Aleksei Maksimov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aleksei Maksimov has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Gennadiy A. Kutyrev
Kazan National Research Technological University, Kazan, Russia
8 shared publications - Marianna P. Kutyreva
A.M. Butlerov Chemical Institute, Kazan Federal University, 18 Kremlyovskaya Str., 420008 Kazan, Russia
4 shared publications - Alina Vagapova
Department of Polymers and Composite Materials Processing Technology, Kazan National Research Technological University, Kazan, Russia
3 shared publications Gennadii Kutyrev
Kazan National Research Technological University, Kazan, Russia
3 shared publications- Kharlampii Kharlampidi
Kazan National Research Technological University, Kazan, Russia
3 shared publications Bulat Yarullin
Kazan National Research Technological University, Kazan, Russia
2 shared publications
Latest Publications
- Open Access
- 21 April 2026
- Published by Agrarian Science in Agrarian science
- No. 4,p. 144-150
Design of a distributed IoT system architecture for greenhouse microclimate monitoring based on MQTT protocol and edge computing
The article presents the design of a distributed IoT system architecture for greenhouse microclimate monitoring based on the MQTT protocol and edge computing. The relevance is driven by the low proportion of automated greenhouse facilities in the Russian Federation and the high deployment cost of traditional industrial controller-based systems. A four-layer architecture was developed, comprising a sensor node layer (ESP32-S3), an edge gateway layer (Raspberry Pi 4B), an MQTT broker layer (Mosquitto 2.0), and a cloud platform layer (PostgreSQL + Grafana). A comparative analysis of data transfer protocols (MQTT v5.0, CoAP, HTTP/2, AMQP 1.0) was conducted based on latency, throughput, traffic consumption, and power consumption criteria. MQTT v5.0 provides an optimal balance of throughput (12,400 msg/s) and latency (47 ms) with minimal traffic volume. An original methodology for calculating an integral system performance index accounting for latency, throughput, and message loss rate was proposed. Load testing on a testbed (50–400 sensor nodes, 72 hours) demonstrated that a configuration with 4 edge gateways ensures stable operation with 400 nodes at 89 ms latency and losses below 0.05%. The integral performance index reached 0.91 for the optimal configuration. It is shown that the application of edge computing reduces traffic volume between the facility and the cloud by 78% through local data aggregation.
- 21 April 2026
- Published by Agrarian Science in Agrarian science
- No. 4,p. 144-150
Open AccessDesign of a distributed IoT system architecture for greenhouse microclimate monitoring based on MQTT protocol and edge computing
The article presents the design of a distributed IoT system architecture for greenhouse microclimate monitoring based on the MQTT protocol and edge computing. The relevance is driven by the low proportion of automated greenhouse facilities in the Russian Federation and the high deployment cost of traditional industrial controller-based systems. A four-layer architecture was developed, comprising a sensor node layer (ESP32-S3), an edge gateway layer (Raspberry Pi 4B), an MQTT broker layer (Mosquitto 2.0), and a cloud platform layer (PostgreSQL + Grafana). A comparative analysis of data transfer protocols (MQTT v5.0, CoAP, HTTP/2, AMQP 1.0) was conducted based on latency, throughput, traffic consumption, and power consumption criteria. MQTT v5.0 provides an optimal balance of throughput (12,400 msg/s) and latency (47 ms) with minimal traffic volume. An original methodology for calculating an integral system performance index accounting for latency, throughput, and message loss rate was proposed. Load testing on a testbed (50–400 sensor nodes, 72 hours) demonstrated that a configuration with 4 edge gateways ensures stable operation with 400 nodes at 89 ms latency and losses below 0.05%. The integral performance index reached 0.91 for the optimal configuration. It is shown that the application of edge computing reduces traffic volume between the facility and the cloud by 78% through local data aggregation.
- 1 February 2026
- Published by Pleiades Publishing Ltd in Kinetics and Catalysis
- Vol. 67 (1) , 50-62
Recent Advances in Catalytic Hydrogenation of α-Methylstyrene
The review covers current advances in the catalytic hydrogenation of α-methylstyrene to isopropylbenzene. The focus is on platinum group catalysts (palladium, platinum, rhodium, iridium), their activity, selectivity, kinetics, and thermal stability, as well as reactor designs that improve the efficiency of the process. The prospects for using more accessible metals—nickel, iron, cobalt, manganese, and molybdenum—are highlighted, including the features of multicomponent systems and stability issues. The influence of the environment and new carriers, including plasma-activated graphene materials, on the kinetics and selectivity of hydrogenation is considered. The review serves as a basis for the development of innovative and sustainable technologies in the chemical industry.
- 1 February 2026
- Published by Pleiades Publishing Ltd in Kinetics and Catalysis
- Vol. 67 (1) , 50-62
Recent Advances in Catalytic Hydrogenation of α-Methylstyrene
The review covers current advances in the catalytic hydrogenation of α-methylstyrene to isopropylbenzene. The focus is on platinum group catalysts (palladium, platinum, rhodium, iridium), their activity, selectivity, kinetics, and thermal stability, as well as reactor designs that improve the efficiency of the process. The prospects for using more accessible metals—nickel, iron, cobalt, manganese, and molybdenum—are highlighted, including the features of multicomponent systems and stability issues. The influence of the environment and new carriers, including plasma-activated graphene materials, on the kinetics and selectivity of hydrogenation is considered. The review serves as a basis for the development of innovative and sustainable technologies in the chemical industry.
- 30 January 2026
- Published by Springer Nature in Journal of Polymer Research
- Vol. 33 (2) , 46
Hyperbranched oligohydroxyethylaminourea(methyl)urethanes: synthesis, structure and properties
- 30 January 2026
- Published by Springer Nature in Journal of Polymer Research
- Vol. 33 (2) , 46
Hyperbranched oligohydroxyethylaminourea(methyl)urethanes: synthesis, structure and properties
- 1 December 2025
- Published by Pleiades Publishing Ltd in Russian Journal of General Chemistry
- Vol. 95 (12) , 3809-3819
Polydentate Adsorbent of Transition Metals Based on Hyperbranched Polyester Polyphthalate
At present, multifunctional adsorbents capable of not only effectively binding metal ions but also maintaining stability under aggressive conditions (e.g., in an acidic medium) are of great interest. In this work, Cu(II) and Co(II) complexes based on hyperbranched polyester polyphthalate are obtained and characterized for the first time. Complexation is confirmed by IR and electron spectroscopy methods, which revealed the monodentate nature of the coordination of carboxylate groups and the formation of covalent bonds with metals. The coordination units of the complexes have a six-coordinated octahedral geometry with tetragonal distortion, and the ligand:metal molar ratio is 4:1. Calculation of the stability constants showed high stability of the complexes with logarithms of the constants of 18.11 for Cu(II) and 17.23 for Co(II). The TGA method established that the onset temperature of destruction of the copper and cobalt complexes is 210 and 252°C. The ligand demonstrated high sorption capacity for Cu(II) and Co(II) ions—47.88 and 28.21 g/kg, respectively, while desorption was not observed even at low pH (1), which indicates the strength of the complex bonds. These results indicate the possibility of using the macroligand as a sorbent in an acidic environment, for example, in the purification of industrial wastewater and mine waters.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Russian Journal of General Chemistry
- Vol. 95 (12) , 3809-3819
Polydentate Adsorbent of Transition Metals Based on Hyperbranched Polyester Polyphthalate
At present, multifunctional adsorbents capable of not only effectively binding metal ions but also maintaining stability under aggressive conditions (e.g., in an acidic medium) are of great interest. In this work, Cu(II) and Co(II) complexes based on hyperbranched polyester polyphthalate are obtained and characterized for the first time. Complexation is confirmed by IR and electron spectroscopy methods, which revealed the monodentate nature of the coordination of carboxylate groups and the formation of covalent bonds with metals. The coordination units of the complexes have a six-coordinated octahedral geometry with tetragonal distortion, and the ligand:metal molar ratio is 4:1. Calculation of the stability constants showed high stability of the complexes with logarithms of the constants of 18.11 for Cu(II) and 17.23 for Co(II). The TGA method established that the onset temperature of destruction of the copper and cobalt complexes is 210 and 252°C. The ligand demonstrated high sorption capacity for Cu(II) and Co(II) ions—47.88 and 28.21 g/kg, respectively, while desorption was not observed even at low pH (1), which indicates the strength of the complex bonds. These results indicate the possibility of using the macroligand as a sorbent in an acidic environment, for example, in the purification of industrial wastewater and mine waters.
- 7 November 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (11) , 1-13
Synthesis, structural characterization, complexation, and tanning properties of oligohydroxyethylaminoethyl carbonate dendrimer
- 7 November 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (11) , 1-13
Synthesis, structural characterization, complexation, and tanning properties of oligohydroxyethylaminoethyl carbonate dendrimer
- 1 August 2025
- Published by Pleiades Publishing Ltd in Doklady Chemistry
- Vol. 520 (4) , 150-159
Molecular Design of New Oligohydroxyethylaminoethylurethane Dendrimers
This paper presents the synthesis of first- to fourth-generation (G1–G4) oligohydroxyethylaminoethylurethane dendrimers using a two-stage divergent method. The dendrimers were obtained by the reaction of triethanolamine with dimethyl carbonate and diethanolamine in strictly stoichiometric ratios, which ensured high product yields (97.4% for G1, 98.2% for G2, 98.4% for G3, 98.8% for G4). The resulting compounds are resinous substances with a colour range from reddish-brown (G1) to rich amber (G2) to dark brown (G3, G4), with a characteristic sweetish odour. Dendrimers (G1-G4) are soluble in water, dimethyl sulfoxide, dichloromethane, acetone, dioxane, dimethylformamide and alcohols, but are insoluble in chloroform, tetrachloromethane, aromatic and aliphatic hydrocarbons. The structure of dendrimers has been proven by 1H, 13C NMR, IR, titrimetry, and elemental analysis. An increase in molecular weight (498, 1152, 2504, and 5164 g/mol) and the number of hydroxyl groups (6, 12, 24, and 48) has been established with the increase in generation from 1 to 4, as well as the transformation of 1 (G1), 3 (G2), 5 (G3), and 11 (G4) urethane groups into amino groups due to the elimination of carbon dioxide. The thermal stability of dendrimers is in the range of 104–106°C. Prospects for further research are related to the study of the use of these dendrimers as effective platforms for catalysts, which opens up new opportunities in the field of chemical synthesis.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Doklady Chemistry
- Vol. 520 (4) , 150-159
Molecular Design of New Oligohydroxyethylaminoethylurethane Dendrimers
This paper presents the synthesis of first- to fourth-generation (G1–G4) oligohydroxyethylaminoethylurethane dendrimers using a two-stage divergent method. The dendrimers were obtained by the reaction of triethanolamine with dimethyl carbonate and diethanolamine in strictly stoichiometric ratios, which ensured high product yields (97.4% for G1, 98.2% for G2, 98.4% for G3, 98.8% for G4). The resulting compounds are resinous substances with a colour range from reddish-brown (G1) to rich amber (G2) to dark brown (G3, G4), with a characteristic sweetish odour. Dendrimers (G1-G4) are soluble in water, dimethyl sulfoxide, dichloromethane, acetone, dioxane, dimethylformamide and alcohols, but are insoluble in chloroform, tetrachloromethane, aromatic and aliphatic hydrocarbons. The structure of dendrimers has been proven by 1H, 13C NMR, IR, titrimetry, and elemental analysis. An increase in molecular weight (498, 1152, 2504, and 5164 g/mol) and the number of hydroxyl groups (6, 12, 24, and 48) has been established with the increase in generation from 1 to 4, as well as the transformation of 1 (G1), 3 (G2), 5 (G3), and 11 (G4) urethane groups into amino groups due to the elimination of carbon dioxide. The thermal stability of dendrimers is in the range of 104–106°C. Prospects for further research are related to the study of the use of these dendrimers as effective platforms for catalysts, which opens up new opportunities in the field of chemical synthesis.
- 1 July 2025
- Published by Pleiades Publishing Ltd in Russian Journal of General Chemistry
- Vol. 95 (7) , 1870-1881
Hyperbranched Polyaminoethylene Carbonates of the Second and Third Generations and Their Copper(II) Complexes: Synthesis, Structure and Properties
The first representatives of hyperbranched polyaminoethylene carbonates of the second and third generations were synthesized from triethanolamine and dimethyl carbonate. The reaction of these polymers with CuCl2∙2H2O yielded Cu(II) complexes. Structure of hyperbranched macromolecules and Cu(II) complexes was proved by 1H, 13C NMR, IR, UV-Vis spectroscopy, titrimetry, elemental analysis and TGA. By 1H NMR spectroscopy and titrimetry data, hyperbranched polyaminoethylene carbonates of the second and third generations have 11 and 21 terminal hydroxyl groups, branching degree of 0.8 and 0.82, Mn equal to 1782 and 3986 g/mol, respectively. The thermal transformations in the polymers were studied by TGA method. The morphology and hydrodynamic diameter of particles were determined by SEM, CLSM, NTA and dynamic light scattering methods. The temperature dependence of the kinematic viscosity of polymers was revealed, and the refractive index and pH of hyperbranched polymers were determined.
- 1 July 2025
- Published by Pleiades Publishing Ltd in Russian Journal of General Chemistry
- Vol. 95 (7) , 1870-1881
Hyperbranched Polyaminoethylene Carbonates of the Second and Third Generations and Their Copper(II) Complexes: Synthesis, Structure and Properties
The first representatives of hyperbranched polyaminoethylene carbonates of the second and third generations were synthesized from triethanolamine and dimethyl carbonate. The reaction of these polymers with CuCl2∙2H2O yielded Cu(II) complexes. Structure of hyperbranched macromolecules and Cu(II) complexes was proved by 1H, 13C NMR, IR, UV-Vis spectroscopy, titrimetry, elemental analysis and TGA. By 1H NMR spectroscopy and titrimetry data, hyperbranched polyaminoethylene carbonates of the second and third generations have 11 and 21 terminal hydroxyl groups, branching degree of 0.8 and 0.82, Mn equal to 1782 and 3986 g/mol, respectively. The thermal transformations in the polymers were studied by TGA method. The morphology and hydrodynamic diameter of particles were determined by SEM, CLSM, NTA and dynamic light scattering methods. The temperature dependence of the kinematic viscosity of polymers was revealed, and the refractive index and pH of hyperbranched polymers were determined.
- 5 September 2024
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 34 (3) , 433-452
Advances in hyperbranched polymer chemistry
- 5 September 2024
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 34 (3) , 433-452
Advances in hyperbranched polymer chemistry
- 1 April 2024
- Published by Springer Nature in Russian Chemical Bulletin
- Vol. 73 (4) , 1052-1064
Metal-polymer framework based on hyperbranched polyester polyphthalate and palladium(ii) ions: synthesis, structure, and physical and catalytic properties
- 1 April 2024
- Published by Springer Nature in Russian Chemical Bulletin
- Vol. 73 (4) , 1052-1064
Metal-polymer framework based on hyperbranched polyester polyphthalate and palladium(ii) ions: synthesis, structure, and physical and catalytic properties