Abdul Hamid Hamisa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdul Hamid Hamisa has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Wan Hamzah Azmi
Universiti Malaysia Pahang Al-Sultan Abdullah
4 shared publications - Mohd Farid Ismail
Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal 76100, Melaka, Malaysia
3 shared publications - Anwar Ilmar Ramadhan
Universitas Muhammadiyah Jakarta
2 shared publications - Hafiz Muhammad Ali
Mechanical Engineering Department, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia
2 shared publications A. N. Aziah
Faculty of Science, Engineering and Agrotechnology, School of Engineering, University College of Yayasan Pahang (UCYP), 25050, Kuantan, Pahang, Malaysia
1 shared publication- Bambang Setiawan
Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Jakarta, Jakarta 10510, Indonesia
1 shared publication
Latest Publications
- 5 August 2026
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 151 (18) , 15499-15517
Response surface method optimization of SiO2/POE nanolubricant performance for electrically powered compressor of air-conditioning system
- 5 August 2026
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 151 (18) , 15499-15517
Response surface method optimization of SiO2/POE nanolubricant performance for electrically powered compressor of air-conditioning system
- Open Access
- 5 June 2025
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Mechanics
- Vol. 137 (1) , 58-66
Mechanical Properties of Composite from Roving Fibre and Polyester Resin BQTN R157 Variations Manufactured using Vacuum Bagging Method for Unmanned Aerial Vehicle Applications
A study on the mechanical properties of roving fibre-reinforced polyester resin composites was conducted, focusing on tensile tests with fibre orientations of 0°, 90° and 45°. The composite was fabricated with a fibre-to-resin mass fraction of 60%:40%. The objective of this research was to analyse the micro and macro properties of roving fibre composites with polyester resin for unmanned aerial vehicle (UAV) applications. Micro properties were evaluated through density testing, while macro properties were determined via tensile strength testing following ASTM D3039 standards. The UAV application was further analysed against the atmospheric pressure and altitude requirements based on the International Standard Atmosphere. Composite fabrication employed the vacuum bagging method with a consistent 60% fibre and 40% resin volume fraction. Results indicated that the highest density, 1.844 g/cm³, was achieved with a 45° fibre orientation. The study revealed that increased fibre content corresponds to higher composite density. Tensile tests demonstrated that the highest tensile modulus of 25,255.33 MPa, was obtained with a 90° fibre orientation. Atmospheric pressure analysis for UAVs showed that the 90° fibre-oriented composite exhibited superior strength compared to air pressure, achieving a maximum stress of 641.96 MPa. These findings confirm that the composite with a 90° fibre orientation meets the required air pressure standards for UAV construction, demonstrating high suitability for such applications.
- 5 June 2025
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Mechanics
- Vol. 137 (1) , 58-66
Open AccessMechanical Properties of Composite from Roving Fibre and Polyester Resin BQTN R157 Variations Manufactured using Vacuum Bagging Method for Unmanned Aerial Vehicle Applications
A study on the mechanical properties of roving fibre-reinforced polyester resin composites was conducted, focusing on tensile tests with fibre orientations of 0°, 90° and 45°. The composite was fabricated with a fibre-to-resin mass fraction of 60%:40%. The objective of this research was to analyse the micro and macro properties of roving fibre composites with polyester resin for unmanned aerial vehicle (UAV) applications. Micro properties were evaluated through density testing, while macro properties were determined via tensile strength testing following ASTM D3039 standards. The UAV application was further analysed against the atmospheric pressure and altitude requirements based on the International Standard Atmosphere. Composite fabrication employed the vacuum bagging method with a consistent 60% fibre and 40% resin volume fraction. Results indicated that the highest density, 1.844 g/cm³, was achieved with a 45° fibre orientation. The study revealed that increased fibre content corresponds to higher composite density. Tensile tests demonstrated that the highest tensile modulus of 25,255.33 MPa, was obtained with a 90° fibre orientation. Atmospheric pressure analysis for UAVs showed that the 90° fibre-oriented composite exhibited superior strength compared to air pressure, achieving a maximum stress of 641.96 MPa. These findings confirm that the composite with a 90° fibre orientation meets the required air pressure standards for UAV construction, demonstrating high suitability for such applications.
- Open Access
- 5 January 2023
- Published by MDPI AG in Lubricants
- Vol. 11 (1) , 18
Tribology Performance of Polyol-Ester Based TiO2, SiO2, and Their Hybrid Nanolubricants
The tribology properties of TiO2/POE, SiO2/POE and TiO2-SiO2/POE nanolubricants were investigated for an automotive air-conditioning system with an electrically-driven compressor (EDC). A two-step preparation method was used in dispersing TiO2 and SiO2 nanoparticles into Polyol-ester (POE)-based lubricant at different volume concentrations of 0.01 to 0.1%. The coefficient of friction (COF) and wear scar diameter (WSD) were investigated using a Koehler four-ball tribo tester and microscopes. For the TiO2/POE, SiO2/POE and TiO2-SiO2/POE nanolubricants, respectively, the lowest COFs with maximum reduction were attained at 37.5%, 33.5% and 31.6% each at volume concentrations of 0.05%, 0.01% and 0.03%. The highest WSD reduction for the TiO2/POE and SiO2/POE mono nanolubricants were attained at 12.5% and 26.4%, respectively, at the same volume concentration of 0.01%. Meanwhile, the maximum reduction of WSD for the TiO2-SiO2/POE hybrid nanolubricant was reached at 12.4% at 0.03% volume concentration. As a conclusion, mono and hybrid nanolubricants with volume concentrations of less than 0.05% are suggested for use in air-conditioning systems with EDC because of their outstanding tribology performances. Further performance investigation of nanolubricants in the air-conditioning system is required to extend the present work.
- 5 January 2023
- Published by MDPI AG in Lubricants
- Vol. 11 (1) , 18
Open AccessTribology Performance of Polyol-Ester Based TiO2, SiO2, and Their Hybrid Nanolubricants
The tribology properties of TiO2/POE, SiO2/POE and TiO2-SiO2/POE nanolubricants were investigated for an automotive air-conditioning system with an electrically-driven compressor (EDC). A two-step preparation method was used in dispersing TiO2 and SiO2 nanoparticles into Polyol-ester (POE)-based lubricant at different volume concentrations of 0.01 to 0.1%. The coefficient of friction (COF) and wear scar diameter (WSD) were investigated using a Koehler four-ball tribo tester and microscopes. For the TiO2/POE, SiO2/POE and TiO2-SiO2/POE nanolubricants, respectively, the lowest COFs with maximum reduction were attained at 37.5%, 33.5% and 31.6% each at volume concentrations of 0.05%, 0.01% and 0.03%. The highest WSD reduction for the TiO2/POE and SiO2/POE mono nanolubricants were attained at 12.5% and 26.4%, respectively, at the same volume concentration of 0.01%. Meanwhile, the maximum reduction of WSD for the TiO2-SiO2/POE hybrid nanolubricant was reached at 12.4% at 0.03% volume concentration. As a conclusion, mono and hybrid nanolubricants with volume concentrations of less than 0.05% are suggested for use in air-conditioning systems with EDC because of their outstanding tribology performances. Further performance investigation of nanolubricants in the air-conditioning system is required to extend the present work.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2732 (1)
Development of experimental setup for batteryless solar powered portable air conditioning system
Electricity requirements and demands in the use of air conditioning from year to year are increasing. Along with the development of technology, various studies have been made in energy saving. One of the energy options is solar energy because the source is easily available and will never run out. For this research, the three main objectives to be achieved are to develop experiment setup of air-conditioning by using solar PV as power supply into AC system without battery storage, to measure reading of power usage and temperature and to make a comparison between the usage of common electricity and solar PV power. The methodology of this research will involve three main processes which are the development of Solar AC setup, running the experiment and data collecting and data analysis and discussion. In this study, it will be focused on developing the experimental setup of the overall research. The expected result of this research, the main objectives will be achieved and prove that the system will function well and give good result compared to common electricity air conditioning system.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2732 (1)
Open AccessDevelopment of experimental setup for batteryless solar powered portable air conditioning system
Electricity requirements and demands in the use of air conditioning from year to year are increasing. Along with the development of technology, various studies have been made in energy saving. One of the energy options is solar energy because the source is easily available and will never run out. For this research, the three main objectives to be achieved are to develop experiment setup of air-conditioning by using solar PV as power supply into AC system without battery storage, to measure reading of power usage and temperature and to make a comparison between the usage of common electricity and solar PV power. The methodology of this research will involve three main processes which are the development of Solar AC setup, running the experiment and data collecting and data analysis and discussion. In this study, it will be focused on developing the experimental setup of the overall research. The expected result of this research, the main objectives will be achieved and prove that the system will function well and give good result compared to common electricity air conditioning system.
- Open Access
- 5 March 2022
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 92 (1) , 9-17
Experimental Investigation on Newtonian Behaviour and Viscosity of TiO2/PVE Nanolubricants for Application in Refrigeration System
The flow characteristics are highly dependent to viscosity of the fluid. For nanolubricant with different concentration, viscosity change is one of important parameter to be measured to evaluate its functional ability as lubricant. This paper studies about the effect of TiO2 nanoparticle in poly vinyl ether (PVE) at different concentration and temperature. Nanolubricant with volume concentration between 0.01% to 0.1% prepared using two-step method and tested at 40°C, 60°C, and 80°C temperature by using digital rheometer. Beforehand, the colloidal suspension fluid was observed by visual and zeta potential measurement to ensure its stability. The fluid Newtonian behaviour was identified for shear rate up to 1000 rpm. The results shown that dynamic viscosity of 0.01% TiO2/PVE nanolubricant had decreased up to 11% for all measured temperature. For other samples, viscosity increment does not reach more than 1.5% compared to pure PVE oil. It also observed that viscosity increment by the increasing of volume concentration, but it decreases by the increment of temperature. The finding in this study confirms that viscosity of TiO2/PVE nanolubricant effected by both temperature and volume concentration to opposite behaviour.
- 5 March 2022
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 92 (1) , 9-17
Open AccessExperimental Investigation on Newtonian Behaviour and Viscosity of TiO2/PVE Nanolubricants for Application in Refrigeration System
The flow characteristics are highly dependent to viscosity of the fluid. For nanolubricant with different concentration, viscosity change is one of important parameter to be measured to evaluate its functional ability as lubricant. This paper studies about the effect of TiO2 nanoparticle in poly vinyl ether (PVE) at different concentration and temperature. Nanolubricant with volume concentration between 0.01% to 0.1% prepared using two-step method and tested at 40°C, 60°C, and 80°C temperature by using digital rheometer. Beforehand, the colloidal suspension fluid was observed by visual and zeta potential measurement to ensure its stability. The fluid Newtonian behaviour was identified for shear rate up to 1000 rpm. The results shown that dynamic viscosity of 0.01% TiO2/PVE nanolubricant had decreased up to 11% for all measured temperature. For other samples, viscosity increment does not reach more than 1.5% compared to pure PVE oil. It also observed that viscosity increment by the increasing of volume concentration, but it decreases by the increment of temperature. The finding in this study confirms that viscosity of TiO2/PVE nanolubricant effected by both temperature and volume concentration to opposite behaviour.
- Open Access
- 25 December 2021
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 90 (1) , 10-22
Rheological Properties of TiO2/POE Nanolubricant for Automotive Air-Conditioning System
The enhancement of nanolubricant rheological properties can improve the performance of automotive air-conditioning systems. The rheological properties of the TiO2/POE nanolubricant were investigated in this study at 0.01 to 0.1% volume concentrations and temperatures ranging from 0 to 100°C. TiO2 nanoparticles were dispersed in the base lubricant of Polyol-ester (POE RL68H) lubricant in two steps. The dynamic viscosity was measured with an Anton-Paar Rotational Rheometer. According to the findings, the TiO2/POE nanolubricant behaved as Newtonian fluids at all volume concentrations and temperatures. The dynamic viscosity increment of nanolubricants up to 1.75% only occurred for 0.1% volume concentration and temperature of 90 to 100°C. Meanwhile, when compared to POE lubricant, nanolubricants with volume concentrations of 0.01 and 0.05% showed a decrement trend in dynamic viscosity of up to 1.8%. Finally, the TiO2/POE nanolubricant improved the rheological properties of the POE lubricant for use in automotive air-conditioning systems.
- 25 December 2021
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 90 (1) , 10-22
Open AccessRheological Properties of TiO2/POE Nanolubricant for Automotive Air-Conditioning System
The enhancement of nanolubricant rheological properties can improve the performance of automotive air-conditioning systems. The rheological properties of the TiO2/POE nanolubricant were investigated in this study at 0.01 to 0.1% volume concentrations and temperatures ranging from 0 to 100°C. TiO2 nanoparticles were dispersed in the base lubricant of Polyol-ester (POE RL68H) lubricant in two steps. The dynamic viscosity was measured with an Anton-Paar Rotational Rheometer. According to the findings, the TiO2/POE nanolubricant behaved as Newtonian fluids at all volume concentrations and temperatures. The dynamic viscosity increment of nanolubricants up to 1.75% only occurred for 0.1% volume concentration and temperature of 90 to 100°C. Meanwhile, when compared to POE lubricant, nanolubricants with volume concentrations of 0.01 and 0.05% showed a decrement trend in dynamic viscosity of up to 1.8%. Finally, the TiO2/POE nanolubricant improved the rheological properties of the POE lubricant for use in automotive air-conditioning systems.