Chiu-Fan Hsieh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Chiu-Fan Hsieh has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Tehseen Johar
Department of Mechanical and Computer-Aided Engineering, National Formosa University, 64 Wunhua Road, Huwei, Yunlin 63201, Taiwan
2 shared publications Alfonso Fuentes-Aznar
Rochester Institute of Technology
1 shared publicationHao-Yu Cheng
Department of Mechanical and Computer-Aided Engineering National Formosa University Taiwan
1 shared publicationTehseen Johar
Department of Mechanical and Computer-Aided Engineering, National Formosa University, 64 Wunhua Road, Huwei, Yunlin, 63201, Taiwan
1 shared publicationWun-Si Jian
Department of Mechanical and Computer-Aided Engineering, National Formosa University, Taiwan, R.O.C
1 shared publicationYi-Hao Lin
Department of Mechanical and Computer-Aided Engineering, National Formosa University, 64 Wunhua Road, Huwei, Yunlin, 63201, Taiwan
1 shared publication
Latest Publications
- Open Access
Design Challenges in Hydrogen-Fueled Rotary Engine—A Review
The rotary engine (RE) is a potential power plant for unmanned aerial vehicles (UAVs) and automobiles because of its structural and design merits. However, it has some serious drawbacks, such as frequent maintenance requirements and excessive fuel consumption. This review paper presents the current status of hydrogen-fueled rotary engine (HRE) technology and identifies the existing research and development gaps in combustion efficiency and performance of this engine that might benefit transportation sector. Focusing primarily on the research from past ten years, the crucial challenges encountered in hydrogen-powered rotary engines have been reviewed in terms of knock, hydrocarbon (HC) emissions, and seal leakages. The paper identifies the recent advances in design concepts and production approaches used in hydrogen-fueled rotary engines such as geometric models of trochoid profiles, port configurations, fuel utilization systems, and currently available computational fluid dynamics (CFD) tools. This review article is an attempt to collect and organize literature on existing design methods up to date and provide recommendations for further improvements in RE technology.
Open AccessDesign Challenges in Hydrogen-Fueled Rotary Engine—A Review
The rotary engine (RE) is a potential power plant for unmanned aerial vehicles (UAVs) and automobiles because of its structural and design merits. However, it has some serious drawbacks, such as frequent maintenance requirements and excessive fuel consumption. This review paper presents the current status of hydrogen-fueled rotary engine (HRE) technology and identifies the existing research and development gaps in combustion efficiency and performance of this engine that might benefit transportation sector. Focusing primarily on the research from past ten years, the crucial challenges encountered in hydrogen-powered rotary engines have been reviewed in terms of knock, hydrocarbon (HC) emissions, and seal leakages. The paper identifies the recent advances in design concepts and production approaches used in hydrogen-fueled rotary engines such as geometric models of trochoid profiles, port configurations, fuel utilization systems, and currently available computational fluid dynamics (CFD) tools. This review article is an attempt to collect and organize literature on existing design methods up to date and provide recommendations for further improvements in RE technology.
- 8 March 2022
- Published by ASME International in Journal of Fluids Engineering
- Vol. 144 (8)
Flow Characteristics of Gerotor Motors With Pin and Nonpin Designs
The geometric design of a gerotor motor has a significant impact on its function, performance, quality, reliability and cost. When designing a gerotor motor all these features must be considered. A gerotor motor can be classified into two types based on the geometric design; gerolor (pin design) and gerotor (nonpin design). In this article, geometric parameters of the two design types are discussed briefly and the operation of the gerotor motor is described as well. A numerical analysis is carried out by using computational fluid dynamics (CFD) tool (PumpLinx) to analyze the fluid flow and predict the performance of both types of gerotor designs. Various characteristics of the two designs of the gerotor motor are investigated and compared which include the gerotor design, fluid flowrate, velocity, pressure and output torque. Comparison of the results found out that using pin design gerotor motor, the flowrate, flow velocity, pressure and torque will vary greatly. Nonpin design can significantly reduce variations in all the flow characteristics thereby enhancing the stability and reduction in the leakage risk.
- 8 March 2022
- Published by ASME International in Journal of Fluids Engineering
- Vol. 144 (8)
Flow Characteristics of Gerotor Motors With Pin and Nonpin Designs
The geometric design of a gerotor motor has a significant impact on its function, performance, quality, reliability and cost. When designing a gerotor motor all these features must be considered. A gerotor motor can be classified into two types based on the geometric design; gerolor (pin design) and gerotor (nonpin design). In this article, geometric parameters of the two design types are discussed briefly and the operation of the gerotor motor is described as well. A numerical analysis is carried out by using computational fluid dynamics (CFD) tool (PumpLinx) to analyze the fluid flow and predict the performance of both types of gerotor designs. Various characteristics of the two designs of the gerotor motor are investigated and compared which include the gerotor design, fluid flowrate, velocity, pressure and output torque. Comparison of the results found out that using pin design gerotor motor, the flowrate, flow velocity, pressure and torque will vary greatly. Nonpin design can significantly reduce variations in all the flow characteristics thereby enhancing the stability and reduction in the leakage risk.
- 22 March 2019
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 41 (4) , 186
Performance prediction method of cycloidal speed reducers
- 22 March 2019
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 41 (4) , 186
Performance prediction method of cycloidal speed reducers
- 9 July 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 140 (11)
Dynamics Analysis of the Triangular Rotary Engine Structures
A triangular rotary engine includes several main components such as an eccentric shaft, a sun gear, a triangular rotor, a chamber, and apex seals. This study constructs the mathematical models for the chamber and triangular rotor profiles in a rotary engine, as well as for the kinematics and contact force of its apex seals by using the epitrochoid and envelope principles. The chamber profile is represented by design parameter, trochoid ratio, whose limitations are investigated together with the volume ratio. To simplify the calculation, the dynamics analysis model ignores the effects of combustion and thermal conditions in rotary engines. Gas force effect is taken into account by first constructing a fluid analysis model that measures the gas fluid moment on the triangular rotor. Then, based on the mathematical models of chamber and rotor, a systematic dynamics analysis model for a rotary engine is built. It allows analyzing the kinematics and the stress variations in all components of the engine. The dynamics model considers both output shaft torsion and fluid moment. The dynamics analysis then uses three cases of trochoid ratio to illustrate the effects of chamber profile design on the system dynamics properties of rotary engines. The results not only show the dynamic properties and differences in various mechanism designs but also indicate the stability and stress level in the components. In conclusion, the higher trochoid ratio with a larger variation in the chamber profile curvature reduces system stability and increases vibrations, stress fluctuations, and large stress peaks risk.
- 9 July 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 140 (11)
Dynamics Analysis of the Triangular Rotary Engine Structures
A triangular rotary engine includes several main components such as an eccentric shaft, a sun gear, a triangular rotor, a chamber, and apex seals. This study constructs the mathematical models for the chamber and triangular rotor profiles in a rotary engine, as well as for the kinematics and contact force of its apex seals by using the epitrochoid and envelope principles. The chamber profile is represented by design parameter, trochoid ratio, whose limitations are investigated together with the volume ratio. To simplify the calculation, the dynamics analysis model ignores the effects of combustion and thermal conditions in rotary engines. Gas force effect is taken into account by first constructing a fluid analysis model that measures the gas fluid moment on the triangular rotor. Then, based on the mathematical models of chamber and rotor, a systematic dynamics analysis model for a rotary engine is built. It allows analyzing the kinematics and the stress variations in all components of the engine. The dynamics model considers both output shaft torsion and fluid moment. The dynamics analysis then uses three cases of trochoid ratio to illustrate the effects of chamber profile design on the system dynamics properties of rotary engines. The results not only show the dynamic properties and differences in various mechanism designs but also indicate the stability and stress level in the components. In conclusion, the higher trochoid ratio with a larger variation in the chamber profile curvature reduces system stability and increases vibrations, stress fluctuations, and large stress peaks risk.
- 29 November 2015
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 230 (4) , 665-681
The effect on dynamics of using various transmission designs for two-stage cycloidal speed reducers
This paper investigates different transmission methods for a two-stage speed reducer by analyzing component motion and stress conditions during reducer operation. First, an exemplar (set) speed-reducing ratio is used to develop four differently structured two-stage speed reducers: a traditional design using two serially connected single-stage speed reducers, an Rotate Vector (RV) reducer constructed by serially connecting a cycloid speed reducer and an involute planet gear reducer, and two new concept designs. The first new concept named “New design 1” has a pin component in which a cam pair and pins connect two-stage cycloidal gears having different tooth numbers. The second new concept named “New design 2” has a center disc component in which a cam pair symmetrically connects two-stage cycloid gears with different tooth numbers. These four structural types of two-stage speed reducer form the basis for a system dynamics analysis model used to analyze the main components’ motion and stress variation conditions. Besides, this study also carries out the cycloid internal gear (nonpinwheel design) to replace the pinwheel in these four-structured two-stage speed reducers. The results highlight the differences and shortcomings of the four transmissions with pinwheel and nonpinwheel designs, including the dynamic load imbalance and stress peaks phenomena caused by design inadequacies.
- 29 November 2015
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 230 (4) , 665-681
The effect on dynamics of using various transmission designs for two-stage cycloidal speed reducers
This paper investigates different transmission methods for a two-stage speed reducer by analyzing component motion and stress conditions during reducer operation. First, an exemplar (set) speed-reducing ratio is used to develop four differently structured two-stage speed reducers: a traditional design using two serially connected single-stage speed reducers, an Rotate Vector (RV) reducer constructed by serially connecting a cycloid speed reducer and an involute planet gear reducer, and two new concept designs. The first new concept named “New design 1” has a pin component in which a cam pair and pins connect two-stage cycloidal gears having different tooth numbers. The second new concept named “New design 2” has a center disc component in which a cam pair symmetrically connects two-stage cycloid gears with different tooth numbers. These four structural types of two-stage speed reducer form the basis for a system dynamics analysis model used to analyze the main components’ motion and stress variation conditions. Besides, this study also carries out the cycloid internal gear (nonpinwheel design) to replace the pinwheel in these four-structured two-stage speed reducers. The results highlight the differences and shortcomings of the four transmissions with pinwheel and nonpinwheel designs, including the dynamic load imbalance and stress peaks phenomena caused by design inadequacies.
- 12 August 2015
- Published by EDP Sciences in Mechanics & Industry
- Vol. 16 (6) , 601
Flow characteristics of Roots pumps with multistage designs by CFD investigation
This study conducts a fluid analysis of multistage designs for a Roots pump, a type of positive displacement pump applied in blower and vacuum pumps. After a rotor profile is generated based on a mathematical model of a rotor, a three-dimensional numerical approach is developed using computational fluid dynamics (CFD) and applied to investigate the effect of multistage pump design on flow characteristics. The effects of serial versus parallel designs on fluid are illustrated using a two-lobed rotor. The fluid analysis, which pays particular attention to favorable stages, shows that in both serial and parallel connection designs, having more than three stages improves flow characteristics but to a relatively small degree because of increased leakage. It identifies the three-stage design as offering the greatest economy for pumping performance enhancement. A similar analysis is then performed on a three-lobed rotor design using the same three-stage design. A comparison of the flow characteristics of the two- versus three-lobed rotors based on serial versus parallel design and identical chamber volume identifies specific variations in flow rate, pressure, and pulsation.
- 12 August 2015
- Published by EDP Sciences in Mechanics & Industry
- Vol. 16 (6) , 601
Flow characteristics of Roots pumps with multistage designs by CFD investigation
This study conducts a fluid analysis of multistage designs for a Roots pump, a type of positive displacement pump applied in blower and vacuum pumps. After a rotor profile is generated based on a mathematical model of a rotor, a three-dimensional numerical approach is developed using computational fluid dynamics (CFD) and applied to investigate the effect of multistage pump design on flow characteristics. The effects of serial versus parallel designs on fluid are illustrated using a two-lobed rotor. The fluid analysis, which pays particular attention to favorable stages, shows that in both serial and parallel connection designs, having more than three stages improves flow characteristics but to a relatively small degree because of increased leakage. It identifies the three-stage design as offering the greatest economy for pumping performance enhancement. A similar analysis is then performed on a three-lobed rotor design using the same three-stage design. A comparison of the flow characteristics of the two- versus three-lobed rotors based on serial versus parallel design and identical chamber volume identifies specific variations in flow rate, pressure, and pulsation.
- Open Access
- 27 July 2015
- Published by Canadian Center of Science and Education in Mechanical Engineering Research
- Vol. 5 (2) , 114
The Influence of Design Parameters on Straight Bevel Gear Dynamics
This study analyzes the influence of design parameters on the dynamics of straight bevel gears by constructing a model that allows variation in the shaft angle, pressure angle, and backlash. According to the statistical analysis, the order of influence of these parameters on weight is shaft angle > pressure angle > backlash. When the shaft angle is 90°, the statistical results show the drive is stable and the stress fluctuation level is low. The pressure angle, on the other hand, can affect the gear’s dynamic property by influencing the driving component force on the gear and the component force on the shaft. The results for the shaft and pressure angles are used to determine the appropriate backlash. Overall, the analysis not only provides designers with an important reference but explains the dominance in the market of gear designs with a 90° shaft angle and a 20° pressure angle.
- 27 July 2015
- Published by Canadian Center of Science and Education in Mechanical Engineering Research
- Vol. 5 (2) , 114
Open AccessThe Influence of Design Parameters on Straight Bevel Gear Dynamics
This study analyzes the influence of design parameters on the dynamics of straight bevel gears by constructing a model that allows variation in the shaft angle, pressure angle, and backlash. According to the statistical analysis, the order of influence of these parameters on weight is shaft angle > pressure angle > backlash. When the shaft angle is 90°, the statistical results show the drive is stable and the stress fluctuation level is low. The pressure angle, on the other hand, can affect the gear’s dynamic property by influencing the driving component force on the gear and the component force on the shaft. The results for the shaft and pressure angles are used to determine the appropriate backlash. Overall, the analysis not only provides designers with an important reference but explains the dominance in the market of gear designs with a 90° shaft angle and a 20° pressure angle.
- 1 April 2015
- Published by ASME International in Journal of Fluids Engineering
- Vol. 137 (4) , 041107
Flow Characteristics of Gerotor Pumps With Novel Variable Clearance Designs
Although gerotor pumps are used in a wide range of industrial applications, higher work pressure causes shock or collision among pump components, which leads to large stress fluctuations and shortened pump life expectancy. This paper therefore proposes a novel variable clearance design that diminishes such component collisions. After a geometric mathematical model is constructed of variable clearance rotors, a fluid analysis model is developed based on a relief groove design. Applying the model to two fixed clearance and three variable clearance designs demonstrates the effects of various fixed clearance sizes on gerotor pump performance and identifies the differences between fixed and variable clearance designs. The results support the feasibility of the proposed design: the appropriate variable clearance designs maintain robust flow characteristics and effectively reduce shock and collision among pump components, thereby reducing stress level, increasing stability, and extending the life expectancy of the gerotor pumps.
- 1 April 2015
- Published by ASME International in Journal of Fluids Engineering
- Vol. 137 (4) , 041107
Flow Characteristics of Gerotor Pumps With Novel Variable Clearance Designs
Although gerotor pumps are used in a wide range of industrial applications, higher work pressure causes shock or collision among pump components, which leads to large stress fluctuations and shortened pump life expectancy. This paper therefore proposes a novel variable clearance design that diminishes such component collisions. After a geometric mathematical model is constructed of variable clearance rotors, a fluid analysis model is developed based on a relief groove design. Applying the model to two fixed clearance and three variable clearance designs demonstrates the effects of various fixed clearance sizes on gerotor pump performance and identifies the differences between fixed and variable clearance designs. The results support the feasibility of the proposed design: the appropriate variable clearance designs maintain robust flow characteristics and effectively reduce shock and collision among pump components, thereby reducing stress level, increasing stability, and extending the life expectancy of the gerotor pumps.
- Open Access
- 5 January 2015
- Published by Canadian Center of Science and Education in Mechanical Engineering Research
- Vol. 5 (1) , p1
Effects of Various Geometric Designs on the Flow Characteristics of a Triangular Rotary Engine
Although rotary engines can potentially be used as hydrogen fuel engines, the contact condition between the casing and the apex seal on the triangular rotor impacts sealing performance, which then directly affects leakage problems. In this paper, therefore, a rotary engine’s internal gas flow characteristics are investigated by using the CFD package FLUENT to construct a fluid analysis model. For comparative convenience, assuming that the simulated gas is air, and then, using a set circular radius outside the casing, analyze three different cases with various geometric design parameters (the K factor) and their effects on the internal pressure, streamlining, and leakage. The results indicate that the K factor design produces different rotor profiles with different working chamber volumes: the lower the K factor, the larger the working chamber volume. Nevertheless, although this design can improve the combustion and compression efficiencies, it may lead to increased internal pressure variation and raised pressure. In addition, when the clearance is small, it may result in a larger leakage problem, negatively affecting rotary engine performance.
- 5 January 2015
- Published by Canadian Center of Science and Education in Mechanical Engineering Research
- Vol. 5 (1) , p1
Open AccessEffects of Various Geometric Designs on the Flow Characteristics of a Triangular Rotary Engine
Although rotary engines can potentially be used as hydrogen fuel engines, the contact condition between the casing and the apex seal on the triangular rotor impacts sealing performance, which then directly affects leakage problems. In this paper, therefore, a rotary engine’s internal gas flow characteristics are investigated by using the CFD package FLUENT to construct a fluid analysis model. For comparative convenience, assuming that the simulated gas is air, and then, using a set circular radius outside the casing, analyze three different cases with various geometric design parameters (the K factor) and their effects on the internal pressure, streamlining, and leakage. The results indicate that the K factor design produces different rotor profiles with different working chamber volumes: the lower the K factor, the larger the working chamber volume. Nevertheless, although this design can improve the combustion and compression efficiencies, it may lead to increased internal pressure variation and raised pressure. In addition, when the clearance is small, it may result in a larger leakage problem, negatively affecting rotary engine performance.