Douglas Sarango
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Douglas Sarango has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Teresa Olinda Velasquez Bejarano
Universidad Nacional Agraria La Molina. Lima, Perú
3 shared publications - Erick A. Rosales Asto
Universidad Nacional Agraria La Molina. Lima, Perú
2 shared publications - L. M. Palomino Zegarra
Universidad Nacional Agraria La Molina. Lima, Perú
2 shared publications - Abel Carmona Arteaga
Universidad Privada del Norte
1 shared publication - Antonio Contreras-De-Villar
Coastal Engineering Research Group, University of Cadiz, 11510 Puerto Real, Spain
1 shared publication - Aristides Ramon Serruto Colque1 shared publication
Latest Publications
- Open Access
- 1 December 2025
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 28 (3) , 31-40
Evaluación del producto de precipitación PISCO y ERA5 para generar Caudales Diarios en la cuenca del río Pativilca
The gridded daily precipitation data from PISCO v2.1 and ERA5 are evaluated by applying the GR4J hydrological model to generate daily flows in the sub-basins located upstream of the Cahua hydrometric station, in the upper Pativilca River basin, under a semi-distributed approach by sub-basins. The RS Minerve platform is used for the construction of the semi-distributed hydrological model. 33 sub-basins upstream of the Cahua hydrometric station were identified using QGIS software. The gridded precipitation data from PISCO v2.1 and ERA5 were validated based on 14 rain gauge stations located in the study basin and nearby areas, with historical precipitation records that were statistically analyzed to assess their reliability. When applying the semi-distributed sub-basin GR4J hydrological model, in the calibration stage (2000-2010), a Nash-Sutcliffe value of 0.76 was obtained using the daily precipitation information PISCO v2.1 and a value of 0.74 when using the daily precipitation information from ERA5. In the model validation stage (2011-2016), Nash-Sutcliffe values of 0.79 and 0.75 were obtained using the daily precipitation information from the aforementioned databases. The results obtained indicate that with the daily information from PISCO v2.1, the semi-distributed sub-basin GR4J hydrological model better represents the daily natural flows occurring in the Pativilca basin.
- 1 December 2025
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 28 (3) , 31-40
Open AccessEvaluación del producto de precipitación PISCO y ERA5 para generar Caudales Diarios en la cuenca del río Pativilca
The gridded daily precipitation data from PISCO v2.1 and ERA5 are evaluated by applying the GR4J hydrological model to generate daily flows in the sub-basins located upstream of the Cahua hydrometric station, in the upper Pativilca River basin, under a semi-distributed approach by sub-basins. The RS Minerve platform is used for the construction of the semi-distributed hydrological model. 33 sub-basins upstream of the Cahua hydrometric station were identified using QGIS software. The gridded precipitation data from PISCO v2.1 and ERA5 were validated based on 14 rain gauge stations located in the study basin and nearby areas, with historical precipitation records that were statistically analyzed to assess their reliability. When applying the semi-distributed sub-basin GR4J hydrological model, in the calibration stage (2000-2010), a Nash-Sutcliffe value of 0.76 was obtained using the daily precipitation information PISCO v2.1 and a value of 0.74 when using the daily precipitation information from ERA5. In the model validation stage (2011-2016), Nash-Sutcliffe values of 0.79 and 0.75 were obtained using the daily precipitation information from the aforementioned databases. The results obtained indicate that with the daily information from PISCO v2.1, the semi-distributed sub-basin GR4J hydrological model better represents the daily natural flows occurring in the Pativilca basin.
- Open Access
- 18 August 2025
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 28 (2) , 1-8
Estudio de la dinámica de las olas mediante modelamiento físico a escala reducida Caso Playa Carpayo, Callao-Perú
The use of small-scale physical models is a key tool in coastal engineering for representing phenomena such as wave propagation and the effects of coastal structures in breaking zones. This study presents the design and construction of a small-scale physical model applied to Playa Carpayo, located on the coast of Callao, Peru. Vertical and horizontal hydraulic similarity scales of 1:16.7 and 1:180.5, respectively, were used based on Froude similarity, with base maps generated from satellite imagery (Google Earth) and bathymetric data (NAVIONICS and DIHIDRONAV). The model was built in the wave-generating channel of the Laboratory of Hydraulics and Physical Models at EPIMF-FCF-UNMSM, allowing the simulation of wave transformation between T- and L-shaped groynes. Measurements were taken at two representative points: 100 m and 50 m from the prototype shoreline, recording significant wave heights (Hs) of 2.41 m and 1.79 m, respectively. These were compared with the results of the reduced-scale physical model, which yielded Hs values of 2.56 m and 1.88 m. The percentage difference in Hs between the physical model and the prototype was less than 10% in all cases analyzed, confirming the reliability of the developed physical model as an experimental validation tool for coastal dynamics studies.
- 18 August 2025
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 28 (2) , 1-8
Open AccessEstudio de la dinámica de las olas mediante modelamiento físico a escala reducida Caso Playa Carpayo, Callao-Perú
The use of small-scale physical models is a key tool in coastal engineering for representing phenomena such as wave propagation and the effects of coastal structures in breaking zones. This study presents the design and construction of a small-scale physical model applied to Playa Carpayo, located on the coast of Callao, Peru. Vertical and horizontal hydraulic similarity scales of 1:16.7 and 1:180.5, respectively, were used based on Froude similarity, with base maps generated from satellite imagery (Google Earth) and bathymetric data (NAVIONICS and DIHIDRONAV). The model was built in the wave-generating channel of the Laboratory of Hydraulics and Physical Models at EPIMF-FCF-UNMSM, allowing the simulation of wave transformation between T- and L-shaped groynes. Measurements were taken at two representative points: 100 m and 50 m from the prototype shoreline, recording significant wave heights (Hs) of 2.41 m and 1.79 m, respectively. These were compared with the results of the reduced-scale physical model, which yielded Hs values of 2.56 m and 1.88 m. The percentage difference in Hs between the physical model and the prototype was less than 10% in all cases analyzed, confirming the reliability of the developed physical model as an experimental validation tool for coastal dynamics studies.
- Open Access
- 18 August 2025
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 28 (2) , 9-16
Investigación de la tubificación en materiales finos a ser utilizados en presas para almacenamiento de agua
The present work evaluates the susceptibility to piping of soils used in the construction of earth dams based on laboratory tests, for which an experimental device has been developed based on the methods for evaluating erosion in cohesive soils developed by Wan & Fell and on standard methods for identifying dispersive. 28 soil samples grouped into 7 types (CH, sandy CL, CL, SC, ML, MH and SM) were evaluated from which the critical shear stress (τc) and the representative index of erosion rate (Ĩ) were determined. allows characterizing the behavior of the soils analyzed as extremely fast for the SM sample, very fast for the ML samples, moderately fast for the MH and CH samples and moderately slow for the CL, sandy CL and SC samples whose values for the conditions carried out vary from 0.1588 to 0.6607 being this parameter dimensionless. The significant factors that influence piping are the maximum dry density obtained from the compaction tests, the percentage of silt and the plasticity index. Piping occurs in soils without cohesion (silty sand) or with low plasticity (with a plasticity index less than 6 percent) and in cohesive soils with a plasticity index greater than 15 percent and with a silt percentage greater than 40 percent, compacted with the maximum dry density and the optimum moisture content obtained from the compaction tests.
- 18 August 2025
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 28 (2) , 9-16
Open AccessInvestigación de la tubificación en materiales finos a ser utilizados en presas para almacenamiento de agua
The present work evaluates the susceptibility to piping of soils used in the construction of earth dams based on laboratory tests, for which an experimental device has been developed based on the methods for evaluating erosion in cohesive soils developed by Wan & Fell and on standard methods for identifying dispersive. 28 soil samples grouped into 7 types (CH, sandy CL, CL, SC, ML, MH and SM) were evaluated from which the critical shear stress (τc) and the representative index of erosion rate (Ĩ) were determined. allows characterizing the behavior of the soils analyzed as extremely fast for the SM sample, very fast for the ML samples, moderately fast for the MH and CH samples and moderately slow for the CL, sandy CL and SC samples whose values for the conditions carried out vary from 0.1588 to 0.6607 being this parameter dimensionless. The significant factors that influence piping are the maximum dry density obtained from the compaction tests, the percentage of silt and the plasticity index. Piping occurs in soils without cohesion (silty sand) or with low plasticity (with a plasticity index less than 6 percent) and in cohesive soils with a plasticity index greater than 15 percent and with a silt percentage greater than 40 percent, compacted with the maximum dry density and the optimum moisture content obtained from the compaction tests.
- 26 April 2025
- Published by Springer Nature
- p. 283-297
Hydrogeological Modeling in the Archaeological Site Muyu Muyu—Chincheros—Apurímac
- 26 April 2025
- Published by Springer Nature
- p. 283-297
Hydrogeological Modeling in the Archaeological Site Muyu Muyu—Chincheros—Apurímac
- Open Access
- 16 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (9) , 1660
Updated Review of Longshore Sediment Transport: Advantages, Disadvantages, and Comparisons Using a Satellite Image Methodology
This review updates the different categories and formulations of the calculation of longshore sediment transport (LST) and summarizes their advantages and disadvantages. Most of these methodologies require calibration for areas different from those studied by their authors. Thus, a method of validation and calibration is presented here by processing satellite images with CoastSat software (release v 2.7) to determine accretion and erosion volumes. This low-cost methodology was applied to Salaverry Beach (Peru) to compare the results of the different formulations. A range of variation between −96% and +68% was observed concerning the error, with van Rijn’s formula being the most accurate for this particular case.
- 16 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (9) , 1660
Open AccessUpdated Review of Longshore Sediment Transport: Advantages, Disadvantages, and Comparisons Using a Satellite Image Methodology
This review updates the different categories and formulations of the calculation of longshore sediment transport (LST) and summarizes their advantages and disadvantages. Most of these methodologies require calibration for areas different from those studied by their authors. Thus, a method of validation and calibration is presented here by processing satellite images with CoastSat software (release v 2.7) to determine accretion and erosion volumes. This low-cost methodology was applied to Salaverry Beach (Peru) to compare the results of the different formulations. A range of variation between −96% and +68% was observed concerning the error, with van Rijn’s formula being the most accurate for this particular case.
- Open Access
- 1 December 2023
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 26 (3) , 25-32
Elastic deformation and modulus of elasticity in expansive clays by means of laboratory tests
Los suelos expansivos tienen propiedades especiales y es difícil encontrar los parámetros de resistencia; ángulo de fricción interna y cohesión por la teoría de Morh-Coulomb, por ello es necesario evaluar las constantes elásticas que nos permite calcular el asentamiento y la carga admisible de estos suelos. La presente investigación tiene como objetivos determinar la deformación elástica y el módulo de elasticidad en arcillas expansivas, tomándose tres muestras de San Ignacio - Cajamarca (M-1, M-2, M-3) y una de Pavayacu – Loreto (M-4). Para determinar dichos parámetros se realizó ensayos en el Laboratorio de Mecánica de Suelos de la UNALM, se ejecutaron ensayos de expansión libre; y sobre las muestras expandidas se efectuaron los ensayos de consolidación unidimensional. Para una carga específica se efectuaron ciclos de carga y descarga hasta generar una histéresis donde las curvas de carga y descarga se sobreponen formando una línea que corresponde a un comportamiento elástico. Como artificio se trazó por el origen de la curva de consolidación una paralela a la última histéresis, la cual corresponde a la tangente de la curva de consolidación. Se determino la deformación elástica y la deformación plástica en forma independiente. Los valores obtenidos del módulo de elasticidad (Es) se encuentran dentro de los rangos de 41.8 kg/cm2 a 70.1 kg/cm2, dichos valores clasifican al suelo como arcillas blandas.
- 1 December 2023
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 26 (3) , 25-32
Open AccessElastic deformation and modulus of elasticity in expansive clays by means of laboratory tests
Los suelos expansivos tienen propiedades especiales y es difícil encontrar los parámetros de resistencia; ángulo de fricción interna y cohesión por la teoría de Morh-Coulomb, por ello es necesario evaluar las constantes elásticas que nos permite calcular el asentamiento y la carga admisible de estos suelos. La presente investigación tiene como objetivos determinar la deformación elástica y el módulo de elasticidad en arcillas expansivas, tomándose tres muestras de San Ignacio - Cajamarca (M-1, M-2, M-3) y una de Pavayacu – Loreto (M-4). Para determinar dichos parámetros se realizó ensayos en el Laboratorio de Mecánica de Suelos de la UNALM, se ejecutaron ensayos de expansión libre; y sobre las muestras expandidas se efectuaron los ensayos de consolidación unidimensional. Para una carga específica se efectuaron ciclos de carga y descarga hasta generar una histéresis donde las curvas de carga y descarga se sobreponen formando una línea que corresponde a un comportamiento elástico. Como artificio se trazó por el origen de la curva de consolidación una paralela a la última histéresis, la cual corresponde a la tangente de la curva de consolidación. Se determino la deformación elástica y la deformación plástica en forma independiente. Los valores obtenidos del módulo de elasticidad (Es) se encuentran dentro de los rangos de 41.8 kg/cm2 a 70.1 kg/cm2, dichos valores clasifican al suelo como arcillas blandas.
- Open Access
- 16 December 2021
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 24 (3) , 68-77
Generación de precipitaciones y caudales de máximas avenidas para las cuencas del río Biabo
Este trabajo se enfoca en el cálculo y validación de los parámetros usados para la generación de caudales de máximas avenidas a lo largo de 16 puntos de interés en el cauce principal del río Biabo. Debido a la insuficiente información de mediciones meteorológicas e hidrométricas dentro de la cuenca, se utilizó la información grillada de precipitación diaria de la base de datos PISCO v2.1 del SENAMHI, el modelo de curvas de duración frecuencia del estudio ILLA-SENAMHI-UNI, y el hidrograma unitario de Snyder, y los resultados obtenidos fueron calibrados en base a los registros de caudales máximos de la estación hidrométrica Requena-Biabo. Así, por ejemplo, para la cuenca de la estación Requena-Biabo, la comparación entre los caudales de máximas avenidas generados con los caudales registrados para diferentes tiempos de retorno, el error obtenido fluctúa entre ±5%.
- 16 December 2021
- Published by Universidad Nacional Mayor de San Marcos, Vicerectorado de Investigacion in Revista de Investigación de Física
- Vol. 24 (3) , 68-77
Open AccessGeneración de precipitaciones y caudales de máximas avenidas para las cuencas del río Biabo
Este trabajo se enfoca en el cálculo y validación de los parámetros usados para la generación de caudales de máximas avenidas a lo largo de 16 puntos de interés en el cauce principal del río Biabo. Debido a la insuficiente información de mediciones meteorológicas e hidrométricas dentro de la cuenca, se utilizó la información grillada de precipitación diaria de la base de datos PISCO v2.1 del SENAMHI, el modelo de curvas de duración frecuencia del estudio ILLA-SENAMHI-UNI, y el hidrograma unitario de Snyder, y los resultados obtenidos fueron calibrados en base a los registros de caudales máximos de la estación hidrométrica Requena-Biabo. Así, por ejemplo, para la cuenca de la estación Requena-Biabo, la comparación entre los caudales de máximas avenidas generados con los caudales registrados para diferentes tiempos de retorno, el error obtenido fluctúa entre ±5%.