Priya Kumari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Priya Kumari has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
Sushrut Das
Department of Electronics Engineering Indian Institute of Technology (ISM) Dhanbad Dhanbad Jharkhand India
2 shared publications- Sushrut Das
Department of Electronics Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, India
1 shared publication
Latest Publications
- 29 October 2024
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 66 (11)
Isolation improvement between two tightly coupled QMSIW MIMO antenna elements using spoof surface plasmon polariton structure
A spoof surface plasmon polariton superstrate structure‐based decoupling method is proposed in this paper to reduce mutual coupling between two tightly coupled quarter‐mode substrate integrated waveguide antenna elements. This superstrate is a periodic structure suspended over the antenna elements with an inter‐element spacing of 0.02 λ0 (1 mm) at 6 GHz. It has been demonstrated that the isolation can be improved from 6.5 dB to more than 39 dB within the operation band in measurement. Further, it has been shown that the proposed method can improve both the total efficiency (by 25%) and gain (1.4 dBi) of the multiple‐input multiple‐output antenna.
- 29 October 2024
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 66 (11)
Isolation improvement between two tightly coupled QMSIW MIMO antenna elements using spoof surface plasmon polariton structure
A spoof surface plasmon polariton superstrate structure‐based decoupling method is proposed in this paper to reduce mutual coupling between two tightly coupled quarter‐mode substrate integrated waveguide antenna elements. This superstrate is a periodic structure suspended over the antenna elements with an inter‐element spacing of 0.02 λ0 (1 mm) at 6 GHz. It has been demonstrated that the isolation can be improved from 6.5 dB to more than 39 dB within the operation band in measurement. Further, it has been shown that the proposed method can improve both the total efficiency (by 25%) and gain (1.4 dBi) of the multiple‐input multiple‐output antenna.
- 20 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 2979-2983
A Wideband Circularly Polarized SIW MIMO Antenna Based on Coupled QMSIW and EMSIW Resonators for Sub-6 GHz 5G Applications
A substrate integrated waveguide (SIW) based circularly polarized (CP) multiple-input multiple-output (MIMO) antenna is proposed in this letter for Sub-6 GHz 5G applications. Each element of the MIMO antenna is made up of coupled quarter-mode substrate integrated waveguide (QMSIW) and eighth-mode substrate integrated waveguide (EMSIW) resonators, and these coupled resonators initiate the formation of the CP wave. An elliptical slot, etched on the common ground plane, provides the desired impedance and CP bandwidth. A T-shape ground slot has been used to enhance the port isolation (>21 dB) over the operating bandwidth. According to the measured data, the MIMO antenna possesses a 10-dB return loss bandwidth of 12.5% (5.25-5.95 GHz) and a 3-dB axial ratio bandwidth of 10.8% (5.25-5.85 GHz). Thus, the axial ratio (AR) bandwidth almost overlaps the return loss bandwidth. Moreover, different MIMO performance metrics are also analyzed.
- 20 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 2979-2983
A Wideband Circularly Polarized SIW MIMO Antenna Based on Coupled QMSIW and EMSIW Resonators for Sub-6 GHz 5G Applications
A substrate integrated waveguide (SIW) based circularly polarized (CP) multiple-input multiple-output (MIMO) antenna is proposed in this letter for Sub-6 GHz 5G applications. Each element of the MIMO antenna is made up of coupled quarter-mode substrate integrated waveguide (QMSIW) and eighth-mode substrate integrated waveguide (EMSIW) resonators, and these coupled resonators initiate the formation of the CP wave. An elliptical slot, etched on the common ground plane, provides the desired impedance and CP bandwidth. A T-shape ground slot has been used to enhance the port isolation (>21 dB) over the operating bandwidth. According to the measured data, the MIMO antenna possesses a 10-dB return loss bandwidth of 12.5% (5.25-5.95 GHz) and a 3-dB axial ratio bandwidth of 10.8% (5.25-5.85 GHz). Thus, the axial ratio (AR) bandwidth almost overlaps the return loss bandwidth. Moreover, different MIMO performance metrics are also analyzed.
- Open Access
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 1339-1345
A MIMO Antenna System Using Self-Decoupled EMSIW Dual-Beam Antenna Elements
This paper presents a two-element MIMO antenna system using two dual-beam EMSIW antenna elements. The dual-beam pattern is achieved by creating two weak field areas using EMSIW. The antenna elements are placed in the weak field areas of each other, which results in −31.65 dB measured isolation between the two adjacent antenna elements. Different scenarios for the placement of the elements are predicted, one case is illustrated in this paper. The high isolation, omission of decoupling networks, and use of dual-beam antenna element make the antenna simple, compact, and suitable for MIMO applications.
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 1339-1345
Open AccessA MIMO Antenna System Using Self-Decoupled EMSIW Dual-Beam Antenna Elements
This paper presents a two-element MIMO antenna system using two dual-beam EMSIW antenna elements. The dual-beam pattern is achieved by creating two weak field areas using EMSIW. The antenna elements are placed in the weak field areas of each other, which results in −31.65 dB measured isolation between the two adjacent antenna elements. Different scenarios for the placement of the elements are predicted, one case is illustrated in this paper. The high isolation, omission of decoupling networks, and use of dual-beam antenna element make the antenna simple, compact, and suitable for MIMO applications.