James Johnson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
James Johnson has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Viktoriya Yarushina
Institute for Energy Technology
3 shared publications Daniel Kiss
2 shared publications- Jamilur Rahman
Department of Geosciences, University of Oslo (UiO), 0371 Oslo, Norway
2 shared publications - Nazmul Haque Mondol
Department of Geosciences University of Oslo Oslo Norway
2 shared publications Reinier van Noort
2 shared publicationsDavid Johnson
1 shared publication
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Analogue modeling of non-reactive gas transport through porous media utilizing a microfluidic cell, in the context of He/H2 migration
Helium, like hydrogen, are critical resources essential to the energy transition. Despite different end uses for helium (e.g., coolant for fission and fusion reactors) and hydrogen (e.g., energy – storage, fuel), the two gases share key similarities, while also having some notable differences. It has been established that they have overlapping source mechanisms (e.g., radioactive decay within basement rocks, radiolysis associated with shales, etc.) resulting in the two gases being co-located in a number of exploration wells globally. Likewise, due to a similarity in the kinetic diameters of the molecules although not the reactive nature of them, physical traps that work for hydrogen, should in principle also work for helium. However, transport and trapping of these molecules are affected by a number of competing factors. Therefore, the transport mechanisms and rates at both a basin and pore-scale remain poorly understood.Here we explore the nature of helium and hydrogen transport within porous media utilizing a microfluidic cell, representative of typical upper-crustal siliciclastics found in the subsurface, in combination with time-lapsed geometrical image analysis. At the pore scale, concentration of both elements (i.e. He, H2) within the pore space are dependent on a number of factors, including (1) the number of ejection pulses from a given source migrating through the same pore space, (2) the rate of arrival from the source, and (3) the impact of local hydrological currents on the pore space.The laboratory experiments are combined with numerical modeling of multiphase fluid flow in porous media using a continuum approach. These models allow pore-scale observations from the microfluidic experiments to be upscaled, providing insight into the influence of flow rate, injection cyclicity, and permeability heterogeneity on gas migration and plume stability at the reservoir scale.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessAnalogue modeling of non-reactive gas transport through porous media utilizing a microfluidic cell, in the context of He/H2 migration
Helium, like hydrogen, are critical resources essential to the energy transition. Despite different end uses for helium (e.g., coolant for fission and fusion reactors) and hydrogen (e.g., energy – storage, fuel), the two gases share key similarities, while also having some notable differences. It has been established that they have overlapping source mechanisms (e.g., radioactive decay within basement rocks, radiolysis associated with shales, etc.) resulting in the two gases being co-located in a number of exploration wells globally. Likewise, due to a similarity in the kinetic diameters of the molecules although not the reactive nature of them, physical traps that work for hydrogen, should in principle also work for helium. However, transport and trapping of these molecules are affected by a number of competing factors. Therefore, the transport mechanisms and rates at both a basin and pore-scale remain poorly understood.Here we explore the nature of helium and hydrogen transport within porous media utilizing a microfluidic cell, representative of typical upper-crustal siliciclastics found in the subsurface, in combination with time-lapsed geometrical image analysis. At the pore scale, concentration of both elements (i.e. He, H2) within the pore space are dependent on a number of factors, including (1) the number of ejection pulses from a given source migrating through the same pore space, (2) the rate of arrival from the source, and (3) the impact of local hydrological currents on the pore space.The laboratory experiments are combined with numerical modeling of multiphase fluid flow in porous media using a continuum approach. These models allow pore-scale observations from the microfluidic experiments to be upscaled, providing insight into the influence of flow rate, injection cyclicity, and permeability heterogeneity on gas migration and plume stability at the reservoir scale.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Focused fluid flow: the mechanisms, geological impacts, and insights from analogue and numerical modeling
Research on naturally occurring fluid migration within geological systems under higher pressures and temperatures has shown the ability for gas to be released with different physical mechanisms leading to formation of various geological structures (e.g., gas chimneys, volcanic diatremes, hydrothermal vents, salt diapirism). More recently, it has been suggested that such systems could result from fluid injection into the subsurface (e.g., CO2 sequestration, H2 storage as a battery). Focused fluid flow is often transient and self-organizing, occurring within a local area in reaction to changing temperatures and pressures (e.g., overpressure). Once started, a feedback loop between fluid pressure, media deformation, and permeability can occur resulting in a continuous fluid seepage. Geological evidence across a broad swathe of systems highlights that during and after the vertical fluid flow has occurred, there is a significant, localized impact on the geological fabric of the subsurface. Focused fluid flow is a phenomenon that could manifest within ductile deformation settings at lower fluid pressures than those associated with brittle stress behaviour (i.e., fractures), but higher fluid pressures than what is seen when solely diffusion occurs. As such, the impact on the surrounding media also varies. With higher pressures, fracturing (i.e. failure) of the media occurs. Heterogenous layering roughly parallel with the planetary surface will work to impede vertical propagation resulting in a series of oblique, but often interconnected pathways. With lower pressures, diffusion occurs, potentially resulting in geochemical and minor physical alterations to media with higher transmissibility. However, diffusion lacks the necessary pressure to bypass sections of lower transmissibility. At these intermediate pressures, porosity waves can develop, facilitating the movement of fluids through localized, transient increases in porosity within the medium. These waves enable fluid transport even in regions of relatively low permeability by temporarily enhancing the pore space without causing structural failure. The result is a dynamic interplay between pressure gradients, fluid viscosity, and the mechanical properties of the surrounding media. This interplay leads to significant changes in fluid distribution, mineralization patterns, and the potential for localized geochemical reactions.Here we utilize analogue and numerical modelling of focused fluid flow in order to better understand the geological and injection engineering principles that could lead to the narrow range of conditions under which porosity waves could breach sections of lower transmissibility without fracturing it. Our modelling identifies key parameters of these systems that could help us better understand both the natural and the geo-engineered, including (1) proximity to surface, (2) strength of the host rock, (3) mechanical anisotropy, and (4) injection rates and amounts. For the analogue modelling we use a Hele-Shaw cell wherein we inject a lower density fluid into a viscoelastic hydrogel. By varying the injection rate we are able to identify the narrow range within which porosity waves occur. For numerical modelling we use a finite difference pseudo-transient methods to simulate coupled fluid flow and mechanical deformation in heterogeneous media. The numerical model is calibrated using results from the Hele-Shaw cell experiments, ensuring consistency between analogue and numerical observations.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessFocused fluid flow: the mechanisms, geological impacts, and insights from analogue and numerical modeling
Research on naturally occurring fluid migration within geological systems under higher pressures and temperatures has shown the ability for gas to be released with different physical mechanisms leading to formation of various geological structures (e.g., gas chimneys, volcanic diatremes, hydrothermal vents, salt diapirism). More recently, it has been suggested that such systems could result from fluid injection into the subsurface (e.g., CO2 sequestration, H2 storage as a battery). Focused fluid flow is often transient and self-organizing, occurring within a local area in reaction to changing temperatures and pressures (e.g., overpressure). Once started, a feedback loop between fluid pressure, media deformation, and permeability can occur resulting in a continuous fluid seepage. Geological evidence across a broad swathe of systems highlights that during and after the vertical fluid flow has occurred, there is a significant, localized impact on the geological fabric of the subsurface. Focused fluid flow is a phenomenon that could manifest within ductile deformation settings at lower fluid pressures than those associated with brittle stress behaviour (i.e., fractures), but higher fluid pressures than what is seen when solely diffusion occurs. As such, the impact on the surrounding media also varies. With higher pressures, fracturing (i.e. failure) of the media occurs. Heterogenous layering roughly parallel with the planetary surface will work to impede vertical propagation resulting in a series of oblique, but often interconnected pathways. With lower pressures, diffusion occurs, potentially resulting in geochemical and minor physical alterations to media with higher transmissibility. However, diffusion lacks the necessary pressure to bypass sections of lower transmissibility. At these intermediate pressures, porosity waves can develop, facilitating the movement of fluids through localized, transient increases in porosity within the medium. These waves enable fluid transport even in regions of relatively low permeability by temporarily enhancing the pore space without causing structural failure. The result is a dynamic interplay between pressure gradients, fluid viscosity, and the mechanical properties of the surrounding media. This interplay leads to significant changes in fluid distribution, mineralization patterns, and the potential for localized geochemical reactions.Here we utilize analogue and numerical modelling of focused fluid flow in order to better understand the geological and injection engineering principles that could lead to the narrow range of conditions under which porosity waves could breach sections of lower transmissibility without fracturing it. Our modelling identifies key parameters of these systems that could help us better understand both the natural and the geo-engineered, including (1) proximity to surface, (2) strength of the host rock, (3) mechanical anisotropy, and (4) injection rates and amounts. For the analogue modelling we use a Hele-Shaw cell wherein we inject a lower density fluid into a viscoelastic hydrogel. By varying the injection rate we are able to identify the narrow range within which porosity waves occur. For numerical modelling we use a finite difference pseudo-transient methods to simulate coupled fluid flow and mechanical deformation in heterogeneous media. The numerical model is calibrated using results from the Hele-Shaw cell experiments, ensuring consistency between analogue and numerical observations.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Analogue and numerical modelling of rock deformation due to subsurface compressed gas storage
Storage of compressed gases in lined rock caverns (LRC) has been proposed in order to buffer the peaks of energy intake/output for industrial/renewable systems. LRCs consist of a thin (1-2 cm) steel liner to ensure gas tightness, surrounded by a concrete layer (0.5-2 m) to transmit stresses to the host rock which acts as a pressure vessel. Advantages of storage in such underground LRCs when compared to storage in tanks on the surface or on the seabed include (1) increased safety, and potentially (2) increased storage capacity.Pilot studies exploring the feasibility for LRC storage have been carried out showing the potential for the technology (e.g. Grängesberg, Sweden; Skallen, Sweden; ANGAS, Japan). All three test facilities demonstrated that it is possible to reach a gas pressure that is at least 20 times larger than the lithostatic pressure without compromising the integrity of the LRC. While these pilot tests are valuable for demonstrating the potential of the LRC technology, it is not possible to extrapolate safe operating conditions for future scenarios (e.g. shallower depths, different rock types). As a result, widespread adoption of LRC storage is hindered by uncertainty. Our focus is operating pressure, which scales roughly with storage capacity, and thus has a direct impact on LRC profitability.In this study we will present results of analogue and numerical models. We focus on brittle deformation in the host rock due to the load exerted by a pressurized cavity. Our specific goal is to determine the extent of safely acceptable brittle deformation, and to identify useful indicators of storage integrity to be monitored during initial pressurization tests and continuous operation. Our analogue modelling of this system identifies key parameters that influence the potential success of these projects including (1) proximity to surface, (2) strength of the host rock, (3) mechanical anisotropy, (4) injection rate and amount, and (5) type of liner(s) applied. For the analogue modelling we use gelatin to represent a shallow competent host rock (e.g. granite, gneiss). A hole placed centrally on one side of the cell allows for the injection of compressed air. Utilizing a balloon placed within the hole, the compressed air acts on the liner until the stress applied by the forced air results in visible strain (i.e. fracturing). For the numerical modelling we use a 2D, visco-elasto-plastic, finite difference, hydro-mechanical code utilizing a pseudo-transient solver running on GPUs. The main goal is to cross-validate the results of the two independent methods, and to provide a straightforward way to extrapolate from laboratory simulation to real world conditions.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessAnalogue and numerical modelling of rock deformation due to subsurface compressed gas storage
Storage of compressed gases in lined rock caverns (LRC) has been proposed in order to buffer the peaks of energy intake/output for industrial/renewable systems. LRCs consist of a thin (1-2 cm) steel liner to ensure gas tightness, surrounded by a concrete layer (0.5-2 m) to transmit stresses to the host rock which acts as a pressure vessel. Advantages of storage in such underground LRCs when compared to storage in tanks on the surface or on the seabed include (1) increased safety, and potentially (2) increased storage capacity.Pilot studies exploring the feasibility for LRC storage have been carried out showing the potential for the technology (e.g. Grängesberg, Sweden; Skallen, Sweden; ANGAS, Japan). All three test facilities demonstrated that it is possible to reach a gas pressure that is at least 20 times larger than the lithostatic pressure without compromising the integrity of the LRC. While these pilot tests are valuable for demonstrating the potential of the LRC technology, it is not possible to extrapolate safe operating conditions for future scenarios (e.g. shallower depths, different rock types). As a result, widespread adoption of LRC storage is hindered by uncertainty. Our focus is operating pressure, which scales roughly with storage capacity, and thus has a direct impact on LRC profitability.In this study we will present results of analogue and numerical models. We focus on brittle deformation in the host rock due to the load exerted by a pressurized cavity. Our specific goal is to determine the extent of safely acceptable brittle deformation, and to identify useful indicators of storage integrity to be monitored during initial pressurization tests and continuous operation. Our analogue modelling of this system identifies key parameters that influence the potential success of these projects including (1) proximity to surface, (2) strength of the host rock, (3) mechanical anisotropy, (4) injection rate and amount, and (5) type of liner(s) applied. For the analogue modelling we use gelatin to represent a shallow competent host rock (e.g. granite, gneiss). A hole placed centrally on one side of the cell allows for the injection of compressed air. Utilizing a balloon placed within the hole, the compressed air acts on the liner until the stress applied by the forced air results in visible strain (i.e. fracturing). For the numerical modelling we use a 2D, visco-elasto-plastic, finite difference, hydro-mechanical code utilizing a pseudo-transient solver running on GPUs. The main goal is to cross-validate the results of the two independent methods, and to provide a straightforward way to extrapolate from laboratory simulation to real world conditions.
- Open Access
- 4 November 2022
- Published by MDPI AG in Geosciences
- Vol. 12 (11) , 407
Characterization of Upper Jurassic Organic-Rich Caprock Shales in the Norwegian Continental Shelf
Characterizing the top seal integrity of organic-rich caprock shale is critical in hydrocarbon exploration and fluid storage sites assessment because the caprock acts as a barrier to the low-density upward migrating fluids. This study investigated the geomechanical properties of the Upper Jurassic caprock shales of various basins from the Norwegian Continental Shelf. Usually, paleo-deposition and diagenesis vary from basin to basin, which influences the geomechanical properties of caprock shale; hence, the seal integrity. Fourteen (14) wells from four (4) different basins within the Norwegian Continental Shelf were analyzed to evaluate the effects of various processes acting on caprock properties. Comparative mineralogy-based caprock properties were also investigated. We include a thorough review of the distribution of organic and inorganic components utilizing SEM and 3D microtomography as they relate to the development and propagation of microfractures. Five (5) wells from three (3) basins contain measured shear sonic logs. These wells were used for petrophysics and rock physics analysis. Three elastic properties-based brittleness indices were estimated and compared. The percentage of different mineral fractions of the studied wells varied significantly between the studied basins, which is also reflected in the mineralogical brittleness indices evaluation. Irrespective of the studied basins, relative changes in caprock properties between wells have been observed. The Young’s Modulus–Poisson’s ratio-based empirical equation underestimated the brittleness indices compared with mineralogy- and acoustic properties-based brittleness estimation. A better match has been observed between the mineralogy- and acoustic properties-based brittleness indices. However, as both methods have limitations, an integrated approach is recommended to evaluate the brittleness indices. Brittleness indices are a qualitative assessment of the top seal; hence, further investigation is required to quantify sealing integrity.
- 4 November 2022
- Published by MDPI AG in Geosciences
- Vol. 12 (11) , 407
Open AccessCharacterization of Upper Jurassic Organic-Rich Caprock Shales in the Norwegian Continental Shelf
Characterizing the top seal integrity of organic-rich caprock shale is critical in hydrocarbon exploration and fluid storage sites assessment because the caprock acts as a barrier to the low-density upward migrating fluids. This study investigated the geomechanical properties of the Upper Jurassic caprock shales of various basins from the Norwegian Continental Shelf. Usually, paleo-deposition and diagenesis vary from basin to basin, which influences the geomechanical properties of caprock shale; hence, the seal integrity. Fourteen (14) wells from four (4) different basins within the Norwegian Continental Shelf were analyzed to evaluate the effects of various processes acting on caprock properties. Comparative mineralogy-based caprock properties were also investigated. We include a thorough review of the distribution of organic and inorganic components utilizing SEM and 3D microtomography as they relate to the development and propagation of microfractures. Five (5) wells from three (3) basins contain measured shear sonic logs. These wells were used for petrophysics and rock physics analysis. Three elastic properties-based brittleness indices were estimated and compared. The percentage of different mineral fractions of the studied wells varied significantly between the studied basins, which is also reflected in the mineralogical brittleness indices evaluation. Irrespective of the studied basins, relative changes in caprock properties between wells have been observed. The Young’s Modulus–Poisson’s ratio-based empirical equation underestimated the brittleness indices compared with mineralogy- and acoustic properties-based brittleness estimation. A better match has been observed between the mineralogy- and acoustic properties-based brittleness indices. However, as both methods have limitations, an integrated approach is recommended to evaluate the brittleness indices. Brittleness indices are a qualitative assessment of the top seal; hence, further investigation is required to quantify sealing integrity.
- Open Access
- 6 January 2022
- Published by Elsevier in Marine and Petroleum Geology
- Vol. 138
Mapping the maturity of organic-rich shale with combined geochemical and geophysical data, Draupne Formation, Norwegian Continental Shelf
- 6 January 2022
- Published by Elsevier in Marine and Petroleum Geology
- Vol. 138
Open AccessMapping the maturity of organic-rich shale with combined geochemical and geophysical data, Draupne Formation, Norwegian Continental Shelf