Mohamad Ridzuan Mohamad Kamal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohamad Ridzuan Mohamad Kamal has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Rahaini Mohd Said
Fakulti Teknologi dan Kejuruteraan Elektronik dan Komputer, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
3 shared publications - Nor Hafizah Hussin
Fakulti Teknologi dan Kejuruteraan Elektronik dan Komputer, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
2 shared publications - Adam Samsudin
Fakulti Teknologi dan Kejuruteraan Elektrik, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
1 shared publication - Aminah Ahmad
Faculty of Electrical and Electronic Engineering Technology, Universiti Teknikal Malaysia Melaka, 76100 Melaka, Malaysia
1 shared publication - Eko Arip Winanto
Universitas Dinamika Bangsa
1 shared publication - Mohammad Na’aIm Abd Rahim
Faculty of Industrial and Manufacturing Technology and Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
1 shared publication
Latest Publications
- Open Access
- 30 July 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Mechanics
- Vol. 121 (1) , 13-26
Modeling and Prediction of The Mechanical Properties of Feedstock by Cooling-Slope Casting Process using MOJaya Algorithm
Cooling-slope (CS) casting parameters optimization is very challenging due to the uncertainties of parameter values that are influenced by many factors. Therefore, a combination of estimation and optimization models that can solve multi-objective problems using limited data is proposed to reduce the real casting operational cost and time. In casting optimization, modeling and optimization of CS parameters have been considered to identify optimal CS parameters that would lead to better feedstock performance. Computational techniques have been suggested by previous researchers to solve the optimization in the manufacturing process. The study assessed the CS process to determine the feedstock's quality by evaluating its mechanical qualities, namely Tensile strength and Impact strength. Hence, computational methods namely the MOJaya algorithm are utilized to model and optimize the parameters of CS to address the CS problem and forecast the performance of the feedstock. This work conducted a thorough analysis of the impact of CS process parameters on the tensile strength and impact strength using an experimental design. The experiment was conducted using a three-level full factorial design (FFD) of the experiment (DOE), for the parameters of pouring temperature, slanting angle, and pouring distance. The modeling technique involved the development of multiple polynomial regression (MPR) as an objective function in the MOJaya Algorithm. The outcome of the optimization procedure revealed that the optimal solutions obtained from MOJaya were projected to surpass both the initial experimental data and the MOJaya algorithm in terms of the highest values of tensile strength and impact strength. The difference between the two sets of values is 10.92% and 15.76%, respectively. Subsequently, this technique may be employed by a caster to forecast the performance of the feedstock without using repeated experiments that are costly and time-consuming.
- 30 July 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Mechanics
- Vol. 121 (1) , 13-26
Open AccessModeling and Prediction of The Mechanical Properties of Feedstock by Cooling-Slope Casting Process using MOJaya Algorithm
Cooling-slope (CS) casting parameters optimization is very challenging due to the uncertainties of parameter values that are influenced by many factors. Therefore, a combination of estimation and optimization models that can solve multi-objective problems using limited data is proposed to reduce the real casting operational cost and time. In casting optimization, modeling and optimization of CS parameters have been considered to identify optimal CS parameters that would lead to better feedstock performance. Computational techniques have been suggested by previous researchers to solve the optimization in the manufacturing process. The study assessed the CS process to determine the feedstock's quality by evaluating its mechanical qualities, namely Tensile strength and Impact strength. Hence, computational methods namely the MOJaya algorithm are utilized to model and optimize the parameters of CS to address the CS problem and forecast the performance of the feedstock. This work conducted a thorough analysis of the impact of CS process parameters on the tensile strength and impact strength using an experimental design. The experiment was conducted using a three-level full factorial design (FFD) of the experiment (DOE), for the parameters of pouring temperature, slanting angle, and pouring distance. The modeling technique involved the development of multiple polynomial regression (MPR) as an objective function in the MOJaya Algorithm. The outcome of the optimization procedure revealed that the optimal solutions obtained from MOJaya were projected to surpass both the initial experimental data and the MOJaya algorithm in terms of the highest values of tensile strength and impact strength. The difference between the two sets of values is 10.92% and 15.76%, respectively. Subsequently, this technique may be employed by a caster to forecast the performance of the feedstock without using repeated experiments that are costly and time-consuming.
- Open Access
- 14 March 2024
- Published by Universiti Putra Malaysia in Pertanika Journal of Science and Technology
- Vol. 32 (2) , 573-597
Modelling and Optimisation of Cooling-slope Parameters of Magnesium AZ91D using Improvement Multi-Objective Jaya Approach for Predicted Feedstock Performance
The cooling-slope (CS) casting technique is one of the simple semi-solid processing (SSP) processes a foundryman uses to produce the feedstock. This study attempts to develop mathematical regression models and optimise the CS parameters process for predicting optimal feedstock performance, which utilises tensile strength and impact strength to reduce the number of experimental runs and material wastage. This study considers several parameters, including pouring temperature, pouring distance, and slanting angles for producing quality feedstock. Hence, multi-objective optimisation (MOO) techniques using computational approaches utilised alongside the caster while deciding to design are applied to help produce faster and more accurate output. The experiment was performed based on the full factorial design (FFD). Then, mathematical regression models were developed from the data obtained and implemented as an objective function equation in the MOO optimisation process. In this study, MOO named multi-objective Jaya (MOJaya) was improved in terms of hybrid MOJaya and inertia weight with archive K-Nearest Neighbor (MOiJaya-aKNN) algorithm. The proposed algorithm was improved in terms of the search process and archive selection to achieve a better feedstock performance through the CS. The study’s findings showed that the values of tensile and impact strengths from MOiJaya_aKNN are close to the experiment values. The results show that the hybrid MOJaya has improved the prediction of feedstock using optimal CS parameters.
- 14 March 2024
- Published by Universiti Putra Malaysia in Pertanika Journal of Science and Technology
- Vol. 32 (2) , 573-597
Open AccessModelling and Optimisation of Cooling-slope Parameters of Magnesium AZ91D using Improvement Multi-Objective Jaya Approach for Predicted Feedstock Performance
The cooling-slope (CS) casting technique is one of the simple semi-solid processing (SSP) processes a foundryman uses to produce the feedstock. This study attempts to develop mathematical regression models and optimise the CS parameters process for predicting optimal feedstock performance, which utilises tensile strength and impact strength to reduce the number of experimental runs and material wastage. This study considers several parameters, including pouring temperature, pouring distance, and slanting angles for producing quality feedstock. Hence, multi-objective optimisation (MOO) techniques using computational approaches utilised alongside the caster while deciding to design are applied to help produce faster and more accurate output. The experiment was performed based on the full factorial design (FFD). Then, mathematical regression models were developed from the data obtained and implemented as an objective function equation in the MOO optimisation process. In this study, MOO named multi-objective Jaya (MOJaya) was improved in terms of hybrid MOJaya and inertia weight with archive K-Nearest Neighbor (MOiJaya-aKNN) algorithm. The proposed algorithm was improved in terms of the search process and archive selection to achieve a better feedstock performance through the CS. The study’s findings showed that the values of tensile and impact strengths from MOiJaya_aKNN are close to the experiment values. The results show that the hybrid MOJaya has improved the prediction of feedstock using optimal CS parameters.
- Open Access
- 29 November 2023
- Published by Akademia Baru Publishing in Malaysian Journal on Composites Science and Manufacturing
- Vol. 12 (1) , 73-83
Influence of Graphene on the Microstructure and Mechanical Properties of Aluminium Matrix Composite
The constraints of conventional aluminum alloys have prompted the investigation of strengthening substances such as carbon nanotubes and graphene fillers. The improved composite exhibits suitability for applications in the automotive and aviation industries. Graphene's popularity stems from its high strength, electrical and thermal conductivity, and chemical inertness, making it ideal for mechanical, thermal, and microstructural applications. This research varied concentrations of graphene nanoplatelets (0.3%, 0.6%, and 0.9%) to enhance the mechanical properties of aluminum metal matrix composites. A stir casting process was employed to create a graphene-reinforced aluminum matrix composite using A356 aluminum alloy. A designed experiment (DOE) investigated the impacts of graphene concentration and suitable heat treatment time on the aluminum composite. Subsequently, the specimens underwent heat treatment and X-ray diffraction (XRD). Mechanical properties were examined using a universal testing machine. The best aluminum matrix composites were produced with 0.9wt% graphene and 180 minutes of heat treatment. These parameters resulted in a microstructure with refined grains evolving from dendritic to rosette. The grains became closely packed, and reduced porosity was observed. As a result, the mechanical properties were enhanced, with a maximum ultimate tensile strength (UTS) of 250 MPa and a fracture elongation of 6%. The findings indicate that graphene nanoplatelet (GNP) concentration significantly influences the mechanical characteristics of the composite. Tensile and yield strength increase with GNP concentration, but higher concentrations reduce the composite's ductility. These insights contribute to optimizing GNP-reinforced composites and developing innovative materials with superior mechanical properties.
- 29 November 2023
- Published by Akademia Baru Publishing in Malaysian Journal on Composites Science and Manufacturing
- Vol. 12 (1) , 73-83
Open AccessInfluence of Graphene on the Microstructure and Mechanical Properties of Aluminium Matrix Composite
The constraints of conventional aluminum alloys have prompted the investigation of strengthening substances such as carbon nanotubes and graphene fillers. The improved composite exhibits suitability for applications in the automotive and aviation industries. Graphene's popularity stems from its high strength, electrical and thermal conductivity, and chemical inertness, making it ideal for mechanical, thermal, and microstructural applications. This research varied concentrations of graphene nanoplatelets (0.3%, 0.6%, and 0.9%) to enhance the mechanical properties of aluminum metal matrix composites. A stir casting process was employed to create a graphene-reinforced aluminum matrix composite using A356 aluminum alloy. A designed experiment (DOE) investigated the impacts of graphene concentration and suitable heat treatment time on the aluminum composite. Subsequently, the specimens underwent heat treatment and X-ray diffraction (XRD). Mechanical properties were examined using a universal testing machine. The best aluminum matrix composites were produced with 0.9wt% graphene and 180 minutes of heat treatment. These parameters resulted in a microstructure with refined grains evolving from dendritic to rosette. The grains became closely packed, and reduced porosity was observed. As a result, the mechanical properties were enhanced, with a maximum ultimate tensile strength (UTS) of 250 MPa and a fracture elongation of 6%. The findings indicate that graphene nanoplatelet (GNP) concentration significantly influences the mechanical characteristics of the composite. Tensile and yield strength increase with GNP concentration, but higher concentrations reduce the composite's ductility. These insights contribute to optimizing GNP-reinforced composites and developing innovative materials with superior mechanical properties.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1842, 030023
Optimization of permeability for quality improvement by using factorial design
Sand castings are used worldwide by the manufacturing process in Metal Casting Industry, whereby the green sand are the commonly used sand mould type in the industry of sand casting. The defects on the surface of casting product is one of the problems in the industry of sand casting. The problems that relates to the defect composition of green sand are such as blowholes, pinholes shrinkage and porosity. Our objective is to optimize the best composition of green sand in order to minimize the occurrence of defects. Sand specimen of difference parameters (Bentonite, Green Sand, Cold dust and water) were design and prepared to undergo permeability test. The 24 factorial design experiment with four factors at difference composition were runs, and the total of 16 runs experiment were conducted. The developed models based on the experimental design necessary models were obtained. The model with a high coefficient of determination (R2=0.9841) and model for predicted and actual fitted well with the experimental data. Using the Analysis of Design Expert software, we identified that bentonite and water are the main interaction effect in the experiments. The optimal settings for green sand composition are 100g silica sand, 21g bentonite, 6.5 g water and 6g coal dust. This composition gives an effect of permeability number 598.3GP.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1842, 030023
Optimization of permeability for quality improvement by using factorial design
Sand castings are used worldwide by the manufacturing process in Metal Casting Industry, whereby the green sand are the commonly used sand mould type in the industry of sand casting. The defects on the surface of casting product is one of the problems in the industry of sand casting. The problems that relates to the defect composition of green sand are such as blowholes, pinholes shrinkage and porosity. Our objective is to optimize the best composition of green sand in order to minimize the occurrence of defects. Sand specimen of difference parameters (Bentonite, Green Sand, Cold dust and water) were design and prepared to undergo permeability test. The 24 factorial design experiment with four factors at difference composition were runs, and the total of 16 runs experiment were conducted. The developed models based on the experimental design necessary models were obtained. The model with a high coefficient of determination (R2=0.9841) and model for predicted and actual fitted well with the experimental data. Using the Analysis of Design Expert software, we identified that bentonite and water are the main interaction effect in the experiments. The optimal settings for green sand composition are 100g silica sand, 21g bentonite, 6.5 g water and 6g coal dust. This composition gives an effect of permeability number 598.3GP.