Abiodun Joseph Kilani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Abiodun Joseph Kilani has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Bolanle Deborah Ikotun
Department of Civil and Environmental Engineering and Building Science, College of Science, Engineering and Technology, University of South Africa, Johannesburg, South Africa
6 shared publications - Rasheed Abdulwahab
Department of Civil & Environmental Engineering and Building Science, College of Science, Engineering and Technology, University of South Africa, Florida Science Campus, Roodepoort, South Africa
5 shared publications - Ademilade Olubambi
University of Johannesburg
2 shared publications Christopher Fapohunda
2 shared publications- Oluwatobi Adeleke
Mechanical Engineering Sciences, University of Johannesburg, Johannesburg, South Africa
2 shared publications - Akinniyi Akinjide Adelani
Federal University of Technology
1 shared publication
Latest Publications
- Open Access
- 13 February 2026
- Published by Springer Nature in Discover Materials
- Vol. 6 (1)
Regression analysis and optimization of compressive and tensile strengths of concrete incorporated with sodium hydroxide treated rubber crumb and steel wire using statistical method and 3D graphing calculator model
- 13 February 2026
- Published by Springer Nature in Discover Materials
- Vol. 6 (1)
Open AccessRegression analysis and optimization of compressive and tensile strengths of concrete incorporated with sodium hydroxide treated rubber crumb and steel wire using statistical method and 3D graphing calculator model
- Open Access
- 3 February 2026
- Published by Elsevier in Chemistry of Inorganic Materials
- Vol. 8
Modelling of structural performance and sustainability of concrete produced with different water – Cement ratio and superplasticizer using multi-linear regression model
- 3 February 2026
- Published by Elsevier in Chemistry of Inorganic Materials
- Vol. 8
Open AccessModelling of structural performance and sustainability of concrete produced with different water – Cement ratio and superplasticizer using multi-linear regression model
- Open Access
- 30 January 2026
- Published by Springer Nature in Discover Applied Sciences
- Vol. 8 (2)
A holistic review on the structural performance of concrete incorporating palm kernell and coconut shells: an approach to waste management and production of sustainable green composite
- 30 January 2026
- Published by Springer Nature in Discover Applied Sciences
- Vol. 8 (2)
Open AccessA holistic review on the structural performance of concrete incorporating palm kernell and coconut shells: an approach to waste management and production of sustainable green composite
- Open Access
- 1 September 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (9) , 1-36
A review on the structural performance of sustainable composite construction materials incorporating locust bean and mango wastes
The huge emission of carbon dioxide (CO2) and other greenhouse gases (GHGs) from cement industries yearly contribute to the high rate of global warming. Also, the wrong disposal of agricultural residues such as locust bean and mango waste (MW and LBW) has resulted in tremendous environmental problems such as air pollution and compromising available land for useful purposes. This study presents the reinforcing potential of LBW and MW in concrete through the review of previous research. The review shows that LBW and MW are rich in pozzolans up to 77.31 and 78.815%. The incorporation of 30% pod ash (PA) obtained from LBW in concrete accelerates the final and initial setting times of the concrete by 39.7 and 66.8% while 50% of Mango Seed Ash (MSA) increased the concrete’s water absorption by 11.1%. In addition, 0–25% of LBW and MW is good for the production of light—normal weight concrete with density range value of 1596–2567.41 kg/m3. Furthermore, the concrete’s compressive strengths drastically reduced by 10–84% and 2.17–13.04% at incorporation of 5–50% of LBW ash and 2–8% of mango leave ash (MLA) respectively. Also, the incorporation of 10% of LBPA and 2–8% of MLA reduced the concrete’s flexural strengths by 4.6% and 4.31–14.061% respectively. The incorporation of 6% MLA and 10% LBPA increased the tensile strength of mortar by 9.36 and 2.79%, respectively. In another context, blending eggshells with LBPA and incorporation of Mango seed fibre (MSF) increased the flexural strength of LBPA and modulus of elasticity of MSF in concrete and composite by 4.68 and 36% respectively. Therefore, it can be concluded that LBW and MW poorly reinforced the structural properties of concrete. It is recommended to blend the two wastes with other pozzolan—rich materials such as eggshell to improve their performance in concrete. This is required for future research and industrial practice.
- 1 September 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (9) , 1-36
Open AccessA review on the structural performance of sustainable composite construction materials incorporating locust bean and mango wastes
The huge emission of carbon dioxide (CO2) and other greenhouse gases (GHGs) from cement industries yearly contribute to the high rate of global warming. Also, the wrong disposal of agricultural residues such as locust bean and mango waste (MW and LBW) has resulted in tremendous environmental problems such as air pollution and compromising available land for useful purposes. This study presents the reinforcing potential of LBW and MW in concrete through the review of previous research. The review shows that LBW and MW are rich in pozzolans up to 77.31 and 78.815%. The incorporation of 30% pod ash (PA) obtained from LBW in concrete accelerates the final and initial setting times of the concrete by 39.7 and 66.8% while 50% of Mango Seed Ash (MSA) increased the concrete’s water absorption by 11.1%. In addition, 0–25% of LBW and MW is good for the production of light—normal weight concrete with density range value of 1596–2567.41 kg/m3. Furthermore, the concrete’s compressive strengths drastically reduced by 10–84% and 2.17–13.04% at incorporation of 5–50% of LBW ash and 2–8% of mango leave ash (MLA) respectively. Also, the incorporation of 10% of LBPA and 2–8% of MLA reduced the concrete’s flexural strengths by 4.6% and 4.31–14.061% respectively. The incorporation of 6% MLA and 10% LBPA increased the tensile strength of mortar by 9.36 and 2.79%, respectively. In another context, blending eggshells with LBPA and incorporation of Mango seed fibre (MSF) increased the flexural strength of LBPA and modulus of elasticity of MSF in concrete and composite by 4.68 and 36% respectively. Therefore, it can be concluded that LBW and MW poorly reinforced the structural properties of concrete. It is recommended to blend the two wastes with other pozzolan—rich materials such as eggshell to improve their performance in concrete. This is required for future research and industrial practice.
- Open Access
- 10 March 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 49 (6) , 5497-5521
Production of Sustainable Mortar with Sodium Hydroxide Treated Rubber Crumb
Mortar is one of the essential construction materials required for the construction of infrastructures, most importantly, as connectors in walling units. The incorporation of Rubber Crumbs (RCs) into mortar is one of the best methods of controlling environmental pollution and improving the quality of construction material. This study evaluates the performance of sodium hydroxide (NaOH) treated Rubber Crumb (RC) on mortar’s structural properties. In the experiment, the physical and chemical characterizations of the materials such as sand, RCs and cement were determined in accordance with SANS 3001-AG1 and SANS 3001-AG20 respectively. The consistency and setting times of mortar were determined according to SANS 50196 – 3: 2006 and EN 196 – 3: 2005. Also, the densities, water absorption, modulus of elasticity, and flexural and compressive strengths of mortar were evaluated according to SANS 50196-1, ASTM C 1437 and SANS 50196-3 standard using 40 × 40 × 160 mm mortar prisms. The morphological natures of the RC were evaluated through SEM and EDS techniques. The experimental results showed that 1.5% RC increased mortar’s compressive and flexural strengths by 9.13% and 5.89%, respectively. The density, modulus of elasticity, variation in modulus of elasticity, and water absorption of mortar reduced by 3.8, 10, 0.2 and 0.27% at the application of 1.5, 1.5, 1.5, and 3.5% of RC respectively. This reduction indicated good properties of RC- mortar for construction purposes. The SEM and EDS micrographs of RC treated with NaOH developed less dense pores leading to the production of better strength mortar. In conclusion, mortar with 1.5% NaOH treated RC is good for construction purposes, most importantly, in building blocks interface and rendering of walls.
- 10 March 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 49 (6) , 5497-5521
Open AccessProduction of Sustainable Mortar with Sodium Hydroxide Treated Rubber Crumb
Mortar is one of the essential construction materials required for the construction of infrastructures, most importantly, as connectors in walling units. The incorporation of Rubber Crumbs (RCs) into mortar is one of the best methods of controlling environmental pollution and improving the quality of construction material. This study evaluates the performance of sodium hydroxide (NaOH) treated Rubber Crumb (RC) on mortar’s structural properties. In the experiment, the physical and chemical characterizations of the materials such as sand, RCs and cement were determined in accordance with SANS 3001-AG1 and SANS 3001-AG20 respectively. The consistency and setting times of mortar were determined according to SANS 50196 – 3: 2006 and EN 196 – 3: 2005. Also, the densities, water absorption, modulus of elasticity, and flexural and compressive strengths of mortar were evaluated according to SANS 50196-1, ASTM C 1437 and SANS 50196-3 standard using 40 × 40 × 160 mm mortar prisms. The morphological natures of the RC were evaluated through SEM and EDS techniques. The experimental results showed that 1.5% RC increased mortar’s compressive and flexural strengths by 9.13% and 5.89%, respectively. The density, modulus of elasticity, variation in modulus of elasticity, and water absorption of mortar reduced by 3.8, 10, 0.2 and 0.27% at the application of 1.5, 1.5, 1.5, and 3.5% of RC respectively. This reduction indicated good properties of RC- mortar for construction purposes. The SEM and EDS micrographs of RC treated with NaOH developed less dense pores leading to the production of better strength mortar. In conclusion, mortar with 1.5% NaOH treated RC is good for construction purposes, most importantly, in building blocks interface and rendering of walls.
- Open Access
- 17 October 2024
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- p. 1-31
Effect of Crumb Rubber on Concrete’s and Mortar’s Structural Properties: A Review
Crumb rubber (CR) is a construction material obtained from slicing of scrap tyres. As reviewed, the inclusion of CR in concrete showed the reductions in concrete’s fresh and hardened properties even on its durability. This paper reports that CR-concrete is poor in workability, more porous, poor in resisting chlorine ion, inconsistency in strength and normally takes long time to set. Also, the review of previous results on CR-concrete proved that, CR-concrete’s ductile strength increased by 86.2% while its compressive, tensile and flexural strengths, and modulus of elasticity reduced by 50.3%, 24.51%, 31.94% and 23.51% respectively. The reduction in strength was tagged to the application of high percentages of CR in concrete (0–40%) and the use of high water–cement ratio (w/c) for the concrete production (≥ 4.0). Likewise, the microstructural results also support the strengths reduction trend. As reviewed, the inclusion of treated crumb rubbers in concrete improved its microstructural properties. Therefore, it is advisable to make use of the treated CR, 0–5% of CR and 0.4 water–cement ratio for the production of CR-concrete and mortar for better results. This data is available for future researchers to make further investigations on improving the weak reinforcing properties of Crumb Rubber in structural concrete and mortar.
- 17 October 2024
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- p. 1-31
Open AccessEffect of Crumb Rubber on Concrete’s and Mortar’s Structural Properties: A Review
Crumb rubber (CR) is a construction material obtained from slicing of scrap tyres. As reviewed, the inclusion of CR in concrete showed the reductions in concrete’s fresh and hardened properties even on its durability. This paper reports that CR-concrete is poor in workability, more porous, poor in resisting chlorine ion, inconsistency in strength and normally takes long time to set. Also, the review of previous results on CR-concrete proved that, CR-concrete’s ductile strength increased by 86.2% while its compressive, tensile and flexural strengths, and modulus of elasticity reduced by 50.3%, 24.51%, 31.94% and 23.51% respectively. The reduction in strength was tagged to the application of high percentages of CR in concrete (0–40%) and the use of high water–cement ratio (w/c) for the concrete production (≥ 4.0). Likewise, the microstructural results also support the strengths reduction trend. As reviewed, the inclusion of treated crumb rubbers in concrete improved its microstructural properties. Therefore, it is advisable to make use of the treated CR, 0–5% of CR and 0.4 water–cement ratio for the production of CR-concrete and mortar for better results. This data is available for future researchers to make further investigations on improving the weak reinforcing properties of Crumb Rubber in structural concrete and mortar.
- Open Access
- 24 June 2024
- Published by Yildiz Technical University - DIGITAL COMMONS JOURNALS in Journal of Sustainable Construction Materials and Technologies
- Vol. 9 (2) , 177-198
Analyzing an efficient mix design for the production of quality asphalt concrete: A means of reducing roads’ maintenance cost
Poor road design is the bedrock for strength deformation and formation of potholes in road pavement systems. The best choice of aggregates for asphalt concrete production contributes significantly to road pavement stability, sustainability, and durability at its serviceability life- style. The use of critical design and analysis techniques for the production of asphalt concrete is one of the standard means of eradicating the defect of roads’ pavement deformation in the global construction industries. This study reveals the hidden knowledge about the standard formulation and mix design required for producing durable asphaltic concrete pavements. In the experiment, three different mix designs were used to make quality asphalt concrete for the road’s binder pavement construction. This was done to ascertain the best quality ag- gregates required to produce durable asphalt concrete to construct binder road’s pavement. Also, the aggregates used for the production of quality asphalt concrete for the construction of road’s wearing course pavements were formulated using two mix designs. The results of the experiments proved that the asphalt concrete made with the aggregate formulated for the binder course from the first mix design yielded the best outcome, which is suggested for the global production of quality and standard asphalt concrete for road’ binder pavements’ con- struction. Although the formulated aggregates for the wearing course’s asphalt production were made from the two mix designs, however, the obtained results from the first mix design were satisfactory fell within the specified limits. This made it the best mix design for indus- trial practice. In addition, the accuracy and efficiency of the results obtained relied so much on the standard of estimation made to produce quality asphalt concrete, which cost up to $270,830.00 at Chainages 26 + 700 to 26 + 925. All the experimental results proved that ap- plication of standard aggregates’ mix design in road pavement construction helps in prevent- ing the problems of deformation, cracks, and other defects on the roads’ pavement system. Also, applying the first formulated mix design used in this study will help in maintaining the sustainable, durable, stable, and flexible road pavement in the global communities. Likewise, the government's constant expenditure on road pavement maintenance will be reduced.
- 24 June 2024
- Published by Yildiz Technical University - DIGITAL COMMONS JOURNALS in Journal of Sustainable Construction Materials and Technologies
- Vol. 9 (2) , 177-198
Open AccessAnalyzing an efficient mix design for the production of quality asphalt concrete: A means of reducing roads’ maintenance cost
Poor road design is the bedrock for strength deformation and formation of potholes in road pavement systems. The best choice of aggregates for asphalt concrete production contributes significantly to road pavement stability, sustainability, and durability at its serviceability life- style. The use of critical design and analysis techniques for the production of asphalt concrete is one of the standard means of eradicating the defect of roads’ pavement deformation in the global construction industries. This study reveals the hidden knowledge about the standard formulation and mix design required for producing durable asphaltic concrete pavements. In the experiment, three different mix designs were used to make quality asphalt concrete for the road’s binder pavement construction. This was done to ascertain the best quality ag- gregates required to produce durable asphalt concrete to construct binder road’s pavement. Also, the aggregates used for the production of quality asphalt concrete for the construction of road’s wearing course pavements were formulated using two mix designs. The results of the experiments proved that the asphalt concrete made with the aggregate formulated for the binder course from the first mix design yielded the best outcome, which is suggested for the global production of quality and standard asphalt concrete for road’ binder pavements’ con- struction. Although the formulated aggregates for the wearing course’s asphalt production were made from the two mix designs, however, the obtained results from the first mix design were satisfactory fell within the specified limits. This made it the best mix design for indus- trial practice. In addition, the accuracy and efficiency of the results obtained relied so much on the standard of estimation made to produce quality asphalt concrete, which cost up to $270,830.00 at Chainages 26 + 700 to 26 + 925. All the experimental results proved that ap- plication of standard aggregates’ mix design in road pavement construction helps in prevent- ing the problems of deformation, cracks, and other defects on the roads’ pavement system. Also, applying the first formulated mix design used in this study will help in maintaining the sustainable, durable, stable, and flexible road pavement in the global communities. Likewise, the government's constant expenditure on road pavement maintenance will be reduced.
- Open Access
- 23 January 2023
- Published by EJSE International in Electronic Journal of Structural Engineering
- Vol. 23 (1) , 36-45
Comparative Examinations of Structural Responses of Concrete Reinforced with Treated Oil Palm Empty Fruit Bunch (TOPEFB) and Untreated Oil Palm Empty Fruit Bunch (OPEFB) Fibres
The findings from the investigation conducted, to compare the structural performance of concrete containing treated (TOPEFB) and untreated Empty Oil Palm Fruit Bunch (OPEFB) fibres are presented in this paper. For the TOPEFB fibres, the dried fibres were treated with 0.2% NAOH solution following the procedures of appropriate authority. The structural parameters investigated were consistencies, setting times, densities, compressive and tensile strengths of concrete incorporating TOPEFB and OPEFB fibres in the mix. The addition of fibres was limited to 1.20% by weight of cement in the concrete. The interval of addition was 0.2%. The results showed that (i) the setting times of mortars containing TOPEFB fibres were higher than that of mortars with OPEFB fibres, (ii) concrete specimens containing TOPEFB fibres are more workable that concrete specimens with OPEFB fibres, (iii) densities of concrete specimens containing OPEFB fibres were in the range for normal concrete applications while the densities for specimens with TOPEFB developed densities that fell in the heavy weight concrete classification, (iv) concrete specimens containing TOPEFB fibres developed higher compressive strengths than specimens with OPEFB fibres and (v) tensile strengths of concrete specimens containing TOPEFB fibres were higher than specimens with OPEFB fibres by at least 59.04%. The overall conclusion from the findings of this study is that concrete specimens containing TOPEFB fibres have superior structural properties than specimens with OPEFB fibres
- 23 January 2023
- Published by EJSE International in Electronic Journal of Structural Engineering
- Vol. 23 (1) , 36-45
Open AccessComparative Examinations of Structural Responses of Concrete Reinforced with Treated Oil Palm Empty Fruit Bunch (TOPEFB) and Untreated Oil Palm Empty Fruit Bunch (OPEFB) Fibres
The findings from the investigation conducted, to compare the structural performance of concrete containing treated (TOPEFB) and untreated Empty Oil Palm Fruit Bunch (OPEFB) fibres are presented in this paper. For the TOPEFB fibres, the dried fibres were treated with 0.2% NAOH solution following the procedures of appropriate authority. The structural parameters investigated were consistencies, setting times, densities, compressive and tensile strengths of concrete incorporating TOPEFB and OPEFB fibres in the mix. The addition of fibres was limited to 1.20% by weight of cement in the concrete. The interval of addition was 0.2%. The results showed that (i) the setting times of mortars containing TOPEFB fibres were higher than that of mortars with OPEFB fibres, (ii) concrete specimens containing TOPEFB fibres are more workable that concrete specimens with OPEFB fibres, (iii) densities of concrete specimens containing OPEFB fibres were in the range for normal concrete applications while the densities for specimens with TOPEFB developed densities that fell in the heavy weight concrete classification, (iv) concrete specimens containing TOPEFB fibres developed higher compressive strengths than specimens with OPEFB fibres and (v) tensile strengths of concrete specimens containing TOPEFB fibres were higher than specimens with OPEFB fibres by at least 59.04%. The overall conclusion from the findings of this study is that concrete specimens containing TOPEFB fibres have superior structural properties than specimens with OPEFB fibres
- 9 February 2022
- Published by Springer Nature in Asian Journal of Civil Engineering
- Vol. 23 (2) , 299-320
Application of machine learning models to investigate the performance of concrete reinforced with oil palm empty fruit brunch (OPEFB) fibers
- 9 February 2022
- Published by Springer Nature in Asian Journal of Civil Engineering
- Vol. 23 (2) , 299-320
Application of machine learning models to investigate the performance of concrete reinforced with oil palm empty fruit brunch (OPEFB) fibers