OSOleg Sukach

Oleg Sukach

*This is an algorithmically generated author record based on publicly available information.

Oleg Sukach has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • LUMINESCENT SPECTROSCOPY AND CHROMATOGRAPHY OF MILK THISTLE OIL OF DIFFERENT STORAGE PERIODS

    by S. Myagkota, R. Shevchuk, O. Sukach, O. Mazurak, I. Solovodzinska, O. Kushnir, T. Kokhana, N. Gloskovska, A. Pushak, J. Len, et al.

    The luminescence spectral properties of milk thistle oil obtained by cold pressing were studied over a storage period of up to two years. A high sensitivity of luminescence-active components of the oil (tocopherols, polyunsaturated fatty acids, vitamins, pigments, and oxidation products) to storage time under household conditions (in a refrigerator at +4 °C) was observed. It was established that storage for more than six months leads to oxidation and degradation of phenols, tocopherols, polyunsaturated (linoleic and linolenic) and monounsaturated (oleic) fatty acids, vitamins (B₂, E), the precursor of vitamin A (carotene), and the chlorophyll pigments. These processes are accompanied by a decrease in the intensity of luminescence bands of tocopherol-phenol group, polyunsaturated (linoleic, linolenic) and monounsaturated (oleic) fatty acids, vitamins (B₂, E), and chlorophyll pigment with characteristic peaks at λmax = 332, 390, 415, 515, 525, and 678 nm, along with changes in intensity and structure of the excitation spectra of these fluorophores. The decomposition and oxidation of phenols, tocopherols, polyunsaturated fatty acids, vitamins (B₂, E), carotene, and chlorophyll pigments are reflected by the appearance of luminescence bands with peaks at λmax = 370, 440, and 470 nm. The fatty acid composition of milk thistle oil of different storage durations was determined using gas chromatography. The results are consistent with those reported by other authors. Chromatographic analysis revealed a significant decrease in polyunsaturated linolenic acid (ω-3) and monounsaturated oleic acid (ω-9), indicating their effective oxidation during storage.

  • Open Access

    ОЦІНКА ПЛОЩІ ПЛЯМИ КОНТАКТУ ШИНИ НА ГРУНТОВИХ ПОВЕРХНЯХ

    by Петро Сивулька, Олег Сукач

    У статті проведено порівняльний аналіз відомих методик розрахунку плями контакту пневматичної шини колісних машин та опрацьовано пропозиції щодо умов взаємодії з опорними поверхнями, що деформуються. Класична оцінка-розрахунок площі плями контакту шини з опорною поверхнею базується на твердій бетонній поверхні – автодороги 1 категорії. Однак у аграрній та військовій сферах домінують ґрунтові поверхні, що змінює площу контакту. Проведено порівняльний аналіз відомих 3-х основних методик розрахунку площі плями контакту – вітчизняної (введеної в дію 1972 року) для автомобілів загального призначення, західноєвропейської у аграрній сфері та WES – методики військ НАТО. Для врахування зміни площі плями контакту шини на поверхнях, що деформуються з значним розмаїттям типів і фізико-механічних характеристик, запропоновано використання стандартного у WES – методиці показника твердості ґрунту як опорної поверхні колеса – конусного індексу СІ (cone index), що використовується для оперативної оцінки прохідності та мобільності руху автотехніки бездоріжжям. Окрім навантаження на колесо значну роль на формування площі контакту відіграє зміна тиску повітря в шині, що теж враховано на основі узагальнених даних щодо відповідної зміни радіальної деформації шини. Уточнення зміни площі плями контакту шини для конкретних типів і станів ґрунтів дозволяє провести більш коректну агроекологічну оцінку колісних тракторів та автомобілів у конкретних умовах руху. Ключові слова: ущільнення ґрунтів, автомобіль, трактор, колесо, пляма контакту, тиск, твердість ґрунту.


  • Luminescence spectral properties and chromatography of linseed oils with different storage periods

    by S. V. Myagkota, R. S. Shevchuk, O. M. Sukach, A. S. Pushak, N. V Gloskovska, J. T. Len, O. T. Mazurak, I. Y. Solovodzinska, H. Y. Uiheliy, O. V. Golubets, et al.

  • Open Access

    Identifying the influence of micro profile of rural roads on the durability of bus body when carrying passengers

    by Dmytro Ruban, Lybomyr Krainyk, Hanna Ruban, Stepan Khimka, Oleg Sukach, Vladyslav Khotunov, Viktor Shevchuk, Ihor Dufanets, Оlexandr Artyukh

    The object of this study is the durability of a bus body when passengers are transported on rural roads. According to the European classification, the total length of roads in Ukraine that correspond to the first category does not exceed 5 %. That is, all other 95 % of roads have a quality level that does not meet the regulatory operating conditions. In particular, in rural areas, buses are operated both on worn asphalt-concrete surfaces and on dirt and gravel roads. Such operating conditions additionally lead to intensive wear of buses and significantly worsen the durability of their bodies. The task to determine the influence of worn and dirt roads on the durability of the bus body during passenger transportation in rural areas could be solved by the durability assessment procedure proposed in this paper. The current work presents patterns that make it possible to predict the degradation of the bus body material that affect the durability of the body. The factors of influence during the operation of buses on rural routes have been substantiated and presented. The simulation results show that when operating buses on rural roads, cracks in the body frame of the body occur at runs that are 3.8–13.1 times less than under regulatory operating conditions. The proposed procedure for assessing the durability of a bus body when transporting passengers on rural roads makes it possible to predict the deterioration of the physical and mechanical properties of the elements of the bus body frame and take measures at the design stage to increase their reliability and durability


  • Open Access

    Estimation of fuel consumption in standard driving cycles and in real bus operation

    by Dmytro Ruban, Lybomyr Krainyk, Hanna Ruban, Viktor Shevchuk, Oleksandr Artyukh, Miron Mahats, Oleg Sukach, Vladyslav Khotunov

    The object of research is the basic fuel consumption of a bus in standard urban cycles and identical conditions in real operation. Standard driving cycles are used to estimate fuel consumption. This allows consumers to compare buses and choose the best one, and manufacturers in the process of improving buses also allow them to estimate fuel consumption. However, sometimes standards may not correspond to reality. Therefore, specific routes are developed for some cities, which requires significant development costs. This problem is solved by collecting reliable information on average fuel consumption with an operating period of 1 year and bus mileage of 40–90 thousand km. As a rule, operating organizations do not provide such information. The development of electronic control systems allows to obtain information from “black boxes” additionally installed by the manufacturer, which record information throughout the entire service life of the bus. This approach is implemented in this work. Existing standards for determining fuel consumption in urban driving cycles are presented. The results of modeling and real tests are presented. Information was collected from the “black boxes” on fuel consumption on 12 buses for 1 year of operation with mileage from 40 to 90 thousand km on Ataman A092N6 buses. Fuel consumption was 16.4–21.2 l/100 km when operating buses in one city (the manufacturer claims up to 23 l/100 km). This makes it possible to solve the problem of collecting reliable information on fuel consumption based on year-round operation of buses, which has not been carried out in this format before. The results of this study will allow operating organizations to see the real fuel consumption on Ataman A092N6 buses in the city. Implementation of this approach on other buses will allow obtaining data for interested organizations similarly. This will allow estimating fuel consumption without additional tests, which will reduce research costs.


  • Time dependencies of the spectral-luminescent properties of linseed oils

    by S. Myagkota, R. Shevchuk, O. Sukach, A. Pushak, J. Len, O. Mazurak, I. Solovodzinska, H. Uiheliy, O. Golubets, T. Malyy

  • Open Access

    ОБҐРУНТУВАННЯ ТА АПРОБАЦІЯ МЕТОДИКИ ВИЗНАЧЕННЯ ТЯГОВО-ЗЧІПНИХ ПОКАЗНИКІВ АВТОМОБІЛІВ

    by R. S. Shevchuk, O. M. Sukach, O. S. Myronyuk, V. V. Shevchuk

    Проблема. Опір коченню автомобілів визначається втратами енергії в колісному рушії, зокрема в шинах коліс, а також втратами на деформацію опорної поверхні, які сумарно характеризуються коефіцієнтом опору коченню f . На малій швидкості руху автомобілів, що не перевищує 10 – 15 км/год , цей коефіцієнт позначається f0 . Теоретичне визначення коефіцієнта опору коченню є складним й дає змогу отримати наближені результати, які потребують експериментального уточнення. Для визначення тягово-зчіпних показників автомобілів, зокрема коефіцієнтів опору коченню і зчеплення автомобілів, широко використовується спосіб буксирування, який може реалізуватись доволі простим пристроєм, оснащеним горизонтально розташованим динамометром та гнучким буксирним пасом. Вказаний пристрій характеризується великою похибкою визначення середнього зусилля буксирування, яка зумовлена мінливістю взаємодії колісних рушіїв з опорною поверхнею і, відповідно – низькою точністю визначення способом буксируванням як коефіцієнта зчеплення з опорною поверхнею, так і інших тягово-зчіпних показників, зокрема коефіцієнта опору коченню.Низька точність визначення тягово-зчіпних показників зумовлена широким рядом чинників. Найбільший вплив на точність вимірювання мають умови проведення досліджень: мікропрофіль й ухил дорожнього покриття, а також рівномірність руху трактора-тягача, що здійснює буксирування. Наступна група чинників зумовлена технологічними параметрами вимірювального пристрою, а також точністю й частотою фіксації даних динамометром. Інша група чинників – це похибки, що виникають через неточності дій чи особисті якості оператора.Мета. Відповідно до означеної проблеми запропоновано розробити методику автоматизованого визначення зусилля буксирування за допомогою тягового пристрою з використанням програмного модуля, що нівелює значну кількість похибок, притаманних візуальному спостереженню під час проведення експериментів. Здійснити модернізацію тягового пристрою та розробити програмний модуль, який забезпечує зміну дискретності вимірювання зусилля буксирування, відповідно до заданого оператором раціонального інтервалу. Аналіз останніх досліджень та публікацій. Для визначення параметрів взаємодії рушіїв з опорною поверхнею використовують різноманітні методи та обладнання [1, 2]. Станом на сьогодні існує декілька способів визначення коефіцієнтів опору коченню та зчеплення колісних рушіїв з дорогою [3, 4]. Їх умовно можна розділити таким чином: метод буксирування, вибіг автомобіля та застосування спеціального лабораторного обладнання (бігових барабанів тощо). Для визначення опору коченню шин розроблені стандарти [5, 6], у яких рекомендовано використовувати метод вибігу на спеціалізованих бігових барабанах, що забезпечує належну точність та відтворюваність досліджень. Однак, цей спосіб є малоінформативним у випадку випробування автомобілів в реальних експлуатаційних умовах на різноманітних дорожніх покриттях. Для цього більш доцільно застосовувати спосіб буксирування, що забезпечує належну ефективність експериментального визначення з коефіцієнта опору коченню та зчеплення колісних рушіїв автомобілів [6–9].Спосіб буксирування, як правило, реалізовується доволі простим пристроєм – динамометром, який з’єднаний...


  • Open Access

    Research of the modernized intake system of the gasoline engine

    by Myron Magats, Zenoviy Goshko, Yuriy Vagula, Анатолій Вікторович Ужва, Мирон Іванович Магац, Зиновій Орестович Гошко, Юрій Игорович Вагула

    Problem. In recent years, Ukraine has seen a sharp decline in ambient temperature, especially in the winter. Accordingly, this has a negative impact on the performance of car engines (difficult to start and prolonged warm-up), as the lion's share of private sector cars are parked in open areas and are subject to sudden temperature and humidity changes. Therefore, to partially solve this problem, our attention was focused on the air lines of the intake system of the gasoline engine, as this system is easily accessible and does not require significant design changes for its modernization. Goal. The purpose of the work is to ensure the ease of starting the gasoline engine and reduce the time to warm up. Methodology. Operation of the car in the conditions of the lowered temperatures, essentially promotes deterioration of its fuel economy. The basis of such a negative process of fuel consumption is incomplete combustion of the working mixture. And this is the deterioration of spraying and evaporation of fuel and increasing the duration of engine warm-up. At such low ambient temperatures, the effective operation of the car in a garage depends significantly on the method of its preparation (which should at a minimum cost of fuel and energy resources to ensure rapid and reliable engine start and accelerated warm-up). We decided to obtain thermal energy to heat the inlet air at no additional cost. This is the installation of a gasoline engine with a spark ignition of the incandescent coil in the intake air line, which will receive power from the battery. Such modernization of the system does not require major design changes and significant financial investments Unresolved issues remain to assess the effectiveness of the process of heating the air entering the combustion chamber of the engine to create a working mixture. It should be noted that the optimal heating of the engines is most appropriate to carry out (ie heating the coolant and oil in the engine lubrication system) not to the temperature of the operating thermal mode, but to the temperature that ensures its reliable start. Results. The scheme of connection of a heater of intake air in an onboard electric network of the car is presented. The results of the heat balance of the studied gasoline engine (using cold and heated air flow) during its heating are obtained. The optimum temperature of the warmed-up engine at which further economical operation of the car is possible is established. Originality. This spiral heater was first used to heat the intake air charge during the start-up and warm-up of a gasoline engine. Practical value. The developed heating equipment can be used for both gasoline and diesel internal combustion engines. It should be switched on only during engine start-up and warm-up.