Mengke Qiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mengke Qiao has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Xiangcheng Li
Wuhan University of Science and Technology
8 shared publications Pingan Chen
Key Laboratory of High Temperature Electromagnetic Materials and Structure of MOE Wuhan University of Science and Technology Wuhan 430081 P. R. China
4 shared publicationsYingli Zhu
Key Laboratory of High Temperature Electromagnetic Materials and Structure of MOE Wuhan University of Science and Technology Wuhan 430081 P. R. China
4 shared publications- Xianzhao Yang
School of Electronic Information Wuhan University of Science and Technology Wuhan China
3 shared publications Xiangcheng Li
2 shared publicationsBoquan Zhu
1 shared publication
Latest Publications
- Open Access
- 8 October 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (12)
Strain-induced defects suppress conductivity to enhance microwave absorption in high-entropy hollow microspheres
Carbon-based materials are extensively utilized for electromagnetic wave (EMW) absorption due to their low density and high stability. However, their absorption capacity is often hindered by impedance mismatch originating from high intrinsic conductivity. Here, we synthesize high-entropy carbide nanoparticles with in-situ growth on hollow carbon spheres (HECs@HCSs) to form core-shell composites via entropy engineering. The results show that the high configurational entropy in the carbides leads to an expansion of the HEC lattice constant from 4.309 to 4.401 Å, yielding a great lattice strain from 3.55% to 13.45%. The atomic-scale strain field promotes defect formation and suppresses the long-range ordering of the carbon matrix, leading to the disruption of the conductive carbon network. Together with enhanced carrier scattering and interfacial transport barriers, the electrical conductivity decreases from 20.46 to 0.27 S/m. As a result, the HECs@HCSs composites exhibit outstanding microwave absorption with an effective absorption bandwidth of 7.24 GHz at 1.81 mm and a minimum reflection loss of −45.28 dB at 1.89 mm. Furthermore, radar cross-section simulations demonstrate that the HEC5 coating reduces the monostatic radar cross-section (RCS) by 18.85 dB·m2 relative to the bare perfect electric conductor (PEC) plate at normal incidence, confirming its excellent radar stealth capability. The superior EMW absorption properties are attributed to the enhanced impedance matching and the mechanistic transition from conduction loss to polarization relaxation. This work provides novel design insights and theoretical criteria for developing lightweight, wideband, and high-efficiency EMW absorbing protection materials.
- 8 October 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (12)
Open AccessStrain-induced defects suppress conductivity to enhance microwave absorption in high-entropy hollow microspheres
Carbon-based materials are extensively utilized for electromagnetic wave (EMW) absorption due to their low density and high stability. However, their absorption capacity is often hindered by impedance mismatch originating from high intrinsic conductivity. Here, we synthesize high-entropy carbide nanoparticles with in-situ growth on hollow carbon spheres (HECs@HCSs) to form core-shell composites via entropy engineering. The results show that the high configurational entropy in the carbides leads to an expansion of the HEC lattice constant from 4.309 to 4.401 Å, yielding a great lattice strain from 3.55% to 13.45%. The atomic-scale strain field promotes defect formation and suppresses the long-range ordering of the carbon matrix, leading to the disruption of the conductive carbon network. Together with enhanced carrier scattering and interfacial transport barriers, the electrical conductivity decreases from 20.46 to 0.27 S/m. As a result, the HECs@HCSs composites exhibit outstanding microwave absorption with an effective absorption bandwidth of 7.24 GHz at 1.81 mm and a minimum reflection loss of −45.28 dB at 1.89 mm. Furthermore, radar cross-section simulations demonstrate that the HEC5 coating reduces the monostatic radar cross-section (RCS) by 18.85 dB·m2 relative to the bare perfect electric conductor (PEC) plate at normal incidence, confirming its excellent radar stealth capability. The superior EMW absorption properties are attributed to the enhanced impedance matching and the mechanistic transition from conduction loss to polarization relaxation. This work provides novel design insights and theoretical criteria for developing lightweight, wideband, and high-efficiency EMW absorbing protection materials.
- 26 August 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (17)
Design of a Broadband Metamaterial Absorber Based on Multilayer Resistive Films
The rapid development of stealth technologies and electromagnetic interference (EMI) suppression systems has created an urgent need for radar‐absorbing materials with broadband and wide‐angle stability in the C and X bands. However, conventional absorbers are limited by inadequate impedance matching, high reflection loss, and complex fabrication processes. To address these issues, this study proposes a broadband metamaterial absorber based on resistive films. The structure is constructed by alternately arranging three layers of resistive films and three layers of SiO 2 dielectric substrates from top to bottom, which has a metallic backing plate placed at the bottom. Although the patterns of the three resistive films are all designed as square apertures, the structural parameters of each layer are optimized independently, resulting in different dimensions. Simulations show good polarization insensitivity from 0° to 80° under both TE and TM modes. Incident angle stability is maintained within 0°–45° under TE mode and 0°–65° under TM mode. Equivalent circuit analysis reveals that the synergistic effect of Ohmic loss and polarization loss enables over 90% absorptivity from 4 to 12 GHz. Therefore, the proposed metamaterial absorber provides a feasible pathway for broadband, wide‐angle stealth and EMI suppression in the C and X bands.
- 26 August 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (17)
Design of a Broadband Metamaterial Absorber Based on Multilayer Resistive Films
The rapid development of stealth technologies and electromagnetic interference (EMI) suppression systems has created an urgent need for radar‐absorbing materials with broadband and wide‐angle stability in the C and X bands. However, conventional absorbers are limited by inadequate impedance matching, high reflection loss, and complex fabrication processes. To address these issues, this study proposes a broadband metamaterial absorber based on resistive films. The structure is constructed by alternately arranging three layers of resistive films and three layers of SiO 2 dielectric substrates from top to bottom, which has a metallic backing plate placed at the bottom. Although the patterns of the three resistive films are all designed as square apertures, the structural parameters of each layer are optimized independently, resulting in different dimensions. Simulations show good polarization insensitivity from 0° to 80° under both TE and TM modes. Incident angle stability is maintained within 0°–45° under TE mode and 0°–65° under TM mode. Equivalent circuit analysis reveals that the synergistic effect of Ohmic loss and polarization loss enables over 90% absorptivity from 4 to 12 GHz. Therefore, the proposed metamaterial absorber provides a feasible pathway for broadband, wide‐angle stealth and EMI suppression in the C and X bands.
- 6 July 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (24) , 41654-41664
Effect of alumina with different particle sizes on the high-temperature properties of alumina-based castables
- 6 July 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (24) , 41654-41664
Effect of alumina with different particle sizes on the high-temperature properties of alumina-based castables
- 10 March 2026
- Published by Wiley in Physica Status Solidi (b)
- Vol. 263 (3)
Fourfold Rotational Symmetry Structure Metamaterial Microwave Absorber with Low Thickness/Bandwidth Ratio
This article designs a novel frequency selective surface (FSS) microwavemetamaterial absorber with a fourfold rotational symmetry structure to tackle the challenges of narrow absorption bandwidth and large thickness in metamaterial absorbers. The surface of this absorber is composed of conductive paste, with its intermediate layer being a dual‐layer structure of SiO 2 and Al 2 O 3 . Simulation and optimization results demonstrate that due to the combined effects of ohmic loss and resonance loss, the metamaterial absorber achieves a reflection loss (RL) of less than −10 dB over the X and Ku bands (8–18 GHz) with a thickness/bandwidth ratio of 0.266. The measured RL of the fabricated absorber matches well with the simulation results. This FSS metamaterial absorber thus provides an effective solution for reducing the thickness and weight of radar‐absorbing materials for the X and Ku bands in the field of electromagnetic stealth.
- 10 March 2026
- Published by Wiley in Physica Status Solidi (b)
- Vol. 263 (3)
Fourfold Rotational Symmetry Structure Metamaterial Microwave Absorber with Low Thickness/Bandwidth Ratio
This article designs a novel frequency selective surface (FSS) microwavemetamaterial absorber with a fourfold rotational symmetry structure to tackle the challenges of narrow absorption bandwidth and large thickness in metamaterial absorbers. The surface of this absorber is composed of conductive paste, with its intermediate layer being a dual‐layer structure of SiO 2 and Al 2 O 3 . Simulation and optimization results demonstrate that due to the combined effects of ohmic loss and resonance loss, the metamaterial absorber achieves a reflection loss (RL) of less than −10 dB over the X and Ku bands (8–18 GHz) with a thickness/bandwidth ratio of 0.266. The measured RL of the fabricated absorber matches well with the simulation results. This FSS metamaterial absorber thus provides an effective solution for reducing the thickness and weight of radar‐absorbing materials for the X and Ku bands in the field of electromagnetic stealth.
- 21 June 2025
- Published by Wiley in Physica Status Solidi (b)
- Vol. 262 (11)
Capacitive Frequency‐Selective Surfaces Metamaterial Design and Microwave Absorption Characterization for 2–8 GHz Applications
The article designs a novel low‐frequency metamaterial absorber based on frequency‐selective surfaces (FSS) to address the balance of performance and structural thickness of low‐frequency electromagnetic wave absorbers. In addition, its performance mechanisms are thoroughly investigated. The proposed absorber comprises three primary layers: resistive ink, lossy dielectric, and metal backplane. The FSS design is guided by simulated equivalent circuit theory with structural parameters optimized using the Trust Region Framework. Simulation results demonstrate that the absorber achieves a reflection loss ( RL ) < −2 dB at 2 GHz and less than −4 dB across the entire C‐band, with a total thickness of only 2 mm. Further analysis of the physical mechanisms reveals that the absorber's excellent performance is primarily attributed to the capacitive components of the FSS. Experimental measurements align with simulation results, showing over 90% agreement. This study provides an effective design methodology for developing thin electromagnetic wave absorbers, offering promising prospects for applications in compact electronic systems.
- 21 June 2025
- Published by Wiley in Physica Status Solidi (b)
- Vol. 262 (11)
Capacitive Frequency‐Selective Surfaces Metamaterial Design and Microwave Absorption Characterization for 2–8 GHz Applications
The article designs a novel low‐frequency metamaterial absorber based on frequency‐selective surfaces (FSS) to address the balance of performance and structural thickness of low‐frequency electromagnetic wave absorbers. In addition, its performance mechanisms are thoroughly investigated. The proposed absorber comprises three primary layers: resistive ink, lossy dielectric, and metal backplane. The FSS design is guided by simulated equivalent circuit theory with structural parameters optimized using the Trust Region Framework. Simulation results demonstrate that the absorber achieves a reflection loss ( RL ) < −2 dB at 2 GHz and less than −4 dB across the entire C‐band, with a total thickness of only 2 mm. Further analysis of the physical mechanisms reveals that the absorber's excellent performance is primarily attributed to the capacitive components of the FSS. Experimental measurements align with simulation results, showing over 90% agreement. This study provides an effective design methodology for developing thin electromagnetic wave absorbers, offering promising prospects for applications in compact electronic systems.
- 15 June 2025
- Published by Wiley in Physica Status Solidi (a)
- Vol. 222 (13)
Design and Preparation of Au‐Al2O3 Metamaterials Compatible with Infrared Radiation Suppression and Microwave Transparency
Infrared radiation suppression and microwave transparency compatible metamaterials play a crucial role in controlling the temperature of communication equipment and ensuring effective signal transmission. In this article, the infrared spectral response of the Au‐Al2O3 metamaterial structure is simulated using the finite difference time domain method. The influence of the edge electric field distribution within the Au‐Al2O3 metamaterial pattern on the infrared spectra characteristics is designed and analyzed. The infrared reflectivity and the peak value of the designed Au‐Al2O3 metamaterial structure within the range of 3–14 μm exceed 83.80% and reach 91.70%. Meanwhile, the microwave transmittance remains above 90%. When heated to 300 °C, the radiative temperature is merely 70.5 °C, demonstrating excellent ability to reduce the radiation temperature and infrared radiation suppression effects. This is attributed to the forced vibration of free electrons induced by incident electromagnetic waves on the metal surface. This article provides a novel method for the design of infrared radiation suppression and high microwave transmittance compatible metamaterials.
- 15 June 2025
- Published by Wiley in Physica Status Solidi (a)
- Vol. 222 (13)
Design and Preparation of Au‐Al2O3 Metamaterials Compatible with Infrared Radiation Suppression and Microwave Transparency
Infrared radiation suppression and microwave transparency compatible metamaterials play a crucial role in controlling the temperature of communication equipment and ensuring effective signal transmission. In this article, the infrared spectral response of the Au‐Al2O3 metamaterial structure is simulated using the finite difference time domain method. The influence of the edge electric field distribution within the Au‐Al2O3 metamaterial pattern on the infrared spectra characteristics is designed and analyzed. The infrared reflectivity and the peak value of the designed Au‐Al2O3 metamaterial structure within the range of 3–14 μm exceed 83.80% and reach 91.70%. Meanwhile, the microwave transmittance remains above 90%. When heated to 300 °C, the radiative temperature is merely 70.5 °C, demonstrating excellent ability to reduce the radiation temperature and infrared radiation suppression effects. This is attributed to the forced vibration of free electrons induced by incident electromagnetic waves on the metal surface. This article provides a novel method for the design of infrared radiation suppression and high microwave transmittance compatible metamaterials.
- Open Access
- 2 April 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (13)
Design and preparation of square ring electromagnetic energy conversion absorber based on lumped resistance
Absorbing metamaterials loaded with lumped elements exhibit high absorptivity across a wide absorption band, effectively addressing electromagnetic interference and other problems. However, conventional absorbing metamaterials often dissipate electromagnetic energy directly, leading to energy wastage. In this paper, three square-ring absorbers based on lumped resistance are designed, which consist of a metal ground, a F4B dielectric layer, and a surface metal layer with loaded lumped resistors. The load of lumped resistors is intended to enhance the impedance matching performance. In order to enhance the electromagnetic wave absorption, an equivalent circuit model of the metamaterial absorber is established to optimize the circuit parameters. The surface resistors are adjusted to 30–240 Ω, resulting in resonance peaks at 2, 4, and 6 GHz, respectively, and the absorptivity is greater than 90% at different resonant peaks. The simulation and experimental results demonstrate that the metamaterial absorber mainly absorbs electromagnetic waves through ohmic loss. Finally, the absorption performance of the metamaterial is verified by calculating the electromagnetic energy conversion efficiency, and the experimental results agree well with the simulated results.
- 2 April 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (13)
Open AccessDesign and preparation of square ring electromagnetic energy conversion absorber based on lumped resistance
Absorbing metamaterials loaded with lumped elements exhibit high absorptivity across a wide absorption band, effectively addressing electromagnetic interference and other problems. However, conventional absorbing metamaterials often dissipate electromagnetic energy directly, leading to energy wastage. In this paper, three square-ring absorbers based on lumped resistance are designed, which consist of a metal ground, a F4B dielectric layer, and a surface metal layer with loaded lumped resistors. The load of lumped resistors is intended to enhance the impedance matching performance. In order to enhance the electromagnetic wave absorption, an equivalent circuit model of the metamaterial absorber is established to optimize the circuit parameters. The surface resistors are adjusted to 30–240 Ω, resulting in resonance peaks at 2, 4, and 6 GHz, respectively, and the absorptivity is greater than 90% at different resonant peaks. The simulation and experimental results demonstrate that the metamaterial absorber mainly absorbs electromagnetic waves through ohmic loss. Finally, the absorption performance of the metamaterial is verified by calculating the electromagnetic energy conversion efficiency, and the experimental results agree well with the simulated results.
- 17 January 2023
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 17 (4)
Multioctagonal Ring Metamaterial with Broadband Microwave Absorption at Elevated Temperature
Excellent thermostable performance is the basis for the further development of microwave absorbing materials in the field of military stealth. Herein, a high‐temperature metamaterial absorber (HMA) with high impedance patterns (multi‐octagonal‐rings), two quartz (SiO2) layers, and a metallic ground film is designed and simulated. The optimal structural parameters are obtained by optimizing the circuit parameters and the size of HMA. The interaction of electric and magnetic resonance in multioctagonal rings results in a wide absorption bandwidth and excellent absorption performance. The experimental results show that the structure has good impedance matching performance, and the effective absorption bandwidth (−10 dB) (EAB) of the structure can reach 10.6 GHz from room temperature to 700 °C under the combined effect of resonance loss and ohmic loss.
- 17 January 2023
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 17 (4)
Multioctagonal Ring Metamaterial with Broadband Microwave Absorption at Elevated Temperature
Excellent thermostable performance is the basis for the further development of microwave absorbing materials in the field of military stealth. Herein, a high‐temperature metamaterial absorber (HMA) with high impedance patterns (multi‐octagonal‐rings), two quartz (SiO2) layers, and a metallic ground film is designed and simulated. The optimal structural parameters are obtained by optimizing the circuit parameters and the size of HMA. The interaction of electric and magnetic resonance in multioctagonal rings results in a wide absorption bandwidth and excellent absorption performance. The experimental results show that the structure has good impedance matching performance, and the effective absorption bandwidth (−10 dB) (EAB) of the structure can reach 10.6 GHz from room temperature to 700 °C under the combined effect of resonance loss and ohmic loss.
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (3) , 576-580
Ultralow Thickness-Bandwidth Ratio Magnetic Absorber With Printed FSS for S&C Bands
The thickness-bandwidth ratio (T-BR, d : λ max − λ min ) is an important evaluation factor for designing a thin broadband absorber. In this letter, an ultralow T-BR magnetic absorber using frequency selective surfaces (FSS) is designed aiming at the S&C bands. We add a superstrate and a substrate both made of magnetic material and printed the FSS pattern with resistive ink. By optimizing the circuit parameters of the lumped elements and the size of the unit cell of the FSS pattern, the proposed absorber provides 120% bandwidth of −10 dB reflectivity level in the S&C bands (2 GHz–8 GHz), whereas its thickness is only 0.033 λL (5 mm). The T-BR of the proposed absorber is 0.044, which is much lower than that of most absorbers reported works. In addition, the proposed absorber also has the characteristics of radar cross section reduction at different angles. The fabricated absorber proves that the measured results match well with the simulation results.
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (3) , 576-580
Ultralow Thickness-Bandwidth Ratio Magnetic Absorber With Printed FSS for S&C Bands
The thickness-bandwidth ratio (T-BR, d : λ max − λ min ) is an important evaluation factor for designing a thin broadband absorber. In this letter, an ultralow T-BR magnetic absorber using frequency selective surfaces (FSS) is designed aiming at the S&C bands. We add a superstrate and a substrate both made of magnetic material and printed the FSS pattern with resistive ink. By optimizing the circuit parameters of the lumped elements and the size of the unit cell of the FSS pattern, the proposed absorber provides 120% bandwidth of −10 dB reflectivity level in the S&C bands (2 GHz–8 GHz), whereas its thickness is only 0.033 λL (5 mm). The T-BR of the proposed absorber is 0.044, which is much lower than that of most absorbers reported works. In addition, the proposed absorber also has the characteristics of radar cross section reduction at different angles. The fabricated absorber proves that the measured results match well with the simulation results.