Muhammed Zahid Ozturk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Muhammed Zahid Ozturk has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Beibei Wang
Origin Research, Rockville, MD, USA
6 shared publications - K. J. Ray Liu
Origin Research, Rockville, Maryland, USA
6 shared publications Chenshu Wu
Origin Research, Rockville, MD, USA
3 shared publications- Chenshu Wu
The University of Hong Kong, Hong Kong, Hong Kong
2 shared publications - Min Wu
University of Maryland College Park
2 shared publications Beibei Wang
Origin Wireless, Inc., Rockville, MD, USA
1 shared publication
Latest Publications
- Open Access
- 6 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 662-663
Poster Abstract: Robust Deep Learning Based Residential Occupancy Detection With WiFi
- 6 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 662-663
Open AccessPoster Abstract: Robust Deep Learning Based Residential Occupancy Detection With WiFi
- Open Access
- 4 December 2024
- Published by Association for Computing Machinery (ACM)
- p. 1796-1798
Audioradio Target Speech Detection and Extraction with mmWave Sensing
Detecting the target speaker and enhancing speech with high fidelity has been a long-standing problem, especially in challenging acoustic conditions. To address these problems with minimal user cooperation, we have developed multimodal audioradio speech detection (RadioVAD) and enhancement (RadioSES) systems using mmWave modality. This demo presents how these two systems can be run together in real time to extract target speech and filter any type of ambient noise. Our demo uses an mmWave radar and a microphone attached to a laptop to detect and localize target speakers in the field of view, detect the presence of voice to trigger the microphone, and enhance the noisy speech with a deep learning model running in real-time. Our experiments confirm that an audioradio system can detect and isolate high-fidelity target speech, even with interfering speech and noise; while being privacy preserving and environmentally robust.
- 4 December 2024
- Published by Association for Computing Machinery (ACM)
- p. 1796-1798
Open AccessAudioradio Target Speech Detection and Extraction with mmWave Sensing
Detecting the target speaker and enhancing speech with high fidelity has been a long-standing problem, especially in challenging acoustic conditions. To address these problems with minimal user cooperation, we have developed multimodal audioradio speech detection (RadioVAD) and enhancement (RadioSES) systems using mmWave modality. This demo presents how these two systems can be run together in real time to extract target speech and filter any type of ambient noise. Our demo uses an mmWave radar and a microphone attached to a laptop to detect and localize target speakers in the field of view, detect the presence of voice to trigger the microphone, and enhance the noisy speech with a deep learning model running in real-time. Our experiments confirm that an audioradio system can detect and isolate high-fidelity target speech, even with interfering speech and noise; while being privacy preserving and environmentally robust.
- 29 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (15) , 26005-26019
RadioVAD: mmWave-Based Noise and Interference-Resilient Voice Activity Detection
Voice interfaces have become one of the most ubiquitous human–computer interaction methods in recent years. Voice activity detection (VAD) is typically the first building block of a complex voice interface, often relying on audio signals. Acoustics-based VAD systems do not perform well in noisy and interference-prone environments. Smart assistants mitigate this problem by using a dictionary-based detection system. However, this approach is limited in its applicability. For instance, users may still need to manually mute and unmute their microphones during online meetings to prevent detection of interfering users, and speech leakage. In order to automate voice detection in challenging environments without these limitations, we propose RadioVAD, a noise and interference-resilient VAD system that uses radio modality, which is already available in various smartphones and home assistants. RadioVAD works by detecting possible human presence in the Field of View of the device, extracting the vocal fold’s vibration signal from the target speaker, and utilizing a time-domain neural network on raw radio signals to detect voice activity. Extensive experiments reveal that RadioVAD can detect voice activity in challenging environments with high accuracy and outperforms audio-based VAD when the audio signal has signal-to-noise ratio below 5 dB. Furthermore, RadioVAD reduces false alarm rate in interference-prone environments by 52%–72%, bringing significant improvements to VAD task. RadioVAD lays the foundation for future voice interfaces utilizing radio modality.
- 29 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (15) , 26005-26019
RadioVAD: mmWave-Based Noise and Interference-Resilient Voice Activity Detection
Voice interfaces have become one of the most ubiquitous human–computer interaction methods in recent years. Voice activity detection (VAD) is typically the first building block of a complex voice interface, often relying on audio signals. Acoustics-based VAD systems do not perform well in noisy and interference-prone environments. Smart assistants mitigate this problem by using a dictionary-based detection system. However, this approach is limited in its applicability. For instance, users may still need to manually mute and unmute their microphones during online meetings to prevent detection of interfering users, and speech leakage. In order to automate voice detection in challenging environments without these limitations, we propose RadioVAD, a noise and interference-resilient VAD system that uses radio modality, which is already available in various smartphones and home assistants. RadioVAD works by detecting possible human presence in the Field of View of the device, extracting the vocal fold’s vibration signal from the target speaker, and utilizing a time-domain neural network on raw radio signals to detect voice activity. Extensive experiments reveal that RadioVAD can detect voice activity in challenging environments with high accuracy and outperforms audio-based VAD when the audio signal has signal-to-noise ratio below 5 dB. Furthermore, RadioVAD reduces false alarm rate in interference-prone environments by 52%–72%, bringing significant improvements to VAD task. RadioVAD lays the foundation for future voice interfaces utilizing radio modality.
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ACM Transactions on Audio, Speech, and Language Processing
- Vol. 31 (23299290) , 1333-1347
RadioSES: mmWave-Based Audioradio Speech Enhancement and Separation System
Speech enhancement and separation have been a long-standing problem, especially with the recent advances using a single microphone. Although microphones perform well in constrained settings, their performance for speech separation decreases in noisy conditions. In this work, we propose RadioSES , an audioradio speech enhancement and separation system that overcomes inherent problems in audio-only systems. By fusing a complementary radio modality, RadioSES can estimate the number of speakers, solve the source association problem, separate and enhance noisy mixture speeches, and improve both intelligibility and perceptual quality. We perform millimeter-wave sensing to detect and localize speakers and introduce an audioradio deep learning framework to fuse the separate radio features with the mixed audio features. Extensive experiments using commercial off-the-shelf devices show that RadioSES outperforms a variety of state-of-the-art baselines, with consistent performance gains in different environmental settings. Similar to the audiovisual methods, RadioSES provides significant performance improvements 3 dB gains in SiSDR, when compared with the corresponding audio-only method, along with the benefits of lower computational complexity and better privacy preservation.
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ACM Transactions on Audio, Speech, and Language Processing
- Vol. 31 (23299290) , 1333-1347
RadioSES: mmWave-Based Audioradio Speech Enhancement and Separation System
Speech enhancement and separation have been a long-standing problem, especially with the recent advances using a single microphone. Although microphones perform well in constrained settings, their performance for speech separation decreases in noisy conditions. In this work, we propose RadioSES , an audioradio speech enhancement and separation system that overcomes inherent problems in audio-only systems. By fusing a complementary radio modality, RadioSES can estimate the number of speakers, solve the source association problem, separate and enhance noisy mixture speeches, and improve both intelligibility and perceptual quality. We perform millimeter-wave sensing to detect and localize speakers and introduce an audioradio deep learning framework to fuse the separate radio features with the mixed audio features. Extensive experiments using commercial off-the-shelf devices show that RadioSES outperforms a variety of state-of-the-art baselines, with consistent performance gains in different environmental settings. Similar to the audiovisual methods, RadioSES provides significant performance improvements 3 dB gains in SiSDR, when compared with the corresponding audio-only method, along with the benefits of lower computational complexity and better privacy preservation.
- 24 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 10 (7) , 6221-6234
Robust Passive Proximity Detection Using Wi-Fi
Indoor target detection through motion sensing based on Wi-Fi signals has gained much attention recently. However, most of the existing motion detection approaches can only detect motion in a large coverage area without knowing the distance of the target motion from the transmitter (Tx)/receiver (Rx). Passive positioning techniques can provide the location of a target, which, however, requires high deployment efforts without robust performance. In this article, we present a novel technique for detecting motion in proximity by exploring the physics behind the indoor radio frequency (RF) multipath propagation. We discover that motion in the proximity of the Rx/Tx produces distinct time dispersion over the radio channel at the Rx/Tx side. By exploring two novel metrics and linking them with the distance of the motions to antennas, we are able to precisely distinguish motions in nearby proximity from the motions far away. Extensive experiments in various real-world scenarios demonstrate that the proposed scheme can achieve true positive rates (TPRs) greater than 95% and 99% in distance-based and room-level proximity detection, respectively, while maintaining the corresponding false positive rates (FPRs) less than 5% and 0.5%. The detection delays for a detection distance of 2 m are within 0.6 s, which verifies the responsiveness of the proposed scheme.
- 24 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 10 (7) , 6221-6234
Robust Passive Proximity Detection Using Wi-Fi
Indoor target detection through motion sensing based on Wi-Fi signals has gained much attention recently. However, most of the existing motion detection approaches can only detect motion in a large coverage area without knowing the distance of the target motion from the transmitter (Tx)/receiver (Rx). Passive positioning techniques can provide the location of a target, which, however, requires high deployment efforts without robust performance. In this article, we present a novel technique for detecting motion in proximity by exploring the physics behind the indoor radio frequency (RF) multipath propagation. We discover that motion in the proximity of the Rx/Tx produces distinct time dispersion over the radio channel at the Rx/Tx side. By exploring two novel metrics and linking them with the distance of the motions to antennas, we are able to precisely distinguish motions in nearby proximity from the motions far away. Extensive experiments in various real-world scenarios demonstrate that the proposed scheme can achieve true positive rates (TPRs) greater than 95% and 99% in distance-based and room-level proximity detection, respectively, while maintaining the corresponding false positive rates (FPRs) less than 5% and 0.5%. The detection delays for a detection distance of 2 m are within 0.6 s, which verifies the responsiveness of the proposed scheme.
- 28 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 10 (5) , 4431-4448
RadioMic: Sound Sensing via Radio Signals
Voice interfaces have become an integral part of our lives with the proliferation of smart devices. Today, Internet of Things devices mainly rely on microphones to sense sound. Microphones, however, have fundamental limitations, such as weak source separation, limited range in the presence of acoustic insulation, and being prone to multiple side-channel attacks. In this article, we propose RadioMic, a radio-based sound sensing system to mitigate these issues and enrich sound applications. RadioMic constructs sound based on tiny vibrations on active sources (e.g., a speaker diaphragm) or object surfaces (e.g., paper bag), and can work through walls, even a soundproof one. To convert the extremely weak sound vibration in the radio signals into sound signals, RadioMic introduces radio acoustics, and presents training-free approaches for robust sound detection and high-fidelity sound recovery. It then exploits a neural network to further enhance the recovered sound by expanding the recoverable frequencies and reducing the noises. RadioMic translates massive online audios to synthesized data to train the network and, thus, minimizes the need for radio-frequency (RF) data. We thoroughly evaluate different components of RadioMic under different scenarios using a commodity mmWave radar. The results show RadioMic outperforms the state-of-the-art systems significantly. We believe RadioMic provides new horizons for sound sensing and inspires attractive sensing capabilities of mmWave sensing devices.
- 28 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 10 (5) , 4431-4448
RadioMic: Sound Sensing via Radio Signals
Voice interfaces have become an integral part of our lives with the proliferation of smart devices. Today, Internet of Things devices mainly rely on microphones to sense sound. Microphones, however, have fundamental limitations, such as weak source separation, limited range in the presence of acoustic insulation, and being prone to multiple side-channel attacks. In this article, we propose RadioMic, a radio-based sound sensing system to mitigate these issues and enrich sound applications. RadioMic constructs sound based on tiny vibrations on active sources (e.g., a speaker diaphragm) or object surfaces (e.g., paper bag), and can work through walls, even a soundproof one. To convert the extremely weak sound vibration in the radio signals into sound signals, RadioMic introduces radio acoustics, and presents training-free approaches for robust sound detection and high-fidelity sound recovery. It then exploits a neural network to further enhance the recovered sound by expanding the recoverable frequencies and reducing the noises. RadioMic translates massive online audios to synthesized data to train the network and, thus, minimizes the need for radio-frequency (RF) data. We thoroughly evaluate different components of RadioMic under different scenarios using a commodity mmWave radar. The results show RadioMic outperforms the state-of-the-art systems significantly. We believe RadioMic provides new horizons for sound sensing and inspires attractive sensing capabilities of mmWave sensing devices.
- 26 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 9 (1) , 546-557
GaitCube: Deep Data Cube Learning for Human Recognition With Millimeter-Wave Radio
Monitoring and identifying gait has recently emerged as a promising solution candidate for unobtrusive human recognition. In order to enable ubiquitous and reliable application, a gait recognition system must be robust to environment changes and easy to use without requiring too much user cooperation and recalibration, while maintaining high accuracy, which is often not satisfied in conventional approaches. In this article, we present $\boldsymbol {GaitCube}$ , a high-accuracy gait recognition system with the minimal training requirement using a single commodity millimeter-wave (mmWave) radio. To reduce the training overhead, we propose gait data cube , a novel 3-D joint-feature representation of micro-Doppler and micro-range signatures over time that can comprehensively embody the physical relevant features of one’s gait. With a pipeline of signal processing, $\boldsymbol {GaitCube}$ can automatically detect and segment human walking and effectively extract the gait data cubes . We implement and evaluate $\boldsymbol {GaitCube}$ through experiments conducted at six different locations in a typical indoor space with ten subjects over a month, resulting in >50000 gait instances. The results show that $\boldsymbol {GaitCube}$ achieves an accuracy of 96.1% with a single gait cycle using one receive antenna, and the accuracy increases to 98.3% when combining all the receive antennas. Further, it achieves an average recognition accuracy of 79.1% for testing over different times and unseen locations by using only 2 min of training data collected in a single location, enabling a practical and ubiquitous gait-based identification.
- 26 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 9 (1) , 546-557
GaitCube: Deep Data Cube Learning for Human Recognition With Millimeter-Wave Radio
Monitoring and identifying gait has recently emerged as a promising solution candidate for unobtrusive human recognition. In order to enable ubiquitous and reliable application, a gait recognition system must be robust to environment changes and easy to use without requiring too much user cooperation and recalibration, while maintaining high accuracy, which is often not satisfied in conventional approaches. In this article, we present $\boldsymbol {GaitCube}$ , a high-accuracy gait recognition system with the minimal training requirement using a single commodity millimeter-wave (mmWave) radio. To reduce the training overhead, we propose gait data cube , a novel 3-D joint-feature representation of micro-Doppler and micro-range signatures over time that can comprehensively embody the physical relevant features of one’s gait. With a pipeline of signal processing, $\boldsymbol {GaitCube}$ can automatically detect and segment human walking and effectively extract the gait data cubes . We implement and evaluate $\boldsymbol {GaitCube}$ through experiments conducted at six different locations in a typical indoor space with ten subjects over a month, resulting in >50000 gait instances. The results show that $\boldsymbol {GaitCube}$ achieves an accuracy of 96.1% with a single gait cycle using one receive antenna, and the accuracy increases to 98.3% when combining all the receive antennas. Further, it achieves an average recognition accuracy of 79.1% for testing over different times and unseen locations by using only 2 min of training data collected in a single location, enabling a practical and ubiquitous gait-based identification.