John J. Fitzpatrick
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
John J. Fitzpatrick has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Song Miao
Fujian Agriculture and Forestry University
6 shared publications Edmond P. Byrne
Process & Chemical Engineering, School of Engineering & Architecture , University College Cork , Cork , Ireland
2 shared publications- Edmond Philip Byrne
Sustainability Institute, University College Cork, Ireland / School of Engineering and Architecture, University College Cork, Ireland
2 shared publications - Elisa Michel
Process & Chemical Engineering, School of Engineering, University College Cork, T12 K8AF Cork, Ireland
2 shared publications Fergal Lalor
Process & Chemical Engineering, School of Engineering & Architecture , University College Cork , Cork , Ireland
2 shared publications- Franck Gloanec
Process & Chemical Engineering, School of Engineering, University College Cork, T12 K8AF Cork, Ireland
2 shared publications
Latest Publications
- Open Access
- 30 July 2026
- Published by Walter de Gruyter GmbH in Chemical Product and Process Modeling
Influence of cell death and metabolite inhibition on the performance of fed-batch and perfusion bioreactors: insights from mathematical modelling
Both fed-batch and perfusion bioreactors are used in biopharmaceutical production. This study applies mathematical modelling to investigate the influence of cell death, metabolite inhibition, bioreaction time and cell/metabolite control on bioreactor performance. The performance parameters are titre, productivity, product yield, wasted substrate and mean product residence time ( t res ). Cell death and metabolite inhibition both impact on cell growth and the evolution of viable cell concentration. Major impacts are potential for significantly reducing productivity and increasing t res . Higher values of substrate concentration in media added ( S m ) tends to improve bioreactor performance, however higher S m leads to higher metabolite concentrations, which may contribute to greater metabolite inhibition and reduced bioreactor performance. Consequently, there may exist an optimal S m . Bioreaction time is very important. For perfusion, there exists a bioreaction time where productivity is maximised and t res is minimised. For fed-batch, sufficient bioreaction time is required to increase titre, yield and productivity, however too long a time leads to major progressive reduction in productivity and possibly very long t res . Overall, with inclusion of cell death and metabolite inhibition, perfusion still has an advantage over fed-batch in terms of higher productivities and shorter t res , while obtaining comparable titres and yields.
- 30 July 2026
- Published by Walter de Gruyter GmbH in Chemical Product and Process Modeling
Open AccessInfluence of cell death and metabolite inhibition on the performance of fed-batch and perfusion bioreactors: insights from mathematical modelling
Both fed-batch and perfusion bioreactors are used in biopharmaceutical production. This study applies mathematical modelling to investigate the influence of cell death, metabolite inhibition, bioreaction time and cell/metabolite control on bioreactor performance. The performance parameters are titre, productivity, product yield, wasted substrate and mean product residence time ( t res ). Cell death and metabolite inhibition both impact on cell growth and the evolution of viable cell concentration. Major impacts are potential for significantly reducing productivity and increasing t res . Higher values of substrate concentration in media added ( S m ) tends to improve bioreactor performance, however higher S m leads to higher metabolite concentrations, which may contribute to greater metabolite inhibition and reduced bioreactor performance. Consequently, there may exist an optimal S m . Bioreaction time is very important. For perfusion, there exists a bioreaction time where productivity is maximised and t res is minimised. For fed-batch, sufficient bioreaction time is required to increase titre, yield and productivity, however too long a time leads to major progressive reduction in productivity and possibly very long t res . Overall, with inclusion of cell death and metabolite inhibition, perfusion still has an advantage over fed-batch in terms of higher productivities and shorter t res , while obtaining comparable titres and yields.
- Open Access
How Best to Use Forest Wood for Energy: Perspectives from Energy Efficiency and Environmental Considerations
This paper examines how best to use forest wood for energy application, considering that it is a limited natural resource. Eight systems are considered, including wood stoves, steam systems (boiler, power plant, and combined heat and power (CHP)), and gasification combined systems (gas turbine and combined cycle power plant, CHP, and Fischer–Tropsch). The methodology uses energy analysis and modelling and environmental/sustainability considerations to compare the energy systems. In terms of energy conversion efficiency, steam boilers and high-efficiency wood stoves for heating applications provide the highest efficiencies (~80 to 90%) and should be considered. Steam CHP systems provide lower overall energy conversion efficiencies (~75 to 80%) but do provide some electrical energy, and thus should be considered. The use of wood for the production of electricity on its own should not be considered due to low efficiencies (~20 to 30%). Particulate emissions hinder the application of high-efficiency stoves, especially in urban areas, whereas for industrial-scale steam boilers and CHP systems, particle separators can negate this problem. Gasification/Fischer–Tropsch systems have a lower energy efficiency (~30 to 50%); however, a sustainability argument could be made for liquid fuels that have few sustainable alternatives.
Open AccessHow Best to Use Forest Wood for Energy: Perspectives from Energy Efficiency and Environmental Considerations
This paper examines how best to use forest wood for energy application, considering that it is a limited natural resource. Eight systems are considered, including wood stoves, steam systems (boiler, power plant, and combined heat and power (CHP)), and gasification combined systems (gas turbine and combined cycle power plant, CHP, and Fischer–Tropsch). The methodology uses energy analysis and modelling and environmental/sustainability considerations to compare the energy systems. In terms of energy conversion efficiency, steam boilers and high-efficiency wood stoves for heating applications provide the highest efficiencies (~80 to 90%) and should be considered. Steam CHP systems provide lower overall energy conversion efficiencies (~75 to 80%) but do provide some electrical energy, and thus should be considered. The use of wood for the production of electricity on its own should not be considered due to low efficiencies (~20 to 30%). Particulate emissions hinder the application of high-efficiency stoves, especially in urban areas, whereas for industrial-scale steam boilers and CHP systems, particle separators can negate this problem. Gasification/Fischer–Tropsch systems have a lower energy efficiency (~30 to 50%); however, a sustainability argument could be made for liquid fuels that have few sustainable alternatives.
- Open Access
- 6 May 2025
- Published by MDPI AG in Chemengineering
- Vol. 9 (3) , 48
Influence of Substrate Concentrations on the Performance of Fed-Batch and Perfusion Bioreactors: Insights from Mathematical Modelling
Fed-batch and perfusion bioreactors are commonly used in biopharmaceutical production. This study applies mathematical models to investigate the influence of substrate concentration in the media added (), operating substrate concentration in the bioreactor (), and bioreaction time on the performance of both bioreactors. The performance parameters are titer, productivity, product yield, wasted substrate, and mean product residence time. The difference between the substrate concentration in the media and the operating substrate concentration has a major impact on performance parameters. For a fixed , operating at higher values of is more beneficial to both fed-batch and perfusion performance. Higher productivities are obtained in perfusion, and mean product residence times are shorter. Furthermore, perfusion can obtain titers comparable to fed-batch when operated at similar substrate concentrations. All this suggests that perfusion is more advantageous. It is advantageous to operate the bioreactors over a longer bioreaction time. However, for fed-batch bioreactors, there exists an optimal time after which there is a major progressive reduction in productivity.- 6 May 2025
- Published by MDPI AG in Chemengineering
- Vol. 9 (3) , 48
Open AccessInfluence of Substrate Concentrations on the Performance of Fed-Batch and Perfusion Bioreactors: Insights from Mathematical Modelling
Fed-batch and perfusion bioreactors are commonly used in biopharmaceutical production. This study applies mathematical models to investigate the influence of substrate concentration in the media added (), operating substrate concentration in the bioreactor (), and bioreaction time on the performance of both bioreactors. The performance parameters are titer, productivity, product yield, wasted substrate, and mean product residence time. The difference between the substrate concentration in the media and the operating substrate concentration has a major impact on performance parameters. For a fixed , operating at higher values of is more beneficial to both fed-batch and perfusion performance. Higher productivities are obtained in perfusion, and mean product residence times are shorter. Furthermore, perfusion can obtain titers comparable to fed-batch when operated at similar substrate concentrations. All this suggests that perfusion is more advantageous. It is advantageous to operate the bioreactors over a longer bioreaction time. However, for fed-batch bioreactors, there exists an optimal time after which there is a major progressive reduction in productivity. - 24 January 2023
- Published by Walter de Gruyter GmbH in Chemical Product and Process Modeling
- Vol. 18 (4) , 671-689
Investigating the energy, environmental, and economic challenges and opportunities associated with steam sterilisation autoclaves
Despite steam sterilisation in autoclaves being a common industrial method of sterilisation, very little research has been conducted into quantifying the resources these processes demand and their associated environmental impacts. This paper aims to investigate industrial steam sterilisation in autoclaves with particular application to the biopharmaceutical industry. A mathematical model of a steam autoclave was developed to examine relationships between load size, load material properties and autoclave capacity with energy consumption, environmental impact and cost of sterilisation. The two main energy requirements are thermal energy to produce the clean steam for sterilising, and electrical energy for the vacuum pump. The study showed that thermal energy is dominant, particularly as load increases. The percentage of the maximum load at which the autoclave is operated has a major impact on the specific energy requirement or the energy required to sterilise per unit mass of load. For a given autoclave, the energy requirement increases with increased load but the specific energy requirement decreases. This in turn impacts on the emissions and the energy cost. It is thus shown that it is much more energy efficient to operate at higher loads, making the autoclave much more energy and cost effective, and with less environmental impact. There is potential for applying the analysis presented in this work for conducting optimisation studies for determining the sizes of autoclaves that could minimise the energy requirement, environmental impact and economic cost (3E) of investments for specified load versus time profiles.
- 24 January 2023
- Published by Walter de Gruyter GmbH in Chemical Product and Process Modeling
- Vol. 18 (4) , 671-689
Investigating the energy, environmental, and economic challenges and opportunities associated with steam sterilisation autoclaves
Despite steam sterilisation in autoclaves being a common industrial method of sterilisation, very little research has been conducted into quantifying the resources these processes demand and their associated environmental impacts. This paper aims to investigate industrial steam sterilisation in autoclaves with particular application to the biopharmaceutical industry. A mathematical model of a steam autoclave was developed to examine relationships between load size, load material properties and autoclave capacity with energy consumption, environmental impact and cost of sterilisation. The two main energy requirements are thermal energy to produce the clean steam for sterilising, and electrical energy for the vacuum pump. The study showed that thermal energy is dominant, particularly as load increases. The percentage of the maximum load at which the autoclave is operated has a major impact on the specific energy requirement or the energy required to sterilise per unit mass of load. For a given autoclave, the energy requirement increases with increased load but the specific energy requirement decreases. This in turn impacts on the emissions and the energy cost. It is thus shown that it is much more energy efficient to operate at higher loads, making the autoclave much more energy and cost effective, and with less environmental impact. There is potential for applying the analysis presented in this work for conducting optimisation studies for determining the sizes of autoclaves that could minimise the energy requirement, environmental impact and economic cost (3E) of investments for specified load versus time profiles.
- 8 May 2022
- Published by Elsevier in Food Chemistry
- Vol. 391, 133179
Breakage behaviour and functionality of spray-dried agglomerated model infant milk formula: Effect of proteins and carbohydrates content
- 8 May 2022
- Published by Elsevier in Food Chemistry
- Vol. 391, 133179
Breakage behaviour and functionality of spray-dried agglomerated model infant milk formula: Effect of proteins and carbohydrates content
- 1 December 2021
- Published by Elsevier in Food Research International
- Vol. 150 (Pt A) , 110797
Enhanced rehydration behaviors of micellar casein powder: The effects of high hydrostatic pressure treatments on micelle structures
- 1 December 2021
- Published by Elsevier in Food Research International
- Vol. 150 (Pt A) , 110797
Enhanced rehydration behaviors of micellar casein powder: The effects of high hydrostatic pressure treatments on micelle structures
- 30 October 2020
- Published by Springer Nature
- p. 91-108
Characterisation of the Rehydration Behaviour of Food Powders
- 30 October 2020
- Published by Springer Nature
- p. 91-108
Characterisation of the Rehydration Behaviour of Food Powders
- 30 October 2020
- Published by Springer Nature
- p. 73-89
Characterization of the Caking Behaviour of Food Powders
- 30 October 2020
- Published by Springer Nature
- p. 73-89
Characterization of the Caking Behaviour of Food Powders