Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fengbo Yu has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Cross-Linked Fungal Biotemplate Enables Highly Efficient Nanomaterial Recovery and Reutilization as Porous Carbon

    by Jiewen Luo, Fengbo Yu

    Waste nanomaterials pose environmental and human health concerns and they need to be urgently and efficiently managed. In this study, a fungal biotemplate was used to accumulate and recover nano-Fe2O3 materials from an aqueous solution. Then, recovered nano-Fe2O3 materials were activated to form a high-performance magnetic porous carbon composite (FePC) for energy storage and organic pollutant removal. The results indicate that high concentrations (500 mg/L) of 50 nm Fe2O3 particles can be completely recovered using a cross-linked Neurospora crassa fungus (NC), primarily because of its encapsulation function. In addition, the surface area, degree of graphitization, and heteroatom content of the FePC materials can be boosted by the catalytic effects of the incorporated Fe atoms. The developed FePC materials exhibit potential as high electrical double-layer capacitors as well as strong retention capabilities, excellent stability, and efficient adsorption of triclosan (TCS, ~526 mg/g). Additionally, these FePC materials exhibit superior capacities for energy storage and pollutant reduction compared to commercial and reported carbon materials. These results reveal a sustainable route for the recovery and reutilization of nanomaterials.

  • Top Cited Papers
    Open Access

    Continuous and low-carbon production of biomass flash graphene

    by Xiangdong Zhu, Litao Lin, Mingyue Pang, Chao Jia, Longlong Xia, Guosheng Shi, Shicheng Zhang, Yuanda Lu, Liming Sun, Fengbo Yu, et al.

    Flash Joule heating (FJH) is an emerging and profitable technology for converting inexhaustible biomass into flash graphene (FG). However, it is challenging to produce biomass FG continuously due to the lack of an integrated device. Furthermore, the high-carbon footprint induced by both excessive energy allocation for massive pyrolytic volatiles release and carbon black utilization in alternating current-FJH (AC-FJH) reaction exacerbates this challenge. Here, we create an integrated automatic system with energy requirement-oriented allocation to achieve continuous biomass FG production with a much lower carbon footprint. The programmable logic controller flexibly coordinated the FJH modular components to realize the turnover of biomass FG production. Furthermore, we propose pyrolysis-FJH nexus to achieve biomass FG production. Initially, we utilize pyrolysis to release biomass pyrolytic volatiles, and subsequently carry out the FJH reaction to focus on optimizing the FG structure. Importantly, biochar with appropriate resistance is self-sufficient to initiate the FJH reaction. Accordingly, the medium-temperature biochar-based FG production without carbon black utilization exhibited low carbon emission (1.9 g CO2-eq g−1 graphene), equivalent to a reduction of up to ~86.1% compared to biomass-based FG production. Undoubtedly, this integrated automatic system assisted by pyrolysis-FJH nexus can facilitate biomass FG into a broad spectrum of applications.


  • Open Access

    Transient co-tuning of atomic Fe and nanoparticle facets for self-relaying Fenton-like catalysis

    by Jiewen Luo, Xiangdong Zhu, Fengbo Yu, Chao Jia, Chao Liu, Qing Zhao, Xiaoli Zhao, Fengchang Wu

    Fenton-like catalysts are important materials for degrading refractory organic pollutants, however, they still suffer from limited oxidizing ability. Although single atoms and nanoparticles with high-index facets are commonly used in catalysis, their high surface energy hinders controllable synthesis. Here, we construct an iron-based material containing both isolated single atoms and high-index faceted nanoparticles by carbon-assisted Flash Joule heating for organic pollutant remediation. The current-induced thermal shock benefits the excitation of iron atoms and subsequent trapping by graphene defects. At ultrahigh temperatures, the thermodynamic limitations are overcome, leading to nanoparticles with high-index facets. Density functional theory calculations indicate that hydroxyl radical production can be enhanced by self-relay catalysis via the ensemble effect between single atoms and high-index facet nanoparticles. The derived materials exhibit dramatically improved performance in terms of antibiotic removal and medical micropolluted water. Thus, this method presents an effective strategy for designing smart materials for organic wastewater purification.


  • Open Access

    Rapid self-heating synthesis of Fe-based nanomaterial catalyst for advanced oxidation

    by Fengbo Yu, Chao Jia, Xuan Wu, Liming Sun, Zhijian Shi, Tao Teng, Litao Lin, Zhelin He, Jie Gao, Shicheng Zhang, et al.

    Iron-based catalysts are promising candidates for advanced oxidation process-based wastewater remediation. However, the preparation of these materials often involves complex and energy intensive syntheses. Further, due to the inherent limitations of the preparation conditions, it is challenging to realise the full potential of the catalyst. Herein, we develop an iron-based nanomaterial catalyst via soft carbon assisted flash joule heating (FJH). FJH involves rapid temperature increase, electric shock, and cooling, the process simultaneously transforms a low-grade iron mineral (FeS) and soft carbon into an electron rich nano Fe0/FeS heterostructure embedded in thin-bedded graphene. The process is energy efficient and consumes 34 times less energy than conventional pyrolysis. Density functional theory calculations indicate that the electron delocalization of the FJH-derived heterostructure improves its binding ability with peroxydisulfate via bidentate binuclear model, thereby enhancing ·OH yield for organics mineralization. The Fe-based nanomaterial catalyst exhibits strong catalytic performance over a wide pH range. Similar catalysts can be prepared using other commonly available iron precursors. Finally, we also present a strategy for continuous and automated production of the iron-based nanomaterial catalysts.


  • Graphene environmental footprint greatly reduced when derived from biomass waste via flash Joule heating

    by Chao Jia, Mingyue Pang, Yuanda Lu, Yize Liu, Minghao Zhuang, Beibei Liu, Jiahao Lu, Tao Wei, Liang Wang, Ting Bian, et al.


  • Open Access

    Biosafety of human environments can be supported by effective use of renewable biomass

    by Fengbo Yu, Wei Zhao, Tao Qin, Wang Zhao, Yulian Chen, Xinyu Miao, Litao Lin, Hua Shang, Guodong Sui, Daxin Peng, et al.

    Preventing pathogenic viral and bacterial transmission in the human environment is critical, especially in potential outbreaks that may be caused by the release of ancient bacteria currently trapped in the permafrost. Existing commercial disinfectants present issues such as a high carbon footprint. This study proposes a sustainable alternative, a bioliquid derived from biomass prepared by hydrothermal liquefaction. Results indicate a high inactivation rate of pathogenic virus and bacteria by the as-prepared bioliquid, such as up to 99.99% for H1N1, H5N1, H7N9 influenza A virus, and Bacillus subtilis var . niger spores and 99.49% for Bacillus anthracis . Inactivation of Escherichia coli and Staphylococcus epidermidis confirmed that low-molecular-weight and low-polarity compounds in bioliquid are potential antibacterial components. High temperatures promoted the production of antibacterial substances via depolymerization and dehydration reactions. Moreover, bioliquid was innoxious as confirmed by the rabbit skin test, and the cost per kilogram of the bioliquid was $0.04427, which is notably lower than that of commercial disinfectants. This study demonstrates the potential of biomass to support our biosafety with greater environmental sustainability.