Yuya Yamaguchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yuya Yamaguchi has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Atsushi Kanno
Network Research Institute, National Institute of Information and Communication Technology, Tokyo, Japan
9 shared publications - Pham Tien Dat
Network Research Institute, National Institute of Information and Communication Technology, Tokyo, Japan
9 shared publications Junichiro Ichikawa
Sumitomo Osaka Cement Co. Ltd
7 shared publicationsNaokatsu Yamamoto
National Institute of Information and Communications Technology, 4-2-1, Nukui-Kitamachi, Koganei, Tokyo, Japan
6 shared publicationsRyo Shimizu
Sumitomo Osaka Cement Co. Ltd
6 shared publicationsShingo Takano
Sumitomo Osaka Cement Co. Ltd
6 shared publications
Latest Publications
- 31 August 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 26 (2) , 024087
Focusing surface-acoustic-wave resonators on thin-film lithium niobate with transverse-mode suppression
Surface-acoustic-wave (SAW) resonators are a promising platform for constructing hybrid quantum systems, where confined acoustic waves enable strong interactions with various physical systems. Focusing SAW resonators, which reduce mode volume while suppressing diffraction losses, have recently been investigated for applications in such hybrid systems. However, the resonator leads to additional transverse-mode resonances, which cause undesired responses. In this work, we develop focusing SAW resonators using a thin-film lithium niobate on sapphire. A film thinner than the SAW wavelength allows a highly confined acoustic-wave mode to be localized on the substrate surface. By using contoured electrodes following a two-dimensional Gaussian beam shape, we focus the SAW mode to near the diffraction limit and confirm this focusing via optical imaging. Furthermore, by engineering the spatial mode overlap of the interdigital transducer electrodes, we suppress the excitation of higher-order transverse modes.
- 31 August 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 26 (2) , 024087
Focusing surface-acoustic-wave resonators on thin-film lithium niobate with transverse-mode suppression
Surface-acoustic-wave (SAW) resonators are a promising platform for constructing hybrid quantum systems, where confined acoustic waves enable strong interactions with various physical systems. Focusing SAW resonators, which reduce mode volume while suppressing diffraction losses, have recently been investigated for applications in such hybrid systems. However, the resonator leads to additional transverse-mode resonances, which cause undesired responses. In this work, we develop focusing SAW resonators using a thin-film lithium niobate on sapphire. A film thinner than the SAW wavelength allows a highly confined acoustic-wave mode to be localized on the substrate surface. By using contoured electrodes following a two-dimensional Gaussian beam shape, we focus the SAW mode to near the diffraction limit and confirm this focusing via optical imaging. Furthermore, by engineering the spatial mode overlap of the interdigital transducer electrodes, we suppress the excitation of higher-order transverse modes.
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-11
Photonics-Enabled Simultaneous THz Signal Demultiplexing and Downconversion
Terahertz (THz) signal processing is crucial for enabling key applications in the THz band. However, conventional electronics-based solutions face several limitations, largely due to the limited roll-off characteristics of electronic devices, which make multiplexing and demultiplexing densely THz signals challenging. Photonic technology offers unique advantages, including wide bandwidth, low loss, steep roll-off, and high flexibility. In this paper, we present a photonic approach for simultaneous THz signal reception, demultiplexing, and downconversion by converting multiplexed THz signals into the optical domain and leveraging advanced photonic signal processing. As a proof-of-concept demonstration, we validate the system for millimeter-wave signals in the W band and THz signals in the 300-GHz band, achieving aggregate capacities of 150 Gb/s and 220 Gb/s, respectively. We also discuss the applicability and outlook of the proposed system for key THz-band applications, including multiple radio access, multi-user access networks, and integrated access and backhaul. The proposed system can pave the way for THz communications in 6G and beyond.
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-11
Photonics-Enabled Simultaneous THz Signal Demultiplexing and Downconversion
Terahertz (THz) signal processing is crucial for enabling key applications in the THz band. However, conventional electronics-based solutions face several limitations, largely due to the limited roll-off characteristics of electronic devices, which make multiplexing and demultiplexing densely THz signals challenging. Photonic technology offers unique advantages, including wide bandwidth, low loss, steep roll-off, and high flexibility. In this paper, we present a photonic approach for simultaneous THz signal reception, demultiplexing, and downconversion by converting multiplexed THz signals into the optical domain and leveraging advanced photonic signal processing. As a proof-of-concept demonstration, we validate the system for millimeter-wave signals in the W band and THz signals in the 300-GHz band, achieving aggregate capacities of 150 Gb/s and 220 Gb/s, respectively. We also discuss the applicability and outlook of the proposed system for key THz-band applications, including multiple radio access, multi-user access networks, and integrated access and backhaul. The proposed system can pave the way for THz communications in 6G and beyond.
- 1 January 2025
- Published by Optica Publishing Group
- p. Th4D.4
Fully Packaged 100-GHz-Bandwidth EO-Equalizer- Integrated TFLN Modulator with Record-High Slope Efficiency Enabling 200-GBaud Signaling
We developed a fully packaged 100-GHz-bandwidth TFLN modulator utilizing an electro-optic frequency-domain equalizer with record-high slope efficiency, enabling the first measurable TDEC/TDECQ of 200-Gbaud OOK and 184-Gbaud PAM4 without receiver-side digital equalizers. Furthermore, BER measurements up to 255 Gbaud and 528 Gbps are reported.
- 1 January 2025
- Published by Optica Publishing Group
- p. Th4D.4
Fully Packaged 100-GHz-Bandwidth EO-Equalizer- Integrated TFLN Modulator with Record-High Slope Efficiency Enabling 200-GBaud Signaling
We developed a fully packaged 100-GHz-bandwidth TFLN modulator utilizing an electro-optic frequency-domain equalizer with record-high slope efficiency, enabling the first measurable TDEC/TDECQ of 200-Gbaud OOK and 184-Gbaud PAM4 without receiver-side digital equalizers. Furthermore, BER measurements up to 255 Gbaud and 528 Gbps are reported.
- Open Access
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (10) , 3554-3562
High-Speed Low-Complexity Optical PAM Links With a High-Slope-Efficiency Optical Modulator: Analysis and Demonstration
Achieving high data rate with simple system configuration and low power consumption is of great interest in short-reach intensity-modulation direct-detection (IM-DD) fiber links for future datacenter networks, business local area networks and so forth. For external modulation-based IM-DD, recently remarkable modulator performance has been achieved in terms of 3 dB bandwidth, exploiting different materials/platforms. However, due to the relatively-high RF-to-RF (or end-to-end) signal loss, optical amplifiers (OA) and/or RF amplifiers (RFA) were typically needed for IM-DD links, which increases the complexity and power dissipation. In this work, we present a more comprehensive figure of merit (FoM) for modulator (and link) design, namely “slope efficiency (SLE)”, which takes into account not only the bandwidth but also the half-wave voltage and the RF/optical waveguide losses, and can provide a guiding principle of the modulator design toward lower RF-to-RF signal loss. With a high-SLE modulator, both OA and RFA can be omitted even when supporting broadband signals with CMOS-level driving voltages. We theoretically investigate the impact of modulators with different technology and SLE on the IM-DD pulse amplitude modulation (PAM) link. Next, we report a series of PAM transmission experiments with a high-SLE Lithium Niobate intensity modulator prototype, which enables sub-1 Vpp driving, up-to-432 Gb/s PAM transmission over up-to-600 m single-mode fiber in C-band with OA&RFA-free reception and low digital signal processing (DSP) complexity. For instance, for 384 Gb/s PAM8 over 300 m, the transmitter was DSP-free while a symbol-spaced decision-feedback equalizer (DFE) with 61 feedforward taps and 1 feedback tap was sufficient for the receiver considering 16.7% hard-decision (HD)-FEC. Furthermore, we experimentally show that the high-SLE modulator supports ultra-wide fiber transmission bands (O-, S-, C- and L-band).
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (10) , 3554-3562
Open AccessHigh-Speed Low-Complexity Optical PAM Links With a High-Slope-Efficiency Optical Modulator: Analysis and Demonstration
Achieving high data rate with simple system configuration and low power consumption is of great interest in short-reach intensity-modulation direct-detection (IM-DD) fiber links for future datacenter networks, business local area networks and so forth. For external modulation-based IM-DD, recently remarkable modulator performance has been achieved in terms of 3 dB bandwidth, exploiting different materials/platforms. However, due to the relatively-high RF-to-RF (or end-to-end) signal loss, optical amplifiers (OA) and/or RF amplifiers (RFA) were typically needed for IM-DD links, which increases the complexity and power dissipation. In this work, we present a more comprehensive figure of merit (FoM) for modulator (and link) design, namely “slope efficiency (SLE)”, which takes into account not only the bandwidth but also the half-wave voltage and the RF/optical waveguide losses, and can provide a guiding principle of the modulator design toward lower RF-to-RF signal loss. With a high-SLE modulator, both OA and RFA can be omitted even when supporting broadband signals with CMOS-level driving voltages. We theoretically investigate the impact of modulators with different technology and SLE on the IM-DD pulse amplitude modulation (PAM) link. Next, we report a series of PAM transmission experiments with a high-SLE Lithium Niobate intensity modulator prototype, which enables sub-1 Vpp driving, up-to-432 Gb/s PAM transmission over up-to-600 m single-mode fiber in C-band with OA&RFA-free reception and low digital signal processing (DSP) complexity. For instance, for 384 Gb/s PAM8 over 300 m, the transmitter was DSP-free while a symbol-spaced decision-feedback equalizer (DFE) with 61 feedforward taps and 1 feedback tap was sufficient for the receiver considering 16.7% hard-decision (HD)-FEC. Furthermore, we experimentally show that the high-SLE modulator supports ultra-wide fiber transmission bands (O-, S-, C- and L-band).
- 1 January 2024
- Published by Optica Publishing Group
- p. M3K.4
Thin-Film Lithium Niobate Modulator for a Flat Frequency-Response over 110 GHz Bandwidth with Integrated Electro-Optic Frequency-Domain Equalizer
We demonstrated an optical modulator with an ultra-flat frequency-response over 110 GHz by using a thin-film lithium niobate platform and the integration of an electro-optic frequency-domain equalizer. The half-wave voltage was 2.4 V, and we measured an extinction ratio exceeding 40 dB.
- 1 January 2024
- Published by Optica Publishing Group
- p. M3K.4
Thin-Film Lithium Niobate Modulator for a Flat Frequency-Response over 110 GHz Bandwidth with Integrated Electro-Optic Frequency-Domain Equalizer
We demonstrated an optical modulator with an ultra-flat frequency-response over 110 GHz by using a thin-film lithium niobate platform and the integration of an electro-optic frequency-domain equalizer. The half-wave voltage was 2.4 V, and we measured an extinction ratio exceeding 40 dB.
- 17 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (3) , 1173-1182
Terahertz Signal Transparent Relay and Switching Using Photonic Technology
Terahertz-wave (THz) is considered a potential candidate for extreme communications in 6G and beyond networks owing to its large bandwidth. Nevertheless, extremely high free-space loss and weak penetration remain as bottlenecks, which makes it difficult to transmit THz signals from outdoor to indoor and in areas having barriers, walls, and obstacles. In this study, we propose a dual-hop access network in the THz band using photonics-enabled signal transparent relay and routing. In the system, THz signals are received and directly converted to optical signals using THz-to-optical converters. After transmission over fiber links, the signals are converted back to THz signals without using any waveform and frequency conversions. As the proof-of-concept demonstration, the transparent relay and switching of THz-wave signals is demonstrated using a low-loss optical modulator and ultra-fast tunable laser. A 32-Gb/s orthogonal frequency-division multiplexing signal was successfully transmitted over a switchable fiber–THz–fiber–THz system in the 285-GHz band. The possibility of switching the THz signals in ultrashort time of 10 μs was experimentally confirmed. The proposed system paves the way for the deployment of THz communications in 6G and beyond networks.
- 17 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (3) , 1173-1182
Terahertz Signal Transparent Relay and Switching Using Photonic Technology
Terahertz-wave (THz) is considered a potential candidate for extreme communications in 6G and beyond networks owing to its large bandwidth. Nevertheless, extremely high free-space loss and weak penetration remain as bottlenecks, which makes it difficult to transmit THz signals from outdoor to indoor and in areas having barriers, walls, and obstacles. In this study, we propose a dual-hop access network in the THz band using photonics-enabled signal transparent relay and routing. In the system, THz signals are received and directly converted to optical signals using THz-to-optical converters. After transmission over fiber links, the signals are converted back to THz signals without using any waveform and frequency conversions. As the proof-of-concept demonstration, the transparent relay and switching of THz-wave signals is demonstrated using a low-loss optical modulator and ultra-fast tunable laser. A 32-Gb/s orthogonal frequency-division multiplexing signal was successfully transmitted over a switchable fiber–THz–fiber–THz system in the 285-GHz band. The possibility of switching the THz signals in ultrashort time of 10 μs was experimentally confirmed. The proposed system paves the way for the deployment of THz communications in 6G and beyond networks.
- Open Access
- 21 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 29 (5: Teraher) , 1-8
Advanced Optical Modulators for Sub-THz-to-Optical Signal Conversion
The use of sub-terahertz (sub-THz) and/or THz bands is a method of achieving some attractive applications such as future large-capacity radio over fiber (RoF) networks. However, in the current scenario, the performance of devices operating in the THz band is considerably worse than that of devices operating in the microwave band. An optical modulator is a device that converts electrical signals such as microwave, sub-THz, and THz signals to optical signals, and their conversion efficiency decreases when they are operated at higher frequencies. In this article, we investigate two types of optical modulators. One is a long effective-length modulator to maximize its responsivity in the >100 GHz range. It has an advantage for band-limited applications such as RoF. The other is a broadband modulator integrated with an electro-optic (EO) frequency-domain equalizer. The fabricated modulator achieved an over 110-GHz 3-dB bandwidth by customizing the optical circuit diagram in a traveling-wave modulator, and in a numerical estimation, the 3-dB bandwidth reached sub-THz. We also investigated the modulation distortions of the modulator with the equalizer. Using the measurement results, the optical crosstalk in the EO equalizer of the fabricated modulator was estimated to be less than −30 dB, and the distortion attributable to the EO equalizer in the modulator was sufficiently small to be negligible. We also measured a third-order intermodulation distortion, and the results showed that integration of the equalizer does not cause a degradation of modulation linearity. The obtained spurious-free dynamic range was as high as 83.3 dB.
- 21 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 29 (5: Teraher) , 1-8
Open AccessAdvanced Optical Modulators for Sub-THz-to-Optical Signal Conversion
The use of sub-terahertz (sub-THz) and/or THz bands is a method of achieving some attractive applications such as future large-capacity radio over fiber (RoF) networks. However, in the current scenario, the performance of devices operating in the THz band is considerably worse than that of devices operating in the microwave band. An optical modulator is a device that converts electrical signals such as microwave, sub-THz, and THz signals to optical signals, and their conversion efficiency decreases when they are operated at higher frequencies. In this article, we investigate two types of optical modulators. One is a long effective-length modulator to maximize its responsivity in the >100 GHz range. It has an advantage for band-limited applications such as RoF. The other is a broadband modulator integrated with an electro-optic (EO) frequency-domain equalizer. The fabricated modulator achieved an over 110-GHz 3-dB bandwidth by customizing the optical circuit diagram in a traveling-wave modulator, and in a numerical estimation, the 3-dB bandwidth reached sub-THz. We also investigated the modulation distortions of the modulator with the equalizer. Using the measurement results, the optical crosstalk in the EO equalizer of the fabricated modulator was estimated to be less than −30 dB, and the distortion attributable to the EO equalizer in the modulator was sufficiently small to be negligible. We also measured a third-order intermodulation distortion, and the results showed that integration of the equalizer does not cause a degradation of modulation linearity. The obtained spurious-free dynamic range was as high as 83.3 dB.
- Open Access
- 17 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 3883-3891
Traveling-Wave Mach-Zehnder Modulator Integrated With Electro-Optic Frequency-Domain Equalizer for Broadband Modulation
Broadband modulator is a key component of future high-capacity and high-baud-rate optical fiber communication. An electro-optic (EO) frequency-domain equalizer is proposed and investigated to increase the 3-dB bandwidth of optical modulators. The equalizer can be integrated with conventional traveling-wave modulators using a crossing waveguide, U-turn waveguide, or ferroelectric-domain-inversion. The 3-dB bandwidth of the modulator can be doubled by integrating the equalizer. As a theoretical consideration, we modeled several types of EO equalizers and investigated the function and parameter dependency of the equalizers in detail. For the experimental demonstration, a titanium-diffused lithium niobate optical waveguide modulator integrated with the EO equalizer was fabricated. The optical loss including fiber-coupling was as low as 5.4 dB, and the half-wave voltage was 3.7 V. The measured electro-optic response at 110 GHz is –0.4 dB, and that of the 3-dB bandwidth is larger than 110 GHz, which is the upper frequency limit of our measurement equipment. The 3-dB bandwidth of the modulator estimated using the fitting curve obtained from the measured electrical propagation loss of the modulator electrode was approximately 200 GHz.
- 17 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 3883-3891
Open AccessTraveling-Wave Mach-Zehnder Modulator Integrated With Electro-Optic Frequency-Domain Equalizer for Broadband Modulation
Broadband modulator is a key component of future high-capacity and high-baud-rate optical fiber communication. An electro-optic (EO) frequency-domain equalizer is proposed and investigated to increase the 3-dB bandwidth of optical modulators. The equalizer can be integrated with conventional traveling-wave modulators using a crossing waveguide, U-turn waveguide, or ferroelectric-domain-inversion. The 3-dB bandwidth of the modulator can be doubled by integrating the equalizer. As a theoretical consideration, we modeled several types of EO equalizers and investigated the function and parameter dependency of the equalizers in detail. For the experimental demonstration, a titanium-diffused lithium niobate optical waveguide modulator integrated with the EO equalizer was fabricated. The optical loss including fiber-coupling was as low as 5.4 dB, and the half-wave voltage was 3.7 V. The measured electro-optic response at 110 GHz is –0.4 dB, and that of the 3-dB bandwidth is larger than 110 GHz, which is the upper frequency limit of our measurement equipment. The 3-dB bandwidth of the modulator estimated using the fitting curve obtained from the measured electrical propagation loss of the modulator electrode was approximately 200 GHz.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (17) , 923-926
Performance Comparison of Photonic Downconversion for Uplink Mobile Fronthaul
This study compares the performance of photonic downconversion technology using single and dual wavelength modulation methods using an optical phase modulator. We compared the system characteristics, including the conversion gain, phase noise, and spurious-free dynamic range, of the two approaches. To demonstrate the proof-of-concept, we transmitted high-order quadrature amplitude modulation orthogonal frequency-division multiplexing signals in the 43 and 52 GHz bands over the system. The results confirm the potential of the system as a promising solution for uplink mobile fronthaul in high-frequency bands, such as in 5G-Advanced networks.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (17) , 923-926
Performance Comparison of Photonic Downconversion for Uplink Mobile Fronthaul
This study compares the performance of photonic downconversion technology using single and dual wavelength modulation methods using an optical phase modulator. We compared the system characteristics, including the conversion gain, phase noise, and spurious-free dynamic range, of the two approaches. To demonstrate the proof-of-concept, we transmitted high-order quadrature amplitude modulation orthogonal frequency-division multiplexing signals in the 43 and 52 GHz bands over the system. The results confirm the potential of the system as a promising solution for uplink mobile fronthaul in high-frequency bands, such as in 5G-Advanced networks.