Stanislav Y. Bartashevsky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Stanislav Y. Bartashevsky has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandr Denyshchenko
Dnipro University of Technology Ukraine
2 shared publications - Artem M. Yerofieiev
VN Karazin Kharkiv Natl Univ MSE Ukraine, Kharkiv, Ukraine
1 shared publication Dmytro Kolosov
1 shared publication- Jamil Haddad
Department of Mechanical Engineering, Faculty of Engineering Technology, Al-Balqa Applied University, Amman, Jordan
1 shared publication - Leonid Shyrin1 shared publication
Mykola А. Kozar
NAS Ukraine, MP Semenenko Inst Geochem Mineral & Ore Format, Kiev, Ukraine
1 shared publication
Latest Publications
- Open Access
- 24 July 2023
- Published by Polish Academy of Sciences Chancellery in Archives of Mining Sciences
- Vol. 66 (4) , 579-594
Reducing Wear of the Mine Ropeways Components Basing Upon the Studies of Their Contact Interaction
Reducing WeaR of the Mine RopeWays coMponents Basing upon the studies of theiR contact inteRaction to improve the durability of the rollers of supporting and guiding devices as well as traction ropes of ropeway facilities based upon the analysis of their contact interaction. theoretical studies of a mathematical model of contact interaction of mine ropeway components to determine regularities of the formation of dynamic efforts within the contact area and experimental studies of the plant under mine conditions. Based upon a mathematical model, contact stresses within the zone of contact of traction rope with guiding rollers and drive sheaves of mine ropeways under real operating conditions have been determined. the obtained results are validated experimentally under mine conditions. innovative patent-protected design solutions have been proposed; the solutions make it possible to considerably increase the durability of the ropeway components. it has been determined that methods of surface increase in the strengthening of a roller working surface do not have proper effect as the strengthened layer on a soft base cracks and delaminates due to high contact loads; maximum angle of rope bending on rollers of supporting devices (6º-in operation manual; 15º-in safety rules) recommended for GrW is overstated. it shouldn't be more than 1.5º in terms of values of contact stresses for standard plants; development of prestressed compression state in the material of elastic lining of a drive friction sheave allows increasing considerably (by two times and more) its service life. ropes with reduced diameters of external layer wires (Ukraine's regulatory document-dSt 2688) being used currently on mine ropeways do not meet the operating conditions and have a short period of service life due to their corrosive and fatigue breaking. to lengthen the service life of GrW traction ropes, it is required to change for the ropes with increased diameters of the external layer wires with preliminarily clamped strands.
- 24 July 2023
- Published by Polish Academy of Sciences Chancellery in Archives of Mining Sciences
- Vol. 66 (4) , 579-594
Open AccessReducing Wear of the Mine Ropeways Components Basing Upon the Studies of Their Contact Interaction
Reducing WeaR of the Mine RopeWays coMponents Basing upon the studies of theiR contact inteRaction to improve the durability of the rollers of supporting and guiding devices as well as traction ropes of ropeway facilities based upon the analysis of their contact interaction. theoretical studies of a mathematical model of contact interaction of mine ropeway components to determine regularities of the formation of dynamic efforts within the contact area and experimental studies of the plant under mine conditions. Based upon a mathematical model, contact stresses within the zone of contact of traction rope with guiding rollers and drive sheaves of mine ropeways under real operating conditions have been determined. the obtained results are validated experimentally under mine conditions. innovative patent-protected design solutions have been proposed; the solutions make it possible to considerably increase the durability of the ropeway components. it has been determined that methods of surface increase in the strengthening of a roller working surface do not have proper effect as the strengthened layer on a soft base cracks and delaminates due to high contact loads; maximum angle of rope bending on rollers of supporting devices (6º-in operation manual; 15º-in safety rules) recommended for GrW is overstated. it shouldn't be more than 1.5º in terms of values of contact stresses for standard plants; development of prestressed compression state in the material of elastic lining of a drive friction sheave allows increasing considerably (by two times and more) its service life. ropes with reduced diameters of external layer wires (Ukraine's regulatory document-dSt 2688) being used currently on mine ropeways do not meet the operating conditions and have a short period of service life due to their corrosive and fatigue breaking. to lengthen the service life of GrW traction ropes, it is required to change for the ropes with increased diameters of the external layer wires with preliminarily clamped strands.
- Open Access
- 1 January 2022
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Geology, Geography and Geoecology
- Vol. 31 (3) , 469-483
Classification of deposits of the Dnipro-Donetsk oil and gas region by the content of metals in oils
The issues considered in the paper bear a direct relation to the disputable geo-chemical problems of the origin of oil - one of the main sources of modern energy gen-eration. Features of metal distribution in oils have not been studied yet, and natural clas-sifications of oil fields of the Dnipro-Donets depression according to their contents have not been developed before. That stipulates the scientific novelty of the obtained results. Topicality and practical implications of the carried out studies are mainly in the fact the determined features of metal contents in oils and the classifications of deposits developed on their basis will favor the elaboration of a set of predictive criteria for industrial accumulations of hydrocarbons and scientific sub-stantiation of geological-economic, technological, and environmental estimation of their use. The objects of long-term studies include 36 oil fields: Bakhmatske; Prylutske; Krasnozaiarske; Kachalivske; Kremenivske; Karaikozovske; Korobochkynske; Kulychykhin-ske; Lipovodolynnske; Monastyrishchynske; Matlakhivske; Malosorochynske; Novomykolayivske; Perekopivske; Prokopenkivske; Radchenkovske; Raspashnovske; Sofiyivske; Sukhodolivske; Solontsivske; Solokhivske; Talalayivske; Trostianetske; Turutynske; Kharkovtsivske; Shchurynske; Yuryivske; Yaroshivske; Khukhrianske; Sahaidatske No 1; Sahaidatske No 13; Kybytsivske No 5; Ky-bytsivske No 51; Kybytsivske No 52; Kybytsivske No 56; and Kybytsivske No 1. They are located within the large tectonic structure of Eastern-European platform - Dnipro-Donets depression. The fields form the Dnipro-Donets oil and gas area of Ukraine. The paper is based on the results of studies of not less than 30 oil samples from each of the fields aimed at identification of metal content with the help of X-ray fluorescence analysis using energy-dispersion spectrometer 'Sprut >> SEF 01. Natural classification of oil fields in terms of content of each of the considered element have been developed basing on the results of cluster analyses implemented in terms of professional software platforms of versions STATISTICA 13.3 and IBM SPSS Statistics 22. The main scientific value of the obtained results is represented by the following: the development of natural classifications of oil fields of the Dnipro-Donets depression accord-ing to the results of cluster analysis of the content of metals, sulfur, and V/Ni ratio and substantiation of 5 new geochemical criteria for the division of fields formed by oils generated mostly by abiogenic or biogenic processes.
- 1 January 2022
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Geology, Geography and Geoecology
- Vol. 31 (3) , 469-483
Open AccessClassification of deposits of the Dnipro-Donetsk oil and gas region by the content of metals in oils
The issues considered in the paper bear a direct relation to the disputable geo-chemical problems of the origin of oil - one of the main sources of modern energy gen-eration. Features of metal distribution in oils have not been studied yet, and natural clas-sifications of oil fields of the Dnipro-Donets depression according to their contents have not been developed before. That stipulates the scientific novelty of the obtained results. Topicality and practical implications of the carried out studies are mainly in the fact the determined features of metal contents in oils and the classifications of deposits developed on their basis will favor the elaboration of a set of predictive criteria for industrial accumulations of hydrocarbons and scientific sub-stantiation of geological-economic, technological, and environmental estimation of their use. The objects of long-term studies include 36 oil fields: Bakhmatske; Prylutske; Krasnozaiarske; Kachalivske; Kremenivske; Karaikozovske; Korobochkynske; Kulychykhin-ske; Lipovodolynnske; Monastyrishchynske; Matlakhivske; Malosorochynske; Novomykolayivske; Perekopivske; Prokopenkivske; Radchenkovske; Raspashnovske; Sofiyivske; Sukhodolivske; Solontsivske; Solokhivske; Talalayivske; Trostianetske; Turutynske; Kharkovtsivske; Shchurynske; Yuryivske; Yaroshivske; Khukhrianske; Sahaidatske No 1; Sahaidatske No 13; Kybytsivske No 5; Ky-bytsivske No 51; Kybytsivske No 52; Kybytsivske No 56; and Kybytsivske No 1. They are located within the large tectonic structure of Eastern-European platform - Dnipro-Donets depression. The fields form the Dnipro-Donets oil and gas area of Ukraine. The paper is based on the results of studies of not less than 30 oil samples from each of the fields aimed at identification of metal content with the help of X-ray fluorescence analysis using energy-dispersion spectrometer 'Sprut >> SEF 01. Natural classification of oil fields in terms of content of each of the considered element have been developed basing on the results of cluster analyses implemented in terms of professional software platforms of versions STATISTICA 13.3 and IBM SPSS Statistics 22. The main scientific value of the obtained results is represented by the following: the development of natural classifications of oil fields of the Dnipro-Donets depression accord-ing to the results of cluster analysis of the content of metals, sulfur, and V/Ni ratio and substantiation of 5 new geochemical criteria for the division of fields formed by oils generated mostly by abiogenic or biogenic processes.
- 1 January 2021
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 6,p. 72-76
Improving the capacity of mine degassing pipelines
Purpose. To identify features of methane-air mixture flow within the steel degassing pipelines as well as within those ones made of composite materials, to develop engineering solutions improving their reliability for actual use. Methodology. To solve the problem of increasing the capacity of mine degassing pipelines, an analysis of fundamental studies on the physical and mechanical properties of mine methane and the processes of its recovery in a mine environment is conducted. Schemes of operating gas-transmission systems and peculiarities of functioning of zonal vacuum gas pipelines in the conditions of intensive removal of rocks of the bottom of underground workings and deformations of the massif are considered. Based on the results of expert assessment of production situations, potential reserves for enhancing the efficiency of in-mine gas pipelines have been determined. Reliability indicators of traditionally applied steel pipes and their analogues from composite materials used abroad are established, innovative technological and technical solutions for their construction at Ukrainian mines are recommended. Findings. According to the expert evaluation of the operation modes of mine degassing lines and analysis of the world practices to apply pipes made of composite materials for mining industry, an engineering solution concerning the improvement of operating degassing systems as well as their capacity has been substantiated. Originality. Innovative engineering solutions as for the modernization of the underground degassing systems, which allow increasing the capacity of mine pipelines, and provide maintaining of the quality the captured methane-air mixture in the process of its transportation from wells to vacuum pump stations, have been substantiated. Practical value. Implementation of the research results to decrease hydraulic resistance within the degassing mains as well as introduction of innovative engineering solutions for the construction of main degassing pipelines from long links of composite pipes with a minimum number of butt joints has been scheduled for Ukrainian mines dealing with the development of gassy coal seams.
- 1 January 2021
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 6,p. 72-76
Improving the capacity of mine degassing pipelines
Purpose. To identify features of methane-air mixture flow within the steel degassing pipelines as well as within those ones made of composite materials, to develop engineering solutions improving their reliability for actual use. Methodology. To solve the problem of increasing the capacity of mine degassing pipelines, an analysis of fundamental studies on the physical and mechanical properties of mine methane and the processes of its recovery in a mine environment is conducted. Schemes of operating gas-transmission systems and peculiarities of functioning of zonal vacuum gas pipelines in the conditions of intensive removal of rocks of the bottom of underground workings and deformations of the massif are considered. Based on the results of expert assessment of production situations, potential reserves for enhancing the efficiency of in-mine gas pipelines have been determined. Reliability indicators of traditionally applied steel pipes and their analogues from composite materials used abroad are established, innovative technological and technical solutions for their construction at Ukrainian mines are recommended. Findings. According to the expert evaluation of the operation modes of mine degassing lines and analysis of the world practices to apply pipes made of composite materials for mining industry, an engineering solution concerning the improvement of operating degassing systems as well as their capacity has been substantiated. Originality. Innovative engineering solutions as for the modernization of the underground degassing systems, which allow increasing the capacity of mine pipelines, and provide maintaining of the quality the captured methane-air mixture in the process of its transportation from wells to vacuum pump stations, have been substantiated. Practical value. Implementation of the research results to decrease hydraulic resistance within the degassing mains as well as introduction of innovative engineering solutions for the construction of main degassing pipelines from long links of composite pipes with a minimum number of butt joints has been scheduled for Ukrainian mines dealing with the development of gassy coal seams.