Tzung-Ming Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tzung-Ming Chen has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Dar-Jen Pen
Intelligent Machinery Technology Center, Industrial Technology Research Institute, Taichung, Taiwan
1 shared publication - Dong-Shyen Yang
Department of Mechanical Engineering and Graduate Institute of Manufacturing Technology, Chienkuo Technology University, Changhua, Taiwan
1 shared publication Hsin-Min Lee
Army Acad, Dept Mech & Comp Aided Engn, Longdong Rd, Taoyuan City 320316, Taiwan
1 shared publication- Jia-Qi Wu
Department of Industrial Education and Technology, Bao-Shan Campus, National Changhua University of Education, No. 2, Shi-Da Road, Changhua 500, Taiwan
1 shared publication - Jian-Ting Lin
Department of Industrial Education and Technology, Bao-Shan Campus, National Changhua University of Education, No. 2, Shi-Da Road, Changhua 500, Taiwan
1 shared publication Kang-Feng Peng
Natl Cent Univ, Dept Mech Engn, 300 Zhongda Rd, Taoyuan City 320317, Taiwan
1 shared publication
Latest Publications
- Open Access
- 17 November 2023
- Published by MYU K.K. in Sensors and Materials
- Vol. 35 (11) , 3697-3711
Surface Quality Control of p-type Silicon Chip during Edge Insulation with Wire Electric Dischaarge Machining
- 17 November 2023
- Published by MYU K.K. in Sensors and Materials
- Vol. 35 (11) , 3697-3711
Open AccessSurface Quality Control of p-type Silicon Chip during Edge Insulation with Wire Electric Dischaarge Machining
- Open Access
- 22 August 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (17) , 12683
Classification of 3D Casting Models for Product Lifecycle Management and Corporate Sustainability
The purpose of this study was to combine simulations and experiments in order to present the first stage of construction in product lifecycle management. Based on the simplification of casting models, the relationship between the filling and solidification characteristics, casting methods, and geometrical classifications of aluminum alloy precision casting products was investigated. By rearranging and summarizing the data, the casting models could be digitally managed; moreover, the digitized data could be used as the basis for intelligent processes in further developments. The simulations calculated and analyzed the casting speeds, defect locations, material densities, and critical fraction of a solid A356 aluminum–silicon alloy; the actual casting was carried out and samples were taken for metallographic observation to confirm the simulation results. The part model was simplified with four basic geometric shapes: solid cylinder, tubular, block rectangle, and thin-shell rectangle. The 150 casting models were summarized using 37 combinations, which were further classified into five main categories to match the casting method: solid cylindrical, tubular, and thin-shell rectangular for side casting, and discoidal and plate rectangular for bottom casting. File-compression rates of up to 75% were achieved after classification and archiving, and data integrity was maintained. Finally, model training using random forest classification resulted in an 88.8% accuracy when predicting the casting method. This research is based on the practical issues raised by business owners and R&D engineers, and a solution was obtained. From the perspective of product lifecycle management, the results of this study show the consistency and uniformity of product design rules, as well as the reusability of product process planning, which can be integrated with carbon emissions trading and carbon taxes to save energy and achieve corporate sustainability.
- 22 August 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (17) , 12683
Open AccessClassification of 3D Casting Models for Product Lifecycle Management and Corporate Sustainability
The purpose of this study was to combine simulations and experiments in order to present the first stage of construction in product lifecycle management. Based on the simplification of casting models, the relationship between the filling and solidification characteristics, casting methods, and geometrical classifications of aluminum alloy precision casting products was investigated. By rearranging and summarizing the data, the casting models could be digitally managed; moreover, the digitized data could be used as the basis for intelligent processes in further developments. The simulations calculated and analyzed the casting speeds, defect locations, material densities, and critical fraction of a solid A356 aluminum–silicon alloy; the actual casting was carried out and samples were taken for metallographic observation to confirm the simulation results. The part model was simplified with four basic geometric shapes: solid cylinder, tubular, block rectangle, and thin-shell rectangle. The 150 casting models were summarized using 37 combinations, which were further classified into five main categories to match the casting method: solid cylindrical, tubular, and thin-shell rectangular for side casting, and discoidal and plate rectangular for bottom casting. File-compression rates of up to 75% were achieved after classification and archiving, and data integrity was maintained. Finally, model training using random forest classification resulted in an 88.8% accuracy when predicting the casting method. This research is based on the practical issues raised by business owners and R&D engineers, and a solution was obtained. From the perspective of product lifecycle management, the results of this study show the consistency and uniformity of product design rules, as well as the reusability of product process planning, which can be integrated with carbon emissions trading and carbon taxes to save energy and achieve corporate sustainability.
- 1 June 2022
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 64 (6) , 809-819
Strength decay of wire ropes by corrosion and wear at different surface conditions
The purpose of this study was to investigate the performance of different lubricated and protective conditions of wire ropes. The failure behaviors of wire ropes under different surface conditions were evaluated by using salt spray, wear, and tensile testing. The four surface conditions of the test wire ropes included naked wire and wires coated with wire rope oil, 85W/140 gear oil, and grease, respectively. The potentiodynamic polarization curves revealed that the naked wire was more easily corroded in 3.5% aqueous NaCl solution than in 5%. The results indicated that only the specimen coated with wire rope oil showed no corrosion in the 5% aqueous solution after nine days of the salt spray, and likewise this specimen was not characterized by long distance scratches in a starvation lubrication condition, causing the wire’s tensile strength underwent almost no degradation. Furthermore, the uncertain performance of grease restricted the applications of wire ropes in corrosive environment.
- 1 June 2022
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 64 (6) , 809-819
Strength decay of wire ropes by corrosion and wear at different surface conditions
The purpose of this study was to investigate the performance of different lubricated and protective conditions of wire ropes. The failure behaviors of wire ropes under different surface conditions were evaluated by using salt spray, wear, and tensile testing. The four surface conditions of the test wire ropes included naked wire and wires coated with wire rope oil, 85W/140 gear oil, and grease, respectively. The potentiodynamic polarization curves revealed that the naked wire was more easily corroded in 3.5% aqueous NaCl solution than in 5%. The results indicated that only the specimen coated with wire rope oil showed no corrosion in the 5% aqueous solution after nine days of the salt spray, and likewise this specimen was not characterized by long distance scratches in a starvation lubrication condition, causing the wire’s tensile strength underwent almost no degradation. Furthermore, the uncertain performance of grease restricted the applications of wire ropes in corrosive environment.
- 6 January 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 119 (5-6) , 3395-3405
Using atomic response time to explore the effect of strain rate on yielding behaviors of tensile Cu nanowire with the molecular dynamic method
- 6 January 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 119 (5-6) , 3395-3405
Using atomic response time to explore the effect of strain rate on yielding behaviors of tensile Cu nanowire with the molecular dynamic method