TCTetyana Chernogor

Tetyana Chernogor

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tetyana Chernogor has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • MODELING AND CALCULATION OF ENVIRONMENTAL PROTECTI

    by Yurii Selikhov, Konstantin Gorbunov, Tetyana Chernogor, Yehor Khrychov, Oleksandr Antonenko

    District heating (DH) systems of multi-storey buildings include the following main elements: a heat source, heating networks and local consumption systems – heating, air conditioning (cooling) and hot water supply systems. The heat generating device (boiler room) produces heat and distributes it to the apartments on the floors. However, when natural gas is burned in the heat generating device (boiler room), harmful substances such as nitrogen dioxideand carbon dioxide are released into the environment. A modeling project and calculation of a ground-to-water geothermal heat pump for hot water supply, heating, and cooling of a ten-story, forty-apartment building as a replacement for a heat-generating device was made. Based on the results of the calculation, a new schematic diagram of the heat pump was developed, which provides centralized heating and cooling of a ten-story forty-apartment building. And decentralized apartment stations for the distribution and hygienic preparation of hot water are made on the basis of boilers. The analysis of literature sources made it possible to choose new equipment with the highest efficiency. Calculations confirmed the correctness of the choice of equipment type and materials for replacement. The obtained energy efficiency of the new thermal power plant is 93 % for this project, as well as its energy payback period is 3.8 years, and the use of a geothermal ground-water heat pump in the thermal power plant allows: – to reduce the cost of thermal energy by reducing material consumption and equipment costs, save organic fuel; produce thermal energy; reduce thermal load and environmental pollution.Calculation of cost savings after abandoning natural gas as an energy carrier for a heatgenerating device gave savings of UAH. Calculation of the amount of emissions of harmful substances during combustion of natural gas showed that abandoning natural gas as an energy carrier makes it possible not to emit 1341 tons/year of harmful substances into the environ-ment.

  • Open Access

    FEATURES OF THE USE OF INTEGRALS FOR SOLVING PROBLEMS WITH PHYSICOCHEMICAL CONTENT

    by Olga Prishchenko, Tetyana Chernogor, Ольга Пріщенко

    The article considers some examples of application of integrals, which can be used in practical classes in higher mathematics, teaching students of chemical specialities. Examples of problems with physical and chemical content are given. Most often, when studying the course of higher mathematics it is necessary to solve problems of general character. But for the students of the Training and Research Institute of Chemical Technologies and Engineering the tasks that are directly related to their speciality are of greater interest. Thus, by considering the tasks such as those given in this article, we will increase the interest and motivation of future specialists to study this material. Also, when applying complex training sessions, students form and develop professional competences that allow them to perform engineering research work on specific technological processes. When solving many problems of both applied and theoretical nature it is necessary to sum up an infinite number of infinitesimal summands. This operation leads to one of the central concepts of mathematical analysis - the concept of integral (or definite integral). The definite integral is widely used in numerous applied mathematical and physical problems. For example, the application of the definite integral in geometric problems shows itself when solving problems to find areas of plane figures and surfaces that have complex shapes. The definite integral is applicable for finding the volume of a body of rotation, a body of arbitrary shape, as well as for finding the length of a curve, both in the plane and in space. The definite integral is used to calculate statistical moments, masses and centres of masses for arbitrary curves and surfaces in physics and theoretical mechanics problems. It can also be applied in calculating the work of force along a given path and other problems.

  • Wood-polymer composite from secondary thermoplastics with enhanced properties

    by National Technical University "Kharkiv Polytechnic Institute", S.O. Kopylov, G.M. Cherkashina, I.O. Lavrova, T.т. Chernogor

    This article presents the development of novel wood-polymer composites and the investigation of their properties. The study aimed to optimize the composition of wood-polymer composites based on secondary raw materials to achieve improved physical and mechanical characteristics. The effect of modification on the physical and mechanical properties of wood-polymer composites was analyzed in comparison with conventional industrial samples. The dependences of impact strength and static yield strength on the amount of the mixture of petroleum-polymer resin and expanded polystyrene were studied. Additionally, the influence of petroleum-polymer resin content on drying time was evaluated. Key physical and mechanical properties, including impact strength, bending stress, and microhardness, were assessed. The study also explored the climatic effects on wood-polymer composites, particularly the impact of moisture and temperature. Water absorption, wear resistance, and dimensional stability were tested within a temperature range of +300C to –150C. A comparative analysis of the main performance indicators of the proposed composite and existing industrial samples was conducted.


  • Open Access

    CONSTRUCTION OF STATISTICAL MODELS OF CHEMICAL AND TECHNOLOGICAL OBJECTS ON THE BASIS OF A COMPLETE FACTOR EXPERIMENT

    by Olga Prishchenko, Tetyana Chernogor, Ольга Пріщенко

    The article deals with the construction of a mathematical model of the process, which is created based on the results of a full factorial experiment. Often, only the results of experimental studies carried out at such objects are the information, based on the processing of which, according to the obtained mathematical model of the object, a high-quality control algorithm for this object can be implemented. At the same time, the construction of a mathematical model that describes the technological process with the required accuracy often involves a huge amount of work at the stage of experiments. The task of planning experiments is to establish the minimum required number of them and the conditions for their implementation, to choose methods for mathematical processing of the results, and to make decisions. Designing experiments significantly reduces the number of experiments required to obtain a process model. An active experiment involves a purposeful choice of factor values. Compared to a passive experiment, such an experiment turns out to be more efficient and economical, since the amount of experimental work is significantly reduced. In this article, in relation to chemical technology, the issues of organizing an experiment, mathematical processing of experimental data and mathematical planning of an experiment in the search for optimal conditions for conducting a technological process are described. Mathematical modeling and optimization of chemical technology objects is of great importance for obtaining higher professional education for students of the Educational and Scientific Institute of Chemical Technology and Engineering.


  • INNOVATIVE METHODS OF TEACHING THE DISCIPLINE HIGHER MATHEMATICS TO STUDENTS STUDYING CHEMICAL TECHNOLOGY AND ENGINEERING

    by Olga Prishchenko, Nadezhda Cheremskaya, Tetyana Chernogor, Svetlana Bukhkalo, Ольга Пріщенко, Світлана Бухкало

    The article discusses some innovative methods that can be used in practical classes in higher mathematics, teaching students of chemical specialties. The possibilities for the development of competencies in complex interuniversity projects are closely related to the issues of classifying all types of interrelationships of disciplines within the framework of courses according to curricula, as well as the choice of additional universal competencies. Mathematics for chemical process engineers is, first of all, a useful tool for solving many chemical and technological problems and tasks. The typical curriculum takes into account the modern needs of related and special disciplines in the mathematical education of students, and consists of four main sections: the foundations of algebra and analytical geometry, mathematical analysis, differential equations, probability theory and mathematical statistics. When writing the article, many years of experience in teaching students of chemical specialties by the department 'Higher Mathematics' of the National Technical University «KhPI» were used. The purpose of the scientific research of teachers and students presented in the article is to increase the competitiveness of Ukrainian technical education in the world market by developing and implementing innovative models and methods. When writing this article, the authors pursued three goals. First, to give the general course of mathematics for students of chemical and related specialties an appropriate professional orientation; secondly, to form in students of the first years of study ideas about the mathematical apparatus, information technologies and the mathematical modeling of modern chemistry and, thirdly, to instill in students the primary skills of building mathematical models of the simplest physical and mathematical processes when studying a mathematics course.


  • CONSTRUCTION OF MATHEMATICAL MODELS USING THE METHODS OF CORRELATION AND REGRESSION ANALYSIS

    by Olga Prishchenko, Nadezhda Cheremskaya, Tetyana Chernogor

    The article discusses the construction of a mathematical model using the methods of correlation and regression analysis in determining the functional relationship between the quantities. When conducting an experiment, it is often necessary to establish the interdependence between two or more quantities in order to obtain an empirical formula. In some cases, this is a simple task, because these connections are almost obvious or known in advance. As a rule, to establish the relationship between different indicators, factors and characteristics is not a trivial task. There is a need to use some hypothesis in the form of functional dependence. In other words, it is necessary to replace this functional dependence with a fairly simple mathematical expression. Such a mathematical expression can be a linear equation or a polynomial. In order to use such experimental data to determine such a mathematical or functional relationship between variables, the methods of correlation and regression analysis are used. Correlation analysis provides an answer to the statistical hypothesis of the absence or presence of a relationship between variables with some predetermined confidence probability. Determination of the functional dependence between different values on their experimental values is carried out using regression analysis. It is based on the well-known method of least squares. Proposing one or another regression equation, the researcher determines both the very existence of the relationship between variables and its mathematical form. Regression analysis considers the relationship between the dependent quantity and non-dependent variables. This relationship is represented using a mathematical model, that is, an equation that connects the dependent and independent variables. Processing of experimental data using correlation and regression analysis allows us to build a statistical mathematical model in the form of a regression equation. Thus, the methods of correlation and regression analysis are closely related.