ZGZehra Güner

Zehra Güner

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zehra Güner has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Prevalence, Clinical Distribution, and Severity of Molar Incisor Hypomineralisation in Gaziantep: A Cross-Sectional Study

    by Zübeyde Uçar Gündoğar, Derya Sarıoğlu, Zehra Güner

    Objective: Considering the growing clinical importance of molar incisor hypomineralisation (MIH), this study aimed to determine its prevalence, distribution, and severity in children aged 8–12 years in Gaziantep, Türkiye. Methods: This cross-sectional study included 1,067 children aged 8–12 years who presented to the Department of Pediatric Dentistry, Faculty of Dentistry, Gaziantep University in 2026. MIH was diagnosed and classified according to the European Academy of Pediatric Dentistry criteria. Clinical examinations were performed by two calibrated examiners. Demographic characteristics, lesion severity, tooth type, and arch distribution were recorded. Associations were analyzed using chi-square tests, and correlations were evaluated using Spearman’s rank correlation test (p < 0.05). Results: The prevalence of MIH was 27.6% (n = 295). No significant differences were observed by gender or age. Of 1,906 MIH-affected teeth, 60.0% were first permanent molars and 40.0% were incisors. Severe lesions were more frequent in molars (54.2%), whereas incisors were predominantly mild (87.3%) (p < 0.001). The lower-left first permanent molar was the most frequently affected tooth, and maxillary central incisors showed a clear predominance. A weak but significant correlation was found between the number of affected molars and incisors (rs = 0.127, p = 0.029). Incisor involvement increased significantly with increasing molar severity (p = 0.005), and a moderate positive correlation was observed between molar and incisor severity scores (rs=0.338, p < 0.001). Conclusion: MIH appears to be a common and clinically relevant condition in this population. The predominance of severe lesions in molars and their association with incisor involvement highlight the need for early detection and targeted preventive strategies in pediatric dental practice.

  • Open Access

    Can thermal cycling and iron supplement exposure alter the esthetic performance of bioactive dental materials?

    by Gökçe Keçeci, Zehra Güner, Simge Gümüş Ayaz, Ayşenur Güngör Borsöken

    The aim of this study was to evaluate the color stability of contemporary bioactive restorative materials, including Equia Forte HT, GC Fuji II LC, ACTIVA BioACTIVE, Cention N, and a conventional composite resin, and to comparatively analyze their color changes following thermal aging and exposure to iron preparations. A total of 120 specimens were fabricated from five different restorative materials: Equia Forte, Cention N, ACTIVA BioACTIVE, Fuji II, and SolareX ( n = 24 per group). All samples were initially subjected to thermal cycling, followed by immersion in two iron-containing solutions (Ferrum and Ocean) and one control solution (distilled water) for 72 h. Measurements were recorded at baseline (after 24 h of immersion in distilled water), after thermal cycling, and following staining procedures. Color difference (ΔE00) and lightness ( L *) values were quantitatively assessed using a dental spectrophotometer based on the CIEDE2000 color evaluation system. Statistical analyses were performed using the Shapiro–Wilk test, Kruskal–Wallis test, and generalized linear models (GLM) approach. All analyses were conducted with SPSS version 22.0, with a significance level set at p < 0.05. A statistically significant difference was observed between the baseline and post-aging color values ( p < 0.05). Among the materials tested, Equia Forte exhibited the greatest degree of color change, while ACTIVA BioACTIVE and SolareX demonstrated similar and comparatively lower levels of discoloration. Although no statistically significant difference was found between ACTIVA BioACTIVE and SolareX regarding total color change from baseline to final measurements ( p > 0.05), the ΔE2 values of Equia Forte, Cention N, and Fuji II were significantly higher than those of the SolareX group ( p < 0.05). Furthermore, significant differences were noted in the L * values before and after aging depending on the restorative material used ( p < 0.05). Equia Forte showed the lowest L * values at both baseline (L1) and post-aging (L2), whereas ACTIVA BioACTIVE and SolareX presented the highest values. The findings of this in vitro study suggest that the color stability of restorative materials is influenced by intrinsic material properties as well as exposure to thermal aging and staining solutions. These factors should be considered when selecting restorative materials, particularly in esthetically demanding clinical situations.


  • Open Access

    Color Stability Under Challenge: Effects of Thermo-Aging and Mouthrinse Exposure on Anterior Teeth and Esthetic Composites

    by Gökçe Keçeci, Zehra Güner, Süleyman Ziya Şenyurt, Kamile Erciyas

    Objective: The aim of this study is to comparatively evaluate how the color stability of different esthetic composite resins and natural anterior teeth is affected after exposure to thermal aging and various mouthrinse solutions. Materials and Methods: A total of 96 extracted permanent anterior teeth were prepared with Class V cavities on the buccal surfaces and restored using three different esthetic composite resins: G-aenial Anterior (GC Corp., Tokyo, Japan), SOLARE X (GC Corp., Tokyo, Japan), and Estelite Sigma Quick (Tokuyama Dental Corp., Tokyo, Japan). The palatal surfaces of the same teeth were used as a natural enamel reference. Following restoration, all specimens underwent thermal aging for 10,000 cycles between 5 °C and 55 °C. Subsequently, the samples were immersed for 24 hours in four different mouthrinse solutions: 0.12% chlorhexidine solution (Kloroben, Drogsan, Türkiye), an antiseptic and anticavity formulation (Listerine Total Care, Johnson & Johnson, USA), a zinc-containing mouthrinse (Listerine Total Care Stay White, Johnson & Johnson, UK), and distilled water (control group). Color measurements were performed using a VITA Easyshade Advance 4.0 spectrophotometer, and color differences were calculated according to the CIEDE2000 (ΔE₀₀) formula. Results: Color changes were observed in all composite materials after thermal aging and exposure to mouth-rinse solutions. Specimens exposed to chlorhexidine-containing solutions exhibited significantly greater discoloration compared with the control group (p < 0.050). Statistically significant differences in color stability were also found among the materials (p < 0.050). Conclusion: Within the limitations of this in vitro study, chlorhexidine-containing mouthrinse caused the highest color change, while material type significantly influenced color stability.


  • Open Access

    Prevalence of dental number anomalies in 4140 cases: retrospective cross-sectional study conducted in Gaziantep

    by Zehra Güner, Büşra Yücetürk, Saadet Nilsu Muttepe, Zübeyde Uçar Gündoğar

    Aims: Dental number anomalies (hypodontia and hyperdontia) are among the most common developmental disorders encountered during the tooth development process in humans. It is known that specific teeth or regions are more frequently affected in different ethnic groups. The aim of this study was to determine the prevalence of congenital dental number anomalies including both missing and supernumerary teeth-excluding third molars, in children living in the province of Gaziantep University. Methods: This study examined the panoramic radiographs of 4140 children aged 8 to 15 who were admitted to the Department of Pediatric Dentistry at Gaziantep University Faculty of Dentistry. Patients with tooth extraction, cleft lip and palate, and systemic diseases were excluded from the study. The cases were investigated regarding gender, age, number, and location of missing teeth. Results: The prevalence of hypodontia was 5.58%, with a total of 414 congenitally missing teeth detected. No statistically significant differences were found across age groups or between sexes (p>0.05). The most frequently missing tooth was the mandibular second premolar, followed by teeth 45, 25, 15, and 22. One or two missing teeth were the most common findings among patients. The mandible exhibited a greater number of missing teeth compared with the maxilla.Hyperdontia was observed in 1.67% of the patients, with a total of 77 supernumerary teeth identified. A statistically significant sex related difference was found (p

  • Open Access

    Thermal Aging-Induced Alterations in Surface and Interface Topography of Bio-Interactive Dental Restorative Materials Assessed by 3D Non-Contact Profilometry

    by Zehra Güner, Gökçe Keçeci, Sadık Olguner, Hakan Çandar, Ayşenur Güngör Borsöken, Lezize Sebnem Turkun

    This study aimed to evaluate the effects of thermal cycling and restorative material type on surface roughness of material surfaces and dental interfaces using a non-contact profilometer. Ninety Class V cavities (2 mm × 4 mm × 2 mm in height, width, and depth) were prepared on extracted third molars and restored with four bio-interactive materials (Equia Forte, Cention-N, Activa BioActive Restorative, Fuji II LC) and one composite resin (Solare-X) (n = 18/group). After polishing (Optidisc), initial surface roughness (Sa, µm) was measured following 24 h immersion in distilled water. Measurements were performed at cement/material (400 × 1600 μm2), enamel/material (1600 × 400 μm2), and material surfaces (800 × 800 μm2). Samples underwent 10,000 thermal cycles (5–55 °C) to simulate aging, and roughness was re-measured. Data were analyzed with two-way repeated measures ANOVA and Tukey’s post hoc test (p < 0.05). Solare-X showed the lowest roughness, while Fuji II LC and Activa BioActive Restorative were smoother than Cention-N and Equia Forte (p < 0.01). All materials exhibited significant roughness increases after thermal cycling (p < 0.01). Cement/material and enamel/material interfaces consistently showed higher roughness than material surfaces (p < 0.01). Thermal cycling significantly increased surface roughness of all tested materials. Interfaces demonstrated greater roughness than material surfaces, indicating higher susceptibility to plaque retention and potential risk for long-term restoration success.

  • Open Access

    Parental Influence on Oral Health in School-Age Children: Behavioral Reflections and Impact on Daily Functioning

    by Zehra Güner, Semsettin Yildiz, Zübeyde Uçar Gündoğar, Derya Sarıoğlu

    Background: Oral and dental status is an important health indicator that affects an individual’s physiological, psychological, and social quality of life. In this context, childhood is a critical period in which children acquire oral hygiene habits and in which parents play a key role. The aim of this study is to evaluate comparatively the knowledge, attitudes, and behaviors of school-age children and their parents regarding oral and dental health, and to reveal parental influence on children’s oral health. Methods: We conducted the study with 230 children aged 7–15 years and their parents (n = 230) who presented at the Department of Pedodontics in the Faculty of Dentistry, Fırat University, in Elazığ, Türkiye, between December 2023 and March 2024. We administered a structured questionnaire to the participants consisting of 12 questions that covered oral hygiene habits and sociodemographic characteristics. We analyzed the data with IBM SPSS Statistics version 26.0 software (IBM Corp., Armonk, NY, USA) and used chi-square and McNemar’s tests in intergroup comparisons (p < 0.05). Results: We observed similarities between children and parents regarding toothbrushing time, brushing technique, use of fluoride toothpaste, and opinions on fluoride’s harmfulness. We determined that both groups tend to go to the dentist only in case of complaints. In contrast, we found significant differences in favor of parents in terms of frequency and duration of toothbrushing, junk food consumption, and use of oral care products (p < 0.05). Conclusions: This study shows that parents play an essential role in influencing children’s oral and dental health behaviors. However, parental similarity alone is not sufficient for the development of correct and sustainable oral hygiene habits. Therefore, awareness studies that will increase the awareness levels of both children and parents and the dissemination of family-focused preventive health programs are of great importance.

  • Deep learning approach for tooth numbering and restoration detection on pediatric periapical radiographs in mixed dentition

    by Büşra Yücetürk, Zehra Güner

    Objectives Accurate tooth numbering and restoration detection on periapical radiographs in mixed dentition are critical to the treatment planning process. They also improve the speed and accuracy of treatment processes by automating the early diagnosis process. This study aims to evaluate the numbering of teeth on periapical radiographs taken during the mixed dentition period and the detection efficiency of dental restorations using the YOLOv8 model. Materials and methods This study included 1,504 periapical radiographs to number primary And permanent teeth taken for diagnostic purposes for patients between the ages of 6 And 12 And 1,599 periapical radiographs to evaluate the automatic detection efficiency of restorations. Python programming language and YOLOv8 model were used. Model performance success, IoU (Intersection over Union) confusion matrix, accuracy, precision, F1-score, and recall values ​​were used to evaluate the performance of the models. Results Recall, precision, F1-score, and accuracy values ​​calculated using the confusion matrix for numbering teeth were determined as 0.915, 0.979, 0.946, And 0.89, respectively. Recall, precision, F1-score, and accuracy values ​​for the detection of restorations were calculated as 0.954, 0.871, 0.911, And 0.83, respectively. Conclusion YOLOv8-based deep learning models offer a promising model for accurate numbering of primary and permanent teeth and detection of restorations in periapical radiographs of pediatric patients with mixed dentition, leading to future studies with high accuracy rates. Clinical relevance Automating the process of identifying and numbering teeth in dental radiographs, the first stage of clinical evaluation in dentistry, with artificial intelligence-based algorithms saves physicians significant time and labor in diagnosis and treatment planning, increasing the efficiency and accuracy of clinical practices.


  • Evaluation of nanohardness, elastic modulus, and surface roughness of fluoride-releasing tooth colored restorative materials

    by Zehra Güner, Hazal Deniz Köse

    Journal of Clinical Pediatric Dentistry (JOCPD) is an international, peer-reviewed, open access journal, which is currently indexed in SCIE, etc., aming to provide clinically relevant information to enable the practicing dentist to have access to the state of the art in pediatric dentistry.