GMGennadii Martynenko

Gennadii Martynenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gennadii Martynenko has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    CREATION OF A COMPUTATIONAL MODEL OF BIRD STRIKE WITH TITANIUM OR METAL-MATRIX FAN BLADES OF A TURBO-FAN ENGINE

    by Volodymyr Martynenko, Gennadii Martynenko

    The relentless evolutionary trajectory of modern commercial aviation is driven by the simultaneous pursuit of efficiency and structural lightweighting. As gas turbine engine architectures transition toward ultra-high bypass ratios to minimize specific fuel consumption and acoustic noise, fan diameters inevitably increase. This triggers a «weight spiral» that challenges the specific strength limits of traditional monolithic titanium alloys. This work presents a comprehensive theoretical and computational investigation of the structural strength of titanium alloy blades, as well as a titanium-based metal-matrix composite reinforced with silicon carbide particles, proposing the latter as a superior alternative for next-generation fan blades. Addressing critical airworthiness requirements regarding bird strike resistance, a high-fidelity numerical model was developed. This model couples the smoothed particle hydrodynamics method for the bird impactor with an explicit nonlinear Lagrangian finite element analysis. The study introduces an advanced constitutive modeling strategy that synthesizes the Johnson-Cook viscoplastic model with anisotropic damage evolution laws, calibrated for the quasi-brittle fracture mechanics characteristic of particle-reinforced composites. Furthermore, this work directly integrates advanced computational methodologies, including equivalent dynamic loading for rapid parametric sizing and algorithmic dynamic relaxation for damping spurious oscillations, to enhance the accuracy of stress-strain state initialization in rotating components. The results demonstrate that the calculation model suits the strength of titanium-based metal-matrix composite blades of the turbofan jet engine.

  • Open Access

    MATHEMATICAL MODELING AND COMPUTER SIMULATION OF NONLINEAR DYNAMICS PHENOMENA IN A COMPLEX PASSIVE-ACTIVE VIBRATION-DAMPING AND VIBRATION-ISOLATING MAGNETIC SUPPORT WITH A SWIVELING OR ROTATING VERTICAL ROD-SHAFT

    by Gennadii Martynenko

    The article discusses specialized original computer software designed for calculating and analyzing the dynamics parameters of the rod-shaft in a vibration-damping and vibration-isolating complex fully magnetic support of the passive-active type, accounting for various types of magnetic elements. The object of the study is the dynamics of the rod-shaft, where a vibration-isolated real weight can be positioned either at the top or bottom. The primary goal is the modeling and visualization of nonlinear dynamics phenomena of this rod-shaft, considering the possibility of its swiveling or rotation, as well as the coupling of electromagnetic and mechanical controlled processes. The presentation of results in graphical and textual formats is adapted for determining dynamic characteristics and evaluating motion stability in non-resonant, near-resonant, resonant, and operational vibration-isolated or vibration-damping modes. The mathematical description utilizes an analytical model based on Lagrange-Maxwell differential equations in a form similar to Routh’s equations in mechanics. This approach accounts for the nonlinear force and stiffness characteristics of both radial passive magnetic support elements and the axial controlled electromagnetic support element, depending on its parameters and the control system parameters. The implementation of computer modeling and visualization of the rod-shaft nonlinear dynamics phenomena in a magnetic field was carried out using a computer mathematics system in the form of a nonlinear simulation-computational model of the dynamics of a vibration-damping and vibration-isolating complex passive-active magnetic support (SCM-DVDVIMS-N). This simulation model enables the generation of vibrograms, spectrograms, motion trajectories, phase portraits, and stroboscopic Poincaré sections, as well as three-dimensional spectra, frequency response characteristics, and dependencies of sub- and superharmonic amplitudes on the rotation speed and/or dynamic excitation for selected points of the rod-shaft. Verification of SCM-DVVMS-N was performed by comparing simulation results with experimental data obtained from a laboratory prototype of the vibration-damping and vibration-isolating complex passive-active magnetic support.

  • Open Access

    The concept of vibration-damping and vibration-isolating complex passive-active magnetic support based on a complete magnetic-electromagnetic suspension of a vertical rod-shaft

    by Gennadii Martynenko

    The article considers the issues of conceptual design of a complex vibration-damping and vibration-isolation fully magnetic support of a passive-active type. The project of this support is based on a complete combined magnetic-electromagnetic suspension of a small-sized rotor with control elements. This suspension is practically implemented in the form of a laboratory-experimental rig with radial passive magnetic bearings made of ring rare-earth permanent magnets and with an axial controlled electromagnetic thrust bearing with armored-type cores located in a mirror-like manner relative to the movable disk in the axial direction. The vibration damping characteristics of this axial bearing can be varied by changing the active resistances in the electromagnet circuits or by implementing pre-defined control algorithms when increased vibrations occur. Its vibration-isolation properties can be achieved by creating quasi-zero stiffness sections on the force characteristics, which is ensured by the choice of the control law. To prove this possibility, the search for such force and stiffness characteristics in the work was carried out using numerical mathematical modeling. It has been demonstrated that, due to the use of a corresponding law for controlling power electromagnets in the disk axial position control system, this electromechanical support allows for the required vibration-damping and vibration-isolation characteristics to be provided. It is conceptually shown that in the case of a vertical shaft arrangement, this magnetic suspension can be considered as a whole as a passive-active vibration-damping and vibration-isolation complex support for either a load located above or a body suspended below. The rotor can then be considered as a non-rotating rod-shaft that holds the vibration-isolated load. The possibilities of numerical determination of the required force and stiffness characteristics depending on the parameters of the axial electromagnetic support and control system are investigated. The distinctive features of the numerical algorithm used to solve the problem are shown, with an analysis of their influence on the accuracy of the simulation. The results of the analyses and their verification are presented. Thus, the possibility of using a complete magnetic-electromagnetic suspension of a model rotor as a whole as a vibration-damping and vibration-isolation complex fully magnetic support of a passive-active type has been conceptually confirmed. With a relatively large mass and dimensions of the vibration-insulated object, it is possible to use several such complex supports in a coordinated combination by introducing cross-connections into the control system of the axial electromagnetic support elements. With a relatively large mass and dimensions of the vibration- isolated object, it is possible to use several such complex supports in a coordinated combination by introducing cross-connections into the control system of the axial electromagnetic supporting elements.


  • Open Access

    APPLICATION OF ARTIFICIAL INTELLIGENCE METHODS TO PREDICT THE ULTIMATE STATIC LOAD OF A BEAM MADE OF HOMOGENEOUS MATERIAL ACCORDING TO THE VON MISES CRITERION BASED ON THE DATA OF STRUCTURAL STRENGTH ANALYSIS

    by Gennadii Martynenko, Vladyslav Harkusha

    The subject of the study is static structural analysis in mechanics. The aim of the work is to create and train an artificial intelligence model in the form of neural networks to predict the ultimate load on a structural element such as a beam made of a homogeneous material. The strength state of this structural element is determined by equivalent stresses according to the von Mises criterion. The initial and variable parameters are the geometric dimensions and power loads acting on the body. Achieving the goal makes it possible to calculate the strength of a structural element faster in terms of computation and with acceptable error values compared to classical methods of mechanics using numerical methods, in particular the finite element method. To achieve this goal, the following tasks are solved: conducting numerical experiments to analyze the strength state under static loading of a beam structural element using the finite element method; determining the key parameters of the body; preparing and aggregating data for the model; designing and training the model. Numerical experiments were carried out with predefined types of fixings and loads on the beam. There were 3 variations of data preparation and, accordingly, models to ensure the representativeness of predictions by neural networks. All numerical experiments were conducted in computer aided design systems. All numerical experiments were conducted in computer aided design systems. The design of the models was based on the principle of a minimal but sufficient number of hidden network layers and neurons in them. The model was trained on the principle of learning with a teacher, where a certain number of geometric properties and the pressure resisted by the body were selected as input parameters, and the maximum equivalent stress according to the von Mises criterion corresponding to these parameters was selected as an output parameter. These stress values are obtained as a result of analyzes in the computer aided design system. Prediction of the same values for other parameters of the object of study using neural networks is based on a linear regression algorithm and a certain number of input parameters. The models were optimized using the adaptive moment estimation algorithm. The model prediction error was calculated using the mean square error. The result of the study is the creation and training of artificial intelligence models and verification of their ability to predict the maximum equivalent stresses according to the von Mises criterion based on the geometric and force characteristics of a structural element with relative accuracy to a similar calculation in computer aided design systems. The analysis of the obtained results made it possible to prove the possibility of a reliable prediction of the desired maximum values of equivalent stresses characterizing the strength state of the considered structural element at different ratios of geometric and force parameters, without performing strength analysis by traditional methods. This expands the possibilities of finding rational design options.


  • Experimental Analysis and Modification of the Rotor System with Passive and Active Magnetic Bearings to Improve its Dynamic Characteristics

    by Gennadii Martynenko, Volodymyr Martynenko

    The paper discusses a laboratory operating model of a rotor in full magnetic suspension. It is considered as a prototype for small and medium-sized energy machines. The suspension is implemented using two radial passive magnetic bearings made of ring permanent magnets and one axial active magnetic bearing with double-sided stator armored cores of power electromagnets and a control system to create the necessary stabilizing forces depending on the current state (rotor position, and, as an option, rotor speed, as well as currents in the windings). To measure and analyze the dynamic characteristics of this rotor system, a developed specialized software and hardware complex is used. The use of this complex made it possible to determine the vibration amplitudes of the rotor support sections and the trajectories of their motion at various rotational speeds in the range from 0 to 3000 rpm. The results are presented in the form of three-dimensional spectrograms and amplitude-frequency characteristics for each degree of freedom of the rigid rotor, namely the radial displacements of the centers of two radial support sections of the rotor in two orthogonal directions (horizontal and vertical) and the center of the axial support section in the axial direction. The analysis of these data allowed identifying and generalizing the linear and nonlinear phenomena of rotor dynamics in the considered system with passive and active magnetic bearings. This gives an idea of the possible critical modes in systems of this type, and ways to suppress them to avoid resonances in the operating speed ranges or reduce the amplitudes of resonant vibrations. For the laboratory rig, a design modification option was proposed, which made it possible to improve the dynamic characteristics with a decrease in the range of nonlinear vibrations when the rotor moves in the form of cylindrical and conical precession.