Beshoy Maher Hakeem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Beshoy Maher Hakeem has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Faek Hassona
Civil Engineering Department, Faculty of Engineering, El-Minia University, El-Minia, Egypt
2 shared publications - Abdelrahman A. Elsherief
Department of Civil Engineering Faculty of Engineering, Aswan University and Nahda University, Aswan and Beni Suef, Egypt
1 shared publication Ahmed Moussa Abu Bakr
Associate Professor in Civil Engineering Dept., Faculty of Engineering, Minia University
1 shared publicationFayek Abdel Kader Hassona
Professor, Civil Engineering Department, Faculty of Engineering - Minya University, Egypt
1 shared publicationFayek Hassona
Professor, Civil Engineering Department, Faculty of Engineering - Minya University, Egypt
1 shared publication- Fayek Hassona
El-Minia University
1 shared publication
Latest Publications
- Open Access
- 22 August 2024
- Published by Springer Nature in Research Square
Experimental Study to Improve the Strength of Expansive Soil in Egypt Using Different Percentage of Bitumen
Clayey soils naturally shrink and swell, which can have a major impact on buildings due to differential settlements. In semi-arid and arid regions of the world, expansive soils present a significant maintenance challenge for geotechnical practicing engineers. This paper investigates the effect of using six different percentages of bitumen to improve the properties of expansive soils in Egypt. Extensive soil samples were taken from three locations, including the 6th of October (Very high potential expansiveness), El-Mokatam area (High potential expansiveness), Abo-Tartor (El-Kharga, El-Wadi EL- Gedid) (Medium potential expansiveness). Each soil sample set is mixed with bitumen at percentages of 0%, 3%, 6%, 9%, 12%, and 15% by weight to generate six different mixtures. Testing was done on the classification, specific gravity, Atterberge limits, compaction properties, free swell, swelling potential, swell pressure, and compressive strength of the natural and treated soils. The results indicated that, when bitumen content was increased to 15%, the liquid limit decreased by 41.5%, 37.23%, and 35.21% for very high potential expansiveness, high potential expansiveness, and medium potential expansiveness, respectively. Also, free swell, swelling potential, and swell pressure decreased by 68%, 65.5%, and 70% for very high potential expansiveness when bitumen content was increased to 15%. For high potential expansiveness, free swell, swelling potential, and swell pressure decreased by 67.2%, 62.26%, and 45%. In addition, increasing bitumen percentage by 15%, decreased by 33.5%, 55%, and 31.43 for medium potential expansiveness. In this study, the effect of using bitumen on shear strength characteristics, optimum water content, max. dry density, swell limit, shrink limit, and shrink-swell limit for very high, high, medium potential expansiveness have been studied. It was concluded that bitumen stabilization using for improvement the properties of expansive soil in Egypt. Finally, a new set of correlation equations was proposed to estimate the swelling characteristics in relation to the bitumen addition percentage to expansive soil.
- 22 August 2024
- Published by Springer Nature in Research Square
Open AccessExperimental Study to Improve the Strength of Expansive Soil in Egypt Using Different Percentage of Bitumen
Clayey soils naturally shrink and swell, which can have a major impact on buildings due to differential settlements. In semi-arid and arid regions of the world, expansive soils present a significant maintenance challenge for geotechnical practicing engineers. This paper investigates the effect of using six different percentages of bitumen to improve the properties of expansive soils in Egypt. Extensive soil samples were taken from three locations, including the 6th of October (Very high potential expansiveness), El-Mokatam area (High potential expansiveness), Abo-Tartor (El-Kharga, El-Wadi EL- Gedid) (Medium potential expansiveness). Each soil sample set is mixed with bitumen at percentages of 0%, 3%, 6%, 9%, 12%, and 15% by weight to generate six different mixtures. Testing was done on the classification, specific gravity, Atterberge limits, compaction properties, free swell, swelling potential, swell pressure, and compressive strength of the natural and treated soils. The results indicated that, when bitumen content was increased to 15%, the liquid limit decreased by 41.5%, 37.23%, and 35.21% for very high potential expansiveness, high potential expansiveness, and medium potential expansiveness, respectively. Also, free swell, swelling potential, and swell pressure decreased by 68%, 65.5%, and 70% for very high potential expansiveness when bitumen content was increased to 15%. For high potential expansiveness, free swell, swelling potential, and swell pressure decreased by 67.2%, 62.26%, and 45%. In addition, increasing bitumen percentage by 15%, decreased by 33.5%, 55%, and 31.43 for medium potential expansiveness. In this study, the effect of using bitumen on shear strength characteristics, optimum water content, max. dry density, swell limit, shrink limit, and shrink-swell limit for very high, high, medium potential expansiveness have been studied. It was concluded that bitumen stabilization using for improvement the properties of expansive soil in Egypt. Finally, a new set of correlation equations was proposed to estimate the swelling characteristics in relation to the bitumen addition percentage to expansive soil.
- Open Access
- 30 May 2024
- Published by Springer Nature in Journal of Umm Al-Qura University for Engineering and Architecture
- Vol. 15 (4) , 486-502
Numerical modelling for stability of homogeneous clay and sand slopes improved by polyurethane foam piles in slope face
Polyurethane foam (P.U.) injection resin techniques have been widely used for slab crack repair, soil improvement, and structural crack repair over the past 20 years. In this study, numerical investigations were carried out to enhance the strength of both sand and clay soils via utilizing polyurethane foam as inclusion material. The investigation was conducted using ‘GeoStudio (SLOPE/W) 2D’ software to model 6 m high homogeneous slopes made of soft clay and medium sand with varying slope angles (25°, 30°, 35°) on same soil extended up to 9 m depth and with inclusion of polyurethane foam piles of varying diameter (0.5 m, 0.8 m), length (up to 10 m) and spacing (0.5 m, 1 m, 2 m) in the slope face. The numerical model was verified using experimental test results conducted by Hassona and Abdelnaeem (Physical and mechanical properties of polyurethane foam conditioned sand. MSc, Civil Engineering Department, Faculty of Engineering Minia University). The results revealed that, for slope angle, Ø = 30°, the factor of safety for clay soil increased when using polyurethane piles (diameter, 0.5 m and 10 m length) having spacing of two m, one m, half m, and when used as sheet piles, respectively. The factor of safety for clay soil increased significantly when using polyurethane piles (diameter, 0.8 m, and 10 m length) having spacing the same as before and as sheet piles having width of 0.5 and 0.8 m, respectively. Also, for medium dense sand soil, using polyurethane piles (diameter, 0.5 m and 10 m length) having spacing the same as before, and as sheet piles increased factor of safety much more than that for clay soil. In addition, for medium dense sand soil similar observation were noticed using polyurethane piles (diameter 0.8 m, and 10 m length) having spacing the same as before, and as sheet piles, respectively. In addition, the effects of slope angles also studied.
- 30 May 2024
- Published by Springer Nature in Journal of Umm Al-Qura University for Engineering and Architecture
- Vol. 15 (4) , 486-502
Open AccessNumerical modelling for stability of homogeneous clay and sand slopes improved by polyurethane foam piles in slope face
Polyurethane foam (P.U.) injection resin techniques have been widely used for slab crack repair, soil improvement, and structural crack repair over the past 20 years. In this study, numerical investigations were carried out to enhance the strength of both sand and clay soils via utilizing polyurethane foam as inclusion material. The investigation was conducted using ‘GeoStudio (SLOPE/W) 2D’ software to model 6 m high homogeneous slopes made of soft clay and medium sand with varying slope angles (25°, 30°, 35°) on same soil extended up to 9 m depth and with inclusion of polyurethane foam piles of varying diameter (0.5 m, 0.8 m), length (up to 10 m) and spacing (0.5 m, 1 m, 2 m) in the slope face. The numerical model was verified using experimental test results conducted by Hassona and Abdelnaeem (Physical and mechanical properties of polyurethane foam conditioned sand. MSc, Civil Engineering Department, Faculty of Engineering Minia University). The results revealed that, for slope angle, Ø = 30°, the factor of safety for clay soil increased when using polyurethane piles (diameter, 0.5 m and 10 m length) having spacing of two m, one m, half m, and when used as sheet piles, respectively. The factor of safety for clay soil increased significantly when using polyurethane piles (diameter, 0.8 m, and 10 m length) having spacing the same as before and as sheet piles having width of 0.5 and 0.8 m, respectively. Also, for medium dense sand soil, using polyurethane piles (diameter, 0.5 m and 10 m length) having spacing the same as before, and as sheet piles increased factor of safety much more than that for clay soil. In addition, for medium dense sand soil similar observation were noticed using polyurethane piles (diameter 0.8 m, and 10 m length) having spacing the same as before, and as sheet piles, respectively. In addition, the effects of slope angles also studied.
- Open Access
- 3 April 2024
- Published by Springer Nature in AI in Civil Engineering
- Vol. 3 (1) , 1-14
Improving the efficiency of isolated-footing resting on loose sand soil using grout diaphragm walls: an experimental and numerical study
In light of rising loads from several sources, including additional stories, eccentric loads, and increased live loads, foundations often face increased demands. To address this, horizontal reinforcements are now commonly positioned beneath footings to enhance the bearing capacity of the loose-dense sand subgrade. By grouting on both sides of the footing, not only can vertical settlement be minimized, but also the soil movement in the horizontal direction under the chosen loaded footing can be reduced. The objective of this study is to conduct extensive experimental work on twenty-one (21) soil models to assess the efficiency of a circular footing resting on granular soil injected with grout diaphragm walls. Specifically, this study investigated the bearing capacity of granular soil in relation to the breadth (b) and length (L) of grouted walls. The results showed that, installing grouted wall injection on both sides of the existing footing is an excellent method to improve the bearing capacity of the subgrade layer. To check the validity of the chosen computational processes, both PLAXIS (3D) software and a 2D Finite Element Program GeoStudio 2018 were used. The findings indicate a direct correlation with the experimental observations in that the reinforcement has a considerable effect on the bearing capacity of a circular-footing resting on granular soil.
- 3 April 2024
- Published by Springer Nature in AI in Civil Engineering
- Vol. 3 (1) , 1-14
Open AccessImproving the efficiency of isolated-footing resting on loose sand soil using grout diaphragm walls: an experimental and numerical study
In light of rising loads from several sources, including additional stories, eccentric loads, and increased live loads, foundations often face increased demands. To address this, horizontal reinforcements are now commonly positioned beneath footings to enhance the bearing capacity of the loose-dense sand subgrade. By grouting on both sides of the footing, not only can vertical settlement be minimized, but also the soil movement in the horizontal direction under the chosen loaded footing can be reduced. The objective of this study is to conduct extensive experimental work on twenty-one (21) soil models to assess the efficiency of a circular footing resting on granular soil injected with grout diaphragm walls. Specifically, this study investigated the bearing capacity of granular soil in relation to the breadth (b) and length (L) of grouted walls. The results showed that, installing grouted wall injection on both sides of the existing footing is an excellent method to improve the bearing capacity of the subgrade layer. To check the validity of the chosen computational processes, both PLAXIS (3D) software and a 2D Finite Element Program GeoStudio 2018 were used. The findings indicate a direct correlation with the experimental observations in that the reinforcement has a considerable effect on the bearing capacity of a circular-footing resting on granular soil.
- Open Access
- 16 January 2024
- Published by Springer Nature in Journal of Umm Al-Qura University for Engineering and Architecture
- Vol. 15 (2) , 78-92
Numerical investigation of the carrying capacity of single polyurethane foam pile in clay and sand soils
The definition of soil stabilization is a method to enhance the engineering properties. Polyurethane grout is one of the least expensive methods and can be used in construction. Polyurethane injection resin systems for crack injection, slab lifting, soil stabilization, leak sealing, and structural crack repair have been used for the last two decades. Polyurethane foam hasn't been used or understood as a loaded structural element in soils like as embedded piles. In this piece of work, a trial was made to numerically study the behavior of polyurethane foam when used as piles embedded in the clay and sand soils. Plaxis 3D software was adopted to carry out this study. Polyurethane piles of varying diameters and lengths were modelled as embedments in the clay and sand soil, and then incremental loads were applied. Moreover, the study involved the behavior of polyurethane piles when the clay strength was increased. The results indicated that embedded pile resistance to loading increased with the increase in length and pile diameter. When the loading results of polyurethane foam embedded in loose sand are compared with the loading results of piles in soft clay, the ultimate capacity of piles in loose sand, was much higher than that in soft clay. The results also indicated that the polyurethane pile load-carrying capacity increased when L/D ratio decreased for both soft and stiff clay. In this study concrete piles in clay and sand soil were modelled to examine the percentage of loading capacity of concrete piles to that of polyurethane piles for clay and sand soil.
- 16 January 2024
- Published by Springer Nature in Journal of Umm Al-Qura University for Engineering and Architecture
- Vol. 15 (2) , 78-92
Open AccessNumerical investigation of the carrying capacity of single polyurethane foam pile in clay and sand soils
The definition of soil stabilization is a method to enhance the engineering properties. Polyurethane grout is one of the least expensive methods and can be used in construction. Polyurethane injection resin systems for crack injection, slab lifting, soil stabilization, leak sealing, and structural crack repair have been used for the last two decades. Polyurethane foam hasn't been used or understood as a loaded structural element in soils like as embedded piles. In this piece of work, a trial was made to numerically study the behavior of polyurethane foam when used as piles embedded in the clay and sand soils. Plaxis 3D software was adopted to carry out this study. Polyurethane piles of varying diameters and lengths were modelled as embedments in the clay and sand soil, and then incremental loads were applied. Moreover, the study involved the behavior of polyurethane piles when the clay strength was increased. The results indicated that embedded pile resistance to loading increased with the increase in length and pile diameter. When the loading results of polyurethane foam embedded in loose sand are compared with the loading results of piles in soft clay, the ultimate capacity of piles in loose sand, was much higher than that in soft clay. The results also indicated that the polyurethane pile load-carrying capacity increased when L/D ratio decreased for both soft and stiff clay. In this study concrete piles in clay and sand soil were modelled to examine the percentage of loading capacity of concrete piles to that of polyurethane piles for clay and sand soil.
- 18 August 2023
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 16 (9) , 1-18
Experimental and finite-element study for improvement of the swelling characteristics of expansive soil in Egypt using coarse soil
- 18 August 2023
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 16 (9) , 1-18
Experimental and finite-element study for improvement of the swelling characteristics of expansive soil in Egypt using coarse soil
- 20 May 2022
- Published by Springer Nature in Asian Journal of Civil Engineering
- Vol. 23 (5) , 785-800
Experimental study and numerical modelling on the performance of circular footing resting on geogrid—reinforced granular soil bed
- 20 May 2022
- Published by Springer Nature in Asian Journal of Civil Engineering
- Vol. 23 (5) , 785-800
Experimental study and numerical modelling on the performance of circular footing resting on geogrid—reinforced granular soil bed
- 1 January 2022
- Published by Egyptian Knowledge Bank in Journal of Advanced Engineering Trends
- Vol. 42 (1) , 205-214
FINITE ELEMENT SIMULATIONS FOR SAND AND LIMESTONE POWDER OF DIFFERENT THERMAL CONDUCTIVITY
Thermal physical phenomenon of soils and rocks constitutes an important property for the planning of heat foundations and borehole heat exchange systems. To determine soil thermal properties considerable effort has gone into developing techniques in recent years. This paper attempts to simulate the effectiveness of using a soil with higher thermal conductivity compared to normal sand using GeoStudio 2018 Finite Element 2D program. GeoStudio was used to verify a physical laboratory model which was built to investigate the variation in soil temperature related to the proposed ambient temperature conditions [1]. In this research, two different backfilling soils were adopted to carry out this work. The results show excellent agreements between the laboratory model and numerical results. Ground temperature of sand backfill is affected by ambient temperature and reaches a constant value at depths below 1.0 m from ground surface. Limestone powder of higher thermal conductivity reaches a constant value at depths below 0.75 m from ground surface. The results show that using GeoStudio 2018 program to simulate the variation in soil temperature with depth for different types of soil is feasible.
- 1 January 2022
- Published by Egyptian Knowledge Bank in Journal of Advanced Engineering Trends
- Vol. 42 (1) , 205-214
FINITE ELEMENT SIMULATIONS FOR SAND AND LIMESTONE POWDER OF DIFFERENT THERMAL CONDUCTIVITY
Thermal physical phenomenon of soils and rocks constitutes an important property for the planning of heat foundations and borehole heat exchange systems. To determine soil thermal properties considerable effort has gone into developing techniques in recent years. This paper attempts to simulate the effectiveness of using a soil with higher thermal conductivity compared to normal sand using GeoStudio 2018 Finite Element 2D program. GeoStudio was used to verify a physical laboratory model which was built to investigate the variation in soil temperature related to the proposed ambient temperature conditions [1]. In this research, two different backfilling soils were adopted to carry out this work. The results show excellent agreements between the laboratory model and numerical results. Ground temperature of sand backfill is affected by ambient temperature and reaches a constant value at depths below 1.0 m from ground surface. Limestone powder of higher thermal conductivity reaches a constant value at depths below 0.75 m from ground surface. The results show that using GeoStudio 2018 program to simulate the variation in soil temperature with depth for different types of soil is feasible.
- 1 January 2022
- Published by Egyptian Knowledge Bank in Journal of Advanced Engineering Trends
- Vol. 42 (1) , 141-155
Finite element simulation of piled raft capacity under different loading conditions
In the general design of piled raft foundations, total loads are assumed to be taken by the pile. The contact pressure between raft and the soil is neglected. This may lead to loading piles with larger loads than they should be which could be reduced by sharing it with soil on which the raft is based. In this study, a trial was made to separate the amount of load carried by piles and that carried by soil. This was achieved by elevating raft one meter above ground surface. 3D finite element program PLAXIS 3D was used to simulate this case. In this paper, the effect of different parameters on carrying capacity of the piled raft were taken into consideration, such as pile spacing, pile diameter and raft thickness. Finally, to introduce an economical design for piled raft foundation, the settlement reduction ratio (SRR) and load sharing ratio of piles (αpr) were determined. The numerical results showed that the load carry by soil increases with the increases of pile spacing. In case of elevated piled raft, the load carried by piles was constant, although the pile spacing was increased under the raft thickness and pile diameter are constant. The discussion of results shows that the load carried by soil ranges from 7-14% of the total load, and maximum settlement at the elevated piled raft was higher than the maximum settlement at piled raft rested on soil with different pile spacing.
- 1 January 2022
- Published by Egyptian Knowledge Bank in Journal of Advanced Engineering Trends
- Vol. 42 (1) , 141-155
Finite element simulation of piled raft capacity under different loading conditions
In the general design of piled raft foundations, total loads are assumed to be taken by the pile. The contact pressure between raft and the soil is neglected. This may lead to loading piles with larger loads than they should be which could be reduced by sharing it with soil on which the raft is based. In this study, a trial was made to separate the amount of load carried by piles and that carried by soil. This was achieved by elevating raft one meter above ground surface. 3D finite element program PLAXIS 3D was used to simulate this case. In this paper, the effect of different parameters on carrying capacity of the piled raft were taken into consideration, such as pile spacing, pile diameter and raft thickness. Finally, to introduce an economical design for piled raft foundation, the settlement reduction ratio (SRR) and load sharing ratio of piles (αpr) were determined. The numerical results showed that the load carry by soil increases with the increases of pile spacing. In case of elevated piled raft, the load carried by piles was constant, although the pile spacing was increased under the raft thickness and pile diameter are constant. The discussion of results shows that the load carried by soil ranges from 7-14% of the total load, and maximum settlement at the elevated piled raft was higher than the maximum settlement at piled raft rested on soil with different pile spacing.
- 12 July 2017
- Published by Springer Nature
- p. 8-23
Characterization of Unsaturated Shrink-Swell Soils Properties in Egypt
- 12 July 2017
- Published by Springer Nature
- p. 8-23
Characterization of Unsaturated Shrink-Swell Soils Properties in Egypt