Shaikh Khaled Mostaque
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shaikh Khaled Mostaque has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Bipanko Kumar Mondal
Department of Electrical and Electronic Engineering, Begum Rokeya University, Rangpur, 5400, Bangladesh
4 shared publications - Jaker Hossain
Photonics & Advanced Materials Laboratory, Department of Electrical and Electronic Engineering, University of Rajshahi, Rajshahi, Bangladesh
4 shared publications - Bipin Saha
Solar Energy Laboratory, Department of Electrical and Electronic Engineering, University of Rajshahi 1 , Rajshahi 6205, Bangladesh
2 shared publications - Aditya Bhowmik1 shared publication
Alamin Hossain Pappu
Electrical and Electronic Engineering, University of Rajshahi, S. N. Bose Building Road, Rajshahi, Rajshahi, 6205, BANGLADESH
1 shared publication- Ariful Islam
Department of Biochemistry and Molecular Biology, University of Dhaka, Dhaka, Bangladesh
1 shared publication
Latest Publications
- Open Access
Bangladeshi Native Vehicle Detection in Wild
The success of autonomous navigation relies on robust and precise vehicle recognition, hindered by the scarcity of region-specific vehicle detection datasets, impeding the development of context-aware systems. To advance terrestrial object detection research, this paper proposes a native vehicle detection dataset for the most commonly appeared vehicle classes in Bangladesh. 17 distinct vehicle classes have been taken into account, with fully annotated 81542 instances of 17326 images. Each image width is set to at least 1280px. The dataset's average vehicle bounding box-to-image ratio is 4.7036. This Bangladesh Native Vehicle Dataset (BNVD) has accounted for several geographical, illumination, variety of vehicle sizes, and orientations to be more robust on surprised scenarios. In the context of examining the BNVD dataset, this work provides a thorough assessment with four successive You Only Look Once (YOLO) models, namely YOLO v5, v6, v7, and v8. These dataset's effectiveness is methodically evaluated and contrasted with other vehicle datasets already in use. The BNVD dataset exhibits mean average precision(mAP) at 50% intersection over union (IoU) is 0.848 corresponding precision and recall values of 0.841 and 0.774. The research findings indicate a mAP of 0.643 at an IoU range of 0.5 to 0.95. The experiments show that the BNVD dataset serves as a reliable representation of vehicle distribution and presents considerable complexities.
Open AccessBangladeshi Native Vehicle Detection in Wild
The success of autonomous navigation relies on robust and precise vehicle recognition, hindered by the scarcity of region-specific vehicle detection datasets, impeding the development of context-aware systems. To advance terrestrial object detection research, this paper proposes a native vehicle detection dataset for the most commonly appeared vehicle classes in Bangladesh. 17 distinct vehicle classes have been taken into account, with fully annotated 81542 instances of 17326 images. Each image width is set to at least 1280px. The dataset's average vehicle bounding box-to-image ratio is 4.7036. This Bangladesh Native Vehicle Dataset (BNVD) has accounted for several geographical, illumination, variety of vehicle sizes, and orientations to be more robust on surprised scenarios. In the context of examining the BNVD dataset, this work provides a thorough assessment with four successive You Only Look Once (YOLO) models, namely YOLO v5, v6, v7, and v8. These dataset's effectiveness is methodically evaluated and contrasted with other vehicle datasets already in use. The BNVD dataset exhibits mean average precision(mAP) at 50% intersection over union (IoU) is 0.848 corresponding precision and recall values of 0.841 and 0.774. The research findings indicate a mAP of 0.643 at an IoU range of 0.5 to 0.95. The experiments show that the BNVD dataset serves as a reliable representation of vehicle distribution and presents considerable complexities.
- Open Access
- 1 June 2023
- Published by IOP Publishing in Engineering Research Express
- Vol. 5 (2) , 025056
Design of a highly efficient n-CdS/p-AgGaTe2/p+-SnS double-heterojunction thin film solar cell
In this article, AgGaTe2-based n-CdS/p-AgGaTe2/p + -SnS double-heterojunction solar cells have been designed and explored utilizing a solar cell capacitance simulator (SCAPS-1D). This design manifested n-type CdS and p + -type SnS as window and back surface field (BSF) layer, respectively with the AgGaTe2 absorber. The major contributing parameters of these layers such as thickness, doping concentration level, and bulk flaws have been adjusted to reach the optimum computation. This introduced n-CdS/p-AgGaTe2/p + -SnS double-heterostructure solar cell demonstrates the significant power conversion efficiency (PCE) of 32.48% with the open circuit voltage, VOC of 0.96 V, short circuit current, JSC of 38.64 mA cm−2, and the Fill factor, FF of 87.31%. This remarkable efficiency is originated by the formation of a higher built-in potential at the p-AgGaTe2/p + -SnS heterostructure and a decrease in the surface recombination velocity brought on by the SnS BSF layer. This computational study demonstrates the potential of AgGaTe2 as an absorber and SnS as a BSF layer, and pave the way for the AgGaTe2-based experimental research in the era of solar cells.
- 1 June 2023
- Published by IOP Publishing in Engineering Research Express
- Vol. 5 (2) , 025056
Open AccessDesign of a highly efficient n-CdS/p-AgGaTe2/p+-SnS double-heterojunction thin film solar cell
In this article, AgGaTe2-based n-CdS/p-AgGaTe2/p + -SnS double-heterojunction solar cells have been designed and explored utilizing a solar cell capacitance simulator (SCAPS-1D). This design manifested n-type CdS and p + -type SnS as window and back surface field (BSF) layer, respectively with the AgGaTe2 absorber. The major contributing parameters of these layers such as thickness, doping concentration level, and bulk flaws have been adjusted to reach the optimum computation. This introduced n-CdS/p-AgGaTe2/p + -SnS double-heterostructure solar cell demonstrates the significant power conversion efficiency (PCE) of 32.48% with the open circuit voltage, VOC of 0.96 V, short circuit current, JSC of 38.64 mA cm−2, and the Fill factor, FF of 87.31%. This remarkable efficiency is originated by the formation of a higher built-in potential at the p-AgGaTe2/p + -SnS heterostructure and a decrease in the surface recombination velocity brought on by the SnS BSF layer. This computational study demonstrates the potential of AgGaTe2 as an absorber and SnS as a BSF layer, and pave the way for the AgGaTe2-based experimental research in the era of solar cells.
- Open Access
- 1 February 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025255
Numerical modeling of CuSbSe2-based dual-heterojunction thin film solar cell with CGS back surface layer
Ternary chalcostibite copper antimony selenide (CuSbSe2) can be a potential absorber for succeeding thin film solar cells due to its non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap, and high optical absorption coefficient. The power conversion efficiencies (PCEs) in conventional single heterojunction CuSbSe2 solar cells suffer from higher recombination rate at the interfaces and the presence of a Schottky barrier at the back contact. In this study, we propose a dual-heterojunction n-ZnSe/p-CuSbSe2/p+-copper gallium selenide (CGS) solar device, having CGS as the back surface field (BSF) layer. The BSF layer absorbs low energy (sub-bandgap) light through a tail-states-assisted upconversion technique, leading to enhanced conversion efficiency. Numerical simulations were run in Solar Cell Capacitance Simulator-1 dimensional software to examine how the performance of the proposed solar cell would respond under different conditions of absorber layer thickness, doping levels, and defect densities. The simulation results exhibit a PCE as high as 43.77% for the dual-heterojunction solar cell as compared to 27.74% for the single heterojunction n-ZnSe/p-CuSbSe2 counterpart, demonstrating the capability of approaching the detailed balance efficiency limit calculated by Shockley–Queisser.
- 1 February 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025255
Open AccessNumerical modeling of CuSbSe2-based dual-heterojunction thin film solar cell with CGS back surface layer
Ternary chalcostibite copper antimony selenide (CuSbSe2) can be a potential absorber for succeeding thin film solar cells due to its non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap, and high optical absorption coefficient. The power conversion efficiencies (PCEs) in conventional single heterojunction CuSbSe2 solar cells suffer from higher recombination rate at the interfaces and the presence of a Schottky barrier at the back contact. In this study, we propose a dual-heterojunction n-ZnSe/p-CuSbSe2/p+-copper gallium selenide (CGS) solar device, having CGS as the back surface field (BSF) layer. The BSF layer absorbs low energy (sub-bandgap) light through a tail-states-assisted upconversion technique, leading to enhanced conversion efficiency. Numerical simulations were run in Solar Cell Capacitance Simulator-1 dimensional software to examine how the performance of the proposed solar cell would respond under different conditions of absorber layer thickness, doping levels, and defect densities. The simulation results exhibit a PCE as high as 43.77% for the dual-heterojunction solar cell as compared to 27.74% for the single heterojunction n-ZnSe/p-CuSbSe2 counterpart, demonstrating the capability of approaching the detailed balance efficiency limit calculated by Shockley–Queisser.
- 9 December 2021
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 37 (1) , 015008
Computational investigation on the photovoltaic performance of an efficient GeSe-based dual-heterojunction thin film solar cell
This article reports the design and computational analysis of an efficient GeSe-based n-ZnSe/p-GeSe/p +-WSe2 dual-heterojunction (DH) thin film solar cell using SCAPS-1D simulation program with physical parameters from the literature. The device has been optimized considering the thickness, doping and defect density of each layer. The optimized device shows an efficiency of ∼42.18% with a short circuit current density, J SC of 47.84 mA cm−2, an open circuit voltage, V OC of 1.07 V and fill factor, FF of 82.80%, respectively that remains within the Shockley-Queisser limit of a DH solar cell. The raised built-in potential developed between the two interfaces of the devices produces a surpassing V OC. The higher J SC is attributed to the current generated by absorption of sub-band gap photons by a tail-states-assisted two-step photon upconversion mechanism in the WSe2 back surface field layer. These results indicate the potential of manufacturing the high efficiency GeSe-based DH solar cell in future.
- 9 December 2021
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 37 (1) , 015008
Computational investigation on the photovoltaic performance of an efficient GeSe-based dual-heterojunction thin film solar cell
This article reports the design and computational analysis of an efficient GeSe-based n-ZnSe/p-GeSe/p +-WSe2 dual-heterojunction (DH) thin film solar cell using SCAPS-1D simulation program with physical parameters from the literature. The device has been optimized considering the thickness, doping and defect density of each layer. The optimized device shows an efficiency of ∼42.18% with a short circuit current density, J SC of 47.84 mA cm−2, an open circuit voltage, V OC of 1.07 V and fill factor, FF of 82.80%, respectively that remains within the Shockley-Queisser limit of a DH solar cell. The raised built-in potential developed between the two interfaces of the devices produces a surpassing V OC. The higher J SC is attributed to the current generated by absorption of sub-band gap photons by a tail-states-assisted two-step photon upconversion mechanism in the WSe2 back surface field layer. These results indicate the potential of manufacturing the high efficiency GeSe-based DH solar cell in future.
- Open Access
- 13 April 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (23) , 13751-13762
Stress-induced phase-alteration in solution processed indium selenide thin films during annealing
This article demonstrates the successful synthesis of indium selenide thin films by a spin coating method in air using thiol-amine cosolvents. The synthesized films encountered a transformation from β-In3Se2 to γ-In2Se3 phase due to mechanical stress during annealing as confirmed from XRD and EDS analysis. The SEM study ensured the homogeneity and uniformity of surface morphology of both phases. The FTIR analysis also confirmed the In–Se stretching vibration bond for both β-In3Se2 and γ-In2Se3 thin films. The temperature dependent electrical conductivity indicated the semiconducting nature of both phases. The optical transmittance was found to increase with annealing temperatures for both phases. The optical band gaps were estimated to be in the range of 2.60–2.75 and 2.12–2.28 eV for β-In3Se2 and γ-In2Se3 phases, respectively consistent with the reported values. These results indicate that stress-induced phase transformation in solution-processed indium selenide could be useful in 2D optoelectronic devices in future.
- 13 April 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (23) , 13751-13762
Open AccessStress-induced phase-alteration in solution processed indium selenide thin films during annealing
This article demonstrates the successful synthesis of indium selenide thin films by a spin coating method in air using thiol-amine cosolvents. The synthesized films encountered a transformation from β-In3Se2 to γ-In2Se3 phase due to mechanical stress during annealing as confirmed from XRD and EDS analysis. The SEM study ensured the homogeneity and uniformity of surface morphology of both phases. The FTIR analysis also confirmed the In–Se stretching vibration bond for both β-In3Se2 and γ-In2Se3 thin films. The temperature dependent electrical conductivity indicated the semiconducting nature of both phases. The optical transmittance was found to increase with annealing temperatures for both phases. The optical band gaps were estimated to be in the range of 2.60–2.75 and 2.12–2.28 eV for β-In3Se2 and γ-In2Se3 phases, respectively consistent with the reported values. These results indicate that stress-induced phase transformation in solution-processed indium selenide could be useful in 2D optoelectronic devices in future.