Bibol Zhakipbayev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bibol Zhakipbayev has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Alexandr Kolesnikov
Department of Life Safety and Environmental Protection, M. Auezov South Kazakhstan University, Shymkent 160012, Kazakhstan
2 shared publications - Aizhan Shal
Department of “Life Safety and Environmental Protection” M. Auezov South Kazakhstan University, Building B, Av. Tauke Khan, 5, Shymkent 160012, Kazakhstan
1 shared publication - Akmaral Koishina
Department of Petrochemical Engineering, Sh. Yesenov Caspian University of Technology and Engineering, Aktau 130002, Kazakhstan
1 shared publication - Elmira Akhmetova
Department of Science of Production and Innovation, M. Auezov South Kazakhstan University, Shymkent 160012, Kazakhstan
1 shared publication - Leila Seidaliyeva
Department of Ecology and Geology, Sh. Yessenov Caspian University of Technology and Engineering, Aktau 130002, Kazakhstan
1 shared publication - Lyailim Taizhanova
Yessenov University, Aktau, Kazakhstan
1 shared publication
Latest Publications
- Open Access
- 4 February 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (2) , 70
Physicochemical Studies of Opoka as a Raw Material Component of Sodium Silicate Mixture for Subsequent Synthesis of Foam Glass Material Based on It
The present article presents the results of physical and chemical studies of opoka. In particular, the opoka was subjected to chemical analysis, X-ray phase, differential thermal analysis, scanning microscopy, and X-ray energy dispersive elemental microanalysis. The opoka was studied with the aim of using it as an available raw material for obtaining a sodium silicate mixture and, in the future, developing an energy-saving technology for obtaining a building heat-insulating and sound-insulating foam glass material based on it, using synthesis. As a result of the studies, the chemical composition of the opoka was determined, which is 69–80% represented by silica. The elemental composition of the opoka was established, which is represented by 94.25% oxides of Si, Al, and Fe. The presence of such oxides makes it an ideal raw material component of a silicate-sodium mixture for the subsequent synthesis of foam glass material from it. Experimental exploratory studies on the synthesis of foam glass based on opoka have been carried out. The experimentally obtained sample of foam glass material consists of 93.37% Si, Al, Mg, and Na oxides, has a porous structure with a pore size of 2–5 microns, an average density of 375 kg/m3, thermal conductivity of 0.063 W/(m °C) at 25 °C, and noise absorption of 51.6 Db.
- 4 February 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (2) , 70
Open AccessPhysicochemical Studies of Opoka as a Raw Material Component of Sodium Silicate Mixture for Subsequent Synthesis of Foam Glass Material Based on It
The present article presents the results of physical and chemical studies of opoka. In particular, the opoka was subjected to chemical analysis, X-ray phase, differential thermal analysis, scanning microscopy, and X-ray energy dispersive elemental microanalysis. The opoka was studied with the aim of using it as an available raw material for obtaining a sodium silicate mixture and, in the future, developing an energy-saving technology for obtaining a building heat-insulating and sound-insulating foam glass material based on it, using synthesis. As a result of the studies, the chemical composition of the opoka was determined, which is 69–80% represented by silica. The elemental composition of the opoka was established, which is represented by 94.25% oxides of Si, Al, and Fe. The presence of such oxides makes it an ideal raw material component of a silicate-sodium mixture for the subsequent synthesis of foam glass material from it. Experimental exploratory studies on the synthesis of foam glass based on opoka have been carried out. The experimentally obtained sample of foam glass material consists of 93.37% Si, Al, Mg, and Na oxides, has a porous structure with a pore size of 2–5 microns, an average density of 375 kg/m3, thermal conductivity of 0.063 W/(m °C) at 25 °C, and noise absorption of 51.6 Db.
- Open Access
Processing of Waste from Enrichment with the Production of Cement Clinker and the Extraction of Zinc
This paper presents studies on the processing of enrichment tailings as a component of a raw mixture in order to obtain cement clinker, with simultaneous distillation of zinc. Thermodynamic studies were carried out in the temperature range of 600–1600 °C using the software application “HSC Chemistry 6” developed by the metallurgical company Outokumpu (Finland). As a result of the conducted studies, we found that zinc contributes to the intensification of mineral formation of cement clinker. In particular, it was found that the formation of belite is possible in the temperature range from 990.7 to 1500 °C with Gibbs energy values of −0.01 and −323.8 kJ (which is better than the standard process by −11.4 kJ), respectively; the formation of alite is possible in the temperature range from 982.9 to 1500 °C with Gibbs energy values of −0.05 and −402.1 kJ (better than the standard process by −11.4 kJ), respectively; the formation of tricalcium aluminate is thermodynamically possible in the temperature range from 600 °C at ΔGTo = −893.8 kJ to 1500 °C at ΔGTo = −1899.3 kJ (better than the standard process by −1570.1 kJ), respectively; and the formation of four calcium aluminoferrite is possible in the temperature range from 600 °C at ΔGTo = −898.9 kJ to 1500 °C at ΔGTo = −1959.3 kJ (better than the standard process by −1570.2 kJ), respectively, with simultaneous distillation of zinc into a gaseous state for its further capture.
Open AccessProcessing of Waste from Enrichment with the Production of Cement Clinker and the Extraction of Zinc
This paper presents studies on the processing of enrichment tailings as a component of a raw mixture in order to obtain cement clinker, with simultaneous distillation of zinc. Thermodynamic studies were carried out in the temperature range of 600–1600 °C using the software application “HSC Chemistry 6” developed by the metallurgical company Outokumpu (Finland). As a result of the conducted studies, we found that zinc contributes to the intensification of mineral formation of cement clinker. In particular, it was found that the formation of belite is possible in the temperature range from 990.7 to 1500 °C with Gibbs energy values of −0.01 and −323.8 kJ (which is better than the standard process by −11.4 kJ), respectively; the formation of alite is possible in the temperature range from 982.9 to 1500 °C with Gibbs energy values of −0.05 and −402.1 kJ (better than the standard process by −11.4 kJ), respectively; the formation of tricalcium aluminate is thermodynamically possible in the temperature range from 600 °C at ΔGTo = −893.8 kJ to 1500 °C at ΔGTo = −1899.3 kJ (better than the standard process by −1570.1 kJ), respectively; and the formation of four calcium aluminoferrite is possible in the temperature range from 600 °C at ΔGTo = −898.9 kJ to 1500 °C at ΔGTo = −1959.3 kJ (better than the standard process by −1570.2 kJ), respectively, with simultaneous distillation of zinc into a gaseous state for its further capture.