depends on material properties and can be of different values at the bend exit and entrance. Finally, we show that the spatial development of the nematic field downstream of the bend exit is controlled by both material properties and the Ericksen number.
- 1 February 2022
- Published by Elsevier in Journal of Non-Newtonian Fluid Mechanics
- Vol. 300
Flow of transversely isotropic fluid in curved pipes
- 1 February 2022
- Published by Elsevier in Journal of Non-Newtonian Fluid Mechanics
- Vol. 300
Flow of transversely isotropic fluid in curved pipes