Dezhi Zou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dezhi Zou has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Xinpeng Huang
Harbin Institute of Technology, Harbin, Heilongjiang Province, China
3 shared publications Cheng Sun
2 shared publicationsChenghu Zhang
Harbin Institute of Technology, Harbin, Heilongjiang Province, China
2 shared publications- Denghui Gao
Architecture College, Inner Mongolia University of Technology, Hohhot 010051, China
2 shared publications Yaling Wu
Harbin Institute of Technology, Harbin, Heilongjiang Province, China
2 shared publications- Cheng Sun
School of Architecture and Design, Harbin Institute of Technology, Harbin, China
1 shared publication
Latest Publications
- Open Access
- 15 November 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (22) , 10230
Research on Short-Term Energy Consumption Forecasting for Cold Regions Based on the TCN–Transformer Model
Energy consumption accounts for a significant proportion of China’s building operations, exhibiting notable regional variations influenced by geographic characteristics. Factors affecting building energy consumption during transitional seasons are particularly complex in severely cold regions. This study selected a university library in Hohhot, Inner Mongolia Autonomous Region, as its research subject, employing a hybrid TCN–transformer model to conduct predictive experiments on short-term building energy consumption. We first collected environmental data from Hohhot’s spring–summer transitional period. Following parameter screening and preprocessing, this dataset was input into the TCN–transformer model. By integrating TCN with transformer’s self-attention mechanism, the model addresses the region’s high noise levels and non-stationarity, enabling precise forecasting. To validate the effectiveness of the proposed model, a comparative analysis was conducted against traditional models, namely SVR and LSTM, on the same dataset. The results demonstrated that TCN–transformer achieves superior comprehensive performance, evidenced by a higher prediction accuracy (R2 = 0.8765) and lower error (MAE = 0.24603, RMSE = 0.32829), outperforming the baseline models. This research provides an innovative and efficient hybrid modelling approach and technical methodology for predicting building energy consumption during transitional seasons in severely cold regions, holding positive implications for enhancing building energy efficiency and promoting sustainable development.
- 15 November 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (22) , 10230
Open AccessResearch on Short-Term Energy Consumption Forecasting for Cold Regions Based on the TCN–Transformer Model
Energy consumption accounts for a significant proportion of China’s building operations, exhibiting notable regional variations influenced by geographic characteristics. Factors affecting building energy consumption during transitional seasons are particularly complex in severely cold regions. This study selected a university library in Hohhot, Inner Mongolia Autonomous Region, as its research subject, employing a hybrid TCN–transformer model to conduct predictive experiments on short-term building energy consumption. We first collected environmental data from Hohhot’s spring–summer transitional period. Following parameter screening and preprocessing, this dataset was input into the TCN–transformer model. By integrating TCN with transformer’s self-attention mechanism, the model addresses the region’s high noise levels and non-stationarity, enabling precise forecasting. To validate the effectiveness of the proposed model, a comparative analysis was conducted against traditional models, namely SVR and LSTM, on the same dataset. The results demonstrated that TCN–transformer achieves superior comprehensive performance, evidenced by a higher prediction accuracy (R2 = 0.8765) and lower error (MAE = 0.24603, RMSE = 0.32829), outperforming the baseline models. This research provides an innovative and efficient hybrid modelling approach and technical methodology for predicting building energy consumption during transitional seasons in severely cold regions, holding positive implications for enhancing building energy efficiency and promoting sustainable development.
- Open Access
A Study on the Thermal and Moisture Transfer Characteristics of Prefabricated Building Wall Joints in the Inner Mongolia Region
Prefabricated components inevitably generate numerous assembly joints during installation, with each 1 mm increase in joint width correlating to a 15–20% elevation in the annual occurrence frequency of the frost formation risk. In the Inner Mongolia Region, the water migration at wall connection interfaces during winter significantly exacerbates freeze–thaw damage due to persistent thermal gradients. A coupled heat–moisture transfer model incorporating gas–liquid–solid phase transitions was developed, with the liquid moisture content and temperature gradient as dual driving forces. A validation against internationally recognized BS EN 15026:2007 benchmark cases confirmed the model robustness. The prefabricated sandwich insulation walls reconstructed with region-specific volcanic ash materials underwent a comparative evaluation of temperature and relative humidity distributions under varied winter conditions. Furthermore, we analyze and assess the potential for freezing at connection points and identify the specific areas at risk. Synergistic effects between assembly gaps and indoor–outdoor environmental interactions on wall performance degradation were systematically assessed. The results indicated that, across all working conditions, both the temperature and relative humidity at each wall measurement point underwent periodic variations influenced by the outdoor environment. These fluctuations decreased in amplitude from the exterior to the interior, accompanied by a noticeable delay effect. Specifically, at Section 2, the wall temperatures at points B2–B8 were higher compared to those at A2–A8 of Section 1. The relative humidity gradient remained relatively stable at each measurement point, while the temperature fluctuation amplitude was smaller by 2.58 ± 0.3 °C compared to Section 1. Under subfreezing conditions, Section 1 demonstrates a marked reduction in relative humidity (Cases 1-3 and 2-3) compared to reference cases, which is indicative of internal ice crystallization. Conversely, Section 2 maintains higher relative humidity values under identical therma. These findings suggest that prefabricated building joints significantly impact indoor and outdoor wall temperatures, potentially increasing the indoor heat loss and accelerating temperature transfer during winter.
Open AccessA Study on the Thermal and Moisture Transfer Characteristics of Prefabricated Building Wall Joints in the Inner Mongolia Region
Prefabricated components inevitably generate numerous assembly joints during installation, with each 1 mm increase in joint width correlating to a 15–20% elevation in the annual occurrence frequency of the frost formation risk. In the Inner Mongolia Region, the water migration at wall connection interfaces during winter significantly exacerbates freeze–thaw damage due to persistent thermal gradients. A coupled heat–moisture transfer model incorporating gas–liquid–solid phase transitions was developed, with the liquid moisture content and temperature gradient as dual driving forces. A validation against internationally recognized BS EN 15026:2007 benchmark cases confirmed the model robustness. The prefabricated sandwich insulation walls reconstructed with region-specific volcanic ash materials underwent a comparative evaluation of temperature and relative humidity distributions under varied winter conditions. Furthermore, we analyze and assess the potential for freezing at connection points and identify the specific areas at risk. Synergistic effects between assembly gaps and indoor–outdoor environmental interactions on wall performance degradation were systematically assessed. The results indicated that, across all working conditions, both the temperature and relative humidity at each wall measurement point underwent periodic variations influenced by the outdoor environment. These fluctuations decreased in amplitude from the exterior to the interior, accompanied by a noticeable delay effect. Specifically, at Section 2, the wall temperatures at points B2–B8 were higher compared to those at A2–A8 of Section 1. The relative humidity gradient remained relatively stable at each measurement point, while the temperature fluctuation amplitude was smaller by 2.58 ± 0.3 °C compared to Section 1. Under subfreezing conditions, Section 1 demonstrates a marked reduction in relative humidity (Cases 1-3 and 2-3) compared to reference cases, which is indicative of internal ice crystallization. Conversely, Section 2 maintains higher relative humidity values under identical therma. These findings suggest that prefabricated building joints significantly impact indoor and outdoor wall temperatures, potentially increasing the indoor heat loss and accelerating temperature transfer during winter.
- Open Access
Multi-Objective Optimization-Driven Research on Rural Residential Building Design in Inner Mongolia Region
According to the China Building Energy Consumption and Carbon Emissions Research Report (2023), the construction industry accounts for 36.3% of total societal energy consumption, with residential buildings contributing significantly due to their extensive coverage and high operational frequency. Addressing energy efficiency and carbon reduction in this sector is critical for achieving national sustainability goals. This study proposes an optimization methodology for rural dwellings in Inner Mongolia, focusing on reducing energy demand while enhancing indoor thermal comfort and daylight performance. A parametric model was developed using Grasshopper, with energy consumption, thermal comfort (PPD), and Useful Daylight Illuminance (UDI) simulated through Ladybug and Honeybee tools. Key parameters analyzed include building morphology, envelope structures, and indoor thermal environments, followed by systematic optimization of building components. To refine multi-objective inputs, a specialized wall database was established, enabling categorization and dynamic visualization of material properties and construction methods. Comparative analysis demonstrated a 22.56% reduction in energy consumption, 19.26% decrease in occupant thermal dissatisfaction (PPD), and 25.44% improvement in UDI values post-optimization. The proposed framework provides a scientifically validated approach for improving energy efficiency and environmental adaptability in cold-climate rural architecture.
Open AccessMulti-Objective Optimization-Driven Research on Rural Residential Building Design in Inner Mongolia Region
According to the China Building Energy Consumption and Carbon Emissions Research Report (2023), the construction industry accounts for 36.3% of total societal energy consumption, with residential buildings contributing significantly due to their extensive coverage and high operational frequency. Addressing energy efficiency and carbon reduction in this sector is critical for achieving national sustainability goals. This study proposes an optimization methodology for rural dwellings in Inner Mongolia, focusing on reducing energy demand while enhancing indoor thermal comfort and daylight performance. A parametric model was developed using Grasshopper, with energy consumption, thermal comfort (PPD), and Useful Daylight Illuminance (UDI) simulated through Ladybug and Honeybee tools. Key parameters analyzed include building morphology, envelope structures, and indoor thermal environments, followed by systematic optimization of building components. To refine multi-objective inputs, a specialized wall database was established, enabling categorization and dynamic visualization of material properties and construction methods. Comparative analysis demonstrated a 22.56% reduction in energy consumption, 19.26% decrease in occupant thermal dissatisfaction (PPD), and 25.44% improvement in UDI values post-optimization. The proposed framework provides a scientifically validated approach for improving energy efficiency and environmental adaptability in cold-climate rural architecture.
- Open Access
- 30 April 2024
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 42 (2) , 520-528
The Impact of Architectural Layout on Urban Heat Island Effect: A Thermodynamic Perspective
- 30 April 2024
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 42 (2) , 520-528
Open AccessThe Impact of Architectural Layout on Urban Heat Island Effect: A Thermodynamic Perspective
- Open Access
- 24 April 2024
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 12, 1339058
Corrigendum: Study on hot air heating characteristics of greenhouse in cold region
Corrigendum: Study on hot air heating characteristics of greenhouse in cold region
- 24 April 2024
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 12, 1339058
Open AccessCorrigendum: Study on hot air heating characteristics of greenhouse in cold region
Corrigendum: Study on hot air heating characteristics of greenhouse in cold region
- Open Access
- 16 November 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (22) , 16029
A Comparative Analysis of Outdoor Thermal Comfort Indicators Applied in China and Other Countries
Outdoor thermal comfort is an important criterion for evaluating the quality of outdoor activity environments and is also a significant indicator for assessing sustainable building design. Over the past century, more than 165 indoor and outdoor thermal comfort indexes have been developed to define human thermal comfort conditions under various circumstances and to quantify indoor and outdoor thermal environmental conditions. However, in the process of outdoor thermal comfort indicators becoming widely used worldwide, it remains a pressing research issue to compare the current state of application in China and other countries, identify the key areas of application for both sides, and outline the trends in outdoor thermal comfort index application. This study analyzed 346 articles on outdoor thermal comfort indicators. Employing bibliometric methods, we outline the general landscape of outdoor thermal comfort index applications in China and other countries. Additionally, we utilize comparative analysis to uncover similarities and differences in the research focus on outdoor thermal comfort. The research findings indicate the following: (1) Compared to China, other countries started outdoor thermal comfort index application research earlier. Their papers have higher average citation counts and engage in close academic collaborations. However, the quantity of published papers is fewer than in China. (2) The top five frequently used indexes in both China and other countries are PET (including mPET), UTCI, PMV, SET* (including OUT_SET*), and THI (including DI). China tends to use PET and UTCI more frequently than other countries. (3) The potential future directions for outdoor thermal comfort index applications in both China and other countries include: “monitoring and controlling regional outdoor thermal comfort at the temporal and spatial scales”, “multi-factors coupling effects on outdoor thermal comfort”, “human health assessment and prediction based on outdoor thermal comfort”, and “utilizing computational algorithms to calculate outdoor thermal comfort”. This study can serve as a reference for researchers and designers in the industry, contributing to the creation of sustainable outdoor environments.
- 16 November 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (22) , 16029
Open AccessA Comparative Analysis of Outdoor Thermal Comfort Indicators Applied in China and Other Countries
Outdoor thermal comfort is an important criterion for evaluating the quality of outdoor activity environments and is also a significant indicator for assessing sustainable building design. Over the past century, more than 165 indoor and outdoor thermal comfort indexes have been developed to define human thermal comfort conditions under various circumstances and to quantify indoor and outdoor thermal environmental conditions. However, in the process of outdoor thermal comfort indicators becoming widely used worldwide, it remains a pressing research issue to compare the current state of application in China and other countries, identify the key areas of application for both sides, and outline the trends in outdoor thermal comfort index application. This study analyzed 346 articles on outdoor thermal comfort indicators. Employing bibliometric methods, we outline the general landscape of outdoor thermal comfort index applications in China and other countries. Additionally, we utilize comparative analysis to uncover similarities and differences in the research focus on outdoor thermal comfort. The research findings indicate the following: (1) Compared to China, other countries started outdoor thermal comfort index application research earlier. Their papers have higher average citation counts and engage in close academic collaborations. However, the quantity of published papers is fewer than in China. (2) The top five frequently used indexes in both China and other countries are PET (including mPET), UTCI, PMV, SET* (including OUT_SET*), and THI (including DI). China tends to use PET and UTCI more frequently than other countries. (3) The potential future directions for outdoor thermal comfort index applications in both China and other countries include: “monitoring and controlling regional outdoor thermal comfort at the temporal and spatial scales”, “multi-factors coupling effects on outdoor thermal comfort”, “human health assessment and prediction based on outdoor thermal comfort”, and “utilizing computational algorithms to calculate outdoor thermal comfort”. This study can serve as a reference for researchers and designers in the industry, contributing to the creation of sustainable outdoor environments.
- Open Access
- 16 March 2023
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 11
Study on hot air heating characteristics of greenhouse in cold region
Agriculture is the main industry in northeast China. As an important part of facility agriculture, agricultural greenhouses are playing a more and more important role. Due to geographical location, Northeast China is cold in winter, and the solar radiation energy is less, therefore, the large-span greenhouses commonly used in northeast China are prone to uneven temperature and insufficient heating. In this paper, in order to solve the phenomenon of uneven air flow field, humidity field and temperature field in greenhouse, based on AIRPAK simulation, four kinds of hot air heating return air modes, such as upper air supply and lower air return mode, lower air supply and upper air return mode, two-side air supply mode and left air supply and right air return mode, we explored the influence of temperature field, humidity field and air flow field in greenhouse. The results showed that the heat load of the greenhouse in winter is 161.51 kW, using two-side air supply mode is the best way. The air supply wind speed is 1.6 m/s, and the return wind speed is 3.1 m/s. The environment of the greenhouse can be maintained at about 15°C day and night, and the relative humidity is relatively uniform. In the crop growing area, the wind speed is between 0 m/s and 0.25 m/s. According to this research, suitable crops can be selected for reasonable planting and distribution in the greenhouse to maximize productivity.
- 16 March 2023
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 11
Open AccessStudy on hot air heating characteristics of greenhouse in cold region
Agriculture is the main industry in northeast China. As an important part of facility agriculture, agricultural greenhouses are playing a more and more important role. Due to geographical location, Northeast China is cold in winter, and the solar radiation energy is less, therefore, the large-span greenhouses commonly used in northeast China are prone to uneven temperature and insufficient heating. In this paper, in order to solve the phenomenon of uneven air flow field, humidity field and temperature field in greenhouse, based on AIRPAK simulation, four kinds of hot air heating return air modes, such as upper air supply and lower air return mode, lower air supply and upper air return mode, two-side air supply mode and left air supply and right air return mode, we explored the influence of temperature field, humidity field and air flow field in greenhouse. The results showed that the heat load of the greenhouse in winter is 161.51 kW, using two-side air supply mode is the best way. The air supply wind speed is 1.6 m/s, and the return wind speed is 3.1 m/s. The environment of the greenhouse can be maintained at about 15°C day and night, and the relative humidity is relatively uniform. In the crop growing area, the wind speed is between 0 m/s and 0.25 m/s. According to this research, suitable crops can be selected for reasonable planting and distribution in the greenhouse to maximize productivity.
- Open Access
Coal-Fired Boiler Flue Gas Desulfurization System Based on Slurry Waste Heat Recovery in Severe Cold Areas
To reduce operating costs on the basis of ensuring the desulfurization efficiency in a wet flue gas desulfurization system, a theoretical model was put forward, and a calculation method was set up. Correlations between reaction zone height, flue gas inlet temperature, slurry inlet temperature, gas–liquid ratio and desulfurization efficiency were found. Based on the heat and mass transfer model of the spray tower, the integrated system of desulfurization tower and open slurry pool and the flue gas desulfurization-waste heat recovery system were established. Additionally, the effect of outdoor wind speed, heat dissipation area and ambient temperature on the slurry equilibrium temperature in the integrated system were analyzed. The results show the slurry equilibrium temperature of the desulfurization system is negatively correlated with outdoor wind speed and heat dissipation area, and positively related to ambient temperature. The slurry temperature is the main factor that affects the performance of the wet flue gas desulfurization system. Finally, based on the Harbin heating group Hua Hui hotspot energy-saving reconstruction project, a case analysis was conducted, which proves the flue gas desulfurization-waste heat recovery system is profitable, energy saving and a suitable investment project.
Open AccessCoal-Fired Boiler Flue Gas Desulfurization System Based on Slurry Waste Heat Recovery in Severe Cold Areas
To reduce operating costs on the basis of ensuring the desulfurization efficiency in a wet flue gas desulfurization system, a theoretical model was put forward, and a calculation method was set up. Correlations between reaction zone height, flue gas inlet temperature, slurry inlet temperature, gas–liquid ratio and desulfurization efficiency were found. Based on the heat and mass transfer model of the spray tower, the integrated system of desulfurization tower and open slurry pool and the flue gas desulfurization-waste heat recovery system were established. Additionally, the effect of outdoor wind speed, heat dissipation area and ambient temperature on the slurry equilibrium temperature in the integrated system were analyzed. The results show the slurry equilibrium temperature of the desulfurization system is negatively correlated with outdoor wind speed and heat dissipation area, and positively related to ambient temperature. The slurry temperature is the main factor that affects the performance of the wet flue gas desulfurization system. Finally, based on the Harbin heating group Hua Hui hotspot energy-saving reconstruction project, a case analysis was conducted, which proves the flue gas desulfurization-waste heat recovery system is profitable, energy saving and a suitable investment project.
- 31 March 2020
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 38 (1) , 269-273
Analysis for Thermal Performance and Energy-Efficient Technology of Prefabricated Building Walls
- 31 March 2020
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 38 (1) , 269-273
Analysis for Thermal Performance and Energy-Efficient Technology of Prefabricated Building Walls