Lars Ewenz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lars Ewenz has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- André Till Zeuner
Institute of Materials Science, Technische Universität Dresden, 01069 Dresden, Germany
1 shared publication Ch. R. Bielak
Laboratory for Material and Joining Technology, Paderborn University, Paderborn, Germany
1 shared publicationG. Meschut
Laboratory for Material and Joining Technology, Paderborn University, Paderborn, Germany
1 shared publication- Jan Kalich
Institute of Manufacturing Science and Engineering, Technische Universität Dresden, 01062 Dresden, Germany
1 shared publication M. Bobbert
Laboratory for Material and Joining Technology, Paderborn University, Paderborn, Germany
1 shared publicationM. Otroshi
Laboratory for Material and Joining Technology, Paderborn University, Paderborn, Germany
1 shared publication
Latest Publications
- Open Access
The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints
Clinching is the manufacturing process of joining two or more metal sheets under high plastic deformation by form and force closure without thermal support and auxiliary parts. Clinch connections are applicable to difficult-to-join hybrid material combinations, such as steel and aluminum. Therefore, this technology is interesting for the application of AISI 304 components, as this material is widely used as a highly formable sheet material. A characteristic feature of AISI 304 is its metastability, i.e., the face-centered cubic (fcc) γ-austenite can transform into a significantly stronger body-centered cubic (bcc) α’-martensite under plastic deformation. This work investigates the effect of heat treatment—a process that involves the formation of an oxidation layer on the sheet surface—on the forming process during joining and the resulting mechanical properties of clinch joints made from AISI 304. For this purpose, different joints made from non-heat treated and heat-treated sheets were examined using classical metallography and advanced SEM techniques, accompanied by further investigations, such as hardness and feritscope measurements. The shear tensile strength was determined, and the fracture behavior of the samples was investigated. Clear influences of heat-treatment-induced surface roughness on the joint geometry and strength were observed.
Open AccessThe Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints
Clinching is the manufacturing process of joining two or more metal sheets under high plastic deformation by form and force closure without thermal support and auxiliary parts. Clinch connections are applicable to difficult-to-join hybrid material combinations, such as steel and aluminum. Therefore, this technology is interesting for the application of AISI 304 components, as this material is widely used as a highly formable sheet material. A characteristic feature of AISI 304 is its metastability, i.e., the face-centered cubic (fcc) γ-austenite can transform into a significantly stronger body-centered cubic (bcc) α’-martensite under plastic deformation. This work investigates the effect of heat treatment—a process that involves the formation of an oxidation layer on the sheet surface—on the forming process during joining and the resulting mechanical properties of clinch joints made from AISI 304. For this purpose, different joints made from non-heat treated and heat-treated sheets were examined using classical metallography and advanced SEM techniques, accompanied by further investigations, such as hardness and feritscope measurements. The shear tensile strength was determined, and the fracture behavior of the samples was investigated. Clear influences of heat-treatment-induced surface roughness on the joint geometry and strength were observed.
- Open Access
- 19 March 2022
- Published by Springer Nature in Production Engineering
- Vol. 16 (2-3) , 305-313
Numerical and experimental identification of fatigue crack initiation sites in clinched joints
In this paper, a study based on experimental and numerical simulations is performed to analyze fatigue cracks in clinched joints. An experimental investigation is conducted to determine the failure modes of clinched joints under cyclic loading at different load amplitudes with single-lap shear tests. In addition, numerical FEM simulations of clinching process and subsequent shear loading are performed to support the experimental investigations by analyzing the state of stresses at the location of failure. An attempt is made to explain the location of crack initiation in the experiments using evaluation variables such as contact shear stress and maximum principal stress.
- 19 March 2022
- Published by Springer Nature in Production Engineering
- Vol. 16 (2-3) , 305-313
Open AccessNumerical and experimental identification of fatigue crack initiation sites in clinched joints
In this paper, a study based on experimental and numerical simulations is performed to analyze fatigue cracks in clinched joints. An experimental investigation is conducted to determine the failure modes of clinched joints under cyclic loading at different load amplitudes with single-lap shear tests. In addition, numerical FEM simulations of clinching process and subsequent shear loading are performed to support the experimental investigations by analyzing the state of stresses at the location of failure. An attempt is made to explain the location of crack initiation in the experiments using evaluation variables such as contact shear stress and maximum principal stress.