Ilhan Garip
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ilhan Garip has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Latest Publications
- Open Access
- 1 January 2025
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 15 (vol15i3) , 614-621
An Approach to Predicting the Effect of Shadows from Surrounding Buildings on the Performance of Solar Photovoltaic
An Approach to Predicting the Effect of Shadows from Surrounding Buildings on the Performance of Solar Photovoltaic
- 1 January 2025
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 15 (vol15i3) , 614-621
Open AccessAn Approach to Predicting the Effect of Shadows from Surrounding Buildings on the Performance of Solar Photovoltaic
An Approach to Predicting the Effect of Shadows from Surrounding Buildings on the Performance of Solar Photovoltaic
- Open Access
- 1 January 2025
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 15 (V15i1) , 152-160
A Novel High-Gain Cuk-Sepic Converter with Coupled Inductor for Renewable Energy Applications
A Novel High-Gain Cuk-Sepic Converter with Coupled Inductor for Renewable Energy Applications
- 1 January 2025
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 15 (V15i1) , 152-160
Open AccessA Novel High-Gain Cuk-Sepic Converter with Coupled Inductor for Renewable Energy Applications
A Novel High-Gain Cuk-Sepic Converter with Coupled Inductor for Renewable Energy Applications
- Open Access
- 1 January 2024
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 14 (v14i1) , 31-37
A Renewable Microgrid with Hydrogen for Residential Use: Fuzzy Logic for Multi-Objectives
A Renewable Microgrid with Hydrogen for Residential Use: Fuzzy Logic for Multi-Objectives
- 1 January 2024
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 14 (v14i1) , 31-37
Open AccessA Renewable Microgrid with Hydrogen for Residential Use: Fuzzy Logic for Multi-Objectives
A Renewable Microgrid with Hydrogen for Residential Use: Fuzzy Logic for Multi-Objectives
- Open Access
- 1 January 2024
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 14 (v14i1) , 23-30
Heat Energy Utilisation on Solar Panels Through Electric Thermal Generators
Heat Energy Utilisation on Solar Panels Through Electric Thermal Generators
- 1 January 2024
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 14 (v14i1) , 23-30
Open AccessHeat Energy Utilisation on Solar Panels Through Electric Thermal Generators
Heat Energy Utilisation on Solar Panels Through Electric Thermal Generators
- Open Access
- 1 January 2023
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 13 (V32i3) , 1223-1232
Effects of Open Circuit Potential and Characterization of Electro-Active Biofilm for Microbial Fuel Cells using Compost Leachate
A microbial fuel cell produce electric energy and clean up effluents thanks to bio-electrochemical reactions in which electro-active bacteria are used as catalysts, it is considered as a sustainable technique. This paper focuses on the effect of different times of open circuit potential on the current density produced by compost leachate. The obtained results demonstrate that an electro-active biofilm was developed using compost leachate, with a potential (-0.2V/ESC. Maximum current density (458.3 µA/cm²) was reached after only 3h of polarization after an open circuit duration of 28 days. Scanning electron microscopy has been used to characterize the biofilm formed on carbon graphite electrodes at different phases.
- 1 January 2023
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 13 (V32i3) , 1223-1232
Open AccessEffects of Open Circuit Potential and Characterization of Electro-Active Biofilm for Microbial Fuel Cells using Compost Leachate
A microbial fuel cell produce electric energy and clean up effluents thanks to bio-electrochemical reactions in which electro-active bacteria are used as catalysts, it is considered as a sustainable technique. This paper focuses on the effect of different times of open circuit potential on the current density produced by compost leachate. The obtained results demonstrate that an electro-active biofilm was developed using compost leachate, with a potential (-0.2V/ESC. Maximum current density (458.3 µA/cm²) was reached after only 3h of polarization after an open circuit duration of 28 days. Scanning electron microscopy has been used to characterize the biofilm formed on carbon graphite electrodes at different phases.
- RetractedOpen Access
- 29 December 2021
- Published by Wiley in Journal of Nanomaterials
- Vol. 2021, 1-13
Evaluation of Physicothermal Properties of Solar Thermic Fluids Dispersed with Multiwalled Carbon Nanotubes and Prediction of Data Using Artificial Neural Networks
A review of multiwalled carbon nanotubes as solar thermic fluids and their thermophysical properties is done in this article. The basic fluids were ethylene glycol and water in ratios of 100 : 0, 90 : 10, and 80 : 20. To investigate how surface modification impacts thermophysical properties, three base fluids were combined with surfactant-assisted MWCNTs and oxidized MWCNTs in weight fractions of 0.125, 0.25, and 0.5 percent, respectively. It takes two months to check whether the dispersion stays constant. Thermal conductivity and viscosity measurement were done using heated discs and Anton Paar viscometers. Using oxidized MWCNTs to disperse, the base fluids increased thermal conductivity by 15% to 24%. Surfactant-assisted MWCNTs in nanofluids perform worse than oxidized MWCNTs. The dynamic viscosity of nanofluids is higher than that of basic fluids between 50 and 70°C. During a mathematical computation, all of the MWCNT weight fractions and ethylene glycol volume percentages are included. The correlation may be a good fit for the experimental data within limits. The characteristics are forecasted using feed-forward backpropagation. In this research, buried layer neurons and factors are examined.
- 29 December 2021
- Published by Wiley in Journal of Nanomaterials
- Vol. 2021, 1-13
RetractedOpen AccessEvaluation of Physicothermal Properties of Solar Thermic Fluids Dispersed with Multiwalled Carbon Nanotubes and Prediction of Data Using Artificial Neural Networks
A review of multiwalled carbon nanotubes as solar thermic fluids and their thermophysical properties is done in this article. The basic fluids were ethylene glycol and water in ratios of 100 : 0, 90 : 10, and 80 : 20. To investigate how surface modification impacts thermophysical properties, three base fluids were combined with surfactant-assisted MWCNTs and oxidized MWCNTs in weight fractions of 0.125, 0.25, and 0.5 percent, respectively. It takes two months to check whether the dispersion stays constant. Thermal conductivity and viscosity measurement were done using heated discs and Anton Paar viscometers. Using oxidized MWCNTs to disperse, the base fluids increased thermal conductivity by 15% to 24%. Surfactant-assisted MWCNTs in nanofluids perform worse than oxidized MWCNTs. The dynamic viscosity of nanofluids is higher than that of basic fluids between 50 and 70°C. During a mathematical computation, all of the MWCNT weight fractions and ethylene glycol volume percentages are included. The correlation may be a good fit for the experimental data within limits. The characteristics are forecasted using feed-forward backpropagation. In this research, buried layer neurons and factors are examined.
- 29 December 2021
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 9 (4) , 749-759
Design and Application of Multi-Axis Solar Tracking System to Increase the Efficiency of Solar Cell
In this study, a multi-axis solar tracking system was designed and implemented in order to increase the efficiency of electrical energy obtained from solar energy, which is one of the renewable energy sources.The solar tracking unit can monitor the sun on both the horizontal axis and the vertical axis. Using the solar tracking system, it is possible to increase the efficiency by approximately % 25-35. In the biaxial control system implemented in this study, the panel was placed on the north-south line and its movement was made in the east-west axis. If it is vertical movement, the lower part (south end) of the panel is rotated and the upper part (north) is moved up and down. Optimization of the system has been achieved with this mechanism. In the implemented system, horizontal movement is provided with the help of stepper motor controlled by arduino in line with the information coming from LDRs. Vertical axis movement is provided with the help of linear motor controlled by arduino in line with the information coming from LDRs. LDRs that provide sun tracking are placed on the top of the panel. The electrical energy produced by the system can be used as DC and AC current sources with the help of the converter and inverter circuits. In addition, this energy DC can be stored in a battery group connected to the system.
- 29 December 2021
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 9 (4) , 749-759
Design and Application of Multi-Axis Solar Tracking System to Increase the Efficiency of Solar Cell
In this study, a multi-axis solar tracking system was designed and implemented in order to increase the efficiency of electrical energy obtained from solar energy, which is one of the renewable energy sources.The solar tracking unit can monitor the sun on both the horizontal axis and the vertical axis. Using the solar tracking system, it is possible to increase the efficiency by approximately % 25-35. In the biaxial control system implemented in this study, the panel was placed on the north-south line and its movement was made in the east-west axis. If it is vertical movement, the lower part (south end) of the panel is rotated and the upper part (north) is moved up and down. Optimization of the system has been achieved with this mechanism. In the implemented system, horizontal movement is provided with the help of stepper motor controlled by arduino in line with the information coming from LDRs. Vertical axis movement is provided with the help of linear motor controlled by arduino in line with the information coming from LDRs. LDRs that provide sun tracking are placed on the top of the panel. The electrical energy produced by the system can be used as DC and AC current sources with the help of the converter and inverter circuits. In addition, this energy DC can be stored in a battery group connected to the system.
- Open Access
- 1 January 2021
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 14 (v11i2) , 176-183
Building Integration Parameters for Photovoltaic Simulation
Building Integration Parameters for Photovoltaic Simulation
- 1 January 2021
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 14 (v11i2) , 176-183
Open AccessBuilding Integration Parameters for Photovoltaic Simulation
Building Integration Parameters for Photovoltaic Simulation
- Open Access
- 1 January 2021
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 14 (v11i2) , 184-191
An evaluation of a solar-powered heating and hot water system for residential buildings using T*Sol
An evaluation of a solar-powered heating and hot water system for residential buildings using T*Sol
- 1 January 2021
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 14 (v11i2) , 184-191
Open AccessAn evaluation of a solar-powered heating and hot water system for residential buildings using T*Sol
An evaluation of a solar-powered heating and hot water system for residential buildings using T*Sol