WJWan Jiang

Wan Jiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wan Jiang has a total of 310 co-authors. Here are the top co-authors by number of shared publications:

  • Lianjun Wang

    State Key Laboratory of Advanced Fiber Materials College of Materials Science and Engineering Engineering Research Center of Advanced Glass Manufacturing Technology Ministry of Education Donghua University Shanghai China

    58 shared publications
  • Qihao Zhang

    State Key Laboratory of Advanced Fiber Materials College of Materials Science and Engineering Donghua University Shanghai China

    9 shared publications
  • Yunluo Wang

    State Key Laboratory of Advanced Fiber Materials College of Materials Science and Engineering Donghua University Shanghai P. R. China

    9 shared publications
  • Minghui Wang

    Research Center for Analysis and Measurement Donghua University Shanghai P. R. China

    8 shared publications
  • Yuchi Fan

    State Key Laboratory of Advanced Fiber Materials College of Materials Science and Engineering Donghua University Shanghai China

    8 shared publications
  • Beiying Zhou

    State Key Laboratory of Advanced Fiber Materials College of Materials Science and Engineering Donghua University Shanghai P. R. China

    7 shared publications

Latest Publications

  • Cold Sintering Enables Incorporation of ZIF‐8 into PbTe Composites for Mid‐Temperature Thermoelectric Energy Conversion

    by Jihu Chen, Zhi Cheng, Yunfeng Hu, Chao Zhao, Xu Wang, Jie Min, Mingming Si, Qi Ding, Yuchi Fan, Wan Jiang

    Metal–organic frameworks (MOFs) are promising candidates for constructing thermoelectric composites with low lattice thermal conductivity, thanks to their inherent porous structure and controllable particle size. However, their inferior thermal stability confines MOFs to low‐temperature sintered thermoelectric systems. In this work, ZIF‐8 nanoparticles were incorporated into n‐type mid‐temperature PbTe 0.99 I 0.01 via cold sintering (CSP). Relative to spark plasma sintering, low‐temperature CSP well preserves the porous structure of ZIF‐8, while inducing fine grains, nanoscale Pb precipitates and dense dislocations. These multiscale defects strongly scatter mid‐ and low‐frequency phonons, reducing lattice thermal conductivity to 0.67 W·m − 1 ·K − 1 at 650 K. As an electron acceptor, ZIF‐8 also drives interfacial charge transfer and band bending to filter low‐energy carriers, elevating the Seebeck coefficient and thermoelectric quality factor. The composite delivers a peak zT of 1.40 and an average zT of 1.01 at 650 K. The assembled thermoelectric module achieves a high conversion efficiency of 6.5% under a 427 K temperature gradient. This study broadens the application of MOFs to high‐efficiency mid‐temperature thermoelectric energy conversion.

  • Open Access

    Ionic thermoelectric fibers woven into fabrics for human body heat harvesting

    by Menghan Shang, Weijia Fu, Tingting Sun, Huiru Zhao, Lianjun Wang, Wan Jiang


  • Structural Softness–Rigidity Mediation Enables Multicolor Emission and Long‐Lived Phosphorescence in Hf/Zr Halides

    by Yan Yang, Yunluo Wang, Shiyu Fang, Zesen Gao, Fei Qin, Jingshan Hou, Qinhua Wei, Futing Sun, Jiaxin Hu, Jixuan Liu, et al.

    Multicolor fluorescence, typically favored by soft environments, and phosphorescence, which relies on rigid lattices to stabilize triplet excitons, are fundamentally incompatible and hard to coexist within a single material. Here, we report a crown–ether–directed lattice assembly that integrates [HfCl 6 ] 2‒ /[ZrCl 6 ] 2‒ octahedra and DB18C6@M(K + /Rb + ) supramolecular, yielding four unknown organic–inorganic hybrid Hf/Zr halides. Notably, (DB18C6@K) 2 (CH 3 CN) 2 HfCl 6 achieves an exceptional room‐temperature phosphorescence (RTP) quantum yield (Φ p ) of 54.43%, a long lifetime of 0.8 s, and a visually discernible afterglow persisting up to 6 s. Moreover, these materials exhibit excitation–dependent multicolor emission, producing green and blue–white outputs under 302 and 365 nm irradiation, respectively. This unique multimodal luminescence originates from the synergistic interplay between the balanced soft‐rigid lattice provided by the crown‐ether framework and heavy – atom Hf/Zr centers, which facilitates intersystem crossing, enabling both efficient RTP and tunable multichannel pathways. It has been confirmed by the high–pressure synchrotron angle–dispersive x–ray diffraction and Raman results. Overall, this work establishes a heavy–atom–based structural mediation which may offer a generalizable route to high‐efficiency, multichannel, and stimuli‐responsive RTP materials.

  • Structural Softness–Rigidity Mediation Enables Multicolor Emission and Long‐Lived Phosphorescence in Hf/Zr Halides

    by Yan Yang, Yunluo Wang, Shiyu Fang, Zesen Gao, Fei Qin, Jingshan Hou, Qinhua Wei, Futing Sun, Jiaxin Hu, Jixuan Liu, et al.

    Multicolor fluorescence, typically favored by soft environments, and phosphorescence, which relies on rigid lattices to stabilize triplet excitons, are fundamentally incompatible and hard to coexist within a single material. Here, we report a crown–ether–directed lattice assembly that integrates [HfCl 6 ] 2‒ /[ZrCl 6 ] 2‒ octahedra and DB18C6@M(K + /Rb + ) supramolecular, yielding four unknown organic–inorganic hybrid Hf/Zr halides. Notably, (DB18C6@K) 2 (CH 3 CN) 2 HfCl 6 achieves an exceptional room‐temperature phosphorescence (RTP) quantum yield (Φ p ) of 54.43%, a long lifetime of 0.8 s, and a visually discernible afterglow persisting up to 6 s. Moreover, these materials exhibit excitation–dependent multicolor emission, producing green and blue–white outputs under 302 and 365 nm irradiation, respectively. This unique multimodal luminescence originates from the synergistic interplay between the balanced soft‐rigid lattice provided by the crown‐ether framework and heavy – atom Hf/Zr centers, which facilitates intersystem crossing, enabling both efficient RTP and tunable multichannel pathways. It has been confirmed by the high–pressure synchrotron angle–dispersive x–ray diffraction and Raman results. Overall, this work establishes a heavy–atom–based structural mediation which may offer a generalizable route to high‐efficiency, multichannel, and stimuli‐responsive RTP materials.

  • Open Access

    A Zero‐Dimensional Hybrid Tin Halide with Efficient Near‐Infrared Luminescence for Intelligent Defect Inspection

    by Qian Yang, Yunluo Wang, Futing Sun, Jiaxin Hu, Zhiyu Qin, Zesen Gao, Wen Chen, Xiaoyan Li, Yan Yang, Xun Yao, et al.

    Near‐infrared (NIR) luminescent materials have attracted considerable attention for biomedical imaging and industrial inspection because of their deep penetration capability and strong technical adaptability. Coupling NIR luminescence with deep‐learning algorithms further offers a promising route toward intelligent inspection with enhanced automation and accuracy. Here, we report a 0D, Sn halide (MBI) 2 SnCl 6 (MBI = 2‐methylbenzimidazole), composed of organic MBI + cations and isolated [SnCl 6 ] 2− octahedra, and Sb substitution yields broadband NIR emission with a highest photoluminescence quantum yield of 59.19%. On this basis, subvisible defects on silicon wafer surfaces can be clearly visualized. When integrated with a U‐Net‐based convolutional neural network, the NIR imaging output enables rapid and automated defect identification, allowing accurate discrimination between qualified and defective wafers as well as subclassification of defective samples, with an average accuracy of 90.92% and an average recall of 92.92%. This work establishes an effective strategy for integrating lead‐free NIR‐emissive halides with artificial intelligence for intelligent inspection and highlights the potential of hybrid halide luminescent materials in advanced industrial imaging applications.

  • Thermoelectric Performance Optimization toward Practical and Wearable Applications

    by Menghan Shang, Tingting Sun, Vladimir G. Kytin, Vladimir A. Kulbachinskii, Lianjun Wang, Wan Jiang

    Conspectus: Although maximizing the thermoelectric figure of merit (zT) has long been the central objective in thermoelectric research, our studies reveal that high intrinsic material performance alone cannot guarantee a stable and efficient thermoelectric output in practical operating environments. During long-term device operation, interfacial degradation, elemental interdiffusion, thermomechanical mismatch, and contact instability frequently induce severe performance deterioration, indicating that practical applications require not only high-performance materials but also stable electrical, thermal, and mechanical integration across the entire device architecture. This evolution from material-centered optimization toward system-level design has become increasingly important with the emergence of new application scenarios, particularly wearable electronics. Unlike conventional waste-heat recovery systems with large and stable temperature gradients, wearable thermoelectrics work at soft human–device interfaces under ultralow, spatially heterogeneous and dynamically fluctuating thermal conditions. In such working scenarios, thermoelectric performance is no longer determined merely by intrinsic material efficiency, while effective heat utilization, interfacial thermal contact, mechanical adaptability and stable output become equally essential. In this context, wearable thermoelectrics can be regarded as an extension of thermoelectric technology toward application-specific device architectures, where the optimization of material properties is coupled with interfacial engineering, heat utilization, and mechanical integration to meet the stringent requirements of human-centered energy harvesting. Driven by these demands, our research contributions have progressively expanded in two interconnected directions. The first focused on developing high-performance and operationally stable traditional thermoelectric systems through the coordinated regulation of carrier transport, phonon scattering, interfacial diffusion, and module reliability. The second extended thermoelectric system toward wearable applications requires that materials and devices simultaneously maintain energy conversion capability, mechanical deformability, and stable thermal contact under continuous deformation and dynamic thermal environments. This Account first summarizes our progress in developing high-performance bulk thermoelectric materials and a stable device output. By adopting carbon modification, elemental doping, diffusion barrier construction, and optimized module design, we developed multiple strategies to optimize electrical transport, suppress thermal conduction, stabilize microstructures, and reduce interfacial electrical loss simultaneously. We further discuss the advancement of flexible thermoelectric systems driven by wearable applications. Flexible thermoelectric devices are fabricated via heterogeneous interface engineering, printing techniques, and structural optimization to balance carrier transport performance, mechanical compliance, and scalable manufacturing. In addition, we developed ionic thermoelectric systems based on ion thermodiffusion and thermogalvanic effects. Such systems exhibit ultrahigh thermopower under ultralow-temperature gradients, together with inherent flexibility. To address the intrinsic trade-off between ionic transport and mechanical robustness, we established effective ion-regulation strategies based on molecular interaction modulation, selective ion migration control, phase-separated structures, and nanofiber reinforcement. Finally, we demonstrate how thermoelectric fibers and textile-integrated three-dimensional architectures further transform wearable thermoelectrics from flexible materials to integrated systems. By improving heat flow alignment, stable thermal contact, multidimensional deformation tolerance, and structural integration density, these architectures enable stable body heat harvesting and multifunctional sensing under realistic wearable conditions. Overall, this work reveals that thermoelectric research is gradually evolving from the singular pursuit of intrinsic performance enhancement toward integrated regulation of transport behavior, interfacial stability, structural adaptability, and thermal management across multiple scales.

  • Fluorine‐Compensation Strategy to Prepare Lead‐Free Double Perovskite‐Embedded Composite Ceramics for Laser‐Driven Lighting With High CRI

    by Weijie Li, Beiying Zhou, Lei Li, Yinghan Zhang, Zesheng Pan, Zhongyang Ge, LiePeng Yuan, Lianjun Wang, Wan Jiang

    Laser‐driven lighting demands robust color converters with broad, continuous spectra to achieve high‐fidelity illumination, yet conventional phosphors often suffer from spectral deficiencies that lower the color rendering index (CRI) and cause visual discomfort. To address this, we develop CaF 2 ‐Cs 2 Na 0.7 Ag 0.3 In 0.97 Bi 0.03 Cl 6 composite phosphor ceramics (CPCs) utilizing spark plasma sintering at temperatures below 490°C. A fluoride‐mediated defect compensation mechanism, in which F − ions migrate from the CaF 2 matrix into Cl − vacancies of the double perovskite, simultaneously facilitates full densification and passivates non‐radiative recombination centers. This dual effect enables the CPCs to emit warm white light with a full width at half maximum of 224 nm and a near‐unity relative photoluminescence quantum yield. The CPCs also exhibit superior stability against heat, moisture, and laser irradiation, together with a high thermal conductivity of 9.4 W·m − 1 ·K − 1 at 25°C. A prototype laser‐driven lighting device based on these CPCs delivers high‐quality warm white light with a CRI (R a ) of 96. This work establishes a fluoride‐compensation low‐temperature sintering strategy for robust lead‐free double perovskite‐embedded CPCs with broadband emission, targeting high‐fidelity laser‐driven lighting.

  • Hydrochloric Acid-Assisted Synthesis of Red Emissive Hybrid Mn2+ Halides for Wide Gamut Displays

    by Huidong Tang, Pengcheng Jiang, Jingdan Yan, Simeng Wu, Rui Yang, Xin Xiong, Zhi Wu, Sanhai Wang, Yanqiao Xu, Qing Hu, et al.

    Lead-free red emissive hybrid Mn2+-based metal halides have emerged as promising phosphors for lighting and display applications owing to their environmental friendliness and d–d transition. However, simultaneously enhancing emission efficiency and narrowing the red-emission bandwidth of Mn2+ halide phosphors remains challenging. Here, we report an HCl-assisted precipitation strategy for synthesizing (CH3)4NMnCl3 phosphors. The introduction of HCl creates an acidic and chloride-rich chemical environment, thereby improving crystallization and luminescence emission efficiency. The as-prepared (CH3)4NMnCl3 phosphors exhibit a red emission at 629 nm with a photoluminescence quantum yield of 70.77% and a narrow full width at half-maximum of 75.16 nm. The phosphors have good thermal stability (retained 80.77% of initial PL intensity at 423 K) and thermal-cycling stability. The as-fabricated light-emitting diodes (LEDs) using (CH3)4NMnCl3 as red emitters exhibit excellent operational stability, with 98.29% of initial luminous efficiency (LE) being maintained after 224 h of continuous operation. In addition, the assembled white LED delivers an LE of 88.41 lm/W and achieves a wide gamut covering 101.7% of the NTSC 1931. These results provide an effective strategy for achieving efficient and narrow-band hybrid Mn2+ halide phosphors, offering a promising lead-free emitter for wide-gamut display applications.


  • Open Access

    Lightweight, Elastic Ceramic Fabrics for Broadband Electromagnetic Absorption and High Temperature Thermal Insulation

    by Jiahao Yang, Qi Ding, Juanjuan Xu, Fei Yan, Rui Wang, Yuena Zhang, Chao Zhao, Zhi Cheng, Yuchi Fan, Wan Jiang

    With the rapid advancement of communication and radar detection in aerospace applications, developing a high‐performance electromagnetic wave (EMW) absorber with mechanical elasticity and high‐temperature thermal insulation remains urgent and challenging. Here, lightweight, elastic SiBCNZr ceramic nanofiber fabrics with outstanding electromagnetic absorption (EMA) and high‐temperature thermal insulation were developed by precisely controlling the microstructure during ultrafast high‐temperature sintering (UHS). The fabrics achieved a minimum reflection loss ( RL min ) of −83.33 dB and an effective absorption bandwidth (EAB) of 9.8 GHz, covering the entire X‐ and Ku‐bands. This performance arose from a balance between impedance matching and EMW attenuation, enabled by UHS‐controlled precipitation of defect‐rich t ‐ZrO 2 nanograins and turbostratic C nanoclusters. Furthermore, the fabrics showed elastic resilience up to 60% compressive strain, attributed to defect‐assisted dislocation activity, interfacial accommodation, nanoscale fiber diameters, and weak inter‐fiber friction. Finally, the fabrics exhibited excellent thermal insulation (∆T ≈ 900°C) and low thermal conductivity (0.0603 W·m −1 ·K −1 ), because heat transport in both the solid and gas phases was suppressed by nanoscale grains, grain defects, abundant heterointerfaces, and high porosity. This work establishes an effective strategy for simultaneously enhancing EMA, mechanical elasticity, and thermal insulation, highlighting the potential of these fabrics for advanced aerospace applications.


  • Enhanced broadband transparency and mechanical properties of MgF2 ceramics enabled by pinning with MgO nanoparticles

    by Zhongyang Ge, Weijie Li, Lei Li, Liepeng Yuan, Jiayi Ye, Beiying Zhou, Lianjun Wang, Wan Jiang