RMRasha Shakir Mahmood

Rasha Shakir Mahmood

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rasha Shakir Mahmood has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermodynamic and Kinetic Studies of Photochemically Produced Co 3 O 4 NPs for the Adsorption of Pentachlorophenol Pesticide From Irrigation Water

    by Rasha Shakir Mahmood, Younis Turki Mahmood, Ahmed Mahdi Rheima, Nibras Abdul Ameer Aboud

    Pesticide pollution of irrigation water is one of the most significant problems that researchers are concerned about. In this work, cobalt oxide nanoparticles were prepared using an effective photochemical synthesis, which was used to remove pentachlorophenol pesticide from irrigation water. By using X‐ray diffraction (XRD), scanning electron microscopy (SEM), and energy‐dispersive X‐ray spectroscopy (EDX), the structural and morphological properties of the synthesized cobalt oxide nanoparticles are characterized. Adsorption experiments revealed that the maximum removal efficiency was achieved at a temperature of 323 K, pH 2, with 0.1 g of Co 3 O 4 and a contact time of 60 min. Thermodynamic parameters (Δ H ° = +10.27 kJ·mol −1 , Δ S ° = +41.51 J·mol −1 ·K −1 , and Δ G ° = −3.13 kJ·mol −1 ) were calculated to evaluate the nature of the adsorption process, where the results indicated that the adsorption of PCP onto Co 3 O 4 NPs is endothermic and spontaneous under the tested conditions. Also, the equilibrium data were determined using the Freundlich ( R 2 = 0.997) and Langmuir isotherms ( R 2 = 0.5333), which illustrate that the adsorption process was multilayer on the Co 3 O 4 nanoparticle surface. On the other hand, the kinetic data indicate that the adsorption process is related to the pseudo‐first‐order model ( R 2 > 0.9095).

  • Open Access

    Enhanced Electrochemical Performance of γ‐Fe 2 O 3 /Cr 2 O 3 /Graphene Oxide/Sodium Alginate Hybrid Nanocomposite Aerogels for High‐Efficiency Ultracapacitors

    by Rasha Shakir Mahmood, Dhia Hadi Hussain

    This study looks at how to manufacture cost‐effective, sustainable, and high‐performance energy storage materials. Although there has been significant development in graphene oxide‐based materials, challenges such as the accumulation of graphene sheets, weak cycling stability, and insufficient pseudocapacitive contributions reduce their efficiency, so this work looks to ride these challenges by manufacturing a stable, high‐capacity, and environmentally friendly hybrid quaternary nanocomposite γ‐Fe 2 O 3 /Cr 2 O 3 /GO/SA aerogel by using the inexpensive sonication method. The structural and morphological characterization of this hybrid nanocomposite was done using different techniques such as x‐ray diffraction, field emission scanning electron, energy dispersive spectroscopy, and Raman spectroscopy technique. The capacitive performance was determined using a three‐electrode system workstation. This hybrid nanocomposite achieved an excellent specific capacity of 1032 F.g −1 at a current density of 1 mA.g −1 , along with a good energy density of 430 Wh.kg −1 and a power density of 9110 W.kg −1 , and this means it achieved about a 2.5 times improvement more than traditional GO‐based materials. These impressive results belong to the excellent surface area of the γ‐Fe 2 O 3 /Cr 2 O 3 /GO/SA hybrid aerogel, provided by adding two types of semiconductors (γ‐Fe 2 O 3 and Cr 2 O 3 ), which reduces the graphene oxide sheets agglomeration. Furthermore, they also have a multioxidation state that makes them suitable for redox reactions, which leads to the addition of a pseudocapacitive to the overall capacitance. The hybrid nanocomposite also appears to have impressive cycling stability and a high coulombic efficiency of up to 98% after 7000 cycles, making it suitable for energy storage devices.


  • Open Access

    Surface Properties of Graphene and Graphene Oxide Aerogels for Energy Storage Applications

    by Rasha Shakir Mahmood, Dhiaa Hadi Hussian

    Surface Properties of Graphene and Graphene Oxide Aerogels for Energy Storage Applications


  • Open Access

    Study the Electrochemical Performance of a Novel Pseudosupercapacitor Fabricated by a Quaternary Aerogel System (ZnO/TiO2/GO/SA)

    by Rasha Shakir Mahmood, Dhia Hadi Hussain

    A quaternary hybrid nanocomposite was prepared from ZnO/TiO2/GO/SA with different proportions of graphene oxide (10%, 20%, and 30%) through the use of the liquid blending method. The change in the composition of the structure of the nanocomposite was diagnosed using Raman spectroscopy, X‐ray diffraction (XRD), energy‐dispersive spectroscopy (EDS), and field emission scanning electron microscope techniques (FESEM), and the effect of changing the proportion of graphene oxide on the electrochemical performance was studied through the use of the three‐electrode system. From the results, it was found that the electrode ZnO/TiO2/GO/SA with a ratio of 30% of graphene oxide achieved the highest specific capacity of 350 F/g at a current density of 1 mA/g due to its high surface area as a result of the increased percentage of graphene oxide. Thus, it has a large number of active sites and a low internal resistance of the electrode itself. Also, this electrode achieved a high energy density value of up to 194 Wh/kg and a power density of 994 W/kg. The charging‐discharging cycles of the electrode ZnO/TiO2/GO/SA with a ratio of 30% remained stable at 98% for 5000 cycles at a current density of 9 mA/g. That means this electrode is suitable for energy storage devices such as supercapacitors.


  • The uptake of Eriochrome Black T dye from Wastewater utilizing synthetized Cadmium Sulfide Nanoparticles

    by Rasha Shakir Mahmood

    Eriochrome Black T dye is an indicator of complex titration as water hardness, as an azo dye, blue in its deprotonated form, and turns red when it forms a complex with metal ions such as Ca, Mg, Cd . .etc. Water contamination is considered one of the most important problems that threaten human life on earth. An efficient method is done to remove EBT from wastewater via using cadmium sulfide Nanoparticles (CdS NPS) that was prepared by using an inexpensive and simple method (chemical precipitation) and was diagnosed this nanomaterial using an X-ray diffractometer (XRD), Transmission electron microscope (TEM), Scanning electron microscope (SEM) and Energy Dispersive X-Ray Analyzer (EDX). TEM characterization results for CdS nanoparticles illustrated that the nanoparticles have a pointy shape-like needles morphology and with miscellaneous sizes, the statistical calculation gives (32) nm as the rate particle size.Through this study, the CdS nanomaterial proved that it has a high ability to adsorb Eriochrome Black-T (EBT) dye under certain conditions where we noticed that the maximum adsorption capacity of this dye by CdS nanoparticles was at Temperature (293) K, (pH = 6) and at a concentration (0.01 g) of the CdS nanomaterial with contact time up to (40) minutes and CdS. Also calculated the thermodynamic functions, (ΔS, ΔH, ΔG), we found that the process was spontaneous and exothermic under the specific condition through The thermodynamic parameters.