Yoonjun Cho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yoonjun Cho has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Jong Hyeok Park
Department of Chemical and Biomolecular Engineering Yonsei University Seodaemun‐gu Seoul Republic of Korea
4 shared publications - Kan Zhang
School of Materials Science and Engineering Nanjing University of Science and Technology Nanjing 210094 China
2 shared publications - Kug-Seung Lee
Pohang University of Science and Technology (POSTECH)
2 shared publications Bingjun Jin
MIIT Key Laboratory of Advanced Display Materials and Devices, Institute of Optoelectronics and Nanomaterials, School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, P. R. China
1 shared publicationChaoran Dong
MIIT Key Laboratory of Advanced Display Material and Devices, School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
1 shared publicationCheolwoo Park
Department of Chemical and Biological Engineering, Sookmyung Women's University, Seoul 04310, Republic of Korea
1 shared publication
Latest Publications
- Open Access
- 21 September 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (41)
Water‐Mediated Proton Facilitation for Stable Acidic CO 2 Electrocatalysis
Electrochemical CO 2 conversion in acid can, in principle, maximize carbon efficiency but is typically undermined by facile hydrogen evolution. Moreover, operating at high current density often triggers a sharp local pH increase that propagates into the bulk electrolyte, causing an overall pH shift that erodes nominally “acidic CO 2 reduction” toward neutral/alkaline conditions. To address these limitations, we incorporated Ce species with high proton affinity into the surface of porous Cu nanosheet, constructing proton‐mitigating Cu─O─Ce active sites. Beyond conventional C─C coupling driven by local * CO accumulation, Cu─O─Ce motifs accelerate * CO formation and its protonation, thereby enabling downhill proton‐coupled electron transfer (PCET) toward and beyond * CO─ * CHO dimerization. This strategy demonstrates efficient multi‐carbon generation under retentive pH conditions minimizing the collateral deficiencies of acidic CO 2 reduction. Facilitating kinetically suppressed C─C coupling at a relatively low current density offers a strategic catalyst design that maintains a stable bulk pH compared to high current density operations, thereby maximizing the in situ generation of CO 2 within the acidic media.
- 21 September 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (41)
Open AccessWater‐Mediated Proton Facilitation for Stable Acidic CO 2 Electrocatalysis
Electrochemical CO 2 conversion in acid can, in principle, maximize carbon efficiency but is typically undermined by facile hydrogen evolution. Moreover, operating at high current density often triggers a sharp local pH increase that propagates into the bulk electrolyte, causing an overall pH shift that erodes nominally “acidic CO 2 reduction” toward neutral/alkaline conditions. To address these limitations, we incorporated Ce species with high proton affinity into the surface of porous Cu nanosheet, constructing proton‐mitigating Cu─O─Ce active sites. Beyond conventional C─C coupling driven by local * CO accumulation, Cu─O─Ce motifs accelerate * CO formation and its protonation, thereby enabling downhill proton‐coupled electron transfer (PCET) toward and beyond * CO─ * CHO dimerization. This strategy demonstrates efficient multi‐carbon generation under retentive pH conditions minimizing the collateral deficiencies of acidic CO 2 reduction. Facilitating kinetically suppressed C─C coupling at a relatively low current density offers a strategic catalyst design that maintains a stable bulk pH compared to high current density operations, thereby maximizing the in situ generation of CO 2 within the acidic media.
- 11 August 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (62) , 15415-15436
Recent advances in understanding surface reconstruction for oxygen evolution reaction electrocatalysts: insights from density functional theory
This review highlights surface reconstruction as a key route to adaptive OER interfaces and shows how DFT clarifies the coupled electronic, defect, compositional, and electrolyte effects that guide catalyst design.
- 11 August 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (62) , 15415-15436
Recent advances in understanding surface reconstruction for oxygen evolution reaction electrocatalysts: insights from density functional theory
This review highlights surface reconstruction as a key route to adaptive OER interfaces and shows how DFT clarifies the coupled electronic, defect, compositional, and electrolyte effects that guide catalyst design.
- 16 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 10 (17) , 9488-9496
Precise synthesis of single-atom Mo, W, Nb coordinated with oxygen functional groups of graphene oxide for stable and selective two-electron oxygen reduction in neutral media
We have developed a one-pot solvothermal strategy for single-atom catalyst synthesis (M = Mo, W, Nb) with M–Ox–C moieties for effective H2O2 production via a two-electron oxygen reduction reaction.
- 16 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 10 (17) , 9488-9496
Precise synthesis of single-atom Mo, W, Nb coordinated with oxygen functional groups of graphene oxide for stable and selective two-electron oxygen reduction in neutral media
We have developed a one-pot solvothermal strategy for single-atom catalyst synthesis (M = Mo, W, Nb) with M–Ox–C moieties for effective H2O2 production via a two-electron oxygen reduction reaction.
- 17 December 2021
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 15 (2) , 672-679
A two-photon tandem black phosphorus quantum dot-sensitized BiVO4 photoanode for solar water splitting
A two-photon tandem absorption E-BiVO4/BPQDs/OL-OEC photoanode with superior light absorbability and photocurrent density.
- 17 December 2021
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 15 (2) , 672-679
A two-photon tandem black phosphorus quantum dot-sensitized BiVO4 photoanode for solar water splitting
A two-photon tandem absorption E-BiVO4/BPQDs/OL-OEC photoanode with superior light absorbability and photocurrent density.
- 1 May 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-01 (31) , 1597
(Invited) Multiple Heterojunction in Single Titanium Dioxide Nanomaterials for Photocatalysis and Photoelectrochemical Cells
Despite a longstanding controversy surrounding TiO2 materials, TiO2 polymorphs with heterojunctions composed of anatase and rutile outperform individual polymorphs because of the type-II energetic band alignment at the heterojunction interface. Improvement in photocatalysis has also been achieved via black TiO2 with a thin disorder layer surrounding ordered TiO2. However, localization of this disorder layer in a conventional single TiO2 nanoparticle with the heterojunction composed of anatase and rutile has remained a big challenge. Here we report the selective positioning of a disorder layer of controlled thicknesses between the anatase and rutile phases by a conceptually different synthetic route to access highly efficient novel metal-free photocatalysis for H2 production. The presence of localized disorder layer within a single TiO2 nanoparticle was confirmed for the first time by high-resolution transmission electron microscopy (TEM) with electron energy-loss spectroscopy (EELS) and inline electron holography. Multiple heterojunctions in single TiO2 nanoparticles composed of crystalline anatase/disordered rutile/ordered rutile layers give the nanoparticles superior electron/hole separation efficiency and novel metal-free surface reactivity, which concomitantly yields an H2 production rate that is ~11 times higher than that of Pt decorated conventional anatase and rutile single heterojunction TiO2 systems.
- 1 May 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-01 (31) , 1597
(Invited) Multiple Heterojunction in Single Titanium Dioxide Nanomaterials for Photocatalysis and Photoelectrochemical Cells
Despite a longstanding controversy surrounding TiO2 materials, TiO2 polymorphs with heterojunctions composed of anatase and rutile outperform individual polymorphs because of the type-II energetic band alignment at the heterojunction interface. Improvement in photocatalysis has also been achieved via black TiO2 with a thin disorder layer surrounding ordered TiO2. However, localization of this disorder layer in a conventional single TiO2 nanoparticle with the heterojunction composed of anatase and rutile has remained a big challenge. Here we report the selective positioning of a disorder layer of controlled thicknesses between the anatase and rutile phases by a conceptually different synthetic route to access highly efficient novel metal-free photocatalysis for H2 production. The presence of localized disorder layer within a single TiO2 nanoparticle was confirmed for the first time by high-resolution transmission electron microscopy (TEM) with electron energy-loss spectroscopy (EELS) and inline electron holography. Multiple heterojunctions in single TiO2 nanoparticles composed of crystalline anatase/disordered rutile/ordered rutile layers give the nanoparticles superior electron/hole separation efficiency and novel metal-free surface reactivity, which concomitantly yields an H2 production rate that is ~11 times higher than that of Pt decorated conventional anatase and rutile single heterojunction TiO2 systems.
- 13 April 2018
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2018-01 (31) , 1892
(Invited) Surface Engineering of Metal Oxide Photoanodes for Photoelectrochemical Solar Water Splitting
The development of new types of energy generation devices is promoted by increasing public awareness that the Earth's oil reserves could run out during this century. As the energy needs of the planet are likely to double within the next 50 years, the stage is set for a major energy shortage, unless renewable energy can cover the substantial deficit left by fossil fuels. Photoelectrochemical (PEC) solar water splitting has become a central research theme for more than four decades, still, their efficiencies remain low. Despite extensive efforts devoted to modifying photoelectrodes through various bandgap and catalysis engineering, the efficient methodologies for charge transfer at electrode/electrolyte interface remain underdeveloped. In this seminar, I will introduce various unique methods to increase light harvesting efficiency to generate hydrogen from solar light by applying disordered engineering to metal oxide materials. Especially, high efficiency TiO2, WO3, and BiVO4 photoanodes with the modification and charge transfer across the electrode/electrolyte interface will be presented.
- 13 April 2018
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2018-01 (31) , 1892
(Invited) Surface Engineering of Metal Oxide Photoanodes for Photoelectrochemical Solar Water Splitting
The development of new types of energy generation devices is promoted by increasing public awareness that the Earth's oil reserves could run out during this century. As the energy needs of the planet are likely to double within the next 50 years, the stage is set for a major energy shortage, unless renewable energy can cover the substantial deficit left by fossil fuels. Photoelectrochemical (PEC) solar water splitting has become a central research theme for more than four decades, still, their efficiencies remain low. Despite extensive efforts devoted to modifying photoelectrodes through various bandgap and catalysis engineering, the efficient methodologies for charge transfer at electrode/electrolyte interface remain underdeveloped. In this seminar, I will introduce various unique methods to increase light harvesting efficiency to generate hydrogen from solar light by applying disordered engineering to metal oxide materials. Especially, high efficiency TiO2, WO3, and BiVO4 photoanodes with the modification and charge transfer across the electrode/electrolyte interface will be presented.
- 13 April 2018
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2018-01 (8) , 785
Vertically Oriented MoS2 with Spatially Controlled Geometry on Nitrogenous Graphene Sheets for High-Performance Sodium-Ion Batteries
Lithium-ion battery (LIB) has been a tremendous success for decades. As the demand for rechargeable batteries surges, a need has arisen for low-cost secondary batteries. Among various studies, sodium-ion battery (SIB) is the most promising secondary batteries due to its similar working principles and the abundance of sodium in the natural world. Among many anode materials for SIB, MoS2 has attracted attention because it can intercalate sodium ions in its layered structure. However, in the repeated intercalation of Na+ , MoS2 suffers from collapse of its layered structure. Herein, we present vertically grown MoS2 on nitrogenous reduced graphene oxides (N-RGO) with controlled sheet density and height of MoS2 sheets as SIB anode active material. The MoS2 materials are synthesized by gel-precursor based method. By adjusting the nucleation and growth processes, we controlled the height and density of MoS2 sheets to find optimal condition that show great performance and high stability. Control of the partial geometry can achieve these improved property because the high sheet density can prevent additional SEI layer and the shortened sheet length reduces the resistance of Na+ diffusion. It shows remarkably high reversible discharging capacity of 255mAh/g at 1C and 245mAh/g at 5C discharging with a capacity reduction of 5.35% after 1300 cycles. And closely packed MoS2 sheets shows specific capacity of 254, 243, 153, 86 mAh/g at 0.2, 2, 10, 50A/g current density, respectively. Furthermore, vertically grown MoS2 is paired with Na3V2(PO4)3 to fabricate SIB full cell, and the full cell shows a specific capacity of 262mAh/g (based on the mass of anode material) during 50 cycles. Figure 1
- 13 April 2018
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2018-01 (8) , 785
Vertically Oriented MoS2 with Spatially Controlled Geometry on Nitrogenous Graphene Sheets for High-Performance Sodium-Ion Batteries
Lithium-ion battery (LIB) has been a tremendous success for decades. As the demand for rechargeable batteries surges, a need has arisen for low-cost secondary batteries. Among various studies, sodium-ion battery (SIB) is the most promising secondary batteries due to its similar working principles and the abundance of sodium in the natural world. Among many anode materials for SIB, MoS2 has attracted attention because it can intercalate sodium ions in its layered structure. However, in the repeated intercalation of Na+ , MoS2 suffers from collapse of its layered structure. Herein, we present vertically grown MoS2 on nitrogenous reduced graphene oxides (N-RGO) with controlled sheet density and height of MoS2 sheets as SIB anode active material. The MoS2 materials are synthesized by gel-precursor based method. By adjusting the nucleation and growth processes, we controlled the height and density of MoS2 sheets to find optimal condition that show great performance and high stability. Control of the partial geometry can achieve these improved property because the high sheet density can prevent additional SEI layer and the shortened sheet length reduces the resistance of Na+ diffusion. It shows remarkably high reversible discharging capacity of 255mAh/g at 1C and 245mAh/g at 5C discharging with a capacity reduction of 5.35% after 1300 cycles. And closely packed MoS2 sheets shows specific capacity of 254, 243, 153, 86 mAh/g at 0.2, 2, 10, 50A/g current density, respectively. Furthermore, vertically grown MoS2 is paired with Na3V2(PO4)3 to fabricate SIB full cell, and the full cell shows a specific capacity of 262mAh/g (based on the mass of anode material) during 50 cycles. Figure 1