Suhaib Ahmad Khan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Suhaib Ahmad Khan has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Mohd Tariq
Aligarh Muslim University
4 shared publications - Asfar Ali Khan
Department of Electrical Engineering, ZHCET, Aligarh Muslim University, Aligarh 202002, India
3 shared publications - Basem Alamri
Department of Electrical Engineering, College of Engineering, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia
3 shared publications - Lucian Mihet-Popa
Faculty of Engineering, stfold University College, Halden, Norway
3 shared publications Aejaz Masood
Aligarh Muslim University
2 shared publicationsAsfar Ali Khan
Department of Electrical Engineering Aligarh Muslim University Aligarh India
2 shared publications
Latest Publications
- 16 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 33 (1) , 318-325
Regression Analysis to Predict the Dielectric Properties of Mineral and Ester Oil-Based Nanofluids Using ANN Algorithm
This study employs artificial neural networks (ANN) to predict the dielectric properties of nanofluids formulated with mineral oils, synthetic esters, and natural esters. Individual ANN models are developed for various nanoparticle–oil combinations using the Levenberg–Marquardt (LM), Scaled Conjugate Gradient (SCG), and Bayesian Regularization backpropagation (BRG) algorithms implemented in MATLAB®. The models focus on regression analysis of key electrical parameters, including AC breakdown voltage (ACBDV), dielectric dissipation factor (DDF), and relative permittivity (RP) of transformer insulating oils and their corresponding nanofluids. Comparative evaluation across different samples reveals distinct performance trade-offs among the algorithms. LM achieves faster convergence with strong DDF prediction, SCG exhibits inconsistent performance across properties, and BRG consistently delivers superior prediction and robustness for RP and DDF, as indicated by higher R2 and lower mean squared error values. Overall, BRG emerges as the most reliable and accurate approach, while LM is preferable when faster convergence is prioritized with acceptable accuracy.
- 16 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 33 (1) , 318-325
Regression Analysis to Predict the Dielectric Properties of Mineral and Ester Oil-Based Nanofluids Using ANN Algorithm
This study employs artificial neural networks (ANN) to predict the dielectric properties of nanofluids formulated with mineral oils, synthetic esters, and natural esters. Individual ANN models are developed for various nanoparticle–oil combinations using the Levenberg–Marquardt (LM), Scaled Conjugate Gradient (SCG), and Bayesian Regularization backpropagation (BRG) algorithms implemented in MATLAB®. The models focus on regression analysis of key electrical parameters, including AC breakdown voltage (ACBDV), dielectric dissipation factor (DDF), and relative permittivity (RP) of transformer insulating oils and their corresponding nanofluids. Comparative evaluation across different samples reveals distinct performance trade-offs among the algorithms. LM achieves faster convergence with strong DDF prediction, SCG exhibits inconsistent performance across properties, and BRG consistently delivers superior prediction and robustness for RP and DDF, as indicated by higher R2 and lower mean squared error values. Overall, BRG emerges as the most reliable and accurate approach, while LM is preferable when faster convergence is prioritized with acceptable accuracy.
- 5 October 2025
- Published by Springer Nature
- p. 185-198
Dielectric Characterization of Mineral Oil-Based Nanofluids for Application in Power Transformers
- 5 October 2025
- Published by Springer Nature
- p. 185-198
Dielectric Characterization of Mineral Oil-Based Nanofluids for Application in Power Transformers
- 5 October 2025
- Published by Springer Nature
- p. 691-705
DGA of Real-Time Aged Oil Used in Different Transformer
- 5 October 2025
- Published by Springer Nature
- p. 691-705
DGA of Real-Time Aged Oil Used in Different Transformer
- Open Access
- 1 September 2024
- Published by Institution of Engineering and Technology (IET) in IET Nanodielectrics
- Vol. 7 (4) , 296-306
Impact of silicon carbide, boron nitride, and zirconium dioxide nanoparticles on ester‐based dielectric fluids
This research study investigates the influence of various nanoparticles on the dielectric breakdown voltage, oil dissipation factor, viscosity, and thermal conductivity of nanofluids. Nanofluids were prepared using synthetic ester oil as the base fluid, and three nanoparticles, silicon carbide (SiC), boron nitride (BN), and zirconium dioxide (ZrO 2 ), were added at different concentrations (0.125 wt%, 0.250 wt%, and 0.375 wt%), which are basically the nano‐sized powder that can be blended in the oil. The dielectric breakdown voltage testing was conducted to evaluate the electrical performance of the nanofluids. Additionally, rheological measurements were performed to study the kinematic viscosity, while thermal conductivity was determined using appropriate techniques. The enhancements in each property were evaluated and compared for the different nanoparticle concentrations and types. Previous studies focused only on the investigation of the electrical properties of nanofluids. However, in the present study, the electrical as well as thermo‐physical characterisation of nanofluids is performed and analysed as they directly affect the cooling performance of transformers. The results provide dielectric and thermo‐physical characterisation that exhibit excellent insulation and cooling functionalities and valuable insights into the potential applications of nanofluids as dielectrics in various high‐voltage electrical equipment. ZrO 2 and SiC nanoparticles exhibited a reduction in the oil dissipation factor. SiC consistently improved breakdown voltage (Bdv), while ZrO 2 nanoparticles showed concentration‐dependent effects, enhancing Bdv at low concentrations but degrading it at higher ones. Unexpectedly, nanoparticle dispersion and lubrication effects can lead to viscosity reductions, countering conventional expectations. Surprisingly, at the highest concentration, the thermal conductivity decreases compared to the lower nano‐concentrations in synthetic ester oil.
- 1 September 2024
- Published by Institution of Engineering and Technology (IET) in IET Nanodielectrics
- Vol. 7 (4) , 296-306
Open AccessImpact of silicon carbide, boron nitride, and zirconium dioxide nanoparticles on ester‐based dielectric fluids
This research study investigates the influence of various nanoparticles on the dielectric breakdown voltage, oil dissipation factor, viscosity, and thermal conductivity of nanofluids. Nanofluids were prepared using synthetic ester oil as the base fluid, and three nanoparticles, silicon carbide (SiC), boron nitride (BN), and zirconium dioxide (ZrO 2 ), were added at different concentrations (0.125 wt%, 0.250 wt%, and 0.375 wt%), which are basically the nano‐sized powder that can be blended in the oil. The dielectric breakdown voltage testing was conducted to evaluate the electrical performance of the nanofluids. Additionally, rheological measurements were performed to study the kinematic viscosity, while thermal conductivity was determined using appropriate techniques. The enhancements in each property were evaluated and compared for the different nanoparticle concentrations and types. Previous studies focused only on the investigation of the electrical properties of nanofluids. However, in the present study, the electrical as well as thermo‐physical characterisation of nanofluids is performed and analysed as they directly affect the cooling performance of transformers. The results provide dielectric and thermo‐physical characterisation that exhibit excellent insulation and cooling functionalities and valuable insights into the potential applications of nanofluids as dielectrics in various high‐voltage electrical equipment. ZrO 2 and SiC nanoparticles exhibited a reduction in the oil dissipation factor. SiC consistently improved breakdown voltage (Bdv), while ZrO 2 nanoparticles showed concentration‐dependent effects, enhancing Bdv at low concentrations but degrading it at higher ones. Unexpectedly, nanoparticle dispersion and lubrication effects can lead to viscosity reductions, countering conventional expectations. Surprisingly, at the highest concentration, the thermal conductivity decreases compared to the lower nano‐concentrations in synthetic ester oil.
- Open Access
- 2 July 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Engineering
- Vol. 19 (1) , 1-31
Experimental and statistical investigation on the dielectric breakdown of magneto nanofluids for power applications
The insulating oil serves the dual purpose of providing insulation and cooling within transformers. This investigation aims to explore the impact of various nanoparticles on the dielectric breakdown voltage (BDV) of dielectric oils. The study examines the effect of the concentration of magnetic nanoparticles on the dielectric breakdown voltage of insulating oils. Nanoparticles such as iron (II, III) oxide (Fe3O4), cobalt (II, III) oxide (CO3O4), and ferrous phosphide (Fe3P) were utilized to create nanofluids with carrier mediums consisting of mineral oil and synthetic ester oil. BDV determination was conducted using a VDE and S–S electrode system according to IEC 60156 standards. Nanofluid were prepared using a two-step method, and their concentrations ranged from 0.01 g/L, 0.02 g/L, and 0.04 g/L in base oils. Twelve iterations were conducted for each prepared nanofluid, and breakdown voltage measurements were recorded. The results indicate a noteworthy enhancement in the breakdown voltage of nanofluids. The statistical analysis was performed on the dielectric property of nanofluid samples for better breakdown accuracy. The maximum enhancement at specific nanoparticle concentrations was shown by each nanofluid. The results show that under the S–S electrode configuration, the greatest overall enhancement was observed for Fe3P in mineral oil, with an enhancement of 70.05%, and Fe3O4 in synthetic ester oil, with an enhancement of 46.29%.
- 2 July 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Engineering
- Vol. 19 (1) , 1-31
Open AccessExperimental and statistical investigation on the dielectric breakdown of magneto nanofluids for power applications
The insulating oil serves the dual purpose of providing insulation and cooling within transformers. This investigation aims to explore the impact of various nanoparticles on the dielectric breakdown voltage (BDV) of dielectric oils. The study examines the effect of the concentration of magnetic nanoparticles on the dielectric breakdown voltage of insulating oils. Nanoparticles such as iron (II, III) oxide (Fe3O4), cobalt (II, III) oxide (CO3O4), and ferrous phosphide (Fe3P) were utilized to create nanofluids with carrier mediums consisting of mineral oil and synthetic ester oil. BDV determination was conducted using a VDE and S–S electrode system according to IEC 60156 standards. Nanofluid were prepared using a two-step method, and their concentrations ranged from 0.01 g/L, 0.02 g/L, and 0.04 g/L in base oils. Twelve iterations were conducted for each prepared nanofluid, and breakdown voltage measurements were recorded. The results indicate a noteworthy enhancement in the breakdown voltage of nanofluids. The statistical analysis was performed on the dielectric property of nanofluid samples for better breakdown accuracy. The maximum enhancement at specific nanoparticle concentrations was shown by each nanofluid. The results show that under the S–S electrode configuration, the greatest overall enhancement was observed for Fe3P in mineral oil, with an enhancement of 70.05%, and Fe3O4 in synthetic ester oil, with an enhancement of 46.29%.
- Open Access
An Experimental Study and Statistical Analysis on the Electrical Properties of Synthetic Ester-Based Nanofluids
The rise in power demand today necessitates its generation and transmission at high voltages. The efficient transmission of electric power requires transformers with an insulation system that exhibits excellent dielectric properties. In this paper ZnO and CuO nanomaterials are utilized to investigate the dielectric characteristics of pure synthetic ester oil and its related nanofluids (NFs) from room temperature up to 60 °C at increments of 20 °C, including AC breakdown voltage, Dielectric Dissipation factor, and DC resistivity. The breakdown testing is carried out in accordance with experimental IEC-60156 requirements. The DC resistivity and dissipation factor of oils are measured using the Dissipation Factor meter, resistivity meter, and a heating chamber with an oil cell that follows IEC 60247 standard. The statistical analysis is performed on the breakdown voltages test values using the Weibull probability distribution model for better accuracy. From the results, it has been found that ZnO nanofluid possesses a higher breakdown voltage among all the tested liquids. Furthermore CuO nanofluid gives a minimum value of dissipation factor even at higher temperatures.
Open AccessAn Experimental Study and Statistical Analysis on the Electrical Properties of Synthetic Ester-Based Nanofluids
The rise in power demand today necessitates its generation and transmission at high voltages. The efficient transmission of electric power requires transformers with an insulation system that exhibits excellent dielectric properties. In this paper ZnO and CuO nanomaterials are utilized to investigate the dielectric characteristics of pure synthetic ester oil and its related nanofluids (NFs) from room temperature up to 60 °C at increments of 20 °C, including AC breakdown voltage, Dielectric Dissipation factor, and DC resistivity. The breakdown testing is carried out in accordance with experimental IEC-60156 requirements. The DC resistivity and dissipation factor of oils are measured using the Dissipation Factor meter, resistivity meter, and a heating chamber with an oil cell that follows IEC 60247 standard. The statistical analysis is performed on the breakdown voltages test values using the Weibull probability distribution model for better accuracy. From the results, it has been found that ZnO nanofluid possesses a higher breakdown voltage among all the tested liquids. Furthermore CuO nanofluid gives a minimum value of dissipation factor even at higher temperatures.
- Open Access
Influence of Area and Volume Effect on Dielectric Behaviour of the Mineral Oil-Based Nanofluids
Transformer oil is conventionally used as an insulating liquid for the purpose of insulation and cooling in power transformers. The rise in the power demand has put stress on the existing insulation system used for power transmission. Nanotechnology provides an advanced approach to upgrade the conventional insulation system by producing nano-oil with enhanced dielectric characteristics. The aim of the study is to present the influence of area volume effect on the dielectric performance of mineral oil and its nanofluids. In this paper, nanofluids are prepared by dispersing two different concentrations of SiO2 nanoparticles in base transformer oil using a two-step method. The effect of area and volume is investigated on nanofluids in the laboratory using coaxial electrode configurations under different test conditions. The AC breakdown voltage and maximum electric stress is determined for the pure oil and nanofluids. The results show that the addition of SiO2 nanoparticles significantly improves the dielectric characteristics of transformer oil. Moreover, the breakdown phenomenon is also discussed to analyze the effect of nanoparticle, stressed area, and stressed volume on the dielectric strength of insulating oil. Nanofluids could be an alternative to mineral oil.
Open AccessInfluence of Area and Volume Effect on Dielectric Behaviour of the Mineral Oil-Based Nanofluids
Transformer oil is conventionally used as an insulating liquid for the purpose of insulation and cooling in power transformers. The rise in the power demand has put stress on the existing insulation system used for power transmission. Nanotechnology provides an advanced approach to upgrade the conventional insulation system by producing nano-oil with enhanced dielectric characteristics. The aim of the study is to present the influence of area volume effect on the dielectric performance of mineral oil and its nanofluids. In this paper, nanofluids are prepared by dispersing two different concentrations of SiO2 nanoparticles in base transformer oil using a two-step method. The effect of area and volume is investigated on nanofluids in the laboratory using coaxial electrode configurations under different test conditions. The AC breakdown voltage and maximum electric stress is determined for the pure oil and nanofluids. The results show that the addition of SiO2 nanoparticles significantly improves the dielectric characteristics of transformer oil. Moreover, the breakdown phenomenon is also discussed to analyze the effect of nanoparticle, stressed area, and stressed volume on the dielectric strength of insulating oil. Nanofluids could be an alternative to mineral oil.
- Open Access
- 26 January 2022
- Published by MDPI AG in Electronics
- Vol. 11 (3) , 376
Assessment of Thermophysical Performance of Ester-Based Nanofluids for Enhanced Insulation Cooling in Transformers
Nanotechnology provides an effective way to upgrade the thermophysical characteristics of dielectric oils and creates optimal transformer design. The properties of insulation materials have a significant effect on the optimal transformer design. Ester-based nanofluids (NF) are introduced as an energy-efficient alternative to conventional mineral oils, prepared by dispersing nanoparticles in the base oil. This study presents the effect of nanoparticles on the thermophysical properties of pure natural ester (NE) and synthetic ester (SE) oils with temperature varied from ambient temperature up to 80 °C. A range of concentrations of graphene oxide (GO) and TiO2 nanoparticles were used in the study to upgrade the thermophysical properties of ester-based oils. The experiments for thermal conductivity and viscosity were performed using a TC-4 apparatus that follows Debby’s concept and a redwood viscometer apparatus that follows the ASTM-D445 experimental standard, respectively. The experimental results show that nanoparticles have a positive effect on the thermal conductivity and viscosity of oils which reduces with an increase in temperature.
- 26 January 2022
- Published by MDPI AG in Electronics
- Vol. 11 (3) , 376
Open AccessAssessment of Thermophysical Performance of Ester-Based Nanofluids for Enhanced Insulation Cooling in Transformers
Nanotechnology provides an effective way to upgrade the thermophysical characteristics of dielectric oils and creates optimal transformer design. The properties of insulation materials have a significant effect on the optimal transformer design. Ester-based nanofluids (NF) are introduced as an energy-efficient alternative to conventional mineral oils, prepared by dispersing nanoparticles in the base oil. This study presents the effect of nanoparticles on the thermophysical properties of pure natural ester (NE) and synthetic ester (SE) oils with temperature varied from ambient temperature up to 80 °C. A range of concentrations of graphene oxide (GO) and TiO2 nanoparticles were used in the study to upgrade the thermophysical properties of ester-based oils. The experiments for thermal conductivity and viscosity were performed using a TC-4 apparatus that follows Debby’s concept and a redwood viscometer apparatus that follows the ASTM-D445 experimental standard, respectively. The experimental results show that nanoparticles have a positive effect on the thermal conductivity and viscosity of oils which reduces with an increase in temperature.
- Open Access
- 30 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 168971-168980
Effect of Iron/Titania-Based Nanomaterials on the Dielectric Properties of Mineral Oil, Natural and Synthetic Esters as Transformers Insulating Fluid
There is a need to develop upgraded insulant which offers superior dielectric properties than mineral oil in terms of cooling, insulation, and efficient functioning under extreme weather conditions. These oils are nanofluids that are synthesized by dispersing nanoparticles in the oil. These fluids are tested with their ability to withstand various faults under operating conditions by determining the dielectric and electrical properties like ac breakdown strength, relative permittivity, and dielectric dissipation factor. A comparison between nanoparticles and their effect on insulating oils has been widely discussed and presented. In this study, three nanoparticles namely Fe 3 O 4 , TiO 2 , and Fe-Cu are dispersed in three different types of oils namely mineral oil (i.e., transformer oil used as insulating liquid in transformers), synthetic ester oil (i.e., pentaerythritol ester), and rapeseed oil (natural-ester transformer fluid). These nanofluids are considered upgraded insulant due to its superior insulation characteristics compared to pure mineral oil. Synthetic ester-based oils and natural rapeseed oil are tested for insulation capabilities for better results, which show they have all the potential to replace transformer oil in high voltage equipment’s.
- 30 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 168971-168980
Open AccessEffect of Iron/Titania-Based Nanomaterials on the Dielectric Properties of Mineral Oil, Natural and Synthetic Esters as Transformers Insulating Fluid
There is a need to develop upgraded insulant which offers superior dielectric properties than mineral oil in terms of cooling, insulation, and efficient functioning under extreme weather conditions. These oils are nanofluids that are synthesized by dispersing nanoparticles in the oil. These fluids are tested with their ability to withstand various faults under operating conditions by determining the dielectric and electrical properties like ac breakdown strength, relative permittivity, and dielectric dissipation factor. A comparison between nanoparticles and their effect on insulating oils has been widely discussed and presented. In this study, three nanoparticles namely Fe 3 O 4 , TiO 2 , and Fe-Cu are dispersed in three different types of oils namely mineral oil (i.e., transformer oil used as insulating liquid in transformers), synthetic ester oil (i.e., pentaerythritol ester), and rapeseed oil (natural-ester transformer fluid). These nanofluids are considered upgraded insulant due to its superior insulation characteristics compared to pure mineral oil. Synthetic ester-based oils and natural rapeseed oil are tested for insulation capabilities for better results, which show they have all the potential to replace transformer oil in high voltage equipment’s.