OBOleksiy Bondarenko

Oleksiy Bondarenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksiy Bondarenko has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    THE EFFECT OF THE STIFFNESS PROPERTIES OF SURFACE LAYERS ON THE CONTACT INTERACTION BETWEEN BODIES AND SURFACES OF SIMILAR SHAPE

    by Oleh Loznyi, Mykola M. Tkachuk, Oleksiy Bondarenko, Iryna Khramtsova, Natalia Domina, Svitlana Marusenko, Olga Kokhanovska, Liudmyla Bondarenko

    In many machine-building structures, parts that are in contact interaction are widespread. In many cases, such interaction occurs on surfaces that nominally coincide or are close. That is, the gap between the bodies is nominally either zero or very small. In these cases, two factors become important factors. The first is the contact stiffness, which is determined by the properties of the near-surface layers of materials. The second factor is the perturbation of the geometric shape of the contacting surfaces. Examples can be elements of bearings, engines, rotor supports, dies, molds, etc. To study the contact interaction and the stress-strain state of such contacting bodies, a variational formulation has been developed. This formulation consists of adapting the Kalker variational principle. An additional term is added to the additional work functional, which depends on the properties of the near-surface layers of the contacting bodies and on the shape of the contacting surfaces. Thus, a single mathematical model takes into account both important factors. The boundary element method is used to discretize the problem. For this purpose, the desired contact pressure is approximated by a set of piecewise linear functions based on a triangular network. As a result, the problem of minimizing a quadratic function on a set of linear constraints in the form of inequalities arises. As an example, an analysis of the contact interaction of a ball piston with a running track of a radial hydraulic transmission is carried out

  • Open Access

    RATIONAL TRANSMISSION OF A MILITARY WHEELED VEHICLE: FROM CONCEPT TO IMPLEMENTATION

    by Oleksiy Bondarenko, Oleksandr Ustynenko, Roman Protasov, Iryna Kyrychenko, Mykola Matyushenko, Sergij Andrienko, Ірина Кириченко, Микола Матюшенко, Сергій Андрієнко

    The article examines engineering trends in the design of weapons and military equipment that demonstrate a significant increase in the role of high-technology systems and innovative approaches to their development. In particular, the development of military equipment is strongly influenced by artificial intelligence technologies, robotics, new materials, and energy systems, which form new requirements for the characteristics of technical systems. As a result, it has been established that the effectiveness of the functioning of modern models of military equipment is largely determined by the level of scientific design of their main systems. An analysis of the structure and nomenclature of armored combat vehicles used by the Armed Forces of Ukraine has shown a significant share of wheeled combat vehicles in the overall spectrum of armament. At the same time, wheeled platforms fully cover the classes of MRAP vehicles and armored cars and occupy a substantial share in other classes of military equipment. This trend is driven by their high mobility, relatively lower operating costs, and wide possibilities of application in various types of combat tasks. It is indicated that the achievement of the required indicators of mobility, maneuverability, cross-country ability, and energy efficiency of combat wheeled vehicles largely depends on the efficiency of the functioning of their transmission systems. Modern mechanical stepped transmissions are characterized by a complex structure, a large number of design parameters, and a system of technical constraints. As a result, the expediency of using a systems approach to determine the rational parameters of transmission systems has been substantiated. The process of rational design of mechanical stepped transmissions is characterized by the presence of a large number of variable parameters, numerical and functional constraints, as well as several criteria for evaluating efficiency. Under such conditions, the optimization problem acquires a multi-extremal and nonlinear character, which complicates the application of classical deterministic optimization methods. In addition, the interrelation between individual system parameters may generate conflicting requirements for design solutions. It is shown that stochastic and metaheuristic algorithms can be an effective tool for solving complex problems of optimal design, as they provide a global search in a complex space of possible solutions. Their use makes it possible to account for randomness, avoid “stagnation” in local extrema, and ensure the robustness of the rational design process. Due to the combination of global and local search strategies, such algorithms are capable of forming rational parametric solutions even in the presence of a complex system of constraints. This provides grounds for considering metaheuristic algorithms as a promising “mechanism” for the rational design of mechanical stepped transmission systems of wheeled armored vehicles

  • Open Access

    FORMATION OF THE CONSTRAINT POOL FOR THE RATIONAL DESIGN OF TRANSMISSIONS OF MILITARY WHEELED VEHICLES

    by Oleksiy Bondarenko, Oleksandr Ustynenko, Illia Klochkov, Roman Protasov, Iryna Kyrychenko, Alla Zarubina, Ілля Клочков, Ірина Кириченко

    The article considers the current scientific and practical task of forming a pool of constraints for the task of rational design of transmissions of military wheeled vehicles. It is emphasized that the successful design of such a system requires not only the construction of a structural and logical model of the transmission, but also the clear formation of the attributes of the problem, among which numerical and functional constraints play one of the key roles. The proposed method of decomposition of the transmission system into logical elements allows formalizing the process of forming a system of constraints at the level of individual components and the system as a whole. The need for unification of constraints covering geometric, structural, kinematic, technological and operational characteristics of transmission elements is substantiated. The following constraints are classified: primary numerical (on design parameters), secondary functional (on parameter ratios), as well as specific conditions for checking the contact and bending strength of the gear transmission in accordance with the author's methods, state standards and generally accepted approaches. The primary numerical constraints on design variables (engagement modulus, number of teeth, inclination angles), secondary functional dependencies (gear ratios, center distances, etc.), as well as conditions for checking the contact and bending strength of transmission gears are considered. An approach to “soft” consideration of equality conditions is proposed, which allows taking into account design errors and not rejecting promising solutions. Strategies for forming constraints for various types of gears, including cylindrical, bevel and planetary series, are presented. As a result of the work, the process of creating a constraint pool has been formalized, which can be used in automated design systems, which will ensure high-quality and efficient rational design of gears taking into account structural and technical requirements. The constraint pool obtained by the proposed approach has broad prospects for use in optimization models of transmission systems and can be used for integration into CAD/CAE systems.

  • Open Access

    GENERALIZED DECOMPOSITION OF TRANSMISSIONS OF MILITARY WHEEL VEHICLES TO DETERMINE THE PROBABILITY OF FAILURE-FREE OPERATION

    by Oleksiy Bondarenko, Oleksandr Ustynenko, Roman Protasov, Illia Klochkov, Sergij Andrienko, Ілля Клочков, Сергій Андрієнко

    For a qualitative formulation of the task of rational design of a set of elements of a mechanical step transmission of a wheeled armored vehicle, as well as for the error-free formation of the attributes of the task, it is necessary to make a transition from a real object to its structural diagram. Such a transition is conveniently made through the kinematic diagram of the object and the structural diagram of the transmission to the structural-logical diagram. The relevance of the scientific and practical task of developing an approach to generalized decomposition of transmissions of military wheeled vehicles to determine the probability of failure-free operation is described. This makes it possible to understand the need to cover the specified topic and conduct relevant research and scientific calculations on the issue. The main categories are described, the concept of "logical element" is introduced, and a chain of hierarchical relationships between the main categories is formed. This allows us to maximally simplify and formalize the approach to building a model of rational design of transmissions of military wheeled vehicles, because the categories “logical element” and “mechanism” are related to target functions (criteria) and constraints, and the category “detail” is related to design parameters and constraints. A concise list of structural-logical elements has been formed, which allows us to replace both simple ones independently during decomposition and complex ones collectively when separating them. An example of the decomposition of transmissions of military wheeled vehicles is provided, which allows us to clearly demonstrate the proposed approach. Structural-logical diagrams are provided for typical structural-logical element designs. This allows us to form, based on the provisions of the theory of reliability of technical systems, the dependences of the probability of failure-free operation of each structural-logical element with subsequent composition into the target function of the probability of failure-free operation of the transmission system.

  • Open Access

    MATHEMATICAL MODEL AND OPTIMIZATION ALGORITHM ACCORDING TO THE CRITERIA OF MINIMUM CONTACT STRESS FOR INVOLUTE SPUR GEARS WITH INCREASED CONTACT RATIO

    by Stanislav Cherelev, Oleksandr Ustynenko, Miroslav Bošanský, Roman Protasov, Oleksiy Bondarenko, Sergij Andrienko, Станіслав Черельов, Мірослав Бошанскі, Сергій Андрієнко

    Reducing the mass and dimensions of involute spur gears is an actual task of modern mechanical engineering. One of the perspective ways to solve it is the use of gearing with an increased working tooth depth and profile contact ratio εα ≥ 2. The study is devoted to the development of optimal design methods for such gears. Optimality criteria is formulated as follows: the contact stresses in the pitch point must take a minimum value when all constructive, geometric, kinematic, and technological constraints are met, first, when the profile contact ratio εα ≥ 2 is ensured. Variables planning are defined. These are addendum coefficients of the basic racks tooth for pinion and wheel h*a1, h*a2; profile angle of the basic rack α; addendum modification coefficient of the pinion x1. Formed a system of constraints for the variables planning: the main functional constraint of the minimum value of the profile contact ratio: εα ≥ 2; constraint for the addendum coefficients of the basic racks tooth for pinion and wheel h*a1, h*a2; constraint for profile angle of the basic rack α; constraint for addendum modification coefficients x1, x2; absence of the cutter interference for tooth dedendum; absence of the sharpening for tooth addendum; absence of the mesh interference; ensuring the bending strength of pinion and wheel teeth. A method for solving the problem of optimal design is chosen. The method of probing the space of design parameters was chosen from all the variety. The points of the LPτ-sequence are used as test points. The method allows you to operate with a significant number of parameters – up to 51, provides a sufficiently large number of evenly distributed test points – up to 220. The algorithm for optimal design of gear has been developed. The main stages of the algorithm are as follows: setting input data (numerical constraints on design variables, gear parameters and its load); generation of LPτ-sequence for variables planning with simultaneous consideration of their numerical constraints; checking of functional constraints; additional verification calculations (if necessary) of the gearing contact strength; formation of an array of possible solutions; searching of the best solution variant (the test point corresponding to the minimum value of the objective function) by sorting the array.

  • Open Access

    ENSURING THE WORLD-CLASS TACTICAL AND TECHNICAL CHARACTERISTICS OF COMBAT ARMORED VEHICLES BY SUBSTANTIATING THE DESIGN AND TECHNOLOGICAL SOLUTIONS FOR ELEMENTS OF LOADING MECHANISMS: BASIC APPROACHES AND MODELS

    by Andrey Grabovskiy, Volodymyr Sierykov, Mykola M. Tkachuk, Iryna Hrechka, Olena Zinchenko, Anton Vasiliev, Oleksiy Bondarenko, Oleh Loznyi, Iryna Khramtsova, Андрій Грабовський, et al.

    The work is aimed at ensuring high tactical and technical characteristics of domestic armored combat vehicles by increasing the contact strength of the most critical and loaded elements of the charging mechanisms. This is due to the fact that due to the conditions of combat operations in modern conditions, the load on these elements of armored combat vehicles is sharply increasing. In such conditions, traditional methods for calculating the contact strength of these elements by conditional stresses with correction factors are not applicable. Therefore, in the course of research, we improved the models of contact interaction based on the development of the theory of variational inequalities. This model includes both variable and sought-after modifications of the shape of the working surfaces of the contacting elements of armored combat vehicles and the properties of the materials of the surface layers. A search for progressive design and technological solutions for these elements has been carried out. This makes it possible to develop a new generation of charging mechanisms that allow for an increase in the caliber of weapon projectiles and the rate of fire from advanced standard weapons. Such advanced solutions make it possible to ensure the tactical and technical characteristics of domestic advanced armored combat vehicles at the world level. The regularities of the influence of the varied parameters (geometric shape and properties of surface layers) on the contact strength of the elements of the charging mechanisms of armored combat vehicles are established. In particular, a significant asymmetry of the area of contact interaction between rollers and drive sprockets was found. This effect is caused by the general deformation, first of all, of the rollers. In this case, the contact area is shifted to the periphery of the working surface. Accordingly, the modification of this working surface (the formation of a “barrel”) has a positive effect on the load capacity of the contacting elements. The levels of contact pressure and equivalent Mises stresses decrease.

  • Open Access

    CRITERIA AND OBJECTIVE FUNCTIONS IN THE RATIONAL DESIGN OF TWO-SHAFT GEARBOXES

    by Oleksiy Bondarenko, Oleksandr Ustynenko, Roman Protasov, Sergij Andrienko, Сергій Андрієнко

    The relevance of the scientific and practical task of forming criteria and objective functions in the rational design of two-shaft gearboxes is described. This has made it possible to understand the need to highlight the topic and conduct relevant research and scientific discussions on the issue. The most significant mass and dimensional characteristics of two-shaft gearboxes from the perspective of vehicle design have been identified and used as criteria for optimal and rational design. Specifically: the center distance, which determines the placement of the gearbox shafts and its height; the length of the gearbox, which determines one of the main overall dimensions of the gearbox; the weight of the gearbox, the reduction of which may be dictated by the requirements for the technical object and also leads to a reduction in the material used and energy consumption; and the probability of reliable operation. Objective functions corresponding to the criteria of optimal and rational design are formulated, which are expressed by functional dependencies between geometric-constructive parameters and mass-dimensional characteristics, and also take into account the strength aspects of the main elements of two-shaft gearboxes. The objective function of the minimum center distance allows reducing the sum of the center distances of all gear meshes of the gearbox, and considering the condition of equality of the center distances of the gearbox gear meshes among themselves, to preserve the structural features and arrangement of the gear meshes. The objective function of minimum length accurately characterizes the linear dimension (length) of the gearbox. It considers not only the widths of the gear teeth but also other indicators (clearances, bearings, synchronizers, etc.), which are significant additions and increase the accuracy of calculations. The objective function of minimum weight of the gearbox consists of the weights of its main elements, namely: gears, shafts, bearings, synchronizers, and housing with the shifting mechanism. These elements make the main contribution to the mass characteristic, and the weights of other parts will be neglected due to their small sizes and inclusion in the error, which may be permissible for estimation calculations. The objective function of maximum reliability probability is presented as a certain «integral» value, which contains all calculated coefficients of stress levels for bending and contact stresses. Also design variables are defined

  • Open Access

    DETERMINATION OF QUALITY AND LOAD INDICATORS OF GEAR WITH HCR ENGAGEMENT WHEN IT IS USED IN TRANSMISSION ELEMENTS OF EXISTING MACHINES

    by Roman Protasov, Oleksandr Ustynenko, Stanislav Cherelev, Oleksiy Bondarenko, Sergij Andrienko, Mykola Matyushenko, Станіслав Черельов, Сергій Андрієнко, Микола Матюшенко

    The article is devoted to the evaluation of the use of an involute spur gear with an increased overlap ratio (HCR engagement) in the wheel planetary gearbox of the T-150K tractor, which is similar to the on-board transmission of the T-150 crawler tractor. The main criterion for the design of new gears with HCR engagement is to obtain an overlap ratio greater than 2.03. Given that the task is to replace the existing gears of the planetary gearbox with new ones, such parameters as the center distance, the widths of the crowns of the gears and the number of satellites were unchanged. It was allowed to change the gear ratio of the new planetary gearbox within 3% compared to the basic one, but first of all, combinations of gear wheels of the planetary gear were considered, in which this parameter was as close as possible to the existing one. Transmissions with several standard modules were considered, which, on the one hand, allow to realize an overlap ratio of more than 2.03, and on the other hand, the bending stresses in the root of the tooth will not exceed the yield strength of the material. All calculations were carried out in the KISSsoft software package, which provides a comprehensive assessment of the quality and strength indicators of the planetary transmission, taking into account the simultaneous operation of all satellites and the elastic deformation of the teeth. In the qualitative indicators, the overlap ratio, specific slip and thickness of the tops of the teeth of all gears will be evaluated in order to prevent sharpening. Strength indicators will be presented by graphs of contact pressures in "solar gear-satellite" and "satellite-epicycle" pairs and bending stresses in all gears. All the results of the calculations were compared with those of the existing transmission in order to determine the feasibility of using the HCR clutch in the presented wheel gearbox.

  • Open Access

    CROSSOVER AND MUTATION OPERATORS IN STOCHASTIC ALGORITHMS

    by Oleksiy Bondarenko, Oleksandr Ustynenko, Roman Protasov, Oleksandr Arkhipov

    The relevance of illuminating contemporary stochastic algorithms is highlighted, with the past two decades witnessing a rapid development in stochastic algorithms, attributed to increased research capabilities and growing data volumes. These algorithms prove effective in solving complex optimization problems, garnering attention from the global scientific community and practitioners worldwide. An exploration of the role and an overview of key crossover and mutation operators in stochastic algorithms represent a pertinent scientific and practical endeavor, fostering deeper understanding and popularization of this field. A genome category analysis is conducted, accompanied by a detailed review of primary gene encoding methods for practical application. Through a specific example of a genome corresponding to the optimal design of a two-stage helical gearbox, typical and adapted crossover and mutation operators are examined for efficient solution search. Each operator is provided with a textual description and a graphically illustrated representation, enhancing clarity, quality, and expediency in understanding the essence and operational sequences of the operator. The role and significance of crossover and mutation operators in stochastic algorithms are discussed, emphasizing that crossover operators facilitate the combination of beneficial genetic traits, enhancing offspring adaptability. Balanced utilization of these operators alongside other algorithmic stages, such as mutation and selection, is crucial for achieving an optimal balance between algorithm exploitation and search intensification. The importance and functionality of mutation operators in optimization stochastic algorithms are highlighted, indicating that mutation enables the avoidance of algorithmic stagnation in local extrema, preserving genetic diversity and stimulating the search for new optimal solutions. The particular significance of mutation usage in conditions of complex problem structures or large search spaces is noted. Thus, crossover and mutation operators are deemed key elements for enhancing the effectiveness of optimal solution search.