Sooyoon Koh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sooyoon Koh has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Wonkook Kim
Department of Civil and Environmental Engineering, Pusan National University, Busan, Republic of Korea
3 shared publications - Seungil Baek
Department of Civil and Environmental Engineering, Pusan National University, Busan, Republic of Korea
2 shared publications - Ha-Young Choi
Department of Oceanography, Pusan National University, Busan 46241, Republic of Korea
1 shared publication - Hyo-Keun Jang
Department of Oceanography, Pusan National University, Busan 46241, Korea
1 shared publication - Jae Hyung Lee
South Sea Fisheries Research Institute, National Institute of Fisheries Science, Yeosu 59780, Republic of Korea
1 shared publication - Jaehun Ahn
Pusan National University
1 shared publication
Latest Publications
- Open Access
Non-Destructive Screening of Fly Ash and Slag Replacement Ratios in Hardened Cement Paste Using SWIR Reflectance Spectroscopy
Verifying the type and initial proportion of supplementary cementitious materials in hardened binders is relevant to the quality assessment of low-carbon construction materials. This study examined whether short-wave infrared (SWIR) reflectance spectroscopy can identify fly ash (FA) and slag (SL) and estimate their initial replacement ratios in ordinary Portland cement (OPC) paste. Spectra were acquired from 28-day-cured OPC–FA and OPC–SL series spanning 10–80% replacement, together with a pure-OPC reference. A two-stage framework combined nearest-centroid material-group classification with material-specific partial least-squares regression. The two series showed contrasting reflectance and derivative responses, with prominent shape differences near 1.9–2.1 μm. The selected regression ranges were 1350–2350 nm for FA and 1850–2050 nm for SL. Calibration mean absolute errors were 1.88 and 1.12 percentage points for FA and SL, respectively. Six separately prepared validation mixtures containing SCMs from different suppliers were all classified correctly; overall mean absolute error and root mean square error were 1.59 and 1.89 percentage points, respectively, with R2 = 0.9866. TG/DTG supplied complementary quantitative context. These results demonstrate initial composition screening in the investigated paste systems and provide a basis for extending spectral binder assessment to mortar and concrete.
Open AccessNon-Destructive Screening of Fly Ash and Slag Replacement Ratios in Hardened Cement Paste Using SWIR Reflectance Spectroscopy
Verifying the type and initial proportion of supplementary cementitious materials in hardened binders is relevant to the quality assessment of low-carbon construction materials. This study examined whether short-wave infrared (SWIR) reflectance spectroscopy can identify fly ash (FA) and slag (SL) and estimate their initial replacement ratios in ordinary Portland cement (OPC) paste. Spectra were acquired from 28-day-cured OPC–FA and OPC–SL series spanning 10–80% replacement, together with a pure-OPC reference. A two-stage framework combined nearest-centroid material-group classification with material-specific partial least-squares regression. The two series showed contrasting reflectance and derivative responses, with prominent shape differences near 1.9–2.1 μm. The selected regression ranges were 1350–2350 nm for FA and 1850–2050 nm for SL. Calibration mean absolute errors were 1.88 and 1.12 percentage points for FA and SL, respectively. Six separately prepared validation mixtures containing SCMs from different suppliers were all classified correctly; overall mean absolute error and root mean square error were 1.59 and 1.89 percentage points, respectively, with R2 = 0.9866. TG/DTG supplied complementary quantitative context. These results demonstrate initial composition screening in the investigated paste systems and provide a basis for extending spectral binder assessment to mortar and concrete.
- Open Access
HPLC-Based Detection of Two Distinct Red Tide Causative Species (Mesodinium rubrum and Margalefidinium polykrikoides) in the South Sea of Korea
Various approaches have been applied to red tide monitoring in Korea since reliable information on phytoplankton communities is crucial. In this study, we employed a high-performance liquid chromatography (HPLC) method to analyze two types of red tide, Mesodinium rubrum and Margalefidinium polykrikoides (also known as Cochlodinium polykrikoides), along the southern coasts of Korea. During the M. rubrum red tide on 8 August 2022, an unusual dominance of cryptophytes was observed, being the most dominant phytoplankton group. A significant positive correlation was found between alloxanthin concentrations, a marker pigment of cryptophytes, and M. rubrum cell numbers (p < 0.01, r = 0.830), indicating that HPLC-derived alloxanthin concentrations can serve as a valuable indicator for identifying red tides caused by M. rubrum and estimating cell numbers. However, it is crucial to consider the temporal dynamics of the prey–predator relationship between cryptophytes and M. rubrum. Further investigation is required to understand the environmental conditions that promote cryptophyte predominance and their role in M. rubrum red tide development. In the second field campaign on 29 August 2022, we observed a significant correlation between the concentration of peridinin, a marker pigment for dinoflagellates, and M. polykrikoides cell numbers (p < 0.01, r = 0.663), suggesting that peridinin can serve as a reliable indicator of M. polykrikoides red tides. In conclusion, HPLC-derived pigments, namely alloxanthin and peridinin, can be used to effectively monitor red tides caused by M. rubrum and M. polykrikoides, respectively. However, to overcome certain methodological limitations of HPLC, future studies should explore additional markers or analytical techniques capable of differentiating M. polykrikoides from other coexisting dinoflagellate species. Furthermore, the broad applicability of our method requires thorough investigation in diverse ecosystems to fully comprehend its scope and limitations. Future research should focus on evaluating the method’s efficacy in different contexts, accounting for the distinct traits of the ecosystems under consideration.
Open AccessHPLC-Based Detection of Two Distinct Red Tide Causative Species (Mesodinium rubrum and Margalefidinium polykrikoides) in the South Sea of Korea
Various approaches have been applied to red tide monitoring in Korea since reliable information on phytoplankton communities is crucial. In this study, we employed a high-performance liquid chromatography (HPLC) method to analyze two types of red tide, Mesodinium rubrum and Margalefidinium polykrikoides (also known as Cochlodinium polykrikoides), along the southern coasts of Korea. During the M. rubrum red tide on 8 August 2022, an unusual dominance of cryptophytes was observed, being the most dominant phytoplankton group. A significant positive correlation was found between alloxanthin concentrations, a marker pigment of cryptophytes, and M. rubrum cell numbers (p < 0.01, r = 0.830), indicating that HPLC-derived alloxanthin concentrations can serve as a valuable indicator for identifying red tides caused by M. rubrum and estimating cell numbers. However, it is crucial to consider the temporal dynamics of the prey–predator relationship between cryptophytes and M. rubrum. Further investigation is required to understand the environmental conditions that promote cryptophyte predominance and their role in M. rubrum red tide development. In the second field campaign on 29 August 2022, we observed a significant correlation between the concentration of peridinin, a marker pigment for dinoflagellates, and M. polykrikoides cell numbers (p < 0.01, r = 0.663), suggesting that peridinin can serve as a reliable indicator of M. polykrikoides red tides. In conclusion, HPLC-derived pigments, namely alloxanthin and peridinin, can be used to effectively monitor red tides caused by M. rubrum and M. polykrikoides, respectively. However, to overcome certain methodological limitations of HPLC, future studies should explore additional markers or analytical techniques capable of differentiating M. polykrikoides from other coexisting dinoflagellate species. Furthermore, the broad applicability of our method requires thorough investigation in diverse ecosystems to fully comprehend its scope and limitations. Future research should focus on evaluating the method’s efficacy in different contexts, accounting for the distinct traits of the ecosystems under consideration.
- Open Access
- 1 January 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (1) , 189
Hyperspectral Remote Sensing of TiO2 Concentration in Cementitious Material Based on Machine Learning Approaches
Titanium dioxide (TiO2) is a photocatalyst that can be used to remove nitrogen oxide (NOx). When applied to cementitious materials, it reacts with photons in sunlight or artificially generated light to reduce the concentration of particulate matter in the atmosphere. The concentration of TiO2 applied to the cementitious surface is difficult to quantify in a non-destructive manner after its application; however, knowledge of this residual amount is important for inspection and the evaluation of life expectancy. This study proposes a remote sensing technique that can estimate the concentration of TiO2 in the cementitious surface using a hyperspectral sensor. In the experiment, cement cores of varying TiO2 concentration and carbon contents were prepared and the surfaces were observed by TriOS RAMSES, a directional hyperspectral sensor. Machine-learning-based algorithms were then trained to estimate the TiO2 concentration under varying base material conditions. The results revealed that the best-performing algorithms produced TiO2 concentration estimates with a ~6% RMSE and a correlation close to 0.8. This study presents a robust machine learning model to estimate TiO2 and activated carbon concentration with high accuracy, which can be applied to abrasion monitoring of TiO2 and activated carbon in concrete structures.
- 1 January 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (1) , 189
Open AccessHyperspectral Remote Sensing of TiO2 Concentration in Cementitious Material Based on Machine Learning Approaches
Titanium dioxide (TiO2) is a photocatalyst that can be used to remove nitrogen oxide (NOx). When applied to cementitious materials, it reacts with photons in sunlight or artificially generated light to reduce the concentration of particulate matter in the atmosphere. The concentration of TiO2 applied to the cementitious surface is difficult to quantify in a non-destructive manner after its application; however, knowledge of this residual amount is important for inspection and the evaluation of life expectancy. This study proposes a remote sensing technique that can estimate the concentration of TiO2 in the cementitious surface using a hyperspectral sensor. In the experiment, cement cores of varying TiO2 concentration and carbon contents were prepared and the surfaces were observed by TriOS RAMSES, a directional hyperspectral sensor. Machine-learning-based algorithms were then trained to estimate the TiO2 concentration under varying base material conditions. The results revealed that the best-performing algorithms produced TiO2 concentration estimates with a ~6% RMSE and a correlation close to 0.8. This study presents a robust machine learning model to estimate TiO2 and activated carbon concentration with high accuracy, which can be applied to abrasion monitoring of TiO2 and activated carbon in concrete structures.