Jianyong Zhang
Research Subjects
Jianyong Zhang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Mansour
Geology Department, Faculty of Science, Minia University, Minia 61519, Egypt
2 shared publications - Haowei Zhang
School of Geoscience and Technology, Southwest Petroleum University, Chengdu 610500, China
2 shared publications - Hengye Wei
School of Geoscience and Technology, Southwest Petroleum University, Chengdu 610500, China
2 shared publications - Jian Wang
School of Geoscience and Technology, Southwest Petroleum University, Chengdu 610500, China
2 shared publications - Lijun Shen
School of Geoscience and Technology, Southwest Petroleum University, Chengdu 610500, China
2 shared publications - Mohamed Saad Ahmed
Geology and Geophysics Department, College of Science, King Saud University, Riyadh, Saudi Arabia
2 shared publications
Latest Publications
- Open Access
Impact of Overpressure on the Preservation of Liquid Petroleum: Evidence from Fluid Inclusions in the Deep Reservoirs of the Tazhong Area, Tarim Basin, Western China
The complexity of petroleum phases in deep formations plays an important role in the evaluation of hydrocarbon resources. Pressure is considered to have a positive impact on the preservation of liquid oils, yet direct evidence for this phenomenon is lacking in the case of deep reservoirs due to late destruction. Here, we present fluid-inclusion assemblages from a deep reservoir in the Tazhong area of the Tarim Basin, northwestern China, which formed as a direct consequence of fluid pressure evolution. Based on thermodynamic measurements and simulations of the coexisting aqueous and petroleum inclusions in these assemblages, the history of petroleum activities was reconstructed. Our results show that all analyzed fluid-inclusion assemblages demonstrated variable pressure conditions in different charging stages, ranging from hydrostatic to overpressure (a pressure coefficient of up to 1.49). Sequential petroleum charging and partial oil cracking may have been the main contributors to overpressure. By comparing the phases of petroleum and fluid pressures in the two wells, ZS1 and ZS5, it can be inferred that overpressure inhibits oil cracking. Thus, overpressure exerts an important influence on the preservation of liquid hydrocarbon under high temperatures. Furthermore, our results reveal that the exploration potential for liquid petroleum is considerable in the deep reservoirs of the Tarim Basin.
Open AccessImpact of Overpressure on the Preservation of Liquid Petroleum: Evidence from Fluid Inclusions in the Deep Reservoirs of the Tazhong Area, Tarim Basin, Western China
The complexity of petroleum phases in deep formations plays an important role in the evaluation of hydrocarbon resources. Pressure is considered to have a positive impact on the preservation of liquid oils, yet direct evidence for this phenomenon is lacking in the case of deep reservoirs due to late destruction. Here, we present fluid-inclusion assemblages from a deep reservoir in the Tazhong area of the Tarim Basin, northwestern China, which formed as a direct consequence of fluid pressure evolution. Based on thermodynamic measurements and simulations of the coexisting aqueous and petroleum inclusions in these assemblages, the history of petroleum activities was reconstructed. Our results show that all analyzed fluid-inclusion assemblages demonstrated variable pressure conditions in different charging stages, ranging from hydrostatic to overpressure (a pressure coefficient of up to 1.49). Sequential petroleum charging and partial oil cracking may have been the main contributors to overpressure. By comparing the phases of petroleum and fluid pressures in the two wells, ZS1 and ZS5, it can be inferred that overpressure inhibits oil cracking. Thus, overpressure exerts an important influence on the preservation of liquid hydrocarbon under high temperatures. Furthermore, our results reveal that the exploration potential for liquid petroleum is considerable in the deep reservoirs of the Tarim Basin.
- Open Access
Reply to Yin, J. Comment on “Zhang et al. New Age Constraints of the Bilong Co Oil Shale in the Qiangtang Basin, Northern Tibet: Evidence from In Situ U–Pb Dating and Palaeontology. Minerals 2024, 14, 246”
The comment by Yin (2024) referred to the systematic morphology and identification of the newly recovered in situ ammonite assemblage Tiltoniceras sp. and Hildoceratidae sp. from the Bilong Co section in the Qiangtang Basin. Yin (2024) suggests that Tiltoniceras sp. should be assigned to Oxycerites aspidoides. Upon re-examination of our paper and the reply to the released comment, it is demonstrated that the morphologic characteristics of the recovered ammonites are more consistent with Tiltoniceras rather than Oxycerites aspidoides. These ammonites, along with in situ calcite U–Pb age (ca. 181 Ma), carbon isotope stratigraphy, and age-diagnostic palynomorphs, constrain the age of the Bilong Co oil shale to the Lower Jurassic (Toarcian) with plausible credentials.
Open AccessReply to Yin, J. Comment on “Zhang et al. New Age Constraints of the Bilong Co Oil Shale in the Qiangtang Basin, Northern Tibet: Evidence from In Situ U–Pb Dating and Palaeontology. Minerals 2024, 14, 246”
The comment by Yin (2024) referred to the systematic morphology and identification of the newly recovered in situ ammonite assemblage Tiltoniceras sp. and Hildoceratidae sp. from the Bilong Co section in the Qiangtang Basin. Yin (2024) suggests that Tiltoniceras sp. should be assigned to Oxycerites aspidoides. Upon re-examination of our paper and the reply to the released comment, it is demonstrated that the morphologic characteristics of the recovered ammonites are more consistent with Tiltoniceras rather than Oxycerites aspidoides. These ammonites, along with in situ calcite U–Pb age (ca. 181 Ma), carbon isotope stratigraphy, and age-diagnostic palynomorphs, constrain the age of the Bilong Co oil shale to the Lower Jurassic (Toarcian) with plausible credentials.
- Open Access
New Age Constraints of the Bilong Co Oil Shale in the Qiangtang Basin, Northern Tibet: Evidence from In Situ U–Pb Dating and Palaeontology
The Bilong Co oil shale is one of the most significant source rocks in the Mesozoic Qiangtang Basin (Northern Tibet); however, its absolute chronology remains controversial. In this study, in situ carbonate U–Pb isotope dating analysis was carried out for the first time. Detailed field geological investigations yielded some age-diagnostic ammonites, enabling a re-evaluation of the stratigraphic age of the Bilong Co oil shale. A total of 61 spots of U–Pb isotope dating from the middle part of the Bilong Co oil shale section suggests an average age of 181 ± 13 Ma. Elemental geochemistry and diagenetic analysis indicate that the proposed age represents the early deposition of the calcite, and the oil shale was deposited during the Early Jurassic time. This estimated age is further supported by the newly discovered ammonite assemblage of Hildoceratidae–Tiltoniceras sp. at the top part of the oil shale section, which confirms the deposition of the oil shale during the Toarcian age of the late Early Jurassic. Consequently, the Bilong Co oil shale can be assigned to the Quse Formation, which is attributed to the Lower Jurassic rather than the Middle Jurassic. The re-assessment of the stratigraphic age of the Bilong Co oil shale is of great significance for regional evaluation and exploration activities of hydrocarbon source rock layers in the Qiangtang Basin as well as for global stratigraphic correlation of the late Early Jurassic Toarcian oceanic anoxic event.
Open AccessNew Age Constraints of the Bilong Co Oil Shale in the Qiangtang Basin, Northern Tibet: Evidence from In Situ U–Pb Dating and Palaeontology
The Bilong Co oil shale is one of the most significant source rocks in the Mesozoic Qiangtang Basin (Northern Tibet); however, its absolute chronology remains controversial. In this study, in situ carbonate U–Pb isotope dating analysis was carried out for the first time. Detailed field geological investigations yielded some age-diagnostic ammonites, enabling a re-evaluation of the stratigraphic age of the Bilong Co oil shale. A total of 61 spots of U–Pb isotope dating from the middle part of the Bilong Co oil shale section suggests an average age of 181 ± 13 Ma. Elemental geochemistry and diagenetic analysis indicate that the proposed age represents the early deposition of the calcite, and the oil shale was deposited during the Early Jurassic time. This estimated age is further supported by the newly discovered ammonite assemblage of Hildoceratidae–Tiltoniceras sp. at the top part of the oil shale section, which confirms the deposition of the oil shale during the Toarcian age of the late Early Jurassic. Consequently, the Bilong Co oil shale can be assigned to the Quse Formation, which is attributed to the Lower Jurassic rather than the Middle Jurassic. The re-assessment of the stratigraphic age of the Bilong Co oil shale is of great significance for regional evaluation and exploration activities of hydrocarbon source rock layers in the Qiangtang Basin as well as for global stratigraphic correlation of the late Early Jurassic Toarcian oceanic anoxic event.
- Open Access
Sedimentary Facies Types and Their Control of Reservoirs in the Lower Jurassic Lacustrine Facies Shale of the Lianggaoshan Formation, Northeastern Sichuan Basin, China
In recent years, new breakthroughs have been made in the field of shale oil and gas exploration in the Lower Jurassic Lianggaoshan Formation in Sichuan Basin. At present, there is a lack of systematic studies on reservoir properties and sedimentary facies of the Lianggaoshan Formation shale. Therefore, in this study, taking the Lianggaoshan Formation in Sichuan Basin as an example, the sedimentary facies types of shale reservoirs and their control over shale oil and gas are systematically studied, based on a large number of outcrops, experimental testing, logging, and seismic interpretation methods. The results show that five sedimentary microfacies are developed in the Lianggaoshan Formation in the study area, namely, semi-deep lake mud, shallow lake mud, wave-influenced shallow lake mud, delta-influenced shallow lake mud, and underwater interbranch bay microfacies. The stratum thickness of the Lianggaoshan Formation is in the range of 26–315 m, and mainly distributed in the eastern region, but rapidly thinned in the northwestern region. The sedimentary sequence framework of the Lianggaoshan Formation has been constructed. Moreover, the lithology of the Lianggaoshan Formation shale has been divided into three types, including shale, massive mudstone and silty mudstone. The brittleness index and total organic carbon (TOC) value of three types of shale show a negative correlation. Silty mudstone has the highest brittleness, while that of black shale is the lowest. For porosity and permeability, massive mudstone is better than silty mudstone, and silty mudstone is better than black shale. There are many kinds of matrix pores in the Lianggaoshan Formation shale, and the development degree of inorganic pores is higher than that of organic pores. Finally, based on the analysis of oil-bearing, pore types, physical properties and productivity, it is considered that black shale facies is the most favorable lithofacies type. The deep–semi-deep lacustrine facies belt obviously controls the shale oil enrichment of the Lianggaoshan Formation.
Open AccessSedimentary Facies Types and Their Control of Reservoirs in the Lower Jurassic Lacustrine Facies Shale of the Lianggaoshan Formation, Northeastern Sichuan Basin, China
In recent years, new breakthroughs have been made in the field of shale oil and gas exploration in the Lower Jurassic Lianggaoshan Formation in Sichuan Basin. At present, there is a lack of systematic studies on reservoir properties and sedimentary facies of the Lianggaoshan Formation shale. Therefore, in this study, taking the Lianggaoshan Formation in Sichuan Basin as an example, the sedimentary facies types of shale reservoirs and their control over shale oil and gas are systematically studied, based on a large number of outcrops, experimental testing, logging, and seismic interpretation methods. The results show that five sedimentary microfacies are developed in the Lianggaoshan Formation in the study area, namely, semi-deep lake mud, shallow lake mud, wave-influenced shallow lake mud, delta-influenced shallow lake mud, and underwater interbranch bay microfacies. The stratum thickness of the Lianggaoshan Formation is in the range of 26–315 m, and mainly distributed in the eastern region, but rapidly thinned in the northwestern region. The sedimentary sequence framework of the Lianggaoshan Formation has been constructed. Moreover, the lithology of the Lianggaoshan Formation shale has been divided into three types, including shale, massive mudstone and silty mudstone. The brittleness index and total organic carbon (TOC) value of three types of shale show a negative correlation. Silty mudstone has the highest brittleness, while that of black shale is the lowest. For porosity and permeability, massive mudstone is better than silty mudstone, and silty mudstone is better than black shale. There are many kinds of matrix pores in the Lianggaoshan Formation shale, and the development degree of inorganic pores is higher than that of organic pores. Finally, based on the analysis of oil-bearing, pore types, physical properties and productivity, it is considered that black shale facies is the most favorable lithofacies type. The deep–semi-deep lacustrine facies belt obviously controls the shale oil enrichment of the Lianggaoshan Formation.
- Open Access
Self-Sourced Unconventional Tight Marlstone Reservoir Potential from Evaporative Lagoon of Triassic Leikoupo Formation in the Central Sichuan Basin
A breakthrough was made in tight marlstone reservoirs from an evaporative lagoon in the second sub-member of the third member of the Leikoupo Formation (Lei3-2) in the Central Sichuan Basin. The source rock characteristics, reservoir characteristics of the marlstone and geochemical parameters of the oil and natural gas were investigated to evaluate the unconventional hydrocarbon exploration potential of the tight marlstone from the evaporative lagoon. The results revealed that the source rocks were deposited in evaporative lagoon environments, and the average total organic carbon (TOC) content value for the samples was 0.75 wt%. The thermal maturity of the organic matter was relatively high, with a calculated vitrinite reflectance (Rc) of 1.7%. The characteristics of marlstones suggest that the potential source rocks had fair to good hydrocarbon generative potential. The condensate samples had low densities, low viscosities and high thermal maturity, with a Rc value of 1.7%. For the natural gas, the dry coefficient was around 0.90, and the carbon isotopic compositions of methane and ethane was −41.3‰ and −28.4‰, respectively. According to the carbon isotopic compositions, thermal maturity and geological background, the oil and natural gas from Lei3-2 are comparable with the marlstone of Lei3-2. Thus, the oil and natural gas is self-sourced and originates from the marlstone in the Lei3-2. Micropores and microfractures are often detected in the marlstone from Lei3-2, and a gypsum layer is conducive to the hydrocarbon preservation. These results suggest that the evaporative lagoon facies in Lei3-2 have large, self-sourced, unconventional, tight marlstone reservoir potential. This study also enhances the prospects for further oil and gas exploration of evaporative lagoon facies in other basins.
Open AccessSelf-Sourced Unconventional Tight Marlstone Reservoir Potential from Evaporative Lagoon of Triassic Leikoupo Formation in the Central Sichuan Basin
A breakthrough was made in tight marlstone reservoirs from an evaporative lagoon in the second sub-member of the third member of the Leikoupo Formation (Lei3-2) in the Central Sichuan Basin. The source rock characteristics, reservoir characteristics of the marlstone and geochemical parameters of the oil and natural gas were investigated to evaluate the unconventional hydrocarbon exploration potential of the tight marlstone from the evaporative lagoon. The results revealed that the source rocks were deposited in evaporative lagoon environments, and the average total organic carbon (TOC) content value for the samples was 0.75 wt%. The thermal maturity of the organic matter was relatively high, with a calculated vitrinite reflectance (Rc) of 1.7%. The characteristics of marlstones suggest that the potential source rocks had fair to good hydrocarbon generative potential. The condensate samples had low densities, low viscosities and high thermal maturity, with a Rc value of 1.7%. For the natural gas, the dry coefficient was around 0.90, and the carbon isotopic compositions of methane and ethane was −41.3‰ and −28.4‰, respectively. According to the carbon isotopic compositions, thermal maturity and geological background, the oil and natural gas from Lei3-2 are comparable with the marlstone of Lei3-2. Thus, the oil and natural gas is self-sourced and originates from the marlstone in the Lei3-2. Micropores and microfractures are often detected in the marlstone from Lei3-2, and a gypsum layer is conducive to the hydrocarbon preservation. These results suggest that the evaporative lagoon facies in Lei3-2 have large, self-sourced, unconventional, tight marlstone reservoir potential. This study also enhances the prospects for further oil and gas exploration of evaporative lagoon facies in other basins.
- Open Access
Paleoenvironment of the Lower Ordovician Meitan Formation in the Sichuan Basin and Adjacent Areas, China
The quality of hydrocarbon source rocks is affected by the sedimentary paleoenvironment. A paleoenvironment with anoxia and a high paleoproductivity is beneficial to source rocks. The paleoenvironment of the Lower Ordovician Meitan Formation of the Sichuan Basin and its adjacent areas is lacking, restricting the oil and gas exploration of the Ordovician in the Sichuan Basin and its adjacent areas. In this paper, the content of major and trace elements of 50 samples was tested to clarify the paleoenvironment of the Meitan Formation. The paleoclimate, paleosalinity, paleoredox, and paleoproductivity during the deposition of the Meitan Formation were analyzed. The control effect of the paleoenvironment on the development of source rocks was clarified, and the favorable paleoenvironment for source rock development was pointed out. The results show that the paleoenvironment of the Meitan Formation has the following characteristics: humidity, brackish water, oxygen depletion, anoxia environment, and high paleoproductivity. These characteristics are conducive to the development of poor and moderate source rocks. The source rocks of the Meitan Formation were developed in the north, west, and south of the Sichuan Basin and its adjacent areas. The organic matter of the source rocks is mainly typed II1 kerogen, and the quality is evaluated as poor-medium source rocks having the potential of generating oil and gas. This study can provide fundamental parameters for the further exploration of Ordovician petroleum.
Open AccessPaleoenvironment of the Lower Ordovician Meitan Formation in the Sichuan Basin and Adjacent Areas, China
The quality of hydrocarbon source rocks is affected by the sedimentary paleoenvironment. A paleoenvironment with anoxia and a high paleoproductivity is beneficial to source rocks. The paleoenvironment of the Lower Ordovician Meitan Formation of the Sichuan Basin and its adjacent areas is lacking, restricting the oil and gas exploration of the Ordovician in the Sichuan Basin and its adjacent areas. In this paper, the content of major and trace elements of 50 samples was tested to clarify the paleoenvironment of the Meitan Formation. The paleoclimate, paleosalinity, paleoredox, and paleoproductivity during the deposition of the Meitan Formation were analyzed. The control effect of the paleoenvironment on the development of source rocks was clarified, and the favorable paleoenvironment for source rock development was pointed out. The results show that the paleoenvironment of the Meitan Formation has the following characteristics: humidity, brackish water, oxygen depletion, anoxia environment, and high paleoproductivity. These characteristics are conducive to the development of poor and moderate source rocks. The source rocks of the Meitan Formation were developed in the north, west, and south of the Sichuan Basin and its adjacent areas. The organic matter of the source rocks is mainly typed II1 kerogen, and the quality is evaluated as poor-medium source rocks having the potential of generating oil and gas. This study can provide fundamental parameters for the further exploration of Ordovician petroleum.