Shuo Shang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shuo Shang has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Haihong Fan
College of Science, Northwest A & F University, Yangling, P. R. China
2 shared publications - Lin Li
College of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
2 shared publications - Zhou Li
College of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
2 shared publications - Yuxiang Li
College of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
1 shared publication
Latest Publications
- Open Access
Structure of Sewage Sludge-Clay Multiscale Composite Particles to Control the Mechanism of SO2 and H2S Gas Release
In order to address the problem of sulfur gas and other odors released in the process of using sewage sludge as a construction material, this study prepared multiscale composite particles with a “large scale-medium scale-small scale-micro scale” structure by mixing sludge with silica-alumina building materials. Analysis of the structural changes formed by the internal gas of composite particles due to diffusion at different temperatures and a study of the characteristics of SO2 and H2S release from composite particles were conducted, as well as being compared with the release characteristics of pure sludge, which clarified the mechanism of controlling sulfur-containing-gas release from composite particles. The results showed that compared with pure sludge, the sludge-clay multiscale composite particles were able to reduce the release of SO2 and H2S up to 90% and 91%, and the release temperatures of SO2 and H2S were increased to 120 °C and 80 °C, respectively. Meanwhile, the special structure of the sludge-clay multiscale composite particles and the clay composition are the main factors that hinder the diffusion of sludge pyrolysis gases. Additionally, there are three layers of “gray surface layer-black mixed layer-dark gray spherical core” formed inside the composite particles, which is the apparent manifestation of the diffusion of volatile gases. This study provides theoretical support for the application of multiscale composite particle inhibition of odor-release technology in industrial production.
Open AccessStructure of Sewage Sludge-Clay Multiscale Composite Particles to Control the Mechanism of SO2 and H2S Gas Release
In order to address the problem of sulfur gas and other odors released in the process of using sewage sludge as a construction material, this study prepared multiscale composite particles with a “large scale-medium scale-small scale-micro scale” structure by mixing sludge with silica-alumina building materials. Analysis of the structural changes formed by the internal gas of composite particles due to diffusion at different temperatures and a study of the characteristics of SO2 and H2S release from composite particles were conducted, as well as being compared with the release characteristics of pure sludge, which clarified the mechanism of controlling sulfur-containing-gas release from composite particles. The results showed that compared with pure sludge, the sludge-clay multiscale composite particles were able to reduce the release of SO2 and H2S up to 90% and 91%, and the release temperatures of SO2 and H2S were increased to 120 °C and 80 °C, respectively. Meanwhile, the special structure of the sludge-clay multiscale composite particles and the clay composition are the main factors that hinder the diffusion of sludge pyrolysis gases. Additionally, there are three layers of “gray surface layer-black mixed layer-dark gray spherical core” formed inside the composite particles, which is the apparent manifestation of the diffusion of volatile gases. This study provides theoretical support for the application of multiscale composite particle inhibition of odor-release technology in industrial production.
- Open Access
Preparation of Lightweight Ceramsite from Solid Waste Using SiC as a Foaming Agent
SiC was chosen as the foaming agent, and river bottom silt, waste oil sludge, paint bucket slag, and fly ash were used as raw materials, to prepare lightweight ceramsite without adding any chemical additives. The effects of SiC dosing and sintering temperature on various properties of the ceramsite were studied, and the pore-forming mechanism of the lightweight ceramsite was clarified by thermal analysis and X-ray diffraction analysis. The results showed that the single ceramsite compressive strength, water absorption, bulk density, and porosity of ceramsite sintered at 1180 °C with 1.0% SiC were 2.15 MPa, 2.02%, 490 kg/m3, and 23.85%, respectively. The major mineralogical compositions were quartz, fayalite, and kyanite, with small amounts of albite-low from 1140 to 1190 °C. Furthermore, the concentration of all tested heavy metals from ceramsite was lower than the maximum allowable concentration of the leaching solution specified in the Chinese national standard (GB 5085.3-2007), which reveals that this solid waste ceramsite will not cause secondary environmental pollution. The prepared ceramsite, exhibiting lower bulk density, high water absorption and porosity, and effective solidification of deleterious elements, can be used to prepare green lightweight aggregate concrete. Importantly, preparation of solid waste ceramsite is an effective way to dispose of hazardous wastes.
Open AccessPreparation of Lightweight Ceramsite from Solid Waste Using SiC as a Foaming Agent
SiC was chosen as the foaming agent, and river bottom silt, waste oil sludge, paint bucket slag, and fly ash were used as raw materials, to prepare lightweight ceramsite without adding any chemical additives. The effects of SiC dosing and sintering temperature on various properties of the ceramsite were studied, and the pore-forming mechanism of the lightweight ceramsite was clarified by thermal analysis and X-ray diffraction analysis. The results showed that the single ceramsite compressive strength, water absorption, bulk density, and porosity of ceramsite sintered at 1180 °C with 1.0% SiC were 2.15 MPa, 2.02%, 490 kg/m3, and 23.85%, respectively. The major mineralogical compositions were quartz, fayalite, and kyanite, with small amounts of albite-low from 1140 to 1190 °C. Furthermore, the concentration of all tested heavy metals from ceramsite was lower than the maximum allowable concentration of the leaching solution specified in the Chinese national standard (GB 5085.3-2007), which reveals that this solid waste ceramsite will not cause secondary environmental pollution. The prepared ceramsite, exhibiting lower bulk density, high water absorption and porosity, and effective solidification of deleterious elements, can be used to prepare green lightweight aggregate concrete. Importantly, preparation of solid waste ceramsite is an effective way to dispose of hazardous wastes.