IÜİsMail Ünsal

İsMail Ünsal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


İsMail Ünsal has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    An experimental study on the impact behavior of geopolymer concrete incorporating recycled asphalt pavement aggregate

    by İsMail Ünsal

    This study aims to further enhance the potential environmental benefits of geopolymer concrete by incorporating recycled asphalt pavement (RAP) aggregates into the aggregate composition and to experimentally investigate the dynamic impact behavior of this eco-friendly product. RAP aggregate was substituted with fine aggregate at 0%, 33%, and 66% proportions. A total of 18 unique mixtures were formulated. Fly ash (FA) and ground granulated blast furnace slag (GGBFS) served as the binders, with GGBFS-to-binder ratios established at 16.5%, 33%, and 66%. Sodium silicate and sodium hydroxide were employed as alkali activators at two specific ratios (Na₂SiO₃/NaOH): 2.5 and 3. The instrumented drop-weight tests were performed to evaluate the material’s impact characteristics by analyzing the time histories of impact force and energy dissipation. Incorporating RAP aggregate resulted in a modest decrease in energy dissipation and impact strength. However, this reduction was effectively offset by GGBFS, resulting in enhanced impact performance relative to the control mixture. A substitution level of 33% RAP exhibited superior impact behavior compared to 66% RAP substitution. The mechanical performance observed under static and dynamic conditions demonstrated that the overall impact resistance of geopolymer concrete can be improved through the partial substitution of RAP, in conjunction with a substantial proportion of GGBFS in the mixture. These findings may indicate that RAP‑substituted geopolymer concrete could serve as a potential and sustainable option for low‑carbon geopolymer technologies requiring high energy dissipation.

  • Examination of The Mechanical Properties of Carbon Fiber Reinforced Concrete Under Impact Loads

    by İsMail Ünsal, Mehmet Cihan Korkmaz

    This study examined the impact response of carbon fiber-reinforced concrete under low-velocity impacts. The tests were executed utilizing the instrumented drop-weight test setup, which is also proposed in ACI 544.2R. The study focused on two specific lengths of fiber: one measuring 3 mm, and another measuring 12 mm. The fiber content of the mixtures was 5 kg/m3, 10 kg/m3, and 15 kg/m3, based on the concrete volume. The impact behavior was analyzed using force and energy graphs derived from the time history data. Research showed that 3 mm short fibers outperformed 12 mm long fibers. All fiber-reinforced samples, except for the 12_15 mixture, improved energy dissipation compared to the control concrete. The 3_15 mixture exhibited the highest energy dissipation at 162.1%, relative to control sample, followed by 12_10 at 137.4%. The damage patterns indicated that the control samples and the 12_15 mixture were the most damaged, while the 3_15 mixture showed the least damage.

  • Investigation of Konya Meteorological Snow Cover Depth Trend Using Mann Kendall and Innovative Sen Methods

    by M. Fatih Şahan, Büşra Yeşilgül, İsMail Ünsal

    This study investigates the snow cover depths trend in Konya province according to different approaches. For this purpose, trend analysis was carried out using the annual maximum snow cover depths data of 5 different stations in Konya. Trend data analysis at the stations was performed according to the Mann-Kendall and Innovative Sen Methods. In addition, the slope of the trend was found with Sen's Slope Estimator Test. According to the Mann-Kendall method, an increasing trend was observed in the annual maximum snow cover depth recorded in Beyşehir, but no trend was observed in other stations. According to the innovative Sen method, an increasing trend was observed in Konya Airport, Beyşehir, and Cihanbeyli stations, and a decreasing trend was observed in Akşehir and Ereğli. Trends obtained with different approaches reveal that the available TS EN 1991-1-3 standard, which determines snow loads, needs to be re-evaluated for Konya Airport, Beyşehir, and Cihanbeyli.

  • BODRUM KATLARDA RİJİT BODRUM PERDE TASARIMININ YAPI DAVRANIŞI ÜZERİNDEKİ ETKİSİ

    by İsmail Ünsal, M. Fatih Şahan

    Bu çalışma, binaların bodrum katlarında sırasıyla 1, 2 ,3 ve 4 cepheye yerleştirilen bodrum perdelerinin ve hiç bodrum perdesi olmamasının yapı davranışına etkisini araştırmaktadır. Bu amaçla ele alınan 13 katlı betonarme bir konut binası için Türkiye Bina Deprem Yönetmeliğinde (TBDY-2018) verilen dört farklı taşıyıcı sistem tipi esas alınmıştır. Salt çerçeveli, salt perdeli ve plandaki perde oranı düşük ve yüksek olan iki adet çerçeveli-perdeli taşıyıcı sistem olmak üzere dört farklı taşıyıcı sistem tipi ve beş farklı bodrum perde yerleşim durumu için toplam yirmi adet model hazırlanmıştır. Modeller arasındaki davranış farkları; perde taban momentlerindeki, eşdeğer deprem kuvvetleri, yapı rijitliği için yapı periyotları ve deprem deplasmanları, burulma düzensizliği, hasar durumları, radye tasarımı ve maliyet gibi parametreler üzerinden değerlendirilmiştir. Dört cephede perde yerleştirilerek oluşturulan rijit bodrum katın kritik kattaki hasar miktarını artırdığı tüm taşıyıcı sistem tiplerinde gözlenmiştir. Tüm modeller için kritik katlardaki en az hasar bodrum perdesi olmayan modellerinde görülmüştür. Tüm modellerde en yüksek radye temel maliyeti bodrum perdesiz modeller için elde edilirken en düşük radye temel maliyeti ise 4 cepheden bodrum perdeli olan rijit bodrum kata sahip modeller için elde edilmiştir. Radye temel ve üstyapı maliyetleri birleştirilerek elde edilen toplam kaba yapı maliyetleri ise tüm modellerde oldukça yakın sonuçlar vermiştir.


  • COMPARISON OF STRUCTURAL SYSTEM TYPES GIVEN IN TBEC 2018 CODE FOR MID-RISE BUILDINGS WITH LINEAR ANALYSIS METHOD

    by İsmail Ünsal, Nurullah Balca, M. Fatih Şahan

    Bu çalışmada, ülkemizde yapılabilecek 14 katlı betonarme bir konut binası için deprem yönetmeliğinde verilen tasarıma esas olabilecek taşıyıcı sistem türleri karşılaştırmalı olarak irdelenmiştir. Süneklik düzeyi yüksek olan salt çerçeveli, salt perdeli ve plandaki perde oranı düşük ve yüksek olan iki adet çerçeveli-perdeli model tasarlanmıştır. Bunlara ilaveten beşinci model olarak süneklik düzeyi karma çerçeveli-perdeli bir taşıyıcı sistem modeli tasarlanmıştır. Deprem yönetmeliğimizde belirtildiği şekilde dayanıma göre tasarım yaklaşımı ile doğrusal analizler yapılmıştır. Modeller arasında taban kesme kuvveti ve tepe deplasmanı dağılımları karşılaştırılmıştır. Her iki büyüklük için de dağılımların çok büyük oranda 1/R ilişkisine benzer şekilde gerçekleştiği görülmüştür. Çalışma kapsamındaki modeller arasında perde oranı arttıkça maksimum deprem deplasmanları artış göstermiştir. Zemin katlardaki hasar durumuna göre, en fazla hasar salt çerçeveli modelde, en az hasar ise salt perdeli modelde gözlenmiştir. En düşük maliyet salt perdeli model için hesaplanmış olup bu model salt çerçeveli modelin kaba yapı maliyetinden yaklaşık olarak %5 daha ekonomiktir.


  • Effect of fiber ratio on the impact behavior of polypropylene fiber reinforced samples

    by Mehmet Fatih Şahan, Fatih Ali Öncel, İsmail Ünsal

    This study investigated the effect of fiber ratio on the impact behavior of polypropylene fiber reinforced concrete cube and beam samples. Plain concrete mixtures for control samples and polypropylene fiber-reinforced concrete mixtures with fiber ratios of %0.22, %0.44, and %0.66 by volume were prepared. An instrumented drop-weight impact system was used for the dynamic tests. Static compression tests, three-point bending tests, and impact tests were performed on beam samples (with the dimension of 100×100×500 mm). Static compression and impact tests were performed on cube samples (with the size of 100 mm). It was observed that the fracture properties of polypropylene fiber reinforced concrete for both cube and beam samples were better than the control samples under impact. The crack width in the beams under the impact decreased with the increase in polypropylene fiber ratio. The cube and beam concrete samples reinforced with polypropylene fibers absorbed the impact energy better than the control samples.


  • Farklı Lif Oranına Sahip Çelik Lif Takviyeli Beton Kirişlerde Çarpma Etkisi

    by M. Fatih Şahan, İsMail Ünsal

    Bu çalışmada çelik lif takviyeli beton kirişlerde lif oranının eğilmede çarpma davranışına etkisi araştırılmıştır. Çelik lif oranı ile eğilmede çarpma davranışı arasındaki ilişkinin belirlenmesi amacıyla aletli ağırlık düşürme sistemi kullanılmıştır. Çalışma için kontrol karışımının yanı sıra beton hacminin % 0.25 (19.5 kg/m³), % 0.50 (39 kg/m³) ve % 0.75 (58.5 kg/m³) oranlarında çelik lif takviyeli beton karışımları üretilmiştir. Deneyler için 100x100x500 mm boyutlarında kirişler üretilmiştir. Kirişler üzerinde basınç, eğilme ve aletli ağırlık düşürme deneyleri yapılmıştır. Ayrıca ağırlık düşürme deneyleri sonucunda kiriş ortasında meydana gelen çatlak genişliği ölçümü yapılmıştır. Aletli düşen ağırlık sistemi kullanılarak yapılan düşük hızlı darbe deneylerde ise çelik lif takviyeli betonların kontrol numunesine kıyasla ani kırılmaya karşı daha dirençli olduğu görülmüştür. Ayrıca çelik lif miktarının artması ile düşük hızlı darbe deneyi sonucunda kirişlerde oluşan çatlak genişliklerinin azaldığı tespit edilmiştir. Yapılan çalışma sonucunda çelik lifin betonun statik ve dinamik özelliklerine olumlu etkilerinin olduğu görülmüştür.


  • TBDY 2018 Yönetmeliğinde Verilen Süneklik Düzeyi Yüksek Betonarme Taşıyıcı Sistemler için Maliyet ve Deprem Performansı Bakımından Bir Karşılaştırma

    by İsmail Ünsal, M. Fatih Şahan

    Bu çalışmada, “Deprem Etkilerinin Tamamının Moment Aktaran Süneklik Düzeyi Yüksek Betonarme Çerçevelerle Karşılandığı Taşıyıcı Sistemler” ile “Deprem Etkilerinin Tamamının Süneklik Düzeyi Yüksek Boşluksuz Betonarme Perdelerle Karşılandığı Taşıyıcı Sistemler” maliyet ve deprem performansları bakımından karşılaştırmalı olarak irdelenmiştir. Bu amaçla 18 katlı konut tipi bir bina esas alınmış ve her iki taşıyıcı sistemi karşılaştırmak üzere STA4CAD yazılımında iki farklı model hazırlanmıştır. Türkiye Bina Deprem Yönetmeliği-2018 (TBDY 2018) esas alınarak yapılan analizlerden her iki modelle elde edilen maliyetler karşılaştırılmıştır. Çok Modlu İtme Yöntemi kullanılarak yapılan analizler sonucunda elde edilen eleman hasar durumları üzerinden yapılan değerlendirmede perdeli modelin deprem performansının çerçeveli modelin performansından daha iyi olduğu gözlenmiştir. Kaba yapı maliyeti esas alınarak yapılan karşılaştırmada, deprem etkilerinin tamamının betonarme perdelerle karşılandığı taşıyıcı sistem modelinin, deprem etkilerinin tamamının betonarme çerçeveler ile karşılandığı taşıyıcı sistem modeline kıyasla daha ekonomik olduğu gözlenmiştir.