MEMartin Ehrhardt

Martin Ehrhardt

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Martin Ehrhardt has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Transfer of photolithographic patterns by excimer laser ablation of polymers

    by Klaus Zimmer, Joachim Zajadacz, Martin Ehrhardt, Pierre Lorenz, Tamás Smausz, Béla Hopp


  • Open Access

    Development platform for UV-NIL processes using polymer masters produced by laser ablation and photolithography

    by Joachim Zajadacz, Pierre Lorenz, Martin Ehrhardt, Klaus Zimmer

    Ultraviolet nanoimprint lithography (UV-NIL) is a versatile and cost-effective technique for the fabrication of micro- and nanostructures by copying master patterns in a planar or a roll-to-roll process through curing of a liquid UV-sensitive precursor. For applications with a high pattern complexity, new UV-NIL process chains must be specified. Master fabrication is a challenging part of the development and often cannot be accomplished using a single master fabrication technique. Therefore, an approach combining different patterning fabrication techniques is developed here for polymer masters using laser direct writing and photolithography. The polymer masters produced in this way are molded into inverse silicone stamps that are used for roll-to-roll replication into an acrylate formulation. To fit the required roller size for large-area UV-NIL, several submasters with micrometer-sized dot and line gratings and prism arrays, which have been patterned by these different techniques, are assembled to final size of ∼200 × 600 mm2 with an absolute precision of better than 50 µm. The size of the submasters allows the use of standard laboratory equipment for patterning and direct writing, thus enabling the fabrication of micro- and even nanostructures when electron-beam writing is utilized. In this way, the effort, time, and costs for the fabrication of masters for UV-NIL processes are reduced, enabling further development for particular structures and applications. Using this approach, patterns fabricated with different laboratory tools are finally replicated by UV-NIL in an acrylate formulation, demonstrating the high quality of the whole process chain.


  • Open Access

    Transfer of micron pattern with reactive atmospheric plasma jets into fused silica

    by Martin Ehrhardt, Pierre Lorenz, Joachim Zajadacz, Robert Heinke, Thomas Arnold, Klaus Zimmer


  • Open Access

    Influence of Fluence and Pulse Number on Laser Cleaning of Atmospheric‐Pressure‐Plasma‐Jet‐Etched Optical Glasses

    by Robert Heinke, Thomas Arnold, Martin Ehrhardt, Pierre Lorenz, Klaus Zimmer

    The use of beam‐based technologies to process optical elements with nanoscale precision enables the fabrication of freeform surfaces. Especially, atmospheric pressure plasma jets (APPJ) have desirable properties such as atmospheric pressure machining, dry processing, and direct writing capabilities. However, the presence of metal oxides in optical glasses leads to the formation of nonvolatile reaction products during APPJ etching with fluorine‐containing gas mixtures, forming a residual layer that increases surface roughness and alters etching behavior. To prevent the formation of the residual layer, the APPJ process is combined with laser cleaning. For a possible future in situ cleaning of the residual layer during the plasma process, laser parameter ranges need to be found to remove the residual layer without damaging the glass surface. Therefore, planar etchings are performed by APPJ on N‐BK7 and Zerodur and the etched planes are subsequently laser irradiated with varying pulse numbers and fluences. The processed samples are then examined by scanning electron microscopy. For both N‐BK7 and Zerodur, a parameter range is identified that results in clean surfaces. The best machining results are achieved with 2–16 pulses and laser fluences of 0.6–1.2 J cm−2 for N‐BK7 and 0.56–0.7 J cm−2 for Zerodur.


  • Open Access

    Pulse duration dependent laser-induced plasma etching of polyimide using a high repetition rate laser

    by Visar Demiri, Martin Ehrhardt, Pierre Lorenz, Robert Heinke, Klaus Zimmer


  • Open Access

    Self-organized submicron structures in photoresist films by UV-laser irradiation at water-confined conditions

    by Martin Ehrhardt, Shengying Lai, Pierre Lorenz, Joachim Zajadacz, Bing Han, Klaus Zimmer

    A new kind of self-organized pattern formation process has been found during laser irradiation of polymer films in water confinement just below the laser ablation threshold, resulting in a randomly oriented pattern with a period of about 475 nm. The morphology, orientation, period, and amplitude of these patterns are inconsistent with both laser-induced periodic surface structures that typically consist of linear grooves with periods smaller the laser wavelength and wrinkling patterns that feature a much larger period and appear at layered systems. Excimer laser (λ = 248 nm, tp = 25 ns) exposure of 650 nm thick photoresist films on silicon wafers cause the growth of irregular submicron patterns. The pattern morphology that is examined with imaging techniques is correlated to processing parameters. The amplitude of these laser-induced self-organized (LISE) submicron structures are strengthened with pulse number and laser fluence. The experimental results are discussed together with simulations of laser heating the photoresist film in water confinement. The proposed pattern formation mechanism of such laser-induced self-organized submicron structures at temporal excitation of a confined polymer surface comprises the formation of an oriented roughness based on LIPSS that are developed to wrinkled structures due to the transient formation of a soft subsurface area that provides conditions for wrinkling of the water cooled, stiff polymer surface by laser-induced stress fields. Size, amplitude, and morphology of the LISE pattern provide good properties for applications in such fields as wetting, friction, optics, and bioactivity.


  • Open Access

    Influence of wavelength and accumulated fluence at picosecond laser-induced surface roughening of copper on secondary electron yield

    by Elena Bez, Marcel Himmerlich, Pierre Lorenz, Martin Ehrhardt, Aidan Graham Gunn, Stephan Pfeiffer, Martino Rimoldi, Mauro Taborelli, Klaus Zimmer, Paolo Chiggiato, et al.

    Ultrashort-pulse laser processing of copper is performed in air to reduce the secondary electron yield (SEY). By UV (355 nm), green (532 nm), and IR (1064 nm) laser-light induced surface modification, this study investigates the influence of the most relevant experimental parameters, such as laser power, scanning speed, and scanning line distance (represented as accumulated fluence) on the ablation depth, surface oxidation, topography, and ultimately on the SEY. Increasing the accumulated laser fluence results in a gradual change from a Cu2 O to a CuO-dominated surface with deeper micrometer trenches, higher density of redeposited surface particles from the plasma phase, and a reduced SEY. While the surface modifications are less pronounced for IR radiation at low accumulated fluence (<1000 J/cm2 ), analogous results are obtained for all wavelengths when reaching the nonlinear absorption regime, for which the SEY maximum converges to 0.7. Furthermore, independent of the extent of the structural transformations, an electron-induced surface conditioning at 250 eV allows a reduction of the SEY maximum below unity at doses of 5×10-4 C/mm2 . Consequently, optimization of processing parameters for application in particle accelerators can be obtained for a sufficiently low SEY at controlled ablation depth and surface particle density, which are factors that limit the surface impedance and the applicability of the material processing for ultrahigh vacuum systems. The relations between processing parameters and surface features will provide guidance in treating the surface of vacuum components, especially beam screens of selected magnets of the Large Hadron Collider or of future colliders.


  • Non‐damage deep etching of SiC by hybrid laser‐high temperature chemical processing

    by Xi Wang, Bing Han, Martin Ehrhardt, Fengyun Zhang, Jin Wang, Pingping Wang, Peter Pavol Monka, Shufeng Sun

    SiC is considered as preferred material for micro‐electro‐mechanical system in the future. The excellent mechanical property and chemical stability make it difficult to perform deep etching. The hybrid laser‐high temperature chemical etching is investigated to realize non‐damage deep etching of SiC. The influences of defocus, laser pulse interval, laser intensity, and pulse number on etching depth are researched. The optimized laser parameter for SiC non‐damage deep etching is laser intensity of 10 × 10 9 W/cm 2 with a pulse interval of 10 ms. In order to analyze the interaction mechanism, the temperature field and laser‐induced liquid jet in the liquid environment are calculated numerically. It is concluded that the material removal mechanism consists of laser heating vaporization during laser pulse, mechanical effect of laser‐induced liquid jet impact between two adjacent laser pulses and chemical etching in laser‐induced local high‐temperature environment. The chemical reaction between SiC and mixture of HF, and HNO 3 solution produces gases and fluosilicic acid and effectively reduces the roughness of the modified layer making the surface smoother, and also removes the microcracks on the side wall of the etched region.


  • Dynamics and 2D temperature distribution of plasma obtained by femtosecond laser-induced breakdown

    by Afaque M Hossain, Martin Ehrhardt, Martin Rudolph, Dmitry Kalanov, Pierre Lorenz, Klaus Zimmer, André Anders

    Recently, plasma produced by focusing femtosecond laser in gases has been introduced as an etching tool in materials processing. Proper control of the plasma in this application necessitates the apt understanding of the different morphological features of the plasma. In this contribution we show that, the plasma produced in air goes through several stages of morphological development–from ellipsoidal to spherical to toroidal plasma, whereas in argon, axial compression of an ellipsoidal plasma is observed. To explain this dissimilarity, we have quantified the temperature by emission spectroscopy (Planck analysis with Wien’s approximation). The evolution of temperature shows a triple exponential dependence in time which can be correlated with different stages of morphological changes of the plasma. Open Source Field Operation and Manipulation simulations using experimentally determined temperature values show that—(i) the reverse pressure gradient propagates radially inwards and compresses the plasma in both air and argon and forms a localized high pressure zone at the center that generates a secondary pressure wave in air, but not in argon, and (ii) the baroclinic torque that is generated because of the Richtmyer–Meshkov instability, dominates the rate of vorticity in air, whereas effects of flow compressibility and velocity gradients dominate the vortices in argon. Knowledge of the initial state and the dynamics of the subsequent stages of the plasma formation can be utilized for control and optimization of laser-induced plasma applications.