Shumpei Kameyama
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shumpei Kameyama has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
Masaharu Imaki
Mitsubishi Electric Corporation
5 shared publicationsYoshihito Hirano
Information Technology R&D Center, Mitsubishi Electric Corporation, Kamakura, Japan
5 shared publicationsDaisuke Sakaizawa
Japan Aerospace Exploration Agency
4 shared publicationsTakayuki Yanagisawa
4 shared publicationsMasakatsu Nakajima
3 shared publicationsMasashi Furuta
Communication Systems Center, Mitsubishi Electric Corporation, Amagasaki, Hyogo, Japan
3 shared publications
Latest Publications
- 14 October 2024
- Published by Optica Publishing Group in Optics Continuum
- Vol. 3 (10) , 2014-2023
Visible-wavelength and monostatic coherent transceiver with independent second harmonic generation on transmitted and local lights using commercially available lithium niobate phase modulator for fundamental wavelength
We propose what we believe to be a new monostatic coherent transceiver at visible wavelength using a commercially available lithium niobate (LiNbO3) phase modulator (LNPM), which is capable of high-speed, wide-bandwidth, and multi-functional operation. The proposed coherent transceiver needs successful heterodyne detection with independent second harmonic generation (SHG) on transmitted and local lights. Experimental proof of the above-mentioned heterodyne detection is shown. The proof of concept for the application to continuous-waves coherent Doppler lidar (CW-CDL) is shown in both free-space and underwater sensing. Preliminary experiment regarding high-speed and wide-bandwidth modulation is additionally shown.
- 14 October 2024
- Published by Optica Publishing Group in Optics Continuum
- Vol. 3 (10) , 2014-2023
Visible-wavelength and monostatic coherent transceiver with independent second harmonic generation on transmitted and local lights using commercially available lithium niobate phase modulator for fundamental wavelength
We propose what we believe to be a new monostatic coherent transceiver at visible wavelength using a commercially available lithium niobate (LiNbO3) phase modulator (LNPM), which is capable of high-speed, wide-bandwidth, and multi-functional operation. The proposed coherent transceiver needs successful heterodyne detection with independent second harmonic generation (SHG) on transmitted and local lights. Experimental proof of the above-mentioned heterodyne detection is shown. The proof of concept for the application to continuous-waves coherent Doppler lidar (CW-CDL) is shown in both free-space and underwater sensing. Preliminary experiment regarding high-speed and wide-bandwidth modulation is additionally shown.
- 16 May 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (11) , 2890-2893
Beam swinging coherent Doppler wind lidar utilizing wavelength switching through a single telescope
We have developed a new, to the best of our knowledge, beam swinging coherent Doppler wind lidar (BS-CDWL) by employing a wavelength switching method using mass-produced components for wavelength division multiplexing (WDM) optical communication systems. This BS-CDWL also has a single and position-to-angle conversion telescope for multiple LOS measurement which contributes to cost-effectiveness. Preliminary wind sensing result is shown with measurable range of up to 350 m.
- 16 May 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (11) , 2890-2893
Beam swinging coherent Doppler wind lidar utilizing wavelength switching through a single telescope
We have developed a new, to the best of our knowledge, beam swinging coherent Doppler wind lidar (BS-CDWL) by employing a wavelength switching method using mass-produced components for wavelength division multiplexing (WDM) optical communication systems. This BS-CDWL also has a single and position-to-angle conversion telescope for multiple LOS measurement which contributes to cost-effectiveness. Preliminary wind sensing result is shown with measurable range of up to 350 m.
- 1 April 2024
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (4) , 042002
Investigation of single-particle detection of continuous-wave coherent Doppler lidar: theoretical feasibility and performance comparison with multiple-particle detection state
Single-particle detection with a continuous-wave coherent Doppler lidar (CW-CDL) is an interesting event. Even though some experimental results have been shown in previous literature as evidence of single-particle detection, these results have not been verified from a theoretical point of view. Here, the performance of a CW-CDL with single-particle detection is investigated. Examples of single-particle detection that have been reported in previous literature are verified using theoretical simulation. Furthermore, comparison of signal detection ability between single- and multiple-particle cases is also performed theoretically.
- 1 April 2024
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (4) , 042002
Investigation of single-particle detection of continuous-wave coherent Doppler lidar: theoretical feasibility and performance comparison with multiple-particle detection state
Single-particle detection with a continuous-wave coherent Doppler lidar (CW-CDL) is an interesting event. Even though some experimental results have been shown in previous literature as evidence of single-particle detection, these results have not been verified from a theoretical point of view. Here, the performance of a CW-CDL with single-particle detection is investigated. Examples of single-particle detection that have been reported in previous literature are verified using theoretical simulation. Furthermore, comparison of signal detection ability between single- and multiple-particle cases is also performed theoretically.
- 21 February 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (7) , 1681-1694
Theoretical performance of a 1.5-µm satellite-borne coherent Doppler wind lidar using a planar waveguide optical amplifier with a demonstrated figure of merit: simulation of signal detection probability, measurement precision, and bias
We report performance of a satellite-borne coherent Doppler wind lidar (SCDWL), which equips a planer waveguide amplifier (PWA) operating in a wavelength of 1.5 µm. The performance is defined by detection probability, measurement precision, and bias, and is characterized with a Doppler wind lidar (DWL) simulation that considers a realistic wind velocity profile, and instrumental and atmospheric parameters. Among the parameters, we carefully model those related to the PWA whose figure of merit has great impact on the performance of SCDWL and has shown rapid improvement in recent years. Moreover, we introduce three models for a backscattering coefficient (high, moderate, and low) to assess the influence from variation of atmospheric backscattering. Our simulation demonstrates that the SCDWL can work with reasonable performance for the target altitude of 6 km in the case of the high-backscattering model. The simulation also exhibits that the SCDWL can observe wind velocity at the altitude of 12 km if improved instrumental parameters or higher backscattering coefficients are considered. In addition, we reveal that non-uniform wind velocity distribution degrades the performance of the SCDWL and induces a bias between measured and real wind velocity.
- 21 February 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (7) , 1681-1694
Theoretical performance of a 1.5-µm satellite-borne coherent Doppler wind lidar using a planar waveguide optical amplifier with a demonstrated figure of merit: simulation of signal detection probability, measurement precision, and bias
We report performance of a satellite-borne coherent Doppler wind lidar (SCDWL), which equips a planer waveguide amplifier (PWA) operating in a wavelength of 1.5 µm. The performance is defined by detection probability, measurement precision, and bias, and is characterized with a Doppler wind lidar (DWL) simulation that considers a realistic wind velocity profile, and instrumental and atmospheric parameters. Among the parameters, we carefully model those related to the PWA whose figure of merit has great impact on the performance of SCDWL and has shown rapid improvement in recent years. Moreover, we introduce three models for a backscattering coefficient (high, moderate, and low) to assess the influence from variation of atmospheric backscattering. Our simulation demonstrates that the SCDWL can work with reasonable performance for the target altitude of 6 km in the case of the high-backscattering model. The simulation also exhibits that the SCDWL can observe wind velocity at the altitude of 12 km if improved instrumental parameters or higher backscattering coefficients are considered. In addition, we reveal that non-uniform wind velocity distribution degrades the performance of the SCDWL and induces a bias between measured and real wind velocity.
- 12 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-9
Theoretical Performance of Airborne Coherent Doppler Lidar for Turbulence Detection Using Spectral Width Estimation of Heterodyne-Detected Signal
The theoretical performance of an airborne coherent Doppler lidar (CDL) for turbulence detections is shown. Irregular wind fluctuation which causes aircraft vertical acceleration is defined as turbulence. The detection method is based on spectral width estimation of a heterodyne-detected signal. The equations for simulation are derived by referring the one for a Doppler radar. Performance theory on a CDL is additionally utilized to derive the equations. Probabilities of missed and false hazard indication are simulated with an example set of input parameters. The simulated turbulence detectable range roughly agrees with past experimental results. The contents of this paper can contribute to the future establishment of minimum operational performance standards (MOPS) for turbulence detection using an airborne CDLs.
- 12 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-9
Theoretical Performance of Airborne Coherent Doppler Lidar for Turbulence Detection Using Spectral Width Estimation of Heterodyne-Detected Signal
The theoretical performance of an airborne coherent Doppler lidar (CDL) for turbulence detections is shown. Irregular wind fluctuation which causes aircraft vertical acceleration is defined as turbulence. The detection method is based on spectral width estimation of a heterodyne-detected signal. The equations for simulation are derived by referring the one for a Doppler radar. Performance theory on a CDL is additionally utilized to derive the equations. Probabilities of missed and false hazard indication are simulated with an example set of input parameters. The simulated turbulence detectable range roughly agrees with past experimental results. The contents of this paper can contribute to the future establishment of minimum operational performance standards (MOPS) for turbulence detection using an airborne CDLs.
- 12 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (19) , 6157-6168
Intensity-Modulated Direct-Detection Doppler LiDAR Using Pseudo-Random Code and Optical Direct Down-Conversion of Modulation Frequency for Range and Speed Measurement of a Hard Target
Intensity-modulated direct-detection Doppler LiDAR (IM-DDDL) with pseudo-random code is demonstrated for range and speed measurement of a hard target. This IM-DDDL has key features of (i) long-time coherent signal accumulation without requirement of narrow-linewidth laser source, (ii) high receiving sensitivity with optical direct down-conversion of modulation frequency, (iii) ranging using pseudo-random code, and (iv) Doppler shift detection at baseband frequency. These features are demonstrated in preliminary experiments with fiber-based circuit at 1550 nm wavelength which has eye-safety. The employment of fiber-based configuration contributes to compactness and reliability of the instrument. Ranging function using pseudo-random code is suitable for prevention from interference between multiple LiDARs. The condition for detecting Doppler frequency shift is also shown. A moving stroke of a target within a measurement time needs to be enough larger than the wavelength of modulation frequency. Process for future practical use and application to volumetric target sensing are additionally investigated.
- 12 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (19) , 6157-6168
Intensity-Modulated Direct-Detection Doppler LiDAR Using Pseudo-Random Code and Optical Direct Down-Conversion of Modulation Frequency for Range and Speed Measurement of a Hard Target
Intensity-modulated direct-detection Doppler LiDAR (IM-DDDL) with pseudo-random code is demonstrated for range and speed measurement of a hard target. This IM-DDDL has key features of (i) long-time coherent signal accumulation without requirement of narrow-linewidth laser source, (ii) high receiving sensitivity with optical direct down-conversion of modulation frequency, (iii) ranging using pseudo-random code, and (iv) Doppler shift detection at baseband frequency. These features are demonstrated in preliminary experiments with fiber-based circuit at 1550 nm wavelength which has eye-safety. The employment of fiber-based configuration contributes to compactness and reliability of the instrument. Ranging function using pseudo-random code is suitable for prevention from interference between multiple LiDARs. The condition for detecting Doppler frequency shift is also shown. A moving stroke of a target within a measurement time needs to be enough larger than the wavelength of modulation frequency. Process for future practical use and application to volumetric target sensing are additionally investigated.
- 22 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-12
Performance Simulation Theory of Low-Level Wind Shear Detections Using an Airborne Coherent Doppler Lidar Based on RTCA DO-220
The performance simulation theory of low-level wind shear (LLWS) detection using an airborne coherent Doppler lidar (CDL) is shown. The simulation theory that this performance is based on is analogous to the turbulence and wind shear detections with an airborne Doppler radar, as specified in Radio Technical Commission for Aeronautics (RTCA) document (DO)-220A. Prior theoretical studies of CDL regarding (i) signal-to-noise ratio (SNR) equation, (ii) relation between SNR and wind sensing performance, and (iii) atmospheric parameters are fully utilized. An example simulation result under a practical condition satisfies the requirements to specify minimum operational performance standards (MOPS) in DO-220A. Further, the simulation result is well aligned with past experimental results on the detectable range of LLWS. The results of this study can be utilized to establish MOPS for LLWS detections using an airborne CDL in the future.
- 22 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-12
Performance Simulation Theory of Low-Level Wind Shear Detections Using an Airborne Coherent Doppler Lidar Based on RTCA DO-220
The performance simulation theory of low-level wind shear (LLWS) detection using an airborne coherent Doppler lidar (CDL) is shown. The simulation theory that this performance is based on is analogous to the turbulence and wind shear detections with an airborne Doppler radar, as specified in Radio Technical Commission for Aeronautics (RTCA) document (DO)-220A. Prior theoretical studies of CDL regarding (i) signal-to-noise ratio (SNR) equation, (ii) relation between SNR and wind sensing performance, and (iii) atmospheric parameters are fully utilized. An example simulation result under a practical condition satisfies the requirements to specify minimum operational performance standards (MOPS) in DO-220A. Further, the simulation result is well aligned with past experimental results on the detectable range of LLWS. The results of this study can be utilized to establish MOPS for LLWS detections using an airborne CDL in the future.
- 19 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (21) , 20389-20400
Compact and MEMS-Scanner-Based 3-D Imaging LiDAR With Wide Scanning Angle of 147.5° × 11.6° Using Multiple Transmitters and a Single Small Photodetector With Diameter of 0.5 mm
The three-dimensional (3D) imaging light detection and ranging (LiDAR) with wide scanning angle of 147.5 deg × 11.6 deg is shown. The LiDAR has the micro-electro mechanical system (MEMS) scanner which is the electromagnetic driving type produced by the silicon on insulator (SOI) process. The scanner has a large aperture size of 7 mm × 5 mm with the mechanical tilt angle of ±12.5 deg × ±3.4 deg. The rib structure of the MEMS mirror realizes the small distortion on the mirror surface in addition to the lightweight. The three laser diodes (LDs) are used to realize the wide scanning angle. The optics has the unique design and covers the three transmitting directions of the LDs with only one small photodetector which has a diameter of 0.5 mm. This single photodetector configuration contributes to the compactness in addition to low cost. The maximum measurable range of 40 m is demonstrated with the frame rate of 28 fps and 282 × 31 pixels.
- 19 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (21) , 20389-20400
Compact and MEMS-Scanner-Based 3-D Imaging LiDAR With Wide Scanning Angle of 147.5° × 11.6° Using Multiple Transmitters and a Single Small Photodetector With Diameter of 0.5 mm
The three-dimensional (3D) imaging light detection and ranging (LiDAR) with wide scanning angle of 147.5 deg × 11.6 deg is shown. The LiDAR has the micro-electro mechanical system (MEMS) scanner which is the electromagnetic driving type produced by the silicon on insulator (SOI) process. The scanner has a large aperture size of 7 mm × 5 mm with the mechanical tilt angle of ±12.5 deg × ±3.4 deg. The rib structure of the MEMS mirror realizes the small distortion on the mirror surface in addition to the lightweight. The three laser diodes (LDs) are used to realize the wide scanning angle. The optics has the unique design and covers the three transmitting directions of the LDs with only one small photodetector which has a diameter of 0.5 mm. This single photodetector configuration contributes to the compactness in addition to low cost. The maximum measurable range of 40 m is demonstrated with the frame rate of 28 fps and 282 × 31 pixels.
- 17 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-10
Evidence of Decreased Heterodyne-Detection Efficiency Caused by Fast Beam Scanning in Wind Sensing Coherent Doppler Lidar, and Demonstration on Recovery of the Efficiency With Lag-Angle Compensation
The experimental evidence of the decreased heterodyne-detection efficiency caused by the lag-angle is shown using a long-range wind sensing coherent Doppler lidar (CDL) with fast beam scanning. The recovery of the efficiency with the lag-angle compensation is also demonstrated. The receiving beam alignment method synchronized with the beam scanner is used. The measurable range of 12 km with the fast beam scanning of 20 deg/s in the case of 8 Hz line-of-sight (LOS) update rate was demonstrated with the compensation. This demonstration shows the potential for the wind sensing CDL to satisfy the all requirements of long-range, real-time, and fast beam scanning measurement.
- 17 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-10
Evidence of Decreased Heterodyne-Detection Efficiency Caused by Fast Beam Scanning in Wind Sensing Coherent Doppler Lidar, and Demonstration on Recovery of the Efficiency With Lag-Angle Compensation
The experimental evidence of the decreased heterodyne-detection efficiency caused by the lag-angle is shown using a long-range wind sensing coherent Doppler lidar (CDL) with fast beam scanning. The recovery of the efficiency with the lag-angle compensation is also demonstrated. The receiving beam alignment method synchronized with the beam scanner is used. The measurable range of 12 km with the fast beam scanning of 20 deg/s in the case of 8 Hz line-of-sight (LOS) update rate was demonstrated with the compensation. This demonstration shows the potential for the wind sensing CDL to satisfy the all requirements of long-range, real-time, and fast beam scanning measurement.
- 20 May 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (11) , 20038-20062
Intelligent and compact coherent Doppler lidar with fiber-based configuration for robust wind sensing in various atmospheric and environmental conditions
The intelligent and compact coherent Doppler lidar (CDL) for wind sensing is demonstrated. The configuration is fiber-based. Several functions for the robust wind sensing in various atmospheric and environmental conditions are shown. The main feature of this CDL is the intelligent functions of the beam focusing, spectral accumulation, and window wiping. The supplemental functions of the robust noise floor reduction and motion compensation are also introduced. The effect of the above-mentioned main feature is demonstrated for the improvement of data availability. The evaluation results of the highly accurate wind velocity measurement are additionally shown.
- 20 May 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (11) , 20038-20062
Intelligent and compact coherent Doppler lidar with fiber-based configuration for robust wind sensing in various atmospheric and environmental conditions
The intelligent and compact coherent Doppler lidar (CDL) for wind sensing is demonstrated. The configuration is fiber-based. Several functions for the robust wind sensing in various atmospheric and environmental conditions are shown. The main feature of this CDL is the intelligent functions of the beam focusing, spectral accumulation, and window wiping. The supplemental functions of the robust noise floor reduction and motion compensation are also introduced. The effect of the above-mentioned main feature is demonstrated for the improvement of data availability. The evaluation results of the highly accurate wind velocity measurement are additionally shown.