SLShan Lin

Shan Lin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Shan Lin has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Review and Decision-Making Tree for Methods to Balance Indoor Environmental Comfort and Energy Conservation During Building Operation

    by Shan Lin, Yu Zhang, Xuanjiang Chen, Chengzhi Pan, Xianjun Dong, Xiang Xie, Long Chen

    Effective building operation requires a careful balance between energy conservation and indoor environmental comfort. Although numerous methods have been developed to reduce energy consumption during the operational phase, their objectives and applications vary widely. However, the complexity of building energy management makes it challenging to identify the most suitable methods that simultaneously achieve both comfort and efficiency goals. Existing studies often lack a systematic framework that supports integrated decision-making under comfort constraints. This research aims to address this gap by proposing a decision-making tree for selecting energy conservation methods during building operation with an explicit consideration of indoor environmental comfort. A comprehensive literature review is conducted to identify four main energy-consuming components during building operation: the building envelope, HVAC systems, lighting systems, and plug loads and appliances. Three key comfort indicators—thermal comfort, lighting comfort, and air quality comfort—are defined, and energy conservation methods are categorized into three strategic groups: passive strategies, control optimization strategies, and behavioural intervention strategies. Each method is assessed using a defined set of evaluation criteria. Subsequently, a questionnaire survey is administered for the calibration of the decision tree, incorporating stakeholder preferences and expert judgement. The findings contribute to the advancement of understanding regarding the co-optimization of energy conservation and occupant comfort in building operations.


  • Open Access

    Analysis of Stray Current Leakage in Subway Traction Power Supply System Based on Field-Circuit Coupling

    by Shan Lin, Zhixi Tang, Xia Chen, Xuehua Liu, Yunsheng Liu

    In a rail transit system, there is a constant leakage of current from the subway rails to the earth, and these stray currents have complex propagation paths and a wide range of influence. Since no stray current collection devices are installed at subway depots, some of the stray current leaking from the mainline will converge at the depot, seriously corroding the structural reinforcement and buried metal of the station, thereby jeopardizing the normal operation of subway trains and passenger safety. In this paper, a field-circuit coupling method is proposed to analyze the current leakage and distribution law of the subway mainline and depot. It is found that the failure of the gauge block at the mainline will trigger the maximum leakage of rail current. Additionally, it is observed that the stray current distribution at the depot is mainly influenced by the operating status of the one-way conduction device (OWCD) and the change of rail potential. These results validate the applicability and effectiveness of the field-circuit coupling method proposed in this paper and provide new technical support for the study of stray current leakage distribution in subways.


  • Open Access

    A magnetic field prediction method based on UNet++ with the addition of Inception module

    by Shan Lin, Jie Gao, Liang Jin, Yu Yang

    Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.


  • Open Access

    Deformation Law of Tunnels Using Double-Sidewall Guide Pit Method under Different Excavation Sequences

    by Yanmei Ruan, Xu Luo, Jin Li, Yang Li, Shan Lin, Chengkun Ling, Bingxiang Yuan

    The double-sidewall guide pit method finds extensive application in the construction of large cross-section tunnels in soft rock strata due to its minimal disruption to the surrounding rock, thereby enhancing tunnel stability. To investigate the loading and deformation patterns of the surrounding rock and tunnel support using the double-sidewall guide pit method, this study compares the impacts of various construction sequences on surface settlement, surrounding rock stress, and lining stress using indoor model tests. The experimental results show that after excavating the upper guide hole on one side, the excavation of the lower guide hole on the same side is carried out. The upper and lower support structures form a closed loop, and the structure can better constrain the surrounding rock and control the deformation of the surrounding rock, whereas the lower structure can share the stresses suffered by the upper structure. Therefore, compared with the upper and lower excavation methods, the surface settlement caused by the left and right excavation methods is smaller, the disturbance to the surrounding rock is smaller, and the supporting structure is more evenly and stably stressed in the excavation process.


  • Open Access

    Modeling the Salinity Effect on the Water Retention Curve of Geosynthetic Clay Liner (GCL) on the Drying Path

    by Zhenming Zeng, Yi Lu, Tong Wan, Shan Lin, Xingzhong Nong, Jiajun Sun

    The water retention curve (WRC) of a geosynthetic clay liner (GCL) is influenced by the presence of exchangeable cations in the leachate during changes in water content in a landfill construction. This research aims to investigate the impact of salinity on the WRC of GCL. To measure the WRC of GCL under different sodium chloride (NaCl) concentrations on the drying path, a chilled-mirror dew-point device capable of controlling the GCL’s volume was employed. Additionally, the dry state microstructure of the GCL was examined using electron microscopy. The test outcomes indicate that GCL hydrated with higher salinity has greater suction at the same water content during drying. This influence can be attributed to changes in salinity and the precipitation of NaCl crystals within the bentonite when water evaporates, which in turn affects the bentonite’s microstructure and leads to increased matric suction. By introducing the Fredlund and Xing model and parameter relationship, it is possible to predict the WRC of GCL under salinity effects after measuring the WRC under different salinity conditions on the drying path.


  • Open Access

    Multimodal Deep Neural Network-Based Sensor Data Anomaly Diagnosis Method for Structural Health Monitoring

    by Xingzhong Nong, Xu Luo, Shan Lin, Yanmei Ruan, Xijun Ye

    Due to sensor failure, noise interference and other factors, the data collected in the structural health monitoring (SHM) system will show a variety of abnormal patterns, which will bring great uncertainty to the structural safety assessment. This paper proposes an automatic data anomaly diagnosis method for SHM based on a multimodal deep neural network. In order to improve the detection accuracy, both two-dimensional and one-dimensional features of the sensor data are fused in the multimodal deep neural network. The network consists of two convolutional neural network (CNN) channels, one a 2D-CNN channel for extracting time–frequency features of sensor data and the other a 1D-CNN channel for extracting raw one-dimensional features of sensor data. After convolution and pooling operations for the sensor data by the 2D channel and 1D channel separately, the two types of extracted features are flattened into one-dimensional vectors and concatenated at the concatenation layer. The concatenated vector is then fed into fully connected layers for final SHM data anomaly classification. In order to evaluate the reliability of the proposed method, the monitored data lasting for one month of a long-span cable-stayed bridge were used for training, validation, and testing. Six types of training conditions (missing, minor, outlier, over-range oscillation, trend, and drift) are studied and analyzed to address the issue of imbalanced training data. With an accuracy rate of 95.10%, the optimal model demonstrates the effectiveness and capability of the proposed method. The proposed method shows a promising future as a reliable AI-assisted digital tool for safety assessment in structural health monitoring systems.


  • Open Access

    Compression Behavior of Rubber–Bentonite Mixture under Different Salinities

    by Tong Wan, Yi Lu, Zhenming Zeng, Zeli Xie, Shan Lin, Xingzhong Nong

    This study investigated the engineering properties of a rubber–bentonite mixture under different salt solution concentrations, mass ratios, and consolidation pressures. In addition, the effects of different solute ion concentrations on the compression index of the samples were compared. The results showed that the compression coefficient could be reduced effectively by increasing the weight percentage of rubber without being affected by the salt solution. However, with the increase in the salt solution concentration, the compression coefficient of mixed materials with different mass ratios increased, and when the salt solution concentration exceeded 0.5 mol/L, the compression coefficient increased more obviously. In a 0.1 mol/L NaCl solution, the addition of different levels of rubber could increase the compression modulus of the mixed material and reduce the compression ratio of the mixed material. This showed that in an environment with a low salt solution concentration, adding rubber into the mixed material could enhance its compressive deformation resistance. However, when the rubber content exceeded 50%, significant pores appeared in the sample, and the effect of high salt solution concentration intensified. The rubber content also had an effect on the swelling properties of soil, and the degradation of rubber in the salt solution showed reduced mechanical properties. This emphasizes the need to consider the stability and resistance of saline–alkali areas to salt erosion.


  • Open Access

    Preliminary Mechanical Evaluation of Grouting Concrete as a Protective Layer for Tunnelling

    by Yi Lu, Tong Wan, Xiangyun Huang, Jiahui Lu, Shan Lin, Xingzhong Nong

    The aim of this study is to introduce a protective layer to safeguard tunnel structures. In practice, one viable approach to create this protective layer between the tunnel structure and surrounding rocks is to pump the material during tunnel construction. The primary components of the proposed material are porous sand, rubber, and cement. Static and dynamic experiments were conducted to assess the unconfined compressive strength (UCS), flexural stiffness, and compaction resistance at various mixing ratios. The results indicate that the addition of porous sand decreases the UCS compared to the solid sand under similar mixing conditions. The addition of rubber offers the elasticity, thereby enhancing the compaction resistance. However, increasing the rubber content compromises UCS. Furthermore, this study presents a linear equation to predict the 7-day UCS, which can be used as a rapid estimation for UCS, flexural stiffness, and compaction resistance of the proposed material. It is important to note that this study only investigates the fundamental mechanical properties of the proposed material, and further comprehensive research is necessary to fully understand its workability, durability, and other behaviour before practical application.


  • Open Access

    Research on High-Torque-Density Design for Axial Modular Flux-Reversal Permanent Magnet Machine

    by Shan Lin, Lanchao Chang, Peng Su, Yongjian Li, Wei Hua, Yi Shen

    The traditional flux reversal permanent magnet (FRPM) machine has high torque ripple due to the double salient-pole structure, and the effective air-gap length is increased by the permanent magnet structure of the stator tooth surface, which affects the size of the air-gap magnetomotive force (MMF). This paper proposes an axial modular flux-reversal permanent magnet (AM-FRPM) machine with attractive torque capabilities. Based on air-gap magnetic field modulation theory, a method to achieve optimal air-gap harmonic torque contributions was developed. Then, the principle for high-torque-density generation in the AM-FRPM machine under an alternating magnetization topology was investigated using the PM magnetic field modulation and armature reaction magnetic field modulation. In addition, the cogging torque suppression mechanism, which guides the selection of stator-slot and rotor-pole combinations, was investigated. In addition, a comprehensive comparison of the electromagnetic characteristics of two AM-FRPM machines and a traditional FRPM machine was conducted. Then, the advantages and disadvantages of the three machines were analyzed. Finally, prototypes were manufactured and tested to verify the correctness of the theoretical analysis.


  • Multiparallel and Flexible Expansion of Single-Switch WPT Inverter by Magnetic Integration

    by Zhihao Guo, Chunfang Wang, Shan Lin, Lingyun Yang, Xinyu Lu

    Aiming at the problem that the single-switch inverter for wireless power transmission circuit cannot realize the parallel connection of three or more inverters, a scheme that can arbitrarily expand the number of parallel inverters by changing the circuit structure is proposed. In this article, the current sharing coil (InterCell Transformer) is used to share the current between the branches to improve the system's stability. By adding a current-increasing LC resonant network, the output voltage can be adjusted more flexibly, and the system volume can be reduced by applying the principle of magnetic integration. Then, the complex frequency-domain model is innovatively used to accurately express the single-switch inverter circuit, which is conducive to the equivalent analysis of its various derived circuits. Finally, a parallel experimental prototype is built. When the output voltage is 164 V and the current is 11 A, the maximum efficiency is 92.1%. The experimental results show that the scheme is reasonable, feasible, and reliable.