Pierre Colin Nürnberger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pierre Colin Nürnberger has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Seifried
I. Physikalisches Institut, Universität zu Köln
5 shared publications - Stefanie Walch
Universität zu Köln, I. Physikalisches Institut
5 shared publications - Tim-Eric Rathjen
I. Physikalisches Institut, Universität zu Köln , Zülpicher Str 77, D-50937 Köln
4 shared publications - Seamus D. Clarke
Department of Physics, National Cheng Kung University
3 shared publications - Elisabeth M. A. Borchert
School of Physics and Astronomy, Monash University , Vic 3800, Australia
2 shared publications - Philipp Girichidis
Universitat Heidelberg, Zentrum fur Astronomie, Institut fur theoretische Astrophysik
2 shared publications
Latest Publications
- Open Access
- 10 November 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 715, A149
Impact of cosmic-ray acceleration on the early evolution of bow shocks around massive runaway stars
Context . Bow shocks generated from the interaction of winds from massive runaway stars with the interstellar medium have been shown to be prominent particle accelerators through recent γ -ray and radio synchrotron observations. They are ideal candidates for exploring the space- and time-dependence of particle acceleration due to their axisymmetric morphology and short dynamical timescales (∼100 kyr). Aims . Current studies on the particle acceleration from bow shocks investigate the cosmic-ray (CR) transport only in the test-particle limit. We aim to bridge this gap by conducting ideal cosmic-ray magnetohydrodynamic simulations in the advection-diffusion limit that accelerate CRs at spatially resolved shocks at each timestep. We qualitatively compared with current observations through the expected γ -ray and synchrotron emission. Methods . We performed 3D ideal cosmic-ray magnetohydrodynamic simulations with the Eulerian grid-based code FLASH, where stellar winds are injected through tabulated wind velocities and mass-loss rates. We implemented a gradient-based shock-detection algorithm to resolve the shocked regions where the CRs are injected dynamically. Simulations were performed for different values of the CR diffusion coefficient and star velocities within an ISM-like environment up to 500 kyr to show the impact of dynamical CR injection on the early evolution of the wind-driven bow shock. With a simplified spectral model in post-processing, we calculated the expected upper limits of γ -ray and synchrotron emission and compared the results with those from current observations. Results . Variations of CR diffusion rates can strongly dictate the morphology of the bow shock and the overall γ -ray and radio synchrotron luminosity due to the balance between the CR injection efficiency and diffusion. Our results are underestimated compared to those from current observations, even with an overestimated particle acceleration, primarily due to the weaker wind kinematic luminosities we used and the lack of a stellar magnetic field in our model. Conclusions . The morphology of wind-driven bow shocks and their non-thermal emission can be substantially affected by CR acceleration and diffusion, if there is efficient particle acceleration at shocks.
- 10 November 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 715, A149
Open AccessImpact of cosmic-ray acceleration on the early evolution of bow shocks around massive runaway stars
Context . Bow shocks generated from the interaction of winds from massive runaway stars with the interstellar medium have been shown to be prominent particle accelerators through recent γ -ray and radio synchrotron observations. They are ideal candidates for exploring the space- and time-dependence of particle acceleration due to their axisymmetric morphology and short dynamical timescales (∼100 kyr). Aims . Current studies on the particle acceleration from bow shocks investigate the cosmic-ray (CR) transport only in the test-particle limit. We aim to bridge this gap by conducting ideal cosmic-ray magnetohydrodynamic simulations in the advection-diffusion limit that accelerate CRs at spatially resolved shocks at each timestep. We qualitatively compared with current observations through the expected γ -ray and synchrotron emission. Methods . We performed 3D ideal cosmic-ray magnetohydrodynamic simulations with the Eulerian grid-based code FLASH, where stellar winds are injected through tabulated wind velocities and mass-loss rates. We implemented a gradient-based shock-detection algorithm to resolve the shocked regions where the CRs are injected dynamically. Simulations were performed for different values of the CR diffusion coefficient and star velocities within an ISM-like environment up to 500 kyr to show the impact of dynamical CR injection on the early evolution of the wind-driven bow shock. With a simplified spectral model in post-processing, we calculated the expected upper limits of γ -ray and synchrotron emission and compared the results with those from current observations. Results . Variations of CR diffusion rates can strongly dictate the morphology of the bow shock and the overall γ -ray and radio synchrotron luminosity due to the balance between the CR injection efficiency and diffusion. Our results are underestimated compared to those from current observations, even with an overestimated particle acceleration, primarily due to the weaker wind kinematic luminosities we used and the lack of a stellar magnetic field in our model. Conclusions . The morphology of wind-driven bow shocks and their non-thermal emission can be substantially affected by CR acceleration and diffusion, if there is efficient particle acceleration at shocks.
- Open Access
- 7 October 2025
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 543 (4) , 4286-4311
SILCC – IX. The multiphase interstellar medium at low metallicity
The gas-phase metallicity affects heating and cooling processes in the star-forming galactic interstellar medium (ISM) as well as ionizing luminosities, wind strengths, and lifetimes of massive stars. To investigate its impact, we conduct magnetohydrodynamic simulations of the ISM using the flash code as part of the silcc project. The simulations assume a gas surface density of 10 M$_\odot$ pc$^{-2}$ and span metallicities from 1/50 to 1 Z$_\odot$. We include non-equilibrium thermochemistry, a space- and time-variable far-UV background and cosmic ray ionization rate, metal-dependent stellar tracks, the formation of H ii regions, stellar winds, type II supernovae, and cosmic ray injection and transport. With the metallicity decreasing over the investigated range, the star formation rate decreases by more than a factor of 10, the mass fraction of cold gas decreases from 60 per cent to 2.3 per cent, while the volume filling fraction of the warm gas increases from 20 per cent to 80 per cent. Furthermore, the fraction of H$_\mathrm{2}$ in the densest regions drops by a factor of 4, and the dense ISM fragments into approximately five times fewer structures at the lowest metallicity. Outflow mass loading factors remain largely unchanged, with values close to unity, except for a significant decline at the lowest metallicity. Including the major processes that regulate ISM properties, this study highlights the strong impact of gas phase metallicity on the star-forming ISM.
- 7 October 2025
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 543 (4) , 4286-4311
Open AccessSILCC – IX. The multiphase interstellar medium at low metallicity
The gas-phase metallicity affects heating and cooling processes in the star-forming galactic interstellar medium (ISM) as well as ionizing luminosities, wind strengths, and lifetimes of massive stars. To investigate its impact, we conduct magnetohydrodynamic simulations of the ISM using the flash code as part of the silcc project. The simulations assume a gas surface density of 10 M$_\odot$ pc$^{-2}$ and span metallicities from 1/50 to 1 Z$_\odot$. We include non-equilibrium thermochemistry, a space- and time-variable far-UV background and cosmic ray ionization rate, metal-dependent stellar tracks, the formation of H ii regions, stellar winds, type II supernovae, and cosmic ray injection and transport. With the metallicity decreasing over the investigated range, the star formation rate decreases by more than a factor of 10, the mass fraction of cold gas decreases from 60 per cent to 2.3 per cent, while the volume filling fraction of the warm gas increases from 20 per cent to 80 per cent. Furthermore, the fraction of H$_\mathrm{2}$ in the densest regions drops by a factor of 4, and the dense ISM fragments into approximately five times fewer structures at the lowest metallicity. Outflow mass loading factors remain largely unchanged, with values close to unity, except for a significant decline at the lowest metallicity. Including the major processes that regulate ISM properties, this study highlights the strong impact of gas phase metallicity on the star-forming ISM.
- Open Access
- 14 May 2025
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 540 (2) , 1462-1490
SILCC – VIII. The impact of far-ultraviolet radiation on star formation and the interstellar medium
We present magnetohydrodynamic simulations of star formation in the multiphase interstellar medium (ISM) to quantify the impact of non-ionizing far-ultraviolet (FUV) radiation within the Silcc Project simulation framework. Our study incorporates the radiative transfer of ionizing radiation and self-consistent modelling of variable FUV radiation from star clusters, advancing beyond previous studies using static or simplified FUV fields. This enables a more accurate capture of the dynamic interaction between radiation and the evolving ISM alongside other stellar feedback channels. The interstellar radiation field (ISRF) near young star clusters can reach $G_0 \approx 10^4$ (in Habing units), far exceeding the solar neighbourhood value of $G_0 = 1.7$. Despite these high intensities, FUV radiation minimally impacts the integrated star formation rate compared to ionizing radiation, stellar winds, and supernovae. A slight reduction in star formation burstiness is linked to increased photoelectric (PE) heating efficiency by the variable FUV field. Dust near star-forming regions can be heated up to 60 K via the PE effect, with a broad temperature distribution. PE heating rates in variable FUV models exhibit higher peaks but lower averages than static ISRF models. Simulations under solar neighbourhood conditions without stellar winds or ionizing radiation but with supernovae yield unexpectedly high star formation rates of $\sim 0.1~\mathrm{M_\odot ~yr^{-1}~kpc^{-2}}$. Our analysis reveals increased cold neutral medium volume-filling factors (VFF) outside stellar clusters, reduced thermally unstable gas, and sharper warm–cold gas separation. The variable FUV field also promotes a cold diffuse gas phase with a molecular component, exhibiting a VFF of $\sim 5{-}10$ per cent.- 14 May 2025
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 540 (2) , 1462-1490
Open AccessSILCC – VIII. The impact of far-ultraviolet radiation on star formation and the interstellar medium
We present magnetohydrodynamic simulations of star formation in the multiphase interstellar medium (ISM) to quantify the impact of non-ionizing far-ultraviolet (FUV) radiation within the Silcc Project simulation framework. Our study incorporates the radiative transfer of ionizing radiation and self-consistent modelling of variable FUV radiation from star clusters, advancing beyond previous studies using static or simplified FUV fields. This enables a more accurate capture of the dynamic interaction between radiation and the evolving ISM alongside other stellar feedback channels. The interstellar radiation field (ISRF) near young star clusters can reach $G_0 \approx 10^4$ (in Habing units), far exceeding the solar neighbourhood value of $G_0 = 1.7$. Despite these high intensities, FUV radiation minimally impacts the integrated star formation rate compared to ionizing radiation, stellar winds, and supernovae. A slight reduction in star formation burstiness is linked to increased photoelectric (PE) heating efficiency by the variable FUV field. Dust near star-forming regions can be heated up to 60 K via the PE effect, with a broad temperature distribution. PE heating rates in variable FUV models exhibit higher peaks but lower averages than static ISRF models. Simulations under solar neighbourhood conditions without stellar winds or ionizing radiation but with supernovae yield unexpectedly high star formation rates of $\sim 0.1~\mathrm{M_\odot ~yr^{-1}~kpc^{-2}}$. Our analysis reveals increased cold neutral medium volume-filling factors (VFF) outside stellar clusters, reduced thermally unstable gas, and sharper warm–cold gas separation. The variable FUV field also promotes a cold diffuse gas phase with a molecular component, exhibiting a VFF of $\sim 5{-}10$ per cent. - Open Access
- 11 January 2024
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 528 (2) , 1555-1572
GMF G214.5-1.8 as traced by CO: I – cloud-scale CO freeze-out as a result of a low cosmic-ray ionization rate
We present an analysis of the outer Galaxy giant molecular filament (GMF) G214.5-1.8 (G214.5) using IRAM 30m data of 12CO, 13CO, and C18O. We find that the 12CO (1-0) and (2-1) derived excitation temperatures are near identical and are very low, with a median of 8.2 K, showing that the gas is extremely cold across the whole cloud. Investigating the abundance of 13CO across G214.5, we find that there is a significantly lower abundance along the entire 13 pc spine of the filament, extending out to a radius of ∼0.8 pc, corresponding to Av ≳ 2 mag and Tdust ≲ 13.5 K. Due to this, we attribute the decrease in abundance to CO freeze-out, making G214.5 the largest scale example of freeze-out yet. We construct an axisymmetric model of G214.5’s 13CO volume density considering freeze-out and find that to reproduce the observed profile significant depletion is required beginning at low volume densities, n ≳ 2000 cm−3. Freeze-out at this low number density is possible only if the cosmic-ray ionization rate is ∼1.9 × 10−18 s−1, an order of magnitude below the typical value. Using time scale arguments, we posit that such a low ionization rate may lead to ambipolar diffusion being an important physical process along G214.5’s entire spine. We suggest that if low cosmic-ray ionization rates are more common in the outer Galaxy, and other quiescent regions, cloud-scale CO freeze-out occurring at low column and number densities may also be more prevalent, having consequences for CO observations and their interpretation.
- 11 January 2024
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 528 (2) , 1555-1572
Open AccessGMF G214.5-1.8 as traced by CO: I – cloud-scale CO freeze-out as a result of a low cosmic-ray ionization rate
We present an analysis of the outer Galaxy giant molecular filament (GMF) G214.5-1.8 (G214.5) using IRAM 30m data of 12CO, 13CO, and C18O. We find that the 12CO (1-0) and (2-1) derived excitation temperatures are near identical and are very low, with a median of 8.2 K, showing that the gas is extremely cold across the whole cloud. Investigating the abundance of 13CO across G214.5, we find that there is a significantly lower abundance along the entire 13 pc spine of the filament, extending out to a radius of ∼0.8 pc, corresponding to Av ≳ 2 mag and Tdust ≲ 13.5 K. Due to this, we attribute the decrease in abundance to CO freeze-out, making G214.5 the largest scale example of freeze-out yet. We construct an axisymmetric model of G214.5’s 13CO volume density considering freeze-out and find that to reproduce the observed profile significant depletion is required beginning at low volume densities, n ≳ 2000 cm−3. Freeze-out at this low number density is possible only if the cosmic-ray ionization rate is ∼1.9 × 10−18 s−1, an order of magnitude below the typical value. Using time scale arguments, we posit that such a low ionization rate may lead to ambipolar diffusion being an important physical process along G214.5’s entire spine. We suggest that if low cosmic-ray ionization rates are more common in the outer Galaxy, and other quiescent regions, cloud-scale CO freeze-out occurring at low column and number densities may also be more prevalent, having consequences for CO observations and their interpretation.
- 17 May 2023
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 523 (1) , 1421-1440
How do supernova remnants cool? – I. Morphology, optical emission lines, and shocks
Supernovae (SNe) inject ∼1051 erg in the interstellar medium, thereby shocking and heating the gas. A substantial fraction of this energy is later lost via radiative cooling. We present a post-processing module for the flash code to calculate the cooling radiation from shock-heated gas using collisional excitation data from mappings v. When applying this tool to a simulated SN remnant (SNR), we find that most energy is emitted in the EUV. However, optical emission lines ([O III], [N II], [S II], Hα, Hβ) are usually best observable. Our shock detection scheme shows that [S II] and [N II] emissions arise from the thin shell surrounding the SNR, while [O III], H|$\rm \alpha$|, and H|$\rm \beta$| originate from the volume-filling hot gas inside the SNR bubble. We find that the optical emission lines are affected by the SNR’s complex structure and its projection onto the plane of the sky because the escaping line luminosity can be reduced by 10 – 80% due to absorption along the line-of-sight. Additionally, the subtraction of contaminating background radiation is required for the correct classification of an SNR on the oxygen or sulphur BPT diagrams. The electron temperature and density obtained from our synthetic observations match well with the simulation but are very sensitive to the assumed metallicity.
- 17 May 2023
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 523 (1) , 1421-1440
How do supernova remnants cool? – I. Morphology, optical emission lines, and shocks
Supernovae (SNe) inject ∼1051 erg in the interstellar medium, thereby shocking and heating the gas. A substantial fraction of this energy is later lost via radiative cooling. We present a post-processing module for the flash code to calculate the cooling radiation from shock-heated gas using collisional excitation data from mappings v. When applying this tool to a simulated SN remnant (SNR), we find that most energy is emitted in the EUV. However, optical emission lines ([O III], [N II], [S II], Hα, Hβ) are usually best observable. Our shock detection scheme shows that [S II] and [N II] emissions arise from the thin shell surrounding the SNR, while [O III], H|$\rm \alpha$|, and H|$\rm \beta$| originate from the volume-filling hot gas inside the SNR bubble. We find that the optical emission lines are affected by the SNR’s complex structure and its projection onto the plane of the sky because the escaping line luminosity can be reduced by 10 – 80% due to absorption along the line-of-sight. Additionally, the subtraction of contaminating background radiation is required for the correct classification of an SNR on the oxygen or sulphur BPT diagrams. The electron temperature and density obtained from our synthetic observations match well with the simulation but are very sensitive to the assumed metallicity.
- 23 November 2021
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 510 (1) , 753-773
Synthetic CO emission and the XCO factor of young molecular clouds: a convergence study
The properties of synthetic CO emission from 3D simulations of forming molecular clouds are studied within the SILCC-Zoom project. Since the time-scales of cloud evolution and molecule formation are comparable, the simulations include a live chemical network. Two sets of simulations with an increasing spatial resolution (dx = 3.9 pc to dx = 0.06 pc) are used to investigate the convergence of the synthetic CO emission, which is computed by post-processing the simulation data with the radmc-3d radiative transfer code. To determine the excitation conditions, it is necessary to include atomic hydrogen and helium alongside H2, which increases the resulting CO emission by ∼7–26 per cent. Combining the brightness temperature of 12CO and 13CO, we compare different methods to estimate the excitation temperature, the optical depth of the CO line and hence, the CO column density. An intensity-weighted average excitation temperature results in the most accurate estimate of the total CO mass. When the pixel-based excitation temperature is used to calculate the CO mass, it is over-/underestimated at low/high CO column densities where the assumption that 12CO is optically thick while 13CO is optically thin is not valid. Further, in order to obtain a converged total CO luminosity and hence 〈XCO〉 factor, the 3D simulation must have dx ≲ 0.1 pc. The 〈XCO〉 evolves over time and differs for the two clouds; yet pronounced differences with numerical resolution are found. Since high column density regions with a visual extinction larger than 3 mag are not resolved for dx ≳ 1 pc, in this case the H2 mass and CO luminosity both differ significantly from the higher resolution results and the local XCO is subject to strong noise. Our calculations suggest that synthetic CO emission maps are only converged for simulations with dx ≲ 0.1 pc.
- 23 November 2021
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 510 (1) , 753-773
Synthetic CO emission and the XCO factor of young molecular clouds: a convergence study
The properties of synthetic CO emission from 3D simulations of forming molecular clouds are studied within the SILCC-Zoom project. Since the time-scales of cloud evolution and molecule formation are comparable, the simulations include a live chemical network. Two sets of simulations with an increasing spatial resolution (dx = 3.9 pc to dx = 0.06 pc) are used to investigate the convergence of the synthetic CO emission, which is computed by post-processing the simulation data with the radmc-3d radiative transfer code. To determine the excitation conditions, it is necessary to include atomic hydrogen and helium alongside H2, which increases the resulting CO emission by ∼7–26 per cent. Combining the brightness temperature of 12CO and 13CO, we compare different methods to estimate the excitation temperature, the optical depth of the CO line and hence, the CO column density. An intensity-weighted average excitation temperature results in the most accurate estimate of the total CO mass. When the pixel-based excitation temperature is used to calculate the CO mass, it is over-/underestimated at low/high CO column densities where the assumption that 12CO is optically thick while 13CO is optically thin is not valid. Further, in order to obtain a converged total CO luminosity and hence 〈XCO〉 factor, the 3D simulation must have dx ≲ 0.1 pc. The 〈XCO〉 evolves over time and differs for the two clouds; yet pronounced differences with numerical resolution are found. Since high column density regions with a visual extinction larger than 3 mag are not resolved for dx ≳ 1 pc, in this case the H2 mass and CO luminosity both differ significantly from the higher resolution results and the local XCO is subject to strong noise. Our calculations suggest that synthetic CO emission maps are only converged for simulations with dx ≲ 0.1 pc.
- Open AccessSynthetic CO emission and the $X_{\rm CO}$ factor of young molecular clouds: a convergence studyThe properties of synthetic CO emission from 3D simulations of forming molecular clouds are studied within the SILCC-Zoom project. Since the time scales of cloud evolution and molecule formation are comparable, the simulations include a live chemical network. Two sets of simulations with an increasing spatial resolution (d$x=3.9$ pc to d$x=0.06$ pc) are used to investigate the convergence of the synthetic CO emission, which is computed by post-processing the simulation data with the RADMC-3D radiative transfer code. To determine the excitation conditions, it is necessary to include atomic hydrogen and helium alongside H$_2$, which increases the resulting CO emission by ~7-26 per cent. Combining the brightness temperature of $^{12}$CO and $^{13}$CO, we compare different methods to estimate the excitation temperature, the optical depth of the CO line and hence, the CO column density. An intensity-weighted average excitation temperature results in the most accurate estimate of the total CO mass. When the pixel-based excitation temperature is used to calculate the CO mass, it is over-/underestimated at low/high CO column densities where the assumption that $^{12}$CO is optically thick while $^{13}$CO is optically thin is not valid. Further, in order to obtain a converged total CO luminosity and hence <$X_{\rm CO}$> factor, the 3D simulation must have d$x\lesssim0.1$ pc. The <$X_{\rm CO}$> evolves over time and differs for the two clouds; yet pronounced differences with numerical resolution are found. Since high column density regions with a visual extinction larger than 3~mag are not resolved for d$x\gtrsim 1$~pc, in this case the H$_2$ mass and CO luminosity both differ significantly from the higher resolution results and the local $X_{\rm CO}$ is subject to strong noise. Our calculations suggest that synthetic CO emission maps are only converged for simulations with d$x\lesssim 0.1$ pc.Open AccessSynthetic CO emission and the $X_{\rm CO}$ factor of young molecular clouds: a convergence studyThe properties of synthetic CO emission from 3D simulations of forming molecular clouds are studied within the SILCC-Zoom project. Since the time scales of cloud evolution and molecule formation are comparable, the simulations include a live chemical network. Two sets of simulations with an increasing spatial resolution (d$x=3.9$ pc to d$x=0.06$ pc) are used to investigate the convergence of the synthetic CO emission, which is computed by post-processing the simulation data with the RADMC-3D radiative transfer code. To determine the excitation conditions, it is necessary to include atomic hydrogen and helium alongside H$_2$, which increases the resulting CO emission by ~7-26 per cent. Combining the brightness temperature of $^{12}$CO and $^{13}$CO, we compare different methods to estimate the excitation temperature, the optical depth of the CO line and hence, the CO column density. An intensity-weighted average excitation temperature results in the most accurate estimate of the total CO mass. When the pixel-based excitation temperature is used to calculate the CO mass, it is over-/underestimated at low/high CO column densities where the assumption that $^{12}$CO is optically thick while $^{13}$CO is optically thin is not valid. Further, in order to obtain a converged total CO luminosity and hence <$X_{\rm CO}$> factor, the 3D simulation must have d$x\lesssim0.1$ pc. The <$X_{\rm CO}$> evolves over time and differs for the two clouds; yet pronounced differences with numerical resolution are found. Since high column density regions with a visual extinction larger than 3~mag are not resolved for d$x\gtrsim 1$~pc, in this case the H$_2$ mass and CO luminosity both differ significantly from the higher resolution results and the local $X_{\rm CO}$ is subject to strong noise. Our calculations suggest that synthetic CO emission maps are only converged for simulations with d$x\lesssim 0.1$ pc.