ASAnne-Sophie Schuller

Anne-Sophie Schuller

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anne-Sophie Schuller has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Antimicrobial acrylated epoxidized soybean oil and cinnamyl methacrylate-based thermoresponsive shape-memory photopolymers for microimprint lithography

    by Aistis Lapinskas, Aukse Navaruckiene, Sigita Grauzeliene, Vita Raudoniene, Danguole Bridziuviene, Anne-Sophie Schuller, Christelle Delaite, Jolita Ostrauskaite

    A series of novel photocurable biobased vitrimers, composed of acrylated epoxidized soybean oil (AESO) and cinnamyl methacrylate was developed in this study. Photocuring kinetics, thermal, mechanical and antimicrobial properties were investigated to select the most suitable one for the production of highly antimicrobial and flexible vitrimer for the application in microimprint lithography. The addition of cinnamyl methacrylate in the composition had increased the flexibility and antimicrobial activity of vitrimers, but reduced the photocuring rate, tensile strength and thermal stability. Vitrimer composed of 1 mol of AESO and 5 mol of cinnamyl methacrylate was selected as the most suitable for this technology due to the highest flexibility, thermoresponsive shape-memory properties, and antibacterial activity. The cell reduction rate of this vitrimer against the bacteria E. coli and S. aureus was 100 and 91.3%, respectively, and against the fungi A. niger and A. flavus was 93.1 and 62.0%, respectively. A Life Cycle Assessment, comparing biobased cinnamyl methacrylate vitrimer with petroleum-based vitrimer, showed a 21% reduction in CO 2 emission. The novelty of this study combines the synthesis of cinnamyl methacrylate-based vitrimer with antimicrobial properties and low CO 2 emissions evaluated by LCA study.

  • Open Access

    Photophysically Meaningful Molecular Features Associated with Experimental Triplet-State Lifetimes Revealed by Interpretable Machine Learning

    by Christian Ley, A. Tosif, A.-S. Schuller, Djaffar Ould Abdeslam

    Triplet-state lifetimes are key parameters in photochemistry, photosensitization, photocatalysis, organic optoelectronics and photopolymerization, yet their experimental determination remains demanding and available datasets are generally small and heterogeneous. Here, a curated subset of the Carmichael–Hug compilation was used to develop an interpretable machine-learning model for predicting experimental triplet-state lifetimes from chromophore and solvent structures represented as simplified molecular-input line-entry system (SMILES) strings. Following correlation filtering and Random-Forest-based feature selection, seven ensemble regression algorithms were evaluated using five-fold cross-validation and an independent test set. The optimized Histogram-based Gradient Boosting Regressor provided the best overall performance. Feature-attribution using SHAP (SHapley Additive exPlanations) analysis revealed descriptor–lifetime relationships that were broadly consistent with established triplet-state photophysics. Importantly, these photophysically meaningful trends were recovered using general-purpose descriptors that were not specifically developed for excited-state photochemistry. This work therefore establishes a proof of concept for an interpretable, SMILES-based quantitative structure–property relationship (QSPR) approach to triplet-state lifetime prediction and highlights the need for dedicated structure-derived photophysical descriptors. The resulting framework could support the preliminary screening of new chromophore–solvent combinations and guide the selection of molecules for targeted experimental characterisation.

  • Etude du mécanisme de dispersion de charge dans une résine polyester : Synthèse de nouveaux dispersants

    by Anne-Sophie Schuller

    Afin d'optimiser les propriétés d'un composite polymère chargé, il est possible de procéder à un greffage de la charge afin de la rendre compatible avec le milieu continu dans laquelle elle est dispersée. Le sujet de recherche consiste à étudier et optimiser le mécanisme de greffage de molécules organiques à la surface de charges minérales.Développé il y a quelques années par la société GTI Process (groupe Mader), le "giral" est une formulation qui permet d'une part d'obtenir une bonne dispersion entre une charge et une matrice polymère et d'autre part d'augmenter les propriétés mécaniques du matériau composite final. Il se compose d'un silane, d'un acide méthacrylique et d'un dispersant. Toutefois, le mécanisme existant lors de l'ajout de giral dans une formulation charge/résine n'a pas été identifié. Nous nous sommes proposé de le comprendre. Après avoir identifié les interactions entre la surface de la silice et les constituants du giral, il nous a paru intéressant de faire évoluer la formulation du dispersant.Dans un premier temps, ce mécanisme a été étudié sur une charge témoin bien maîtrisée : la silice.La silice retenue a l'avantage de posséder une surface spécifique importante. Des analyses thermogravimétrique et infrarouge ont été réalisées sur différents échantillons (synthétisés à partir de silice et d'un ou plusieurs constituants du giral) afin de déterminer les espèces adsorbées ou greffées à la surface de la silice. Des analyses RMN du solide 13C et 29Si ont également été réalisées dans le but de déterminer les liaisons mises en jeu. En parallèle, des études en CGI (Chromatographie Gazeuse Inverse) ont été menées.Dans un second temps, des nouvelles structures ont été développées pour améliorer le dispersant contenu dans la formulation du Giral puis la formulation en synthétisant un seul composé qui regroupe toutes les fonctionnalités requises pour disperser la silice dans une résine polyester. De plus, ces nouvelles structures vont permettre d’augmenter les propriétés mécaniques du matériau composite final. Tous les composés synthétisés, dans ce travail, ont un squelette polymère qui est la polycaprolactone. L’architecture, la composition, la taille et la structure de ces polymères ont été optimisées suivant la charge à disperser. Nous avons ainsi synthétisé une large gamme de dispersants modèles fonctionnalisés et étudié leur comportement dans l'application. D'autre part, seules les méthodes de synthèse en masse, plus adaptées pour une production industrielle, ont été retenues. Ces polymères ont tout d'abord été synthétisés en laboratoire puis dans le milieu industriel. Une fois les polymères synthétisés, plusieurs essais ont été réalisés pour connaître leur influence au niveau des propriétés mécaniques du matériau composite final, déterminer les structures les plus adaptées pour répondre aux contraintes mécaniques, et connaître les quantités nécessaires pour obtenir les meilleurs résultats. Des mesures de viscosité et des essais mécaniques (essais de traction et de flexion 3 points) ont été réalisés. L'utilisation de ces composés développés au cours de ce travail de thèse ont permis de diminuer la viscosité d’une résine polyester chargée et ainsi de pouvoir augmenter le taux de charge. De plus, les faciès de rupture ont été observés par microscopie électronique à balayage afin d'observer la cohésion entre les charges et la matrice polymère du composite. La rupture apparaît au niveau de la charge et du polymère. L'efficacité de ces nouvelles structures dans l’application s'est avérée comparable, voire meilleure par rapport au dispersant de référence et au giral.

  • Open Access

    Optimization of the Electrospinning Process to Create an Active Bilayer Nanostructured Wound Dressing Based of PLA and Ibuprofen

    by Anne‐Sophie Schuller, Élise Girault, Amdouni Sonia, Leonard Ionut Atanase, Cristina Elena Horhogea, Floriane Leclinche, Christelle Delaite

    A new bilayer wound dressing structure has been developed by depositing amorphous polylactic acid (PLA) nanofibers on a hydrogel layer composed of gelatin (GE), hyaluronic acid (HA) and zinc oxide (ZnO) particles for its antibacterial properties. The choice of solvent was crucial to optimize electrospinability, productivity, and nanofibers morphology. This study investigated the impact of polymer concentration and electrospinning parameters, such as applied voltage and distance from tip to collector, on nanofibers morphology. To improve the healing process, Ibuprofen (IBU) was encapsulated in PLA nanofibers at a concentration of 5 wt% due to its anti‐inflammatory properties. Differential scanning calorimeter (DSC) analysis confirmed the amorphous nature of PLA, while TGA confirmed the presence of IBU and almost complete evaporation of solvent during the electrospinning process. Scanning electron microscopy (SEM) characterization demonstrated that nanofibers fabricated from PLA/IBU solutions electrospun in acetone at concentrations of 10 wt% and 12.5 wt%, using an applied voltage of 40 kV and a tip‐to‐collector distance of 15 cm, yielded fibers with the most favorable morphological features for the target application. The resulting nanofibers exhibited consistent nanoscale diameters and a smooth, homogeneous surface topology, indicating that these electrospinning parameters represent optimal conditions for achieving high‐quality fiber formation. Antimicrobial analyses were conducted to demonstrate the bilayer dressing's effectiveness in inhibiting or eliminating bacterial growth. These tests aimed to assess the potential of this new dressing as a protective barrier against infection, highlighting its relevance for wound care applications.


  • Open Access

    Antimicrobial Vitrimers Synthesized from Dipentaerythritol Pentaacrylate and 2-Hydroxy-3-phenoxypropyl Acrylate for LCD 3D Printing

    by Vilte Sereikaite, Aukse Navaruckiene, Vita Raudoniene, Danguole Bridziuviene, Paulius Cerkauskas, Saulius Lileikis, Kastytis Pamakstys, Egidija Rainosalo, Anne-Sophie Schuller, Christelle Delaite, et al.

    In this study, two monomers, dipentaerythritol pentaacrylate and 2-hydroxy-3-phenoxypropyl acrylate, were used to synthesize antimicrobial vitrimers with and without a transesterification catalyst and investigate their properties. The addition of the comonomer 2-hydroxy-3-phenoxypropyl acrylate to the photocurable resin reduced its viscosity and shrinkage but increased the gel point and reduced the brittleness and increased flexibility of the resulting polymers. All vitrimers exhibited self-welding and reprocessability properties and thermoresponsive shape memory, maintaining two permanent shapes. All vitrimers showed high antimicrobial activity against widely spread bacteria and fungal strains, including medically important ones. The resin, composed of dipentaerythritol pentaacrylate (1 mol) and 2-hydroxy-3-phenoxypropyl acrylate (10 mol), was applied to LCD 3D printing technology, and the Y-shaped connector was printed. In addition, the antimicrobial activity makes these vitrimers particularly important for use in areas with high microbial concentrations, such as medical facilities.


  • Highly efficient one-pot synthesis of polyesteramides from ɛ-caprolactone and l-phenylalanine with high cell-viability and chemical stability

    by Lina Kadri, Slim Salhi, Anne-Sophie Schuller, Leonard Ionut Atanase, Christelle Delaite, Houcine Ammar


  • Open Access

    Development and Digital Light Processing 3D Printing of a Vitrimer Composed of Glycerol 1,3-Diglycerolate Diacrylate and Tetrahydrofurfuryl Methacrylate

    by Sigita Grauzeliene, Anne-Sophie Schuller, Christelle Delaite, Jolita Ostrauskaite

    The development of biobased reshapable and repairable vitrimers has received extensive attention due to the growing focus on an environmentally friendly society. Therefore, the objective of this research was to synthesize sustainable polymers with an environmentally friendly strategy combining the benefits of renewable resources, UV curing, and vitrimers. Two biobased monomers, glycerol 1,3-diglycerolate diacrylate and tetrahydrofurfuryl methacrylate, were chosen for the preparation of UV-curable resins and tested by real-time photorheometry and RT-FTIR spectroscopy to determine their suitability for digital light processing (DLP) 3D printing. DLP 3D-printed polymer showed shape memory, weldability, and repairability capabilities by triggering the dynamic transesterification process at high temperatures. The vitrimer with a weight ratio of 60:40 of glycerol 1,3-diglycerolate diacrylate and tetrahydrofurfuryl methacrylate showed shape memory properties with a recovery ratio of 100% and a 7-fold improved tensile strength compared to the original sample, confirming efficient weldability and repairability.


  • 3D printed objects obtained by combination of radical photopolymerization and photo sol–gel reaction: towards reinforced thermomechanical properties

    by Lucile Halbardier, Céline Croutxé-Barghorn, Emile Goldbach, Anne-Sophie Schuller, Xavier Allonas

    This paper aims to fabricate reinforced polymeric objects using DLP 3D printing by combining photo sol–gel and radical photopolymerization processes. In order to achieve an efficient development of the inorganic network, the diffusion of humidity was ensured by the choice of the acrylate polymer matrix and was highlighted by ATR-FTIR. The hybrid material was compared to the organic matrix in terms of composition, viscoelasticity and mechanical properties assessed through various analyses (29Si-NMR in the solid state, ATR-FTIR, DMA, tensile test at break). A wet thermal treatment combined with a UV post-cure gives rise to the highest condensation ratio of the inorganic network within the polymer matrix. The Young's modulus of the resultant hybrid material was doubled with only 2.4 wt% of the inorganic phase within the polymer matrix.


  • In situ preparation of compounds using silanized mPEG inspired by talc-like structures

    by Liva Dzene, Anne-Sophie Schuller, Frédéryck Tidas, Séverinne Rigolet, Jocelyne Brendlé, Christelle Delaite

    Composite materials show improved properties compared to pristine materials, in particular when the filler is dispersed homogeneously in the matrix. For polymer–clay composites, different strategies exist to improve clay mineral dispersion in the polymer matrix. In this study, an innovative approach is suggested which consists of forming a talc-like structure directly in a polymer matrix using a silanized polymer as the silicon source. Poly(ethylene glycol) methyl ether of different average molar masses (Mn = 350, 500, 750, 1900 g mol−1) were functionalized with (3-isocyanatopropyl)triethoxysilane and added to the ethanolic solutions of magnesium nitrate. 1H–29Si CPMAS solid state NMR experiments revealed partial condensation of silane compounds, and FTIR analysis confirmed the presence of both Si–O and Mg–O bonds, but an additional proof of the Si–O–Mg bond is needed to prove the formation of such a structure.

  • Open Access

    Combined aza-Michael and radical photopolymerization reactions for enhanced mechanical properties of 3D printed shape memory polymers

    by Lucile Halbardier, Emile Goldbach, Céline Croutxé-Barghorn, Anne-Sophie Schuller, Xavier Allonas

    3D printed shape memory polymers (SMP) were formed by combining aza-Michael addition and light initiated radical polymerization. Amine consumption and acrylate conversion were monitored by 1H-NMR and Fourier transform infrared spectroscopies. Dynamic mechanical analysis and cyclic thermomechanical tensile tests enabled direct observation of the polymer network changes. Increased homogeneity of the 3D network and enhanced SMP properties were achieved after the reaction between residual acrylate functions trapped in the vitrified medium with the secondary amines formed during the process. This allows the fabrication of shape memory objects by 3D printing.