Ibrahim Aljamaan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ibrahim Aljamaan has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Mujahed Al-Dhaifallah
Interdisciplinary Research Center for Sustainable Energy Systems (IRC-SES), King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
2 shared publications - Abdullah Alharbi
Department of Accounting & Finance, KFUPM Business School, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
1 shared publication - Abdullah Bubshait
Department of Electrical Engineering, College of Engineering, King Faisal University, Al Ahsa, Saudi Arabia
1 shared publication - Ahmed Alenany
Computer Systems Engineering, MSA University, October 6, Giza, Egypt
1 shared publication Baraa Alqarrash
Biomedical Engineering Department, College of Engineering, Imam Abdulrahman Bin Faisal University
1 shared publicationDalal D. Alahmari
1 shared publication
Latest Publications
- Open Access
- 16 November 2026
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 14, 1972461
Energy-harvesting wearable patch for real-time athletes’ risk detection
Athletes are often at high risk of sudden and severe injury or illness during training sessions due to a lack of safety measures. Failure to monitor health conditions and vital signs during training can result in serious consequences for athletes. Currently, several devices in the market measure vital signs and provide them as raw data; however, they do not prioritize the athlete’s safety and often offer limited feedback on their health condition. Additionally, many of these devices lack ergonomic designs, which limit the athlete’s mobility. This wearable health monitoring device was designed to be both lightweight and cost-effective. It collects and tracks health metrics while providing real-time feedback to the user via an application to support the athlete’s safety. A key feature is the utilization of energy harvesting technology to power the system, which includes a heart rate sensor, core body temperature sensor, and sweat sensor. Furthermore, the acquired data are analyzed using a developed algorithm to detect abnormal and critical health conditions such as dehydration, overtraining syndrome, exertional heat illnesses, and heart attacks risk indicators. These critical data points, which exceed normal ranges, are classified into two alarm levels: Warning Level and Critical Level. Ultimately, the data are transmitted via Wi-Fi to a mobile application, which provides information about the athlete’s health status and guidance to ensure their safety.
- 16 November 2026
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 14, 1972461
Open AccessEnergy-harvesting wearable patch for real-time athletes’ risk detection
Athletes are often at high risk of sudden and severe injury or illness during training sessions due to a lack of safety measures. Failure to monitor health conditions and vital signs during training can result in serious consequences for athletes. Currently, several devices in the market measure vital signs and provide them as raw data; however, they do not prioritize the athlete’s safety and often offer limited feedback on their health condition. Additionally, many of these devices lack ergonomic designs, which limit the athlete’s mobility. This wearable health monitoring device was designed to be both lightweight and cost-effective. It collects and tracks health metrics while providing real-time feedback to the user via an application to support the athlete’s safety. A key feature is the utilization of energy harvesting technology to power the system, which includes a heart rate sensor, core body temperature sensor, and sweat sensor. Furthermore, the acquired data are analyzed using a developed algorithm to detect abnormal and critical health conditions such as dehydration, overtraining syndrome, exertional heat illnesses, and heart attacks risk indicators. These critical data points, which exceed normal ranges, are classified into two alarm levels: Warning Level and Critical Level. Ultimately, the data are transmitted via Wi-Fi to a mobile application, which provides information about the athlete’s health status and guidance to ensure their safety.
- Open Access
Valorization of Municipal Tree Leaf Waste via Mobile Pyrolysis: Techno-Economic and Environmental Feasibility Assessment
A case study of municipal tree leaf waste valorization is presented for Jubail Industrial City, Saudi Arabia. The current disposal practice primarily relies on landfilling, resulting in resource loss and greenhouse gas emissions. This study evaluated the technical, economic, and environmental feasibility of a mobile pyrolysis station for valorizing municipal tree leaf waste. Laboratory slow pyrolysis experiments were conducted at 350 °C for 2 h, producing 64.67% biochar, 6.67% bio-oil, and 28.67% non-condensable gases by weight. These findings guided the conceptual design of a truck-mounted mobile pyrolysis station integrating mass and energy balances, equipment sizing, process engineering, safety, techno-economic, and environmental evaluations. At an annual capacity of 1252.8 t of wet leaf biomass, the station produces approximately 622.4 t of biochar, 64.2 t of bio-oil, and 275.9 t of non-condensable gases. The total capital investment was estimated at USD 484,522. Three economic scenarios were evaluated. Under the high-price biochar scenario, using a selling price of USD 2.15 kg−1, the initial full-capacity annual revenue was USD 1.389 million, with a 10-year NPV of USD 6.19 million, an IRR of 155.1%, and payback of 0.81 years. Under the low-price biochar scenario, using a selling price of USD 1.075 kg−1, the NPV decreased to USD 2.11 million, the IRR decreased to 67.1%, and payback increased to 1.88 years. With the same low biochar price and a 50% increase in OPEX, the NPV remained positive at USD 1.22 million, with an IRR of 44.6% and payback of 2.64 years. The environmental assessment evaluated two biochar carbon storage cases. Using the full calculated carbon storage credit, the net annual environmental benefit was 7036.79 t CO2e, whereas a conservative 50% carbon storage sensitivity scenario provided a benefit of 6489.96 t CO2e compared with current landfill disposal practices. These findings support mobile pyrolysis as a technically feasible, economically resilient, and environmentally sustainable strategy for municipal tree leaf waste valorization in Saudi Arabia.
Open AccessValorization of Municipal Tree Leaf Waste via Mobile Pyrolysis: Techno-Economic and Environmental Feasibility Assessment
A case study of municipal tree leaf waste valorization is presented for Jubail Industrial City, Saudi Arabia. The current disposal practice primarily relies on landfilling, resulting in resource loss and greenhouse gas emissions. This study evaluated the technical, economic, and environmental feasibility of a mobile pyrolysis station for valorizing municipal tree leaf waste. Laboratory slow pyrolysis experiments were conducted at 350 °C for 2 h, producing 64.67% biochar, 6.67% bio-oil, and 28.67% non-condensable gases by weight. These findings guided the conceptual design of a truck-mounted mobile pyrolysis station integrating mass and energy balances, equipment sizing, process engineering, safety, techno-economic, and environmental evaluations. At an annual capacity of 1252.8 t of wet leaf biomass, the station produces approximately 622.4 t of biochar, 64.2 t of bio-oil, and 275.9 t of non-condensable gases. The total capital investment was estimated at USD 484,522. Three economic scenarios were evaluated. Under the high-price biochar scenario, using a selling price of USD 2.15 kg−1, the initial full-capacity annual revenue was USD 1.389 million, with a 10-year NPV of USD 6.19 million, an IRR of 155.1%, and payback of 0.81 years. Under the low-price biochar scenario, using a selling price of USD 1.075 kg−1, the NPV decreased to USD 2.11 million, the IRR decreased to 67.1%, and payback increased to 1.88 years. With the same low biochar price and a 50% increase in OPEX, the NPV remained positive at USD 1.22 million, with an IRR of 44.6% and payback of 2.64 years. The environmental assessment evaluated two biochar carbon storage cases. Using the full calculated carbon storage credit, the net annual environmental benefit was 7036.79 t CO2e, whereas a conservative 50% carbon storage sensitivity scenario provided a benefit of 6489.96 t CO2e compared with current landfill disposal practices. These findings support mobile pyrolysis as a technically feasible, economically resilient, and environmentally sustainable strategy for municipal tree leaf waste valorization in Saudi Arabia.
- Open Access
- 2 August 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Multi-objective risk-based power system expansion planning considering cascading physical attack propagation
- 2 August 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessMulti-objective risk-based power system expansion planning considering cascading physical attack propagation
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 101255-101273
Enhancing Anesthetic Precision Through Ejection Fraction- and Temperature-Informed Modeling
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 101255-101273
Open AccessEnhancing Anesthetic Precision Through Ejection Fraction- and Temperature-Informed Modeling
- Open Access
- 8 December 2025
- Published by Elsevier in Results in Engineering
- Vol. 29
Wearable electromyography (EMG) and accelerometer device based on human–computer interaction for tetraplegic users
- 8 December 2025
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessWearable electromyography (EMG) and accelerometer device based on human–computer interaction for tetraplegic users
- Open Access
- 29 August 2025
- Published by Frontiers Media SA in Frontiers in Medical Technology
- Vol. 7, 1630829
State machine design for an automated peritoneal dialysis machine
According to the National Library of Medicine (NLM), chronic kidney disease (CKD) affects more than 10% of the world's population, and peritoneal dialysis (PD) is one of the promising treatments. Despite the advantages of the current PD machine over alternative treatments, it has certain limitations, such as high consumable costs, lengthy daily sessions, and a lack of portability. This work aims to implement a finite state machine design to modify the process of an automated, economical PD system. The proposed optimized process includes a flush system stage, where tubes are rinsed before and after each session to avoid contamination. This design is intended for use by only one patient to prevent contamination. Furthermore, a turbidity sensor is added to measure the efficiency of the dialysis process and reduce the current dialysis time, which can reach eight hours. The finite state machine design is developed using LabVIEW software, featuring a user-friendly interface that allows users to track the process's progress.
- 29 August 2025
- Published by Frontiers Media SA in Frontiers in Medical Technology
- Vol. 7, 1630829
Open AccessState machine design for an automated peritoneal dialysis machine
According to the National Library of Medicine (NLM), chronic kidney disease (CKD) affects more than 10% of the world's population, and peritoneal dialysis (PD) is one of the promising treatments. Despite the advantages of the current PD machine over alternative treatments, it has certain limitations, such as high consumable costs, lengthy daily sessions, and a lack of portability. This work aims to implement a finite state machine design to modify the process of an automated, economical PD system. The proposed optimized process includes a flush system stage, where tubes are rinsed before and after each session to avoid contamination. This design is intended for use by only one patient to prevent contamination. Furthermore, a turbidity sensor is added to measure the efficiency of the dialysis process and reduce the current dialysis time, which can reach eight hours. The finite state machine design is developed using LabVIEW software, featuring a user-friendly interface that allows users to track the process's progress.
- Open Access
- 26 July 2025
- Published by MDPI AG in Mathematics
- Vol. 13 (15) , 2411
From Block-Oriented Models to the Koopman Operator: A Comprehensive Review on Data-Driven Chemical Reactor Modeling
Some chemical reactors exhibit coupled dynamics with multiple equilibrium points and strong nonlinearities. The accurate modeling of these dynamics is crucial to optimal control and increasing the reactor’s economic performance. While neural networks can effectively handle complex nonlinearities, they sacrifice interpretability. Alternatively, block-oriented Hammerstein–Wiener models and Koopman operator-based linear predictors combine nonlinear representation with linear dynamics, offering a gray-box identification approach. This paper comprehensively reviews recent advancements in both the Hammerstein–Wiener and Koopman operator methods and benchmarks their accuracy against neural network-based approaches to modeling a large-scale industrial Fluid Catalytic Cracking fractionator. Furthermore, Monte Carlo simulations are employed to validate performance under varying signal-to-noise ratios. The results demonstrate that the Koopman bilinear model significantly outperforms the other methods in terms of accuracy and robustness.
- 26 July 2025
- Published by MDPI AG in Mathematics
- Vol. 13 (15) , 2411
Open AccessFrom Block-Oriented Models to the Koopman Operator: A Comprehensive Review on Data-Driven Chemical Reactor Modeling
Some chemical reactors exhibit coupled dynamics with multiple equilibrium points and strong nonlinearities. The accurate modeling of these dynamics is crucial to optimal control and increasing the reactor’s economic performance. While neural networks can effectively handle complex nonlinearities, they sacrifice interpretability. Alternatively, block-oriented Hammerstein–Wiener models and Koopman operator-based linear predictors combine nonlinear representation with linear dynamics, offering a gray-box identification approach. This paper comprehensively reviews recent advancements in both the Hammerstein–Wiener and Koopman operator methods and benchmarks their accuracy against neural network-based approaches to modeling a large-scale industrial Fluid Catalytic Cracking fractionator. Furthermore, Monte Carlo simulations are employed to validate performance under varying signal-to-noise ratios. The results demonstrate that the Koopman bilinear model significantly outperforms the other methods in terms of accuracy and robustness.
- Open Access
- 10 May 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (10) , 4817
Identification of Wiener Box-Jenkins Model for Anesthesia Using Particle Swarm Optimization
Anesthesia refers to the process of preventing pain and relieving stress on the patient’s body during medical operations. Due to its vital importance in health care systems, the automation of anesthesia has gained a lot of interest in the past two decades and, for this purpose, several models of anesthesia are proposed in the literature. In this paper, a Wiener Box-Jenkins model, consisting of linear dynamics followed by a static polynomial nonlinearity and additive colored noise, is used to model anesthesia. A set of input–output data is generated using closed-loop simulations of the Pharmacokinetic–Pharmacodynamic nonlinear (PK/PD) model relating the drug infusion rates, in [μgkg−1min−1], to the Depth of Anesthesia (DoA), in [%]. The model parameters are then estimated offline using particle swarm optimization (PSO) technique. Several Monte Carlo simulations and validation tests are conducted to evaluate the performance of the identified model. The simulation showed very promising results with a quick convergence in less than 10 iterations, with a percentage error less than 1.5%.
- 10 May 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (10) , 4817
Open AccessIdentification of Wiener Box-Jenkins Model for Anesthesia Using Particle Swarm Optimization
Anesthesia refers to the process of preventing pain and relieving stress on the patient’s body during medical operations. Due to its vital importance in health care systems, the automation of anesthesia has gained a lot of interest in the past two decades and, for this purpose, several models of anesthesia are proposed in the literature. In this paper, a Wiener Box-Jenkins model, consisting of linear dynamics followed by a static polynomial nonlinearity and additive colored noise, is used to model anesthesia. A set of input–output data is generated using closed-loop simulations of the Pharmacokinetic–Pharmacodynamic nonlinear (PK/PD) model relating the drug infusion rates, in [μgkg−1min−1], to the Depth of Anesthesia (DoA), in [%]. The model parameters are then estimated offline using particle swarm optimization (PSO) technique. Several Monte Carlo simulations and validation tests are conducted to evaluate the performance of the identified model. The simulation showed very promising results with a quick convergence in less than 10 iterations, with a percentage error less than 1.5%.
- Open Access
- 30 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 1936-1945
Prediction of Blood Glucose Level Using Nonlinear System Identification Approach
Predicting the blood glucose level of type 1 diabetes mellitus of patients could prevent hypo/hyperglycemia incidents that are threats for the patients with this disease. A nonlinear system identification approach is proposed in this work to develop a mathematical model, which can be used to predict the blood glucose level over a given period with high accuracy. More specifically, the Hammerstein Box-Jenkins model is used to approximate the system, where two infinite impulse response filters represent the linear and noise processes, and a polynomial basis function represents the nonlinearity. The proposed identification method is based on the Steiglitz-McBride approach to predict the model parameters. Moreover, a simulation software licensed by the USA Food and Drug Administration that simulates the dynamics of the glucose-insulin system metabolism inside the body, called Type I Diabetes Metabolic Simulator (T1DMS), was used to generate the data. Thirty subjects of different age groups were considered, and the data was generated for a week with a sample per minute, i.e. 302430 data points. This data was then processed using a developed MATLAB code to predict the blood glucose level. Various scenarios were established to validate the proposed approach. The simulations showed very promising results with a very low average root mean square error of 1 mg/dl, which is seven times less compared to other prediction techniques. Other cost functions have also been used and they showed very good results. In the future, this approach can be embedded in closed-loop continuous blood glucose monitoring systems in order to give alerts to the patients and help in calculating the needed insulin dose.
- 30 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 1936-1945
Open AccessPrediction of Blood Glucose Level Using Nonlinear System Identification Approach
Predicting the blood glucose level of type 1 diabetes mellitus of patients could prevent hypo/hyperglycemia incidents that are threats for the patients with this disease. A nonlinear system identification approach is proposed in this work to develop a mathematical model, which can be used to predict the blood glucose level over a given period with high accuracy. More specifically, the Hammerstein Box-Jenkins model is used to approximate the system, where two infinite impulse response filters represent the linear and noise processes, and a polynomial basis function represents the nonlinearity. The proposed identification method is based on the Steiglitz-McBride approach to predict the model parameters. Moreover, a simulation software licensed by the USA Food and Drug Administration that simulates the dynamics of the glucose-insulin system metabolism inside the body, called Type I Diabetes Metabolic Simulator (T1DMS), was used to generate the data. Thirty subjects of different age groups were considered, and the data was generated for a week with a sample per minute, i.e. 302430 data points. This data was then processed using a developed MATLAB code to predict the blood glucose level. Various scenarios were established to validate the proposed approach. The simulations showed very promising results with a very low average root mean square error of 1 mg/dl, which is seven times less compared to other prediction techniques. Other cost functions have also been used and they showed very good results. In the future, this approach can be embedded in closed-loop continuous blood glucose monitoring systems in order to give alerts to the patients and help in calculating the needed insulin dose.