Sofiane Khelladi
Sofiane Khelladi has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Abdelchafik Hadjadj
LACoSERE Laboratory, University of Amar Telidji, Laghouat 03000, Algeria
5 shared publications - Khadidja Saci
University Amar Telidji
4 shared publications - Achour Ales
Ecole Militaire Polytechnique
2 shared publications - Cristina Morel
ESTACA’Lab-Laval, École Supérieure des Techniques Aéronautiques et de Construction Automobile (ESTACA), F-53000 Laval, France
2 shared publications - Nassim Rizoug
ESTACA’Lab-Laval, École Supérieure des Techniques Aéronautiques et de Construction Automobile (ESTACA), F-53000 Laval, France
2 shared publications A. Bensaci
University Amar Telidji
1 shared publication
Latest Publications
- Open Access
Broadband Simulation-Based EMC Modeling and EMI Assessment of a GaN-Based Phase-Shift Full-Bridge Converter for EV DC Powertrains
Nowadays, numerical simulation methods are advanced and widely used in industry, enabling the modeling of complex systems from printed circuit boards (PCBs) to full power converters. Among many isolated topologies, the phase-shift full-bridge (PSFB) topology is a well-established solution for isolated DC–DC conversion in electric vehicles. Therefore, this paper proposes a broadband electromagnetic compatibility (EMC) modeling methodology for a custom-designed 1 kW gallium nitride (GaN)-based PSFB converter intended for an electric vehicle (EV) DC powertrain. Moreover, the approach combines full-wave electromagnetic simulation with circuit-level simulation, including parasitic effects from PCB layout, power harnesses, and discrete components. Thus, the virtual prototype is assessed within a complete virtual test bench compliant with the standard Comité International Spécial des Perturbations Radioélectriques (CISPR) 25 over the 150 kHz–108 MHz range to capture common-mode (CM) and differential-mode (DM) conducted electromagnetic interference (EMI). Results show that the converter achieves efficiencies of 97.26% in standalone mode and 97.03% when integrated into the full DC powertrain. However, the conducted EMI assessment reveals that both CM and DM emissions exceed CISPR 25 Class 2 limits across the entire spectrum, with excess levels reaching up to 72 dBµV. Therefore, power harnesses significantly increase EMI levels at low frequencies due to the distributed inductance and stray capacitance. Finally, this study demonstrates the value of virtual prototyping for simulation-based EMI prediction in early-stage power converter design.
Open AccessBroadband Simulation-Based EMC Modeling and EMI Assessment of a GaN-Based Phase-Shift Full-Bridge Converter for EV DC Powertrains
Nowadays, numerical simulation methods are advanced and widely used in industry, enabling the modeling of complex systems from printed circuit boards (PCBs) to full power converters. Among many isolated topologies, the phase-shift full-bridge (PSFB) topology is a well-established solution for isolated DC–DC conversion in electric vehicles. Therefore, this paper proposes a broadband electromagnetic compatibility (EMC) modeling methodology for a custom-designed 1 kW gallium nitride (GaN)-based PSFB converter intended for an electric vehicle (EV) DC powertrain. Moreover, the approach combines full-wave electromagnetic simulation with circuit-level simulation, including parasitic effects from PCB layout, power harnesses, and discrete components. Thus, the virtual prototype is assessed within a complete virtual test bench compliant with the standard Comité International Spécial des Perturbations Radioélectriques (CISPR) 25 over the 150 kHz–108 MHz range to capture common-mode (CM) and differential-mode (DM) conducted electromagnetic interference (EMI). Results show that the converter achieves efficiencies of 97.26% in standalone mode and 97.03% when integrated into the full DC powertrain. However, the conducted EMI assessment reveals that both CM and DM emissions exceed CISPR 25 Class 2 limits across the entire spectrum, with excess levels reaching up to 72 dBµV. Therefore, power harnesses significantly increase EMI levels at low frequencies due to the distributed inductance and stray capacitance. Finally, this study demonstrates the value of virtual prototyping for simulation-based EMI prediction in early-stage power converter design.
- Open Access
- 30 July 2021
- Published by Advanced Electromagnetics in Advanced Electromagnetics
- Vol. 10 (2) , 56-66
A Hybrid Common Mode Choke Optimization Method for Input Line EMI Filter Design
In this paper, an optimization method of toroidal core-based Hybrid common-mode chokes (HCMCs) for the design of an Electromagnetic interferences (EMI) filter is proposed. A dedicated algorithm is developed using MATLAB to characterize compact HCMCs that exhibit effective CommonMode (CM) chokes with optimized leakage inductances by systematic variations in the winding patterns and geometric dimensions of their magnetic cores. It takes into consideration the physical limitations of these components as well as the constraints related to the design of EMI filters. The proposed algorithm allows through a small computational task to propose a variety of configurations for optimal HCMCs. Finite element method (FEM) simulations are conducted on the HCMCs to extract their CM and leakage inductances. The results are compared with those calculated analytically and yield a good match. The performances of optimized HCMCs are evaluated through their implementation in the designed filter. All the cases of HCMCs including the smallest one allow the EMI filter to easily qualify a power converter to an electromagnetic compatibility (EMC) standard.
- 30 July 2021
- Published by Advanced Electromagnetics in Advanced Electromagnetics
- Vol. 10 (2) , 56-66
Open AccessA Hybrid Common Mode Choke Optimization Method for Input Line EMI Filter Design
In this paper, an optimization method of toroidal core-based Hybrid common-mode chokes (HCMCs) for the design of an Electromagnetic interferences (EMI) filter is proposed. A dedicated algorithm is developed using MATLAB to characterize compact HCMCs that exhibit effective CommonMode (CM) chokes with optimized leakage inductances by systematic variations in the winding patterns and geometric dimensions of their magnetic cores. It takes into consideration the physical limitations of these components as well as the constraints related to the design of EMI filters. The proposed algorithm allows through a small computational task to propose a variety of configurations for optimal HCMCs. Finite element method (FEM) simulations are conducted on the HCMCs to extract their CM and leakage inductances. The results are compared with those calculated analytically and yield a good match. The performances of optimized HCMCs are evaluated through their implementation in the designed filter. All the cases of HCMCs including the smallest one allow the EMI filter to easily qualify a power converter to an electromagnetic compatibility (EMC) standard.
- 22 December 2019
- Published by Springer Nature
- p. 632-640
Experimental EMC Qualification Test of an EMI Filter for a DC-DC Converter Intended to Smart Grid Applications
- 22 December 2019
- Published by Springer Nature
- p. 632-640
Experimental EMC Qualification Test of an EMI Filter for a DC-DC Converter Intended to Smart Grid Applications
- 22 December 2019
- Published by Springer Nature
- p. 610-616
Impact of SiC/Si Technology on the Conducted EMI Generated by a Buck Converter
- 22 December 2019
- Published by Springer Nature
- p. 610-616
Impact of SiC/Si Technology on the Conducted EMI Generated by a Buck Converter