Shuaitai Zhang

The GF-7 satellite is China’s first civil sub-meter resolution stereo mapping satellite, aiming at 1:10,000-scale mapping. To achieve this goal, apart from the stereo optical cameras that reach sub-meter resolution, the GF-7 satellite is equipped with a laser altimetry system capable of obtaining three-dimensional laser points (LPs) with high elevation accuracy. However, the combination of laser altimetry data and optical stereo images has not been thoroughly studied. In this paper, we exploit the images recorded by the highly integrated laser footprint cameras and propose a hierarchical phase correlation method based on a geographic pyramid for the registration of laser altimetry data and high-resolution optical stereo images, which lays a solid foundation for the following combined adjustment. Experiments show that the proposed registration method can automatically locate the LPs on high-resolution stereo images and meet the requirements of bundle adjustment. A series of bundle adjustment experiments were carried out, showing that laser altimetry data can significantly enhance the vertical accuracy of optical image stereo mapping and that elevation accuracy can reach roughly 1.0 m (RSME) without ground control points. Therefore, this study could be a good guide for global high-precision DSM acquisition with the GF-7 satellite.

Satellite laser altimetry can obtain sub-meter or even centimeter-scale surface elevation data over large areas, but it is inevitably affected by scattering caused by clouds, aerosols, and other atmospheric particles. This laser ranging error caused by scattering cannot be ignored. In this study, we systematically combined existing atmospheric scattering identification technology used in satellite laser altimetry and observed that the traditional algorithm cannot effectively estimate the laser multiple scattering of the GaoFen-7 (GF-7) satellite. To solve this problem, we used data from the GF-7 satellite to analyze the importance of atmospheric scattering and propose an identification scheme for atmospheric scattering data over land and water areas. We also used a look-up table and a multi-layer perceptron (MLP) model to identify and correct atmospheric scattering, for which the availability of land and water data reached 16.67% and 26.09%, respectively. After correction using the MLP model, the availability of land and water data increased to 21% and 30%, respectively. These corrections mitigated the low identification accuracy due to atmospheric scattering, which is significant for facilitating satellite laser altimetry data processing.